Storage of Information within the screw

Similar Questions

• Reading of information within the given date range

  Hi all
  
  Please can u help me to solve this: -.
  
  I need to get these employees who completed their 18 years within the specified date range.
  
  For example, If date1 = 2008-10-21 and date2 = 03/11/2008
  
  Then, I need to display information of all employees whose birthday falls in the range of dates and the date.
  
  Thanks in advance!

  Hello

  Try this

  SELECT *.
  OF test1
  WHERE (TO_DATE('21/10/2008','DD/MM/YYYY') - bdate) / 365,24 > 18 OR (TO_DATE('30/10/2008','DD/MM/YYYY') - bdate) / 365,24 > 18

  -Pavan Kumar N

• Asking only once and the storage of information.

  Hello

  I would like to start for the FIRST time to have my application to request a phone store so that number number so when you are prompted for the end user can choose to receive a text on my Web site with out having to put in the number evertime.

  From what I've read here you can't just of the information with the user information.

  I can do AJAX and the popup box.  But the storage and the first part only once I'm a little to the 'green' on.

  Thank you

  Probably the simplest way I can think to do is through cookies.  You can set a cookie that stores the phone number and another that tells you if you have requested the digit preceding.  Finally, whenever you launch the app, you check the second cookie, if it has not set will prompt you for the phone number, otherwise do not ask for it.

  An introduction to the use of cookies with JS can be found here - http://www.w3schools.com/JS/js_cookies.asp

• Peut funtion Vmotion and Storage Vmotion with Intel and AMD hosts within the same cluster

  Hi, I can do storage Vmotion OR Vmotion between Intel and AMD hosts within the same group?

  Thank you

  No, it is not possible to vmotion or storage vmotion between CPUs from different manufacturers - I heard rumors that two manufacturers are working on technology that will help in the future-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How to get information about the types within a user defined package

  Hi all
  Have a package with some types (user-defined) defined in the package specification. How to get information about the types and
  information about the columns of this type.
  
  for example:
  Create package mp is
  
  type t is record (no number is varchar2 (30));
  
  procedure a (m t out...
  
  Thanks in advance.
  
  userg

  G_user wrote:
  the req's, want to build a script dynamically using data dictionary
  so if possible, I take the name of the type within the package specification.

  Let me rephrase - is there a data dictionary to get information on the type defined by the user within a package specification

  Best approach will be to have a standard in the definition of data types.

  Have a process to follow the object definitions in the package if it is mandatory.

• How do I know the partition that is moved within the storage space?

  I'm currently moving the partitions of a table to reclaim space and I do not transfer to another tablespace, in other words, I just move into the storage space.

  The tablespace contains one table.

  The most difficult part of putting them in the same tablespace is now, that I could not easily identify which partition to date is moved. When I created the script to move partitions, I've sorted them all first.

  I asked the DBA_SEGMENTS and learned the segment_type is TEMPORARY and that the size continues to change right away.

  The nom_segment is "37.75756073" and does not say clearly what partition is moved.

  I know that the '37' part. It's a the file_id. But what is this "75756073"? I checked the object_id and data_object_id from DBA_OBJECTS, but he did not show everything.

  I questioned the block_id from DBA_EXTENTS, but neither did - it show the nom_partition.

  Any other ideas?

  SQL > select nom_segment, segment_type, nom_partition, dba_segments bytes/1024/1024/1024 GB

  where nom_tablespace = 'P_SGSN_1_WEEK. '

  order by nom_partition;

  NOM_SEGMENT NOM_PARTITION SEGMENT_TYPE GB

  ------------------------- ------------------------------ ------------------ ----------

  PARTITION TABLE PS_SGSN_1_WEEK P_20131202 314.199219

  PARTITION TABLE PS_SGSN_1_WEEK P_20131209 324.589844

  PARTITION TABLE PS_SGSN_1_WEEK P_20131216 333.359375

  PARTITION TABLE PS_SGSN_1_WEEK P_20131223 320.097656

  PARTITION TABLE PS_SGSN_1_WEEK P_20131230 303.691406

  PARTITION TABLE PS_SGSN_1_WEEK P_20140106 297.34375

  PARTITION TABLE PS_SGSN_1_WEEK P_20140113 313.320313

  PARTITION TABLE PS_SGSN_1_WEEK P_20140120 321.875

  PARTITION TABLE PS_SGSN_1_WEEK P_20140127 334.453125

  PARTITION TABLE PS_SGSN_1_WEEK P_20140203 324.6875

  PARTITION TABLE PS_SGSN_1_WEEK P_20140210 300.15625

  NOM_SEGMENT NOM_PARTITION SEGMENT_TYPE GB

  ------------------------- ------------------------------ ------------------ ----------

  PARTITION TABLE PS_SGSN_1_WEEK P_20140217 295.332031

  PARTITION TABLE PS_SGSN_1_WEEK P_20140224 294.609375

  PARTITION TABLE PS_SGSN_1_WEEK P_20140303 311.933594

  PARTITION TABLE PS_SGSN_1_WEEK P_20140310 318.066406

  PARTITION TABLE PS_SGSN_1_WEEK P_20140317 314.335938

  37.75756073 TEMPORARY 265.996094

  17 selected lines.

  Our version of Oracle RDBMS is 11 GR 2

  Watch LAST_DDL_TIME to the USER_OBJECTS partition (the name of the table would be OBJECT_NAME and the name of the partition would be SUBOBJECT_NAME "PARTITION TABLE" would be the OBJECT_TYPE) to identify the last partition that has been moved.  Given that your script is the partition names ordered, you would know the next parttiion after it - such next partition would be one that is currently "moved".

  Hemant K Collette

• Best practices for the storage of information from lead

  Hi all
  
  I use a qualification process using a script assessment of lead. Via this script our reps ask the potential customer 8 questions and a score is calculated.
  
  Now, the reps will begin the process to convert leads into opportunities - in order of priority according to the script of assessment score.
  
  Then information that is entered in the assessment script is stored in 8 fields in the lead record and is relevant to only one service in a hospital (anesthesia fx). This information is very valuable to us in the future - because it tells us about the potential prospects for the purchase of other products.
  
  Now, I want to make sure that this information is passed on the most appropriate way when wires are converted into accounts, contacts, and opportunities. My first thought was to create 8 new fields in the opportunity record and communicate with the record type and map the conversion of lead to these areas. Through reflection, this would help me with a large number of redundant data. Also the data will be regularly updated - which will cause problems with this solution.
  
  Another option is to display the fields of 8 lead and related information on the opportunity and contact record details page. Or I could pass data to the contact record and tell officials that this is where it should be updated in the future.
  
  I'm pretty new to OnDemand, so I couldn't be on the right track here! Any help will be much appreciated :-)
  
  Kind regards
  Allan

  Allan, once the lead is converted the lead record (with your 8 domains) is available as a related under the opportunity and contact records record. This allows you to make updates to these fields without having to do several times if you match during the conversion from lead.

• How the index data are managed within the cluster?

  Hello
  
  We are evaluating the consistency.
  
  Regarding indexes, am I right in thinking that the data in the index are stored in a (managed internally) cache on the same node that the attendant at the following indexed values? I'm not interested in getting the data in the index, but rather just to understand how the data in the index itself are stored or processed within the cluster.
  
  So in a 2 cluster node where an index is applied to a distributed cache that has only 2 entries, will there be a key cache on each node 1 {binary,} to enter key where the key points to the value that is stored on this same node? In other words, I'm sure that the index data to be spread out in the cluster in the case of a partitioned topology?
  
  Concerning
  Peter

  user11279467 wrote:
  Hello

  We are evaluating the consistency.

  Regarding indexes, am I right in thinking that the data in the index are stored in a (managed internally) cache on the same node that the attendant at the following indexed values? I'm not interested in getting the data in the index, but rather just to understand how the data in the index itself are stored or processed within the cluster.

  So in a 2 cluster node where an index is applied to a distributed cache that has only 2 entries, will there be a key cache on each node 1 {binary,} to enter key where the key points to the value that is stored on this same node? In other words, I'm sure that the index data to be spread out in the cluster in the case of a partitioned topology?

  Concerning
  Peter

  Hi Peter,.

  up to 3.4.x index have been supported only on partitioned topology, and Yes, the index on each node contain only the data corresponding to the entries that have their main copy on this node (referred to as entered local subsequently).

  The indexes are not stored in a cache, but they are managed under the information that maintains consistency in terms of backup (the map that contains local entries).

  The indexes are in 2 parts:

  -index to the front: this is a mapping of the cache key in an internal representation (Playback key card in the future) the value extracted with the extractor used to create the index of the entry to membership of the cache key (value extracted later)

  -reverse index (aka. reversed card): this is a map of the value extracted from a backup set of the keys of the map of entries which we extract the index key reversed with the extractor used to create the index

  The index can be sorted, which means that the index reversed a SortedMap (sort order is the order of the extracted values)

  Let's see an example. Assuming you have the contents of the following cache within a particular extension storage node:

  A--> Object (PositionX = 5,...)
  B--> object (getA = 3,...)
  C--> object (getA = 3,...)
  D--> object (getA = 4,...)

  The index forward in this node will contain:

  Binary (A)--> 5
  Binary (B)--> 3
  Binary (C)--> 3
  Binary (D)--> 4

  The reverse index will contain:

  3--> {Binary (B), Binary (C)}
  4--> {Binary (D)}
  5--> {Binary (A)}

  Where Binary (...) designates the internal representation (binary) of the... object.

  If the index is not ordered, then the order of iteration over the entries in the index reversed are not deterministic.

  If the index is ordered, the iteration of the entries into the inverted index will be as stated above. Also, you can convert the SortedMap inverted index in order to have the very useful headMap and tailMap and firstKey and lastKey methods.

  I hope this helps.

  Best regards

  Robert

• TestStand deployment error - error: unable to locate all the screws saved subVIs because it lacks a Subvi

  Hello

  I am a systems and software engineer based in Vancouver. I developed a test system automated using 2013 LabVIEW and TestStand 2013 with custom operator interface.
  I encountered problem 'lack screw' which is kind of weird because I went to analyze the sequence for the TestStand Deployment Utility and TestStand sequence editor > files broadcast tab.
  But when I tried to build the installer and reach the point ' called distribution screw, it always throws an error saying "an error occurred trying to read the error of the screw, possible because the screws are not saved in the latest version of LabVIEW. Do you want to save any changes now? ". I tried both (that is to say Yes and no) for this option, but it has not solved the problem.

  This is part of the original error message displayed in the TestStand deployment utility:
  " ***************************
  Then the treatment live...
  Error: Cannot locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.
  The chain of calls to missing screws:
  1 - ATE_AccelerometerTest.vi
  2 - CreateAndMergeErrors.vi (missing)
  3 - LogControl_CheckForErrorSendUpdates.vi (missing)"

  All screw missing come from userlib.

  Actions performed:
  -File of sequence analyzed by using the TestStand Deployment Utility and TestStand sequence editor
  -Checked "search directories" include all the necessary files/dependencies.
  -Mass to compile the directory of the missing screws
  -Added all the necessary files and folders in the workspace file.

  The result is always the same function according to the actions performed.

  Debugging last I did earlier, is that I tried to find the sequence and steps missing screws as shown above (for example ATE_AccelerometerTest.vi)
  and I discovered that the measure appears to be an empty action step. This would be possible even if it has already passed the analysis?

  Other considerations include:

  I'm using sp1 2013 LabVIEW and TestStand 2013. We tried the building three 3 computers and we only managed once to a freshly installed comptuer.

  Hoping to hear from you soon.

  Kind regards

  Michael Panganiban
  Engineering systems and software
  www.Synovus.ca
  [email protected]

  Hi all

  We were able to solve the problem. First of all to note is that the release notes in 2013 TestStand is obsolete and we confirmed engineer OR Austin TestStand 2013 works very well with LabVIEW 2013 SP1.

  Second, we played option deployment TestStand that solved the problem. Attached are the pictures.

  We have activated just the 'delete unused Components VI'. It could be one of the libraries (lvlib) we have included in the compilation, but we've not thought of it again because we have checked that all the screws are working. It could also be something else that I think is very hard to find from information. However, if someone had the same problem, this could be useful.

  Again, we return to using 2013 TestStand and LabVIEW 2013 SP1.

  I appreciate all comments and feedbacks. Otherwise, you can close this request for assistance.

  Thank you.

  Kind regards

  Michael Panganiban

  Engineering systems and software

• Error 1 occurred Armijo rule stepsize reduction failed to reduce the value of function within the maxiters

  Hello

  I try to use the VI of unconstrained optimization to fit a measured spectrum. However, each call VI, I get the error:

  Error 1 occurred Armijo rule stepsize reduction failed to reduce the value of function within the maxiters

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires controller GPIB be in Charge.

  Does anyone know what I'm doing wrong and how I can fix this problem?

  The VI for the stepsize Armijo rule reduction can be found here:

  \vi.lib\gmath\NumericalOptimization\qn_armijo rule stepsize reduction.vi

  In the current implementation, the spectrum is able to a rectangular spectrum. This may be the cause of the error?

  I have attached the screw that I use. They are written in LabVIEW 2010.

  Thanks Marc67 for your quick reply, but I found the error.

  It was pretty stupid, that I used a bad vector of departure for the unconstrained optimization VI, which was too low values.

• Pro-grammatically discover remote devices (cRIO or sbRIO) within the Local network

  Hi I'm developing an application where I need to configure my cRIOs. So first of all, I need to find out all the RIO within the network and configure one by one by selecting their IP address in the list.

  What someone has to know everything how to discover. I think there must be a solution that MAX discover any type of remote devices.

  Help, please.

  You specify the version of LabVIEW you use. In LabVIEW 2009, you can use the RT to target information VI for a list of all targets of RT on your local subnet.

  

• Try to build the application, the screw startup list is empty

  Hi all

  I am following the directions on this page:
  http://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/building_a_stand_alone_app/

  But somehow, when I get to Statup screw selection stage, the list is empty and cannot add the VI I intend to use it. Why is this happening? What step am I missing?

  Isaac,

  The first step in the help file you cite says «Open the LabVIEW project...» ».  You have your VI within a LabVIEW project?  If you want help with your Build, it would be useful to look at the project.  The best way to proceed is to implement the project (and all the screws, you wrote that belong to the project) within a Windows folder, compress the file (at one. Zip file) and fix it. Zip file.

  Bob Schor

• By comparing the screws

  Sometimes, I would compare the current VI to an earlier version. Comparison tools compares only memory screws and two screw in the memory cannot have the same name. So I save the current version as desktop:\temp.vi and then open the previous version of the CD.

  After the execution of tools > compare > screw compare and then close the screw outbuildings are fouled upward and then LabView and TestStand try to load screws of CD or complaining about dependencies.

  Is there a convention for renaming files and comparisons of VI running causing problems.

  Thank you

  JVH

  Check out http://digital.ni.com/public.nsf/allkb/3493C58EA0E842FA86256F86006142C0

  Down, he talks about it.

  By comparing the two screws of the same name

  You can compare the two screws of the same name, but these screws must reside in different LabVIEW projects, and you must open these screws of the project.

  "" Once you open the screw, select Tools "compare" compare screw to compare the two screws. Please refer to the beginning of this document for more information

• Pavilion G7-1338DX: lost the screws of the housing on Pavilion 17.3 "

  Hi people! I had to replace a bad hard drive in the laptop and somehow move the screws of the lower casing 12 like a fool... I'm usually careful about keeping the screws in a safe and marked place for what and whence they came. The service manual indicates that the screws are screws M2, 5 x 7.0 (page 50 in print, page 58 read in Adobe http://h10032.www1.hp.com/ctg/Manual/c03538328 ).

  However, when you try to order on this site, a warning to the owners of HP/Compaq laptop says that the repair can errs on the size of the screws (note the link highlighted yellow "Important notice"):

  http://www.laptopscrews.com/m2.5x7.htm

  "Please note that errors have crept in HP/Compaq manual with screw sizes. The error is usually in the diameter of the screw. An M2.5 indicated as an M2 or one indicated as a screw M2, 5 M3. If possible measure a screw before you order or order the screw in two diameters if you have doubts. You should also know that HP/Compaq manuals report measures the entire screw. "For a screw of M2.5x9 HP, please order a M2.5x8."

  Because I don't even have screws to measure, can someone confirm what are actually the screws of the housing 12 real background for a Pavilion G7-1338DX?

  Thanks in advance for any help!

  Hello @Ntact,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post on the matter with the screws and trying to help!

  The sizes provided in the service manual should be sufficient.  However, if you need help, then you can contact our telephone support HP.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com