Store the result of SQL in the local file?

Similar Questions

• Installation problem: (there is not enough free space to store the temporary files of Windows installation)

  I install Windows 7 Ultimate update on Vista Ultimate. Compatibility check says I can go for it.

  I have 348 GB of free space and 2.4 GB of Ram. I run Disk Cleanup and is are free programs on hard drive. When I run the installer, it gives me this message

  There is not enough free space to store the temporary files of Windows installation.

  I'd appreciate any help to overcome this problem.

  Tried the fix you suggested. He changed nothing

  You may be able to mark the partition on which is installed the operating system as being active.

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click system and Maintenance.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click the disks as storage management.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action.

  Could also contribute to:

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disable startup programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Also:

  You need more than half of your drive is empty instead upgrade. If your reader is 1.0 TB (1, 000 GB), you need 500 GB + to be free.

  If you cannot free enough space, you need to move data to external storage.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Is it possible to control the local file system access?

  Is it possible to control installed programs access to the local file system content in the same way windows internet access firewall controls?

  That is, allow a program installed in "C:\Program Files\Test\" with the name test.exe access directory folder for writing and for reading Documents. Everything else is denied by default, in the case where he wants to read 'Desktop\Private lettre.txt' user will ask if I want to allow this.
  I found several programs with this feature, but they are outdated and do not support win7 64 bit :(
  CoreForce and online Security Suite (ESS) Solutions

  Hello

  Thanks for posting your query in the Microsoft Community Forum.

  Based on the information, it seems that you try to use a program to block programs installed to access the directory folder for writing and My Documents only for the reading of the code.

  It would be useful that you can answer these questions to help you further.

  1. you try to write an access program directory folder for writing and My Documents only for playback?

  2. How are you trying to code this program?

  If you try to write a program, the question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for further assistance:

  MSDN forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Access to the local file System on JCS-SaaS

  Hello

  I am trying to access the local file system of my JCS-SaaS cloud with two options below. But it doesn't work anyway. Can you please give me some ideas to move my local file to domain JCS.

  Doc reference: http://docs.Oracle.com/cloud/latest/javacs_gs/CSJSU/GUID-1452AA1C-5B32-4c68-845E-A7802344A523.htm#CSJSU7273

  (1) using the file browser

  I have deployed the sample project given with SaaS - Cloud Java SDK extension. I am able to see the page but could not do anything on this page.

  Please see the attachment for the same thing. Nothing works on this page. He works for one of you?

  (2) using the file system Shell access: I am getting following error. Can you please.

  > java-jar %SDK_HOME%/lib/javacloud.jar - a http://SFTP.US2.cloud.Oracle.com:20 u [email protected] -id inaccenturetrial00450-TR javatrial2180 - fs Java shell access file system service

  [TIP] - check your network connections. If you are behind a proxy http (s), try using

  the option - httpproxy

  [TIP] - the service is perhaps out of service. We can also host name or the name of the port

  an error in the url http://SFTP.US2.cloud.Oracle.com:20

  [ERROR] - java.net.ConnectException: Connection timed out: connect

  Thanks in advance

  Samy

  I know that there was a problem at least on an older instance for the shell, however in the latest versions is should be fixed. Have you tried with the proxy as parameter suggests the error message? Also "-d" flag provide you additional details of debugging. Then try something like:

  java-jar javacloud.jar - user username - fs - id oracletrialXXXX-TR javatrialXXXX - dc US2 - hp host: port d

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• How can I save my documents of clouds on the local Adobe DC file? I can read my documents on the cloud, but I can't play them on the local file... Thank you

  How can I save my documents of clouds on the local DC Adobe file on iPad?

  I can read my documents on the cloud, but I can't play them on the local file...

  Thank you

  This is a help your device-related topic: Adobe Acrobat help for iOS: managing files and folders

  Saving files locally

  To save the files locally on your device:

  • Use iTunes to synchronize the file to your device.
  • Send an email with a PDF attachment to yourself and open it with Acrobat Reader.
  • Download the file to your device via a 3rd party like Dropbox service.

• Preview in the browser opens the local file instead of the url in DW CC 2015

  In 2014 Dreamweaver when I defined a site, I check it too remote and test server since they are the same. Once I finish editing I use Ctrl + Shift + u to upload to the server and if it is not still open in the browser, I press F12 to preview, and he opens the url. In 2015, Dreamweaver, I uncheck/remove the test server and leave only the remote server for so I have a defined test server, whenever I have downloads on the server automatically (which is annoying if you're not done with your changes yet or you have a little time of latency on your FTP connection). It's bulky, since it's a habit whenever I have some changes and download only when I'm about to test the changes. With the undefined testing server, when I press F12, the DW redirects to the local file instead of the URL defined in site settings. Now, I have to type the full url for each page I test. It is an approach back the previous version. Either enable in the browser preview, open the real link, as defined in site settings or please have an option to disable the auto push when recording. Thank you!

  First of all, you are right in your new configuration that remote and testing server should not be in the same.  It is not a good habit to get.  However, without a test in place server, DW will only use the local file to test because you don't want to push the Webcam page live on the server until it is complete.  In this case, DW creates a temporary file that you can view on your local computer.  In general, it is recommended to have a test server, if that exists within your local environment with local installation of WAMP/MAMP or Windows Server.  Or a specified test server environment that is not accessible to the public where you can test.

  In addition, to save them automatically download to the server and overwrite the file direct download or not, those are 2 settings to DW within which can be displayed/hidden.  First of all, in the DW preferences, there is a setting for "Preview in browser".  In this context, there is a checkbox to choose whether to display a preview with a temporary file.  If you have no other choice then to use the server as a test platform, you probably want to check this box to preview using a temporary file rather than overwrite the direct file each time.  Then if you go to the server management and change your test server, go to the Advanced tab and uncheck the box for "check automatically download files on the server.  This will disable the download file automatically the file on the server when you save, allowing you to download only when you preview and test.

• Question of access to the local file CS6 road

  I have an external USB drive with all the files on my local website for the customers, this disc starts to behave badly. I already backed up the files on another drive and I need to know if I unplug and do not take into account the original USB and attemnpt to access the files copied from another disk will be the paths automatically change?

  For example, if I have a folder with a path

  Original drive / folder with the local files / localdreamweaverfolder

  and try to access the same files with the original drive path change to

  Disc 2 / folder with the local files / localdreamweaverfolder

  will there be a problem?

  R

  You must change the site definition to point to the new location on the new drive. You should be golden, once you do this.

• LoadFile() cannot load the local file?

  My program works OK in Director, also OK on the web, but can't work on local. It is said after post like Shockwave and HTML file when the Director runs the HTML code automatically, the DCR in HTML file works fail. I am looking for reason, find, this is because one sentence of the program:
  Member ("World"). LoadFile ("myModel.W3D", true, true)
  
  In Director, it works. myModel.W3D is 'file:///D:/MyDirectoty/myModel.W3D '. On the Web, that's OK too. At this time, myMode.W3D is actually "" http://www.myWebSite.com/MyProgramDirectory/myModel.W3D ". " But if I open the HTML published, the loadfile() cannot work. Why?
  
  It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?
  

  Quote:
  Posted by: WrongAgain
  It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?

  Bingo-test - this is a safety feature to prevent the shockwave files accessing your file system.
  You can disable this security feature by placing your project published in the folder called «DSWMedia» shockwave

  -Ben

• How to get a glimpse of the local file

  DW is currently set up for a preview in the browser using the file on the remote server, which is not what I want.
  I spent the last hour looking for the preference that will direct the browser to display a preview of the local file. Will someone please tell me the right preference?
  Thank you

  This means that you have set a test server for your site. You probably
  does not need one. You develop static HTML pages? Or are you using
  ASP/.net, PHP, CF, or JSP pages? If the former, and not the last, then
  delete the definition of the site definition test server (just set it
  No) and who will take care of it.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "edrobinson" wrote in message
  News:f611uc$E82$1@forums. Macromedia.com...
  > I'm sure she won't see a preview of a remote file...
  > When I hit preview in the browser, the connection dialog box appears, and then he warns
  > me
  > It will update a file on the testing server. I click No. and the browser
  > open
  > upward with a http URL of the remote file in the address box.
  >

• 404 error when viewing the data on the local file

  Hello

  In the www of the project folder I have file app.xml with some data deserialized when the application starts. I use jQuery GET to read the parameters as in the example:

  $.get ("app.xml", {function (data)})

  $("#mac").val ($(data) .find ('macAddress') [0] .innerHTML);

  });

  The question starts with trying to serialize the new data in the file. The easiest way is to use the POST method (I tried also to XMLHttpRequest and FileWriter):

  $.post ("app.xml", {function (data)} ")

  .find('files').Append $(this) (data);

  });

  When I run this function, console responds with a kind of access problem (while get works very well):

  POST http://192.168.1.11:3000 / App.xml 404 (not found) send @ jquery - 2.1.4.js:8630ajax

  I've read about similar problems, the solution was always plugin whitelist cordova. In my case it did not work, in the browser, or the android app.

  config.XML:

  < plugin name = "cordova-plugin-whitelist" source = "MNP" spec="~1.2.1"/ >

  (...)

  < access origin = "*" / >

  < allow intention href = "" * "/ >"

  < allow navigation href = "" * "/ >"

  < platform name = "android" >

  < allow intention href = "*" / >

  < / platform >

  It seems to me that I miss some privileges to write data, but it's weird for me that it does not work even in the browser. How should I properly store the parameters of the program?

  You are not allowed to write in this directory. You can watch using the plugin file to write parameters to the eligible repertoire, or seek a solution as Local storage for you.

  Chris

• RH8 and where it stores the project files

  Hi all, I'm supporting some of my colleagues in another country who need to connect to my HR project through our local corporate network remotely. The project is using Robo SourceControl 3.1 and HTML RH8 (webhelp). They're running Win XP SP3 (I know, I know).

  I can get them connected to the project the RSC OK, but when you open the project in RH8 it takes hours and hours! The local store of the project is a local drive, such as c:\RH8.

  They have admin permission on their PC.

  We noticed a thing, it is that the files in the folder C: drive are also somehow their way in Office user profile (desktop icons are disabled on the installation of the company). The profile is stored on the local network and fills his profile space - but I suspect that it is also the cause of the epic slow.

  Any ideas on how I can stop HR mysteriously taking c: in the user profile?

  You may have already done this, but have you tried to remove the. PCD file before opening? Who can help a bit.

  Is there something custom in your project: large attachments generated HTML files, etc. ?

  Take a bow

  Willam

• Opening folder stored on the local file (working on the intranet) Server

  Hi, after several hours of searching online and every solution possible workaround I could think, I ask the community.

  I am trying to replace the word by muse to work to rebuild our wiki or intranet maintenance. The problem I have is that when I try to create a hyperlink to a file stored on a network file server, muse will always change my way to weird code... If I change the code in dreamweaver, it works. Problem is everyone must be able to change the "site" so that dreamweaver is not an option. I tried to insert html code but it messes with my layout and I am the only mechanic with some COMPUTER skills so we can not go this route. I need to make a link to lets say "Y:\procedures". Muse will change either to http://Y:\procedures or C:\Users\madjoe\AppData\Roaming\Microsoft\Windows\Network Shortcuts\Y:%5Cprocedures. I really don't understand how microsoft word can he do it perfectly but muse adobe can not...

  I that this is impossible, we usually pay for muse and try to get something else.

  I you thank all in advance and I hope that you will be able to help me.

  I don't really get how microsoft word can do it without fault but muse adobe can not...

  It is a matter of point of view, I'm afraid. As far as Muse is concerned, it awaits your URL for proper server paths, not the local filepaths and given that, solve the network path mapped to its native folder URI and characters for the hex code conversion is actually what to expect. You don't have that here on misunderstanding how actually the Word does not have things just in specifications and relies on many specific Windows Automation. So whatr, where appropriate, all right, you have just expectations wrong. Regarding your real issues, you can at least do precede your URL with the file:// Protocol Manager and use the correct URI notation with oblique, but at a fairly general level that you will always have problems with your overall approach. You should really consider the activation of a local web server and configure it to manage all the paths of files while serving as a go-to-global map for all employees. Your pages are going down, anyway. Instanxce what for if a resource is not actually mapped to a drive Y: on one of your computers? The overall approach is prone to errors 1 million, as, I must say once again, you are effectively closing a lot of security of Word Automation. And to compeltely ruin your day with more bad news: change your development environment won't solve all of these questions. You may be able to fix some URL, but the other stuff is probably still not going to work as she would be relying on the DOM of Word template and other things.

  Mylenium

• Store the RAW files on a network drive. It work?

  So I have a problem with my wife :-). We working with photos and currently have all the photos and the LR library on a single computer.

  The database and the vignette prevs are on an SSD drive in order to speed abd that RAW files are the classic storage. The problem is that we defend whose turn it is to use the desktop computer. So I thought to share the same RAW, DON'T SHARE THE SAME LIBRARY photos.

  1. my idea is to have two computers with SSDS and first double the library so that we start with the same set of parameters and photos.

  2. then I install the disk with RAW photos on a network drive: a small server, a router with connectivity HDD etc and point both libraries at the same place

  3. then I'll work on my wife library and mi on hers. Libraries will change gradually from their content, but RAW photos will remain on the network drive.

  QUESTIONS RELATING TO THE:

  1 is current wifi technology fast enough to deal with this type of use? SATA drives are faster than wifi, I guess, but I notice a big difference assuming the thumbnails (previews) are stored and generated on the local machines?

  2. can anyone suggest what equipment to choose in order to have a disorder of the system operation without?

  3. is there a way to protect RAW to be moved to a different location or renamed files? For example, my wife creates a folder and import photos there names and he "birthdya of my children." I know that she often made mistakes in order to my computer, I will import the folder to my library (to have access to the same set of photos) and change the name of the "birthday of my children." This will rename a folder existing physically on the HARD drive so my wife can no longer access it once the name of the folder has changed. Any ideas to avoid this kind of problems?

  4. is there a feature that allows LR watch certain folders for new folders\files automatically so that when my wife imports a new photo session, it will automatically appear in my library as well?

  In general, I would like some feedback from experts if my ideal is OK or not. Or perhaps there is another solution to my problem? Cloud Internet storage is out of the question because my internet is not that fast (I live in a forest area and not rely only on the wireless internet, cable or fiber optics).

  Answers

  1. It depends on your wifi connection, I think. Certainly some wifi will be fast enough. I think that the only way to know is to try it.
  2. I'm sorry, I can't
  3. In your operating system, you can lock the files (make it read-only), but of course this can always be overridden. The best approach, in my opinion, agrees that once you give a name, the rule is that you cannot rename it. And beyond, even better would be to use keywords, captions and other metadata structures to organize instead of the folder names, in which case rename in your catalog is not a problem. (Of course, there many other benefits to using Lightroom structures to organize instead of organization record)
  4. Yes, you can set up a "spy case" in Lightroom so that it will automatically import new photos in this folder.

• BI Publisher - save the report to the local file system

  Hi all
  BI Publisher is it possible 11 to deliver a scheduled reports in a local file system? If it is possible, how?
  
  Tnks

  It is not possible. Please open an emergency room (application development) with the support of the Oracle.

  concerning

  Jorge
  p.s if this answers your question please grant points, and then close the message