Store tabular data in file TDM tiara.

Similar Questions

• PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  Hello

  PowerCLI - there cmdlets to browse the store of data for files/directories and their creation?

  If Yes, can you please let me know.

  I took a glance at the reference of the cmdlet, but can not find...

  
  Kind regards

  Dreamer

  You can use the data store provider.

  It is documented in the vSphere PowerCLI Administration Guide that was installed with PowerCLI.

• How to merge and write analog inputs, and export data to a tdms file?

  I have a vi who writes analog inputs in tdms files. I also want to write the analog output signals, which are 2d table entries in the same PDM file with additional columns representing the analog output signals. How can I get this feature?

  Ashaironix wrote:

  Hey Crossrulz,

  So you're saying that writing two files tdms with entries as HAVE and AO, will write everything in a file single tdms AOs and Ais?

  N ° you write in the same file, just different GROUPS.  TDMS is a hierarchical data format.  You have the file, group, channel.  Waveform data will actually in the channel data.  But you can have metadata on any level.  So, I do a group I and a group of the AO.

• How can I register all of the VMX files found in a list of stores of data with new names

  Hello-

  I'm trying to find a way to search through a given list of data and each discover a warehouse. VMX file, add this machine in the inventory I want to prepend the name of the machine as something different. That is to say, instead of "Machine1", I wish it were registetred as "auto-Computer1.  So, imagine I have an empty data center with 4 warehouses of data stored in a table $arrDatastoreToInclude.  I want to loop through each of these data stores and add all the VMX files I found back in the inventory.

  I know that I can use the following to get data warehouses I want:

  $dsindatacenter = get-data center $DataCenterName | Get-Datastore? | {$arrDatastoreToInclude - contains $_.} Name}

  But I have no idea how to analyze these data stores for the VMX files and what command to add them in the inventory.  Can anyone help?

  Try the following, it is based on the script of the position that Robert mentioned.

  You will need to provide a file (in $VMFolder) where unregistered virtual machines will be stored.

  The Set-VM cmdlet will take care of the rename.

  $DatacenterName = "MyDatacenter" $arrDatastoreToInclude = "DS1","DS2","DS3","DS4"
  
  $dc = Get-DataCenter $DataCenterName $dsindatacenter =  Get-Datastore -Datacenter $dc | ?{$arrDatastoreToInclude -contains $_.Name}
  
  $VMFolder = "MyFolder"
  $ESXHost = Get-VMHost -Location $dc | select -First 1
  foreach($Datastore in $dsindatacenter) {
      # Collect .vmx paths of registered VMs on the datastore     $registered = @{}
      Get-VM -Datastore $Datastore | %{$_.Extensiondata.LayoutEx.File | where {$_.Name -like "*.vmx"} | %{$registered.Add($_.Name,$true)}}
  
     # Set up Search for .VMX Files in Datastore    New-PSDrive -Name TgtDS -Location $Datastore -PSProvider VimDatastore -Root '\' | Out-Null    $unregistered = @(Get-ChildItem -Path TgtDS: -Recurse |         where {$_.FolderPath -notmatch ".snapshot" -and $_.Name -like "*.vmx" -and !$registered.ContainsKey($_.Name)})
      Remove-PSDrive -Name TgtDS
     #Register all .vmx Files as VMs on the datastore   foreach($VMXFile in $unregistered) {
          New-VM -VMFilePath $VMXFile.DatastoreFullPath -VMHost $ESXHost -Location $VMFolder |
          Set-VM -Name ("Auto-" + $_.Name)
     }
  }
  

  Unregistered virtual machines will be saved with Displayname that is present in the VMX file.

  If this would cause a conflict with VM already registered, you can use the Name of the cmdlet New-VM parameter

• How to store characters in result file and display on front panel

  Hello

  currently I am working on the FPGA project.i want data acquired from FPGA board.i want to know on how to store characters to the file and contineous each character display on the façade in the string format.

  I'm full up to characters on the front display, but display characters only when I want all characters in string format.

  I don't see how this question fits in any digital i/o, but it looks like you just need a change of register with the concantanate string function.

• Download the virtual machine in a store of data with powercli

  Hello

  How to list the files of virtual machine on a store of data with PowerCLI

  I have a virtual machine and I want to see all the files in a data store (such as hard,.-flst.vmdk, .log, .nvram) using powercli. Is this possible?

  TKS.

  Try the following, it uses a function of my position of friendly units .

  Function Get-FriendlyUnit {}

  <>

  . Numbers converted small binary multiples SYNOPSIS

  . DESCRIPTION the function accepts a value and him will convert

  in the largest available binary unit.

  . Author NOTES: Luc relaxing

  . Value of the PARAMETER

  The value to convert.

  This number must be positive.

  . IEC PARAMETER

  A switch to indicate whether the function should return the CIS

  Unit, or the names of the units most commonly used names.

  The default is to use the commonly used unit names.

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456

  . EXAMPLE OF

  PS > 123456 | Get-FriendlyUnit - CIS

  . EXAMPLE OF

  PS > Get-FriendlyUnit-value 123456,789123, 45678

  #>

  (param

  [CmdletBinding()]

  [parameter (mandatory = $true, ValueFromPipeline = $true)]

  [double []] $Value,.

  [switch] $IEC

  )

  Begin {}

  $OldUnits = "B", "KB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB".

  $IecUnits = 'B', 'KiB', 'MiB', "GiB", "TiB", "PIF", "BANK", "ZiB", "YiB".

  If ($IEC) {$units = $IecUnits} else {$units = $OldUnits}

  }

  {in process

  $Value | %{

  If ($_ - lt 0) {}

  Write-Error "Numbers must be positive."

  breaking

  }

  If ($value - gt 0) {}

  $modifier = [math]: Floor([Math]::Log($_,1KB)))

  }

  else {}

  $modifier = 0

  }

  New-object PSObject-property @ {}

  Value = $_ / [math]: Pow(1KB,$modifier)

  Unit = & {if ($modifier - lt $units. {Count) {$units [$modifier]} else {'1KO E {0}' f $modifier}}

  }

  }

  }

  }

  foreach ($vm in (Get-View - ViewType VirtualMachine - property Name, 'LayoutEx.File')) {}

  $vm. LayoutEx.File |

  Select @{N = "VM"; E = {$vm. Name}},

  @{N = 'Name'; E={$_. Name.Split(' ') [1]. "Split('/') [1]}},"

  @{N = "Path"; E={$_. Name}},

  @{N = 'FileType'; E={$_. Type}},

  @{N = "Datastore"; E={$_. Name.Split(']') [0]. TrimStart('[')}},

  @{N = "size"; E = {}

  $val = get-FriendlyUnit-value of $_. Size

  "{0:n2} {1}" f $val. Value, $val. Unit

  }}

  }

• Find the store of data with more free space.

  So I'm trying to build a script to configure the virtual machine.

  I'll have it retrieve the node to keep newly available vm out based on the cluster, I said to use. I'm just using the Random function to do that then I select a node in the cluster.

  Where I have questions, how can I

  find the data store less used, based on a particular data store naming scheme.

  I want to say is:

  Hypathetically, I for example named data warehouses:

  store data-prod-01 200 GB free

  store data-prod-02 500 GB free

  free data-prod-03 10 GB store

  free data-qa-01 200 GB store

  free data-qa-02 1000 GB store

  I want to throw in a piece of code to tell him to watch data warehouses "datastore-prod *" and place the virtual machine on the store of data with the most space. (that's assuming that the vm will agree on the DS and let fresh generals)

  I guess I want to know if it is possible?

  I would also be concerned about scenario that perhaps the vm should I build just will not match on any of my other data store. I guess I need a logic to check if it is still possible.

  This is more than a wish rather than a necessity. I'm thinking if I just read the info, or use a cvs file after running the script. Any recommendations would be greatly appreacted.

  Hello, drivera01-

  You should be able to do this with a very small amount of code.  Download all data warehouses that correspond to the model name, sort free space (in descending order) and select the top one.  As:

  ## get the datastore matching datastore-prod* that has the most freespace$oDatastoreWithMostFree = Get-Datastore datastore-prod* | Sort-Object -Property FreespaceGB -Descending:$true | Select-Object -First 1
  
  ## if the freespace plus a bit of buffer space is greater than the size needed for the new VMif (($oDatastoreWithMostFree.FreespaceGB + 20) -gt $intNewVMDiskSize) {<# do the provisioning to this datastore #>}else {"oh, no -- not enough freespace on datastore '$($oDatastoreWithMostFree.Name)' to provision new VM"}
  

  The second part, where it checks for sufficient freespace on the data store that has the most free, can be updated to behave as you need, but that should be the basis.  How does this look?

• script return do not store any data info

  Hi everyone, I think I'm missing something simple but impossible to find the tail of it.

  Here is a commonly used script that I've used in the past, but since I moved to another machine its not return don't not data store news.

  My CSV is full of great info, but the column for the data store is empty.  Thanks in advance.

  $VCServerName = "myVcenter".
  $VC = to connect-VIServer $VCServerName
  $ExportFilePath = "c:\Export-VMInfo.csv".
  $Report = @)
  $VMs = get - VM
  $Datastores = get-Datastore. Select Name, Id
  $VMHosts = get-VMHost | Select Name, Parent
  {ForEach ($VM to $VMs)
  $VMView = $VM | Get-View
  $VMInfo = {} | Select VMName Powerstate, OS, file, IPAddress, ToolsStatus, host, Cluster, data store, NumCPU, MemMb, DiskGb, DiskFree, DiskUsed
  $VMInfo.VMName = $vm.name
  $VMInfo.Powerstate = $vm. PowerState
  $VMInfo.OS = $vm. Guest.OSFullName
  $VMInfo.IPAddress = $vm. Guest.IPAddress [0]
  $VMInfo.ToolsStatus = $VMView.Guest.ToolsStatus
  $VMInfo.Host = $vm.host.name
  $VMInfo.Cluster = $vm.host.Parent.Name
  $VMInfo.Datastore = ($Datastores | where {$_.}) ID-match (($vmview.)) Data store | Select - first 1) | Select the value). Value} | Select name). Name
  $VMInfo.NumCPU = $vm. NumCPU
  $VMInfo.MemMb = [math]: round (($vm.)) (MemoryMB), 2)
  $VMInfo.DiskGb = [math]: Round ((($vm.)) Hard drives | Measure-Object-CapacityKB property-sum). Summary * 1 k / 1 GB), 2)
  $VMInfo.DiskFree = [math]: Round ((($vm.)) Guest.Disks | Measure - Object - property FreeSpace-sum). Summary / 1 GB), 2)
  $VMInfo.DiskUsed = $VMInfo.DiskGb - $VMInfo.DiskFree
  $Report += $VMInfo
  }
  $Report = $Report | Sort-Object VMName
  IF ($Report - don't ' ') {}
  $report | Export-Csv $ExportFilePath - NoTypeInformation
  }
  $VC = disconnect-VIServer-confirm: $False

  Strange, I just ran your script, and I get the info from the data store in the CSV file.

  Error messages?

  I guess that Get-Datastore returns all your data warehouse?

• ESXi and store design data

  Hi all -

  I find VMware site but can't find any info about my installation and hope someone can help me with a few questions about the configuration of the data store, or maybe someone has implemented a similar setup in their environment.  Any comments would certainly be appreciated

  
  Questions: I have two 5.0 ESXi host and will link to 5300 VNX via iSCSI. Each ESXi will host virtual machines about 6-Windows 2008 R2 File servers each - VMs C: 50 GB on iSCSI SAN disk. Data store single for example 500 GB for all readers of VMs C: create?
  In addition to the C: partition, each VM file server will host several partitions greater than 2 TB data, for example a 3 TB S: and T: 2 TB partition I create a store of data for each partition and under the VM iSCSI, select change settings, select Add hard drive, and then navigate to the data store for each VM partition? This means that I will create a data store for each partition of data correct?

  Thank you

  .

  almost:

  ESXi 5.0 supports LUN/data warehouses with up to 64 TB (without extensions). = RDM in physical compatibility ((pass through)) mode

  AND

  2 TB less 512 bytes for virtual disks on VMFS datatores. = Of VMDK more RDM in virtual compatibility mode

  André

• Storage Vmotion several stores of data to CSV

  I have 6 virtual machines with 13 discs each on 72 different data stores (limit of 2 TB was really limited).  Extensions led to terrible performance, then the best course of action was to individual records on individual data warehouses (1 1 ratio of the data store vmdk).  We are now migrate all these 72 vmdk of 72 new data on the new storage warehouses.  In the past, we did these VMotions of storage via PowerCli data store or virtual machine for a store of data specified in a comma-delimited file.

  I was trying to understand what would be the command line that I could insert the drives and appropriate in the command data warehouses "for each.  The command set-hard drive wasn't working.  You see where I was wrong?

  [vSphere PowerCLI] C:\powershell > get-datastore HO-CX3-CF-Phopdnode03 - 1 m | Get-hard drive | % {Set-hard drive - HDD $_ - data store "ho_na3_phopdnode03_12"}
  Confirm
  Are you sure you want to perform this action?
  Operation "store parameter data: ho_na3_phopdnode03_12."the Target "phopdnode03.vmdk".»
  [Y] yes [A] Yes to all [N] no [L] no to all [S] Suspend [?] Help
  (default is "Y"):
  Together-hard drive: 2011-08-09 15:17:13 the value-hard drive error caused by file
  /vmfs/volumes/4e4178ca-0c93f7f8-7141-002655503f5d/phopdnode03/phopdnode03.VMDK
  At line: 1 char: 72
  + get-datastore HO-CX3-CF-Phopdnode03 - 1 m | Get-hard drive | % {Hard disk set < < < <}
  {- Hard drive $_ - data store "ho_na3_phopdnode03_12"}
  + CategoryInfo: NotSpecified: (:)) [game-hard drive], FileFault)
  + FullyQualifiedErrorId: Client20_VirtualDeviceServiceImpl_MoveVirtualHar
  dDiskFile_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevi
  it. SetHardDisk

  The cmdlet Get-hard drive with the parameter data store also returns the hard files that are not connected to a virtual computer.

  A svMotion has update .vmx file the VM as well.

  Maybe try it like that

  Get - VM - Datastore ' HO-CX3-CF-Phopdnode03 - 1 m | Get-hard drive | `

  where {$_.} Filename-match "HO-CX3-CF-Phopdnode03 - 1 m"} | `

  Together-hard drive - data store "ho_na3_phopdnode03_12".

• issue of configuration for the store of data/LUN iSCSI

  Hi all!  I am all new to VMWare and iSCSI, and I have a question about data warehouses regarding being mounted on an iSCSI target.

  Here's my setup.  I have a Dell PowerEdge R810 connected over a link to 10 GB dedicated to a Dell PowerEdge 2950 that I use as a SAN.  The R810 has no hard drives in it, it starts ESXi on a redundant configuration of SD card integrated into the server.  My SAN software is Server 2008 Enterprise with Microsoft iSCSI software Target 3.3 installed.  I created target 1, LUN 0, 800 GB .vhd file sitting on a NTFS partition and set up a store of data on it in VCenter.  The data store is the size of the entire iSCSI, 800 GB target.  I have my first virtual server up and get 50GB of space between the data store.

  Here is my question: can I create several virtual machines using the data store I put in place?  I know it sounds like a stupid question, but my concern comes from some reading I did on several computers, access to a single LUN.  If I set up another virtual machine, it will explode on my SAN file system as two virtual machines would be to access the same big VHD file on the NTFS partion, or I'm far from base?

  Issue of bonus points:

  I have an another R810 that I will be online soon.  Assuming that I am OK to add more virtual machines of my first machine, pourrais I connect this box in the data store as well and create virtual machines, or should I set up a separate data on another iSCSI target store?

  Thanks for your patience with a new guy.  I searched and read for hours, and I could have read too much so I thought that I had just askt experts.

  Hello and welcome to the forums.

  Can I create several virtual machines using the data store that I put in place?

  Yes.

  If I set up another virtual machine, it will explode on my SAN file system as two virtual machines would be to access the same big VHD file on the NTFS partion, or I'm far from base?

  No, you should be fine.  One thing to keep in mind is that the Windows/MS iSCSI target is not a supported storage solution.  There could be problems of scalability with iSCSI Windows/MS, but you'll be fine in a VMware perspective.

  I have an another R810 that I will be online soon.  Assuming that I am OK to add more virtual machines of my first machine, pourrais I connect this box in the data store as well and create virtual machines, or should I set up a separate data on another iSCSI target store?

  You could, but I personally would put in place a different data store on another iSCSI target.

  Good luck!

• How to remove a store of data with force

  Last week we did a migration of old data spinning again spinning. After in the opposite direction of all the virtual machines to the new file server, we made all virtual machines online since the new file server. Now the thing is, I can't delete the existing data store (old spin). When I tried to delete the VC data store, it throws an error:

  

  Y at - it a command/tip to remove the store of data with force?

  

  Thank you

  Ganesh

  See this thread:

  http://communities.VMware.com/thread/89271

  André

• Remove folders in a store of data through the VI Client?

  When I browse a store of data via VI Client, I can delete individual files, but not files (delete button grayed). Is it normal?  I can remove them if I FTP to the ESX host and do it from command line.

  It isn't really a problem, but more than a curiosity.

  Don't you can't delete the files via the browser of VIC data store.

  You can delete the folder via Winscp- http://winscp.net/eng/download.php (if you do not want to do it from the command line)

• Good way to expose tabular data?

  Hi all
  
  Consider the following:
  
  http://joshbeall.com/personal/donation_detailview.PNG
  
  The data here are displayed in a table. Two columns, the left column indicating the name of the field, and the right column shows the data for this field.
  
  In HTML, it's pretty easy to do with a table. That's what a table has been designed for (covering tabular data). In Flex, what is the appropriate way to do so? I considered the DataGrid, but it is really designed to show several records, with a horizontal layout (header line, with one additional line per file). What I want is to display only a single record, with one row for each field in the result set.
  
  What is the way to Flex for data like this? I am a newcomer to Flex (ASP.NET fact for the last 2 years), and I am aware that this is very much a matter of beginner.
  
  -Josh

  Try the grid pane. You will find in the "Layout" of the tree of the component folder.

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support