HP officejet 8699 N911: enlarge or reduce to printer

Similar Questions

• OfficeJet Pro 8620: enlarge the copy on 8620

  How not enlarged copies on this machine?

  To enlarge (or reduce) copy size on the Officejet Pro 8620 follow these steps:

  • From the Control Panel, select copy.
  • At the bottom left of the screen is a small gear, select this option.
  • Scroll down to settings, in the lower part is resize.
  • Click on resize, and select the appropriate as the custom size option, select the scale desired, fact factor.

• Enlarge and reduce to a minimum the touchpad

  Hi, I was hoping that someone could tell me how to turn off enlarge and reduce to a minimum the function on my touchpad when you browse the internet. Thank you.

  Hello

  This will depend largely on the type of touchpad to your.  If it's a Synaptics device, try the following.

  Open windows control panel, open the mouse, click the device settings tab and then click on the button "settings".  Look for an entry called "Pinch zoom", click it, and then remove the check mark from the box for "Enable Pinch Zoom".  Click apply and then click Ok to save the setting.

  Kind regards

  DP - K

• HP Officejet 6500 a increase or reduce a document before copying

  HP OFFICEJET 6500 A MODEL #: CN575A

  My printer has the ability to increase or decrease the size of a document before you copy it?

  Thank you

  RF

  Redfiero,

  Yes it does, but you'll have to read the manual from pg45.

  I was unable to d/l the manual refer to something better, like HP's PFD manual has not completed its download.

• HP Officejet Pro 8620: HP OJ Pro 8620 print several reports of unwanted situation

  I have a HP Officejet Pro 8620 and twice, it will print several reports on the State printer unwanted. Last night he printed 12 reports on the State and outside that of the total number of printed pages changingon the report, progress reports are the same.

  The printer is on a network, especially with Mac OS, but I have a laptop Windows 10.

  I tried the recommendations of the previous posts to run Doc Scan but this so far have found nothing wrong and has not solved printing unwanted status reports. Report added below printer if it helps.

  Any help would be greatly appreciated.

  

  Hey @Dan0181,

  Welcome to the Forums of HP Support!

  I see that your printer Officejet 8620 e-all-in One prints a lot of status reports. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once, while the printer is on, remove the power cord at the back of the printer for one minute. Then, please let me know if you print when beginning status reports or if they start themselves as well as if there are no messages on the printer when trying to print. Once I know more than I should be better able to help.

  Please let me know if the above prevented printing reports. In the affirmative, please let me know by clicking on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8620: iPad connects to the printer

  My iPad 2 Air do not print to my HP Officejet Pro 8620 although my iPhone 6 prints very well so I don't know the connection Internet is good and the printer works

  Hello

  He recently lost connection or is this the first time you tried?
  
  Try to restart your iPad look - it's a simple solution that sometimes allows to restore the connection to the printer.
  
  Other things to check would be that there has been no recent changes to the wifi password.

• In our officejet 7000 E809 black ink is not printing. We are not alone.

  In our officejet 7000 E809 black ink is not printing. You are looking for here we are not alone: http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead/Black-Won-t-Print-HP-OfficeJet-7000-E809a... We have replaced the cartridge. How can this be repaired?

  In fact, don't you worry. I figured out how to clean the print head. And fixed it. Thank you.

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• HP Officejet Pro 8620 e-all-in-one printer windows 8

  Printer e-all-in-one-HP Officejet Pro 8620 Windows 8.

  wireless printer is. printing from iphone is OK

  Since my PC win 8 not sending a file to filesgo-printer - printer not respongding - no message.

  I have install new printer 8620 on 8600 series of drivers printer or printing only from my PC

  How can I fix the thanks of printing problems

  Hi @yosiwajcenberg , welcome to the forums there.

  I read your post on your Officejet 8620 do not print for you, on your system Windows 8. I suggest you try the following steps.

  1. go to your control panel and uninstall your printer.
  2. hold your key to Windows and the R key on your keyboard to invite the run dialogue box.
  3. Type "coil" and press enter or click OK.
  4. Select and open the drivers folder, select the x 64 folder if you have a 64-bit operating system or the w32x86 if you have a 32-bit operating system.
  5 open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6 reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  I hope that helps!

  Have a nice day

• oficejet 6700 premium: HP Officejet 6700 Premium WIN 7 - double-sided print - back comes out backwards

  HP Officejet 6700 Premium - os Win 7 - double sided printing - back comes out backwards. I TRIED TO DOUBLE-SIDE PRINTING, BOOKLET PRINTING, AND PRINTING GREETING CARDS. ALL OUT UPSIDE DOWN AND ALSO very small PRINT ON ONE SIDE OF THE PAPER HALF. HOW TO SET THE PRINTER SETTINGS BY DEFAULT OR CHANGE WHAT IS PAST?   Oh it then, I'm not yelling, just noticed the hats were on.

  Jay B.

  Hi @Jayburn,

  Welcome to the HP Forums!

  I noticed that the back comes out on top down, when duplex printing with your HP Officejet 6700 Premium, Windows 7. I am pleased to see that for you!

  Please, take a look through this guide, print on both sides of the paper (duplex printing) for HP Officejet Premium 6700 e-all-in-one printer (H711). Follow the instructions for Windows.

  Guidelines General double-sided printing

  Do not print on both sides of the following types of paper, or paper jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load the paper with the top edge first and the side to be printed facing downwards.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• OfficeJet Pro 8610: Need a feature to print overview of 8600 Officejet series

  Our library network environment is a challenge. I would like to plug into our ethernet with a cat5e cable network and be a part of our network printer, but I have to be able to print wirelessly from two Windows laptops. Unfortunately, our wi - fi library through the network of the city that is otherwise not available to us. When I plug the cable of the respectable wireless ethernet becomes unavailable.

  For now, I am attaching the printer with a USB cable to a desktop computer and I got the printer shared with another office.  But how do I print wireless to the printer for computers laptops windows?  Is the printer must be connected to a wireless router to print wireless? And can I order wireless printing and always plug into an ethernet network? Because I prefer not having to share the computer to another computer on the network for printing.

  Hello

  I'm afraid that the connection of the printer for cable networks and wireless at the same time can be made, the printer can be connected to a unique network, once connected an Ethernet wireless capability cable does not connect to a wireless network.

  However, you may be able to use wireless Direct, which can be used same onnce the printer is connected to a LAN.

  For that, you'll need spend your PC from the network wireless network printer in order to print...

  To access the internet, you'll need for the PC back to your wireless router:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c04090221

  Hope that help, it is more you could have for these needs...

  Shlomi

• OfficeJet Pro 8620: Analysis of problems of printer to the computer using windows 10

  I just upgraded to Windows 10 and now I'm not able to scan from the printer to the computer. I can scan the other way IE. computer to scan but is not as convenient. I had no question before the upgrade. The error message I get is

  
  

  "The analysis could not be performed because of one or more of the following problems:

  -Connection to the computer is lost.

  -L' scanning on the computer application is currently in use.

  -Application OCR is not installed on the computer.

  See the computer for details screen'.

  First of all it is connected with a usb cable, so no logical reason why the connection is lost.

  Secondly it is not used because I am trying to use it

  Third, it has baffled me because there is no reason why the OCR application is now gone, he worked before windows 10.

  and finally there is no detail on the computer screen, why it tells me that I do not understand.

  Any help would be appreciated. Thank you.

  Hello again,

  Looks like the next option is to uninstall & reinstall the printer software. This will ensure that the scan to computer option is restored.

  Please find the link below to install the printing software.

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Note: Esnure that the chosen operating system is win10.

  If you are facing difficulties with the installation or uninstall, please contact HP technical support to the 1-800-474-6836.

  Kind regards

  Ashish

  　

  **************

  I work for HP, here is my point of view only.

• OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

  Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

  Hello dhe8011,

  Welcome to the HP Forums!

  I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

  Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

  Let me know if this document solved your problem or not.

  Impatience on your part.

• OfficeJet Pro 6830: MacBook Pro does not print wirelessly for Officejet Pro 6830

  I used to have an old HP Officejet 7210 who was once able to print wirelessly from my MacBook pro, but at some point, wasn't able to do wireless and had to print with usb connection.

  For Black Friday, we bought an Officejet Pro 6830 and on internet I downloaded the latest driver for my MacBook Pro and my windows laptop of wifes and our desktop PC. The mobile office and windows had no problem, but once more, I was not able to print wireless from the MacBook Pro. When I try to print wireless the printer dialogue indicates he's trying to deal with and then it says "the printer is currently in use". So I'll still have to plug the USB to print with this new printer is less than a month.

  I was able to print the wireless test page and he noted that the test page bypassed print drivers. In addition, I am able to go into the printer utilities and see how much ink, I have and the various settings of the printer but I just cannot print documents from applications wireless.

  Any help would be greatly appreciated

  Hello

  First of all, do not forget to reboot your router by unplugging its power for a while, then let it 2-3 minutes to reboot and restart the printer.

  Make sure that the printer is connected wireless and blue wire it light.

  Try now to go to System Preferences > print & scan and click on the sign more. you see the printer listed?

  May you had prior display the problem started with your previous printer? for example a new router, changes of settings, etc. ?