store Windows update folder

where windows store downloaded updates that we can save for future use.

Store the local Windows for the following facilities updates

http://WindowsXP.MVPs.org/saveupdates.htm

Tags: Windows

Similar Questions

  • Problem on windows update/folder

    Hello

    I cannot delete a folder that is named "c6f966da617249d9c13e6594a9b551". I think that this folder is created during the windows update and now it does not get away. When I try to remove this folder it says access denied. Please help me with this problem.

    Thank you in advance...

    Hello René.

    I suggest you try the following:
     
    close and exit all the open documents or windows program you have open.
     
     
    1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
     
    1B. make disappear/close the pop-up window "automated troubleshooting! -then...
     
    c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

    2. Restart & then run manually check the updates in Windows Update, etc, etc...
    When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
     
    If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
    Those that are marked as "optional" decline.
     
    Have infinite patience so that it scans and it's work.
     
    When you are prompted to restart Windows, please do. Allow it to restart.

    If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

    Note:  Running in aggressive mode of difficulty he 50202 will result in a loss history update but will not affect the actual installed updates.

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

    • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

    Resolution for the error Code:

    0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

     

    When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

    • 0x800A0046
    • 0 x 80248011
    • 0x80072EE7
    • 0x8024402C
    • 0x8024502d
    • 0x800A01AD

    CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

    • The 0x800A0046 error code may occur if one of the following conditions is true:

      • The logon user account belongs to the guests or limited account groups.
      • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
      • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
    • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
    • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
    • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
    • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.
     

    RESOLUTION

    0x800A0046 error code to resolve this error, use one of the following methods: me...

    0x800A0046 error code

    To resolve this error, use one of the following methods:

    Method 1: Remove the user account that is experiencing difficulties for customers or account groups

    1. Click Start and run, type control admintools, and then click OK.
    2. Click on computer management.
    3. Expand local users and groups.
    4. Select users.
    5. Open the account used to access Windows Update or Microsoft Update.
    6. Click on the Member tab of.
    7. Select the user account you want to remove, and then click on remove.

    Method 2: Set the security descriptor

    1. Click Start, run, type cmd, and then click OK.
    2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

      You will receive a message of 'Success'

      Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

    3. Type Exit to close the command prompt.
    4. Try Windows Update or Microsoft Update again.

    Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

    1. Click Start, click Run, type secpol.msc and press ENTER.
    2. Expand local policies.
    3. Click user rights assignment.
    4. Double-click to open the impersonate a client after authentication
    5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
    6. Click OK and restart the computer.

    Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

    1. Click Start and run, type services.msc, and then click OK.
    2. Find and right-click the remote procedure call (RPC) service and then click Properties.
    3. On the connection tab, click Local System account, click on apply and then click OK.
     

    error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

    1. In the Internet Explorer Tools menu, click Internet Options.
    2. On the general tab, click on delete files in the temporary Internet files section.
    3. Click OK, and then click OK again.

    To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

    1. Click Start, click Run type cmd in the Open box, and then click OK.
    2. At the command prompt, type the following command and press ENTER: net stop wuauserv
    3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

      Where c:\Windows is the folder where Windows is installed.

    4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
    5. At the command prompt, type the following command and press ENTER: net start wuauserv.
    6. Close the command prompt window.
     

    0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

    The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

    1. Right-click the Hosts file.
    2. Click Open with, and then select Notepad from the list of programs.

    If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

    Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

     

    error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Click the Connections tab, click LAN settings, and then advance.
    4. Delete any entry in the Exceptions section.
    5. Exit Internet Explorer.
    6. Click Start, run, type cmd, and then click OK.
    7. Type the following commands. Press ENTER after each command.
      • proxycfg d
      • net stop wuauserv
      • net start wuauserv

    0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

    Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

    LoadLibrary (".dll") has failed - the specified file name could not be found.

    You can ignore this error message and continue to the next step.

    1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
    2. When you receive the following message appears, click OK:
      DllRegisterServer in Msxml.dll successful.
    3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
    4. When you receive the following message appears, click OK:
      DllRegisterServer in Msxml2.dll successful.
    5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
    6. When you receive the following message appears, click OK:
      DllRegisterServer in Msxml3.dll successful.

    Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

    1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
    2. When you receive the following message appears, click OK:
      DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Error code: 0 x 80248011 - cannot display web page Windows Update

    When you try to use microsoft update after a few seconds of analysis of the updates, the update stops - can or view web page - and display an error message [error number: 0 x 80248011]

    Recommended action is to remove temporary internet files & restart internet explore.

    DONE, (3 times), but still the same result, a few seconds in the analysis stops update - cannot display web page [error number: 0 x 80248011]

    What's wrong???

    Thank you

    gfa5775

    GFA,

    Number of all other errors

    First of all to clear up your Temp File/Cache, restart the computer and try again. Better and easier to use - CCleaner.

    Reboot and reset the Windows Update components with the aggressive part of the correction

    How to reset the Windows Update components?  http://support.Microsoft.com/kb/971058

    Reset

    always disclose your OS versions and IE when you want to help.

    http://support.Microsoft.com/kb/555375

    What updates you trying to install?

    Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.

    May occur due to corruption in the Datatore folder or problems in the Internet cache

    This will give you a starting point for your troubleshooting anyway.

  • Windows update error 0 x 80248011 windows xp - have tried most of the solutions here

    Try to get updates for my HP running Windows XP Media Center addition version 2002 with Service Pack 3

    I recently put Norton Antivirus on my computer, none of the others are having this problem, but it's the single XP computer we have.

    Get this error when I try to use windows update: 0 x 80248011

    I ran FixIt tool and he says that he finds the problems and fixed them. It wasn't true, it always gives me the same exact error and can not get updates of window on my computer. That's what he said when I select the option to tell him what to the difficulty:

    Details of the update of Windows editor

    Problems found
    Components Windows Update must be repairedWindows of update components needs to be repaired
    One or more components of Windows Update are configured incorrectly detected
    Fix the Windows Update components not running
     
    Verified issues
    By default Windows Update data locations have Windows Update changedDefault data locations have changed
    The location where the Windows Update stores data has changed and must be repaired Checked

    Problems found details

    Update Windows 6 components must be repaired detected
     
    One or more components of Windows Update are configured incorrectly
    Fix the Windows Update components not running
     
    Repairing the Windows Update components frequently solves common Windows Update errors

    Issues checked the details of the detection

    6 Windows Update default data locations have changed Checked
     
    The location where Windows Update stores data has changed and needs to be repaired
    Fix the Windows Update default locations will not run
     
    Moved from Windows Update to the default settings of Windows

    Details of detection

    Collection information
    Computer name: ZACHCPU_XP
    Windows Version: 5.1
    Architecture: x 86
    Time: 01/05/2013-16:04:18

    Publisher details

    Windows Update
    Problems that prevent you from Windows Update.
    Package Version: 4.0.2.20110411
    Publisher: Microsoft Corporation

    Try to get updates for my HP running Windows XP Media Center addition version 2002 with Service Pack 3

    I recently put Norton Antivirus on my computer, none of the others are having this problem, but it's the single XP computer we have.

    Get this error when I try to use windows update: 0 x 80248011

    I ran FixIt tool and he says that he finds the problems and fixed them. It wasn't true, it always gives me the same exact error and can not get updates of window on my computer. That's what he said when I select the option to tell him what to the difficulty:

    Details of the update of Windows editor

    Problems found
    Components Windows Update must be repairedWindows of update components needs to be repaired
    One or more components of Windows Update are configured incorrectly detected
    Fix the Windows Update components not running
     
    Verified issues
    By default Windows Update data locations have Windows Update changedDefault data locations have changed
    The location where the Windows Update stores data has changed and must be repaired Checked

    Problems found details

    Update Windows 6 components must be repaired detected
     
    One or more components of Windows Update are configured incorrectly
    Fix the Windows Update components not running
     
    Repairing the Windows Update components frequently solves common Windows Update errors

    Issues checked the details of the detection

    6 Windows Update default data locations have changed Checked
     
    The location where Windows Update stores data has changed and needs to be repaired
    Fix the Windows Update default locations will not run
     
    Moved from Windows Update to the default settings of Windows

    Details of detection

    Collection information
    Computer name: ZACHCPU_XP
    Windows Version: 5.1
    Architecture: x 86
    Time: 01/05/2013-16:04:18

    Publisher details

    Windows Update
    Problems that prevent you from Windows Update.
    Package Version: 4.0.2.20110411
    Publisher: Microsoft Corporation

    clear the cache of Internet Explorer. To do this, follow these steps:

    1. In the Internet Explorer Tools menu, click Internet Options.
    2. On the general tab, click delete files in the Temporary Internet files section.
    3. Click OK, and then click OK again.

    To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

    1. Click Start, click run type cmd in the Open box, and then click OK.
    2. At the command prompt, type the following command and press ENTER: net stop wuauserv
    3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows \SoftwareDistribution

      Where c:\Windows is the folder where Windows is installed.

    4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
    5. At the command prompt, type the following command and press ENTER: net start wuauserv.
    6. Close the command prompt window.

  • Windows Update error code 0 x 80248001

    I have a laptop Dell 6800 XP.

    I get the above error when you try to use the Microsoft Update feature.

    I also Symantic Antivirus installed.

    I tried all the recommended solutions on Microsoft, including "Fix - It" but still not able to get the updates.  It is a new problem.

    Thanks in advance for your help.

    Allen

    Hi, Aawall,

    You can scroll down to Mr. Fixit (first one) or do it yourself by following the directions below

    You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site

    http://support.Microsoft.com/kb/883821

    Before you troubleshoot this problem, disable the cache of Internet Explorer. To do this, follow these steps:

    1. In the Internet Explorer Tools menu, click Internet Options.
    2. On the general tab, click delete files in the Temporary Internet files section.
    3. Click OK, and then click OK again.

    To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

    1. Click Start, click run type cmd in the Open box, and then click OK.
    2. At the command prompt, type the following command and press ENTER: net stop wuauserv
    3. At the command prompt, type the following command and press ENTER: cd /d \SoftwareDistribution

      Where is the folder where Windows is installed.

    4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
    5. At the command prompt, type the following command and press ENTER: net start wuauserv.
    6. Close the command prompt window.

  • I want to stop pop up auto restart after windows updated.

    I saw the direction for users of XP Home going to 'HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU', but my PC does not have the do not have the "WindowsUpdate\AU", what should I do?

    Hi, Chris,.

    Backup Windows registry before you start:

    http://WindowsXP.MVPs.org/registry.htm

    How to create the key-

    Open Notepad

    Copy and paste the following text in Notepad:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
    "DetectionFrequency" = DWORD: 00000001
    "DetectionFrequencyEnabled" = DWORD: 00000001
    "NoAutoRebootWithLoggedOnUsers" = DWORD: 00000000

    Click file > save as

    Name: update.reg

    Save to the desktop

    Open the desktop and right click on the saved file to be merged into the registry.

    Support Microsoft - Michel - moderator,

    http://www.techsupportforum.com/forums/F217/missing-Windows-Update-folder-in-registry-359612.html

  • Impossible to update app from Microsoft Store Windows 8 - error 0 x 80246007 and error 0x8001074a

    Hello community

    I can´t updated app, store, I have try all the solutions in this net.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/unable-to-update-apps-error-some-thing-happened/494adef1-93C2-4D22-A963-61d050c79536

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/unable-to-install-Microsoft-apps-from-the-store/3646c352-9e0f-4DBA-b1cd-6ef3baaecf61

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/error-code-80073cf6/072950ed-8768-4517-BD85-553fd56abd67

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Windows-8-Pro-apps-update-error-message/33c90b48-6ABE-4C91-8244-58f4b9bf8a08

    and still the same error 80246007 x 0 and 0x8001074a error

    I need help please, because windows 8.1 is coming and I want to update

    also I try to communicate directly with Microsoft, and when asked for the PID (ID), I insert and always gives me a server error or other problems

    I need help please. Thanks in advance

    I ran into the problem last night where I could not install, reinstall, or update all apps in the Windows store.  I'm still under Windows 8 and 8.1 not for reasons known but that is for another place.
    This problem took me a day to find and troubleshoot, ALLL and I mean about 8 solid hours.  The error codes I received kept windows pointing store of problems with Windows Update or other corruptions of system, but after all of these solutions and executed the partner checks several times nothing was wrong with my Windows Update.  I would have guessed considering how I could still download updates from MS very well.
    What solved MY problem (and I bet that most of your establishments), was actually a file permissions issue.  There are TWO, count them 2 folders that you should be sure your username has full permissions.  I saw there of the patches that speak on one or the other, but you need BOTH.  Here is the path to these files file: (remember 'C' is my root drive, is the name of each user on the system, and if you have customized your installation of windows, or the location of the user folder, you must change this path to match)
    C:\Program Files\WindowsApps
    \AppData\Local\Packages C:\Users\
    Before you follow this procedure, access the Windows store and cancel all pending installations (or omitted).
    To set the permissions: (if at any time, the system asks the permission of the administrator, you must grant it)
    1. make sure that you logged in with an administrator account.
    2. open Windows Explorer and navigate to C:\Program FIles.
    3. Locate the file WindowsApps (all the way down)
    NOTE: this is a hidden folder, so do not forget, you go to the top of the window and click on the 'View' tab, then check the box next to "Hidden items" in the Show/Hide section.
    4. right click on the WindowsApps file and choose "Properties".
    5. click on the security"" tab.
    6. click on the button "Advanced".
    7.1 if your username is listed in the list under entity double-click on it (otherwise go to 7.2)
    7.1 a - ensure the Type: is 'Allow' and the applies to: is "this folder, subfolders and files.
    7.1 b - click the full control checkbox
    7.1.c - click OK
    7.2 If your username is not listed, click on the button "Add" below the list (you may need to click on 'Edit' to the 'Add' button to appear)
    7.2 a - click on "Select a main" link at the top.
    7.2 b-"Advanced", click on "find now".
    7.2 c - book here your user name in the list and double-click on it
    7.2d - click OK
    7.2E - ensure the Type: is 'Allow' and the applies to: is "this folder, subfolders and files.
    7.2f - click the full control checkbox
    7.2.g - click OK
    8. you should now see your username in the list of the "Advanced Security Settings for WindowsApps" with "Full control" in the access column (if you do not, go back to 7.1 or 7.2 and carefully follow the steps once again).  Click OK
    9 go to C:\Users\\AppData\Local
    NOTE: AppData is a hidden folder, so be sure you have the "Hidden items" box checked
    10. right click on the WindowsApps file and choose "Properties".
    11. click on the security"" tab.
    12. click on the button "Advanced".
    13 follow the same procedure in steps 7.1 or 7.2 to add your username to the list to this folder with full control permissions.
    14
    . Restart your computer.
    That's it, once your computer restarts, you should be able to use the store Windows to install applications and updates.
    Once you confirm that it works for you, I recommend you to create an image of the master volume of your Windows System.  All this happened to me while I was trying to get everything set up initially, but once you do, using the image as a good quick a good known Configuration reboot is a MUCH faster way to solve many problems with Windows... SAME A WAY TO GO BACK to Windows 8 Windows 8.1 IF YOU FIND THE NEED. I KNOW I DID!
    Hope that helps everyone!

  • Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

    We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

    Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

    Nothing has changed for folders or shares. Actions are like:

    \\fs01\scans\IT

    Shared folder is \\fs01\scans

    Share permissions are full for everyone

    On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

    When I turn off the firewall of Windows on the FS01, it works.

    Can I get a SMB = OK on the Multi functional.

    When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

    I checked the rules and everthing about file and printer sharing is allowed...

    Can someone please think about what to do?
    Because really don't want to go with Windows Firewall disabled.

    The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

    Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

    Hello

    "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

    Microsoft has specific Forums to help you with your Server 2008 R2 questions.

    Could you please repost this link in Server 2008 R2 Forums.

    "Support for Windows Server 2008 R2"

    http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

    See you soon.

  • Update XP 32-bit to 64-bit Windows 8 - keep this Windows.old folder?

    On this Web page , which is titled "Upgrading to Windows 8.1 of Windows Vista or Windows XP", he States the following:

    BEGINNING

    "Note".

    • You can always restore your personal files after that you upgraded to Windows 8.1. Your files are stored in the Windows.old folder, where you can retrieve them after the upgrade. For more information, see recover files from the Windows.old folder. »

    END

    However the foregoing relates to the upgrade from XP 32 bit to 32 bit of windows 8. My question is, is this Windows.old folder that is preserved when you upgrade XP 32 bit to 8 64-bitwindows?

    I have a lot of shortcut links to files and folders, etc. These shortcut links are stored in the Windows.old folder, or I will have to be reprinted, tell them that I have probably 100's and it would be so a real problem.

    Hello

    Do the following before upgrade you to Windows 8/8.1.

    Check if the manufacturer of your computer/laptop has Windows 8/8.1 drivers available for your model.

    If this is not available, Windows 8/8.1 not install and work properly for you.

    There is a lot of information in this first link from Microsoft:

    Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

    :

    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

    "8.1 for Windows system requirements.

    http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

    See you soon.

  • When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

    When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

    I'm not that computer literate and do not understand what needs to be fixed.

    This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

    I use ESET Antivirus Node32 software.

    Hello

    1. What is the error message or an exact error code?

    2 have you made changes on the computer before this problem?

    3. you try to check the updates?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Reset Windows Update components and then try to download the updates.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

     

    Method 2:

    File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

    http://support.Microsoft.com/kb/310747

    Please respond with more information so that we could help you more.

  • Malicious Software Removal Tool repeatedly offered on Windows update. Manual update of the malicious software removal tool Windows sends the file to a different folder every time I install and is inaccessible

    Original title: manual update of Windows malicious software removal tool sends file in a different folder every time I install and is inaccessible

    I installed MRT repeatedly automatically and it keeps asking me to install.  I did it manually and it would be installed in a different folder on my other drive to a different location each time.  Here are two of them only starting today.                e:\be6123f9a9f687a86b13dca0939d0bc and e:\7321902026cdc0af0d9d93be

    Hello

    The following article can help you to solve this problem.
    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
    http://support.Microsoft.com/kb/910339

  • Error code: 0xC004E002, the software licensing service reported that the license store contains data of the unstable after installing Windows updates.

    Original title: I installed a windows update and all of a sudden I can't connect to my computer using my password it says error data is unstable with microsoft

    It says the software licensing service reported that the license store contains inconsistent data.      I have a windows vista hp pavillian

    Code 0xC004E002

    Hi JillCollas,

    When you are in the display of error message you will get a support contact option once you click on it, it should open up Internet explorer. If you are able to open IE page, then follow the steps and see if it helps.

    a. Click Start and type cmd in the search box.

    b. right click on cmd and then click Run as administrator.

    c. at the command prompt, type the following commands and press ENTER:

    Type: net stop slsvc (it may ask you if you're sure, select Yes)

    Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

    Type: Rename tokens.bar tokens.dat

    Type: cd %windir%\system32

    Type: net start slsvc

    Type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

    Reboot twice

    You may enter the product again key, and then activate.

    For more information, you can consult the following articles:

    Error 0xC004E002 during activation of Windows Vista and Windows Server 2008

    Activating Windows: Frequently asked questions

    Hope this information is useful.

  • I need to change the folder where download windows updates, I know there must be a way to do this.

    Could someone help me on this issue.

    I need to change the folder where download windows updates, I know there must be a way to do this.

    Updates Windows installation location cannot be changed. Windows updates tend to fix and replace the old files of the system, so it would normally replace a file in the System32 folder.

    If you want to free up disk space, see the following:

  • A new folder is created in the Office whenever we store Windows?

    A new folder is created in the Office whenever we store Windows. When we try to delete by connect you as an admin as we get the same problem. When we try to delete the file it says access denied and we are not able to create a new folder in the office. Please help on this issue.

    A new folder is created in the Office whenever we store Windows. When we try to delete by connect you as an admin as we get the same problem. When we try to delete the file it says access denied and we are not able to create a new folder in the office. Please help on this issue.

    All this and never a mention of the name of the folder.  :-)
     
    Also - have you tried a system restore to a time before the record began to appear?
     
    What was right installed or changed before that creating folder thing began to happen?

Maybe you are looking for