Storm Smartphones blackBerry all of a sudden cannot communicate with a MicroSD card? Help

Similar Questions

• Lexmark X 2600 all-in-one printer cannot communicate with computer

  I'm running a xps dell system with windows edition 32-bit home premium. All of a sudden my printer lexmark x 2600 stop scanning so I uninstalled and reinstalled. Now not only the scanner does not work, but I can't print documents. I uninstalled and reinstalled the printer several times. I also searched drivers more recent lexmarks site and looked for patches and fixes from microsofts Web site. I get the same message 'printer cannont communicate with the computer.' I tried all the solutions that come up with the error message and all have failed. I posted on the Windows 7 forum by chance and gave some ideas to try like the blocking of service lxdncatscustconnect. After doing this, I was able to print once, but then he returned to bein a pain in the A *. I've lost track since I was last able to use my printer and any help to solve this problem would be highly appreciated.

  Also, I am running avast antivirus v 5.o.594 and spin sybot D1 & s. 6.2.46 with the residential Tea-timer off. I don't know if this will help, but any help would be greatly appreciated.

  Hi Firestorm29xt,
   
  1. don't you make changes before the show?
   
  Try these steps and check the result.
  Step 1: Uninstall spybot and check the result
   
  Note: Don't forget to reinstall the software after testing the result.
  
  Step 2: Run the Microsoft printer Troubleshooter to diagnose the problem
  a see the problems of printing and printing errors
  b. click the "Run now" to run the tool and follow the instructions in the wizard successfully.
  c. restart the computer and see if you can print successfully.
   
  Step 3: If the problem persists, follow the steps mentioned in this article:Communication not available
   
  For additional support, please contact Lexmark technical support team.
  
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Z10 Z10 suddenly stopped synchronization of calendar and contact - link gives BB cannot communicate with connected mssg but displays device

  I think that BB link updated the software in March 2015.  I had been very good sync with my laptop Windows 8 with the Outlook calendar and contacts, but this week it stopped.  BB link watch Z0 connected, but says cannot communicate with the device.  I tried the solution of knowledge base - leave plugged phone with a USB cable, power phone off, then back on donkey wait 3-5 minutes for the pilots to complete loading - but none help.  I rebooted the computer and the Z10 several times, but no luck with the synchronization.  Any help is appreciated!

  Try the following steps, which will completely remove all traces of BlackBerry-link device driver entries and may solve your problem:

  1. Uninstall the BlackBerry link.
  2. Open the Device Manager by pressing the Windows key + R on your keyboard type devmgmt.msc , and then click OK.
  3. Click view , and then click Show hidden devices on the menu that appears.
  4. Expand the BlackBerry section by clicking on the + symbol next to it.
  5. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
     • BlackBerry smartphone
     • BlackBerry smart phone
  6. Expand the network adapters section by clicking on the + symbol next to it.
  7. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
     • BlackBerry smartphone
     • Tethering BlackBerry smartphone
     • Virtual private network of blackBerry
  8. Restart the computer.
  9. Reinstall the latest version of BlackBerry link.
  10. Try to reconnect your BlackBerry Z10 to the computer and see if she is able to communicate with the BlackBerry link.

  After back and let us know if it works for you.

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• Host cannot communicate with all other nodes in the cluster virtual SAN allowed

  I get this error after you apply the latest patch:- http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2135115

  So all the hosts are now review: VMware ESXi, 6.0.0 3380124

  After the reboot, I get the error message on the host cannot communicate with all other nodes in the cluster active virtual san...

  However, the VSAN health check is green, 'get esxcli vsan cluster' shows all 6 members of the cluster ok... and if I reboot a crowd happens ok without the error... so if I reboot another host, it will come without the error... but then the host on which I rebooted before it displayed the error...?  So I can't ever get more than 1 host without the error after a reboot.

  I checked multicast that removes ok, in fact all of the checks in contradiction with the fact that why I get this error...

  Someone at - it ideas? Could this be the latest patch...

  Paul...

  Hello, this has been repeated here: 6.0 U1b - hosts cannot communicate thanks, Zach.

• Error "host cannot communicate with all other nodes in the cluster of enabeld VSAN.

  Hello community,

  We have a problem (?).

  We have a cluster VSAN enabled with four hosts. Everything seems perfect,

  -the configuration is good,

  -Displays the page state VSAN "network status: (green arrow) Normal."

  -Displays the disk management page "status: healthy" for all of our groups of disks.

  -Same 'esxcli vsan cluster get"on each host returns a 'HEALTHY '.

  But we have a yellow exclamation littly on each host 'host cannot communicate with all other nodes in the cluster of enabeld VSAN.

  Anyone with the same problem? Anyone with an idea or a hint?

  Thank you!

  Update vcenter to the latest version and the error disappears. Problem solved! The 'old' version of vcenter performed since September 2014, strange.

  Thank you very much for your help!

• computer cannot communicate with over 8600

  My 8600 Officejet Plus works fine on a wireless network for about a year, but after restarting the computer yesterday morning, I get the message "...". cannot communicate with the printer.  I tried all the suggestions below without result.  I can access page ews from the printer to the computer and I get my apps on the internet every night. I have Ran the network to the printer and all past test.  The Network Setup page shows the printer is connected and ready for the correct ip address.  I ran the HP print and scan doctor and you can see that everything works.  I also ran the troubleshooter in Windows and it showed no problem with 'the printer is ready.  I unplugged the router, printer and restarted Windows.  I removed the printer via the "devices and printers" window, as well as the HP software.  I reinstalled the software, connected the printer and run the wireless configuration.  I've updated the ip address on windows.  All to nothing does not.  Any help would be appreciated.

  Running Windows 7 Home Premium

  Belkin N router is

  In fact, I found the problem.  It seems to run a malicious program to the startup disable Norton anti-virus and changed several keys in the registry that prohibits the computer to communicate as well as Outlook unauthorized access to my POP3 account and who knows what.  I managed to uninstall Norton, then re - install a newer version.  This enabled Norton run a quick scan before restarting.  After re-booting, Norton has been disabled again.  I used Norton Erase to analyze and repair the registry that solved the problem.  Immediately after re-boot after the last scan and fix the network Windows Test Page that announces the printer has been installed on persistent organic pollutants.

  Thanks for you quick response, however.  I suspect a virus when I tried, without success, to open Norton in order to disable the firewall and couldn't.

• SE error message saying the printer cannot communicate with the computer cause of blocked files.

  Original title: DRIVER of PRINTER BLOCKED

  A COMMS. ERROR MESSAGE ME SAYING THAT MY PRINTER CANNOT COMMUNICATE WITH MY PC. AFTER COMPLETING THE USUAL HARDWARE CHECKS THAT I USED THE SERVICE CENTER OF DELL ONLINE THAT REMOVAL OF TWO STATES ' DLEACOMS. EXE' AND ' DLEAWBGW. EXE ' MUST BE RELEASED TO ALLOW MY PRINTER TO WORK.

  I SEE NO REFERENCE TO THESE FILES IN THE WINDOWS FIREWALL AND TO THIS DAY THE ONLY WAY AROUND THIS PROBLEM IS TO REMOVE THE PRINTER AND REINSTALL, BUT IT WORKS FOR A SHORT PERIOD. I USED (BY REMOTE CONTROL) THE STATION OF SOLUTION DELL THREE TIMES BUT EVEN THEY EVENTUALLY REMOVE ALL AND REINSTALL THE PRINTER.

  SOMEONE HAS AN IDEA HOW THESE FILES CAN BE UNLOCKED?

  I suggest to disable CAPS LOCK key since your message is all in the capital and difficult to read. Have you tried to add to the exception in the Windows Firewall? Try also to change your network connection for work or at home instead of public. Also make sure you installed the latest version of the driver and are compatible. Also try to run the tool:

  http://support.Microsoft.com/mats/printing_problems/

  If the problem is not resolved, contact Dell customer service.

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• The Dell printer cannot communicate with the Dell computer.

  It seems that suddenly my Dell AIO 942 printer cannot communicate with my Dell Studio 17computer.  These devices have been the transparent connection until two days ago.  I've set up a restore point, I installed the drivers, unplugged and re plugged 110 s and USBs, used different ports and I still have the same, printer cannot communicate with the State of the computer.   Copy and scan functions are good, Windows Vista operating systems.  How can I find these devices to their previous state of communication?

  Jesse,

  Thank you very much for the detailed information. It really give us a head start trying to solve the problem.

  Please answer these questions to get more clarity-

  (1) what are the other steps in troubleshooting tried by you so far?

  (2) other changes on the computer that I should know about?

  In the meantime, I have you refer to items offered on the Dell website - troubleshooting

  http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-942/research

  You can also have a look at the Microsoft article as well-

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Get back to us with the results.

• HELP: What router supports VLAN? -I wish both groups cannot communicate with each other.

  Hi all

  I have 5 wireless devices must connect to the router.

  I want to divide it into 2 groups:

  That is to say, 1, device A, B, C, group 2, device D, E.

  I would like two groups cannot communicate with each other.

  I've heard, it can be done by VLAN, is e2500 can adapt to what I need?

  What about EA3500 and EA4500?

  I use G wireless, is what it means that ea4500 is out of choice even if it supports VLAN?

  Thank you all!

  Evil

  Thanks for the clarification for the OP

  FWIW

  is this an alternative to routers that do not support of VLAN, to do what you want

  http://www.SmallNetBuilder.com/lanwan/lanwan-HOWTO/32486-how-to-segment-a-small-LAN-using-tagged-VLA...

• Windows cannot communicate with primary dns server

  Hey everybody.  I have a home network, wired PC, 1 wifi 1.  WiFi works fine.  wired network printers work well, other computers (laptops work fine both wired and wireless.)  I have a PC (VISTA), which now gives me the "windows cannot communicate with primary dns server.  This has happened a couple of times, but a reboot fixed things.  Once I had to change primary dns server from automatic to 208.67.222.222 (who got to this site), it worked.  Now, the same error, but nothing works.  I have tried in both directions between the DNS auto numbers listed here, also, have tried the following:

  ipconfig/flushdns
  ipconfig/registerdns
  netsh interface ip reset reset.log
  netsh int ip reset resetlog.txt

  and had windows try to reset the DNS of countless times.  Nothing works.  The upgrade to W7 eventually will correct this problem?  Another question, my wife insists on the use of AOL software (I know, I know), even if all that she uses to is by e-mail.  She says she loves interface.  A chance that caused this problem?

  Hello

  1. have there been recent changes to the system before the show?

  2. the problem occurs only with specific applications?

  Method 1:

  Follow the link and follow the steps proposed by Shekhar S and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-communicate-with-primary-DNS-server/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

  Method 2:

  Follow the link below and follow the steps. Check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  I also suggest you to run the command in the command prompt and check where the Windows Vista computer is pointing to DNS and DHCP.

  ipconfig/all

  Post back with the results in this thread.

  Let us know if it helps.

• Canon PIXMA MP160 error message 'cannot communicate with scanner.

  I have a Canon PIXMA MP160, who worked during the scanning of the printer on my computer. Now, I get an error message "cannot communicate with scanner. Installation scanner no longer works. The Canon site suggested looking in the Windows directory for a file named ' USBSCAN. SYS, but my research has not found it

  Installation scanner said that all the files are in place until it reaches the end.

  I received an update of windows on 31/10/2011. It works

• cannot communicate with primary DNS (68.105.28.11) Server

  I don't have any wireless internet access. When I hit the button diagnosis: "Cannot communicate with primary DNS (68.105.28.11) server." appears

  My IP config:
  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Users\carmen>ipconfig/all

  Windows IP configuration

  Name of the host...: carmen-PC

  Primary Dns suffix...:

  Type of node...: peer-to-peer

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: dc.dc.cox.net

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : dc.dc.cox.net

  ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-1F-E1-79-03-4C

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::34b7:70ad:e7c0:14f6% 11 (Preferred)

  IPv4 address...: 192.168.1.116 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, July 17, 2011 10:02:20

  End of the lease...: Monday, July 18, 2011 10:02:20

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 352329697

  DHCPv6 DUID customer...: 00-01-00-01-0F-E5-04-EE-00-1E-EC-75-99-F2

  DNS servers...: 68.105.28.11

  68.105.29.11

  68.105.28.12

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : dc.dc.cox.net

  Description...: Realtek RTL8139/810 x Family Fast Ethernet

  NIC

  Physical address.... : 00-1E-EC-75-99-F2

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::59a7:b3b:4c00:4663% 10 (Preferred)

  IPv4 address...: 192.168.1.119 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Saturday, July 16, 2011 13:46:25

  End of the lease...: Monday, July 18, 2011 10:03:15

  ... Default gateway. : fe80::34b7:70ad:e7c0:14f6 10%

  192.168.1.1

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 251665208

  DHCPv6 DUID customer...: 00-01-00-01-0F-E5-04-EE-00-1E-EC-75-99-F2

  DNS servers...: 68.105.28.11

  68.105.29.11

  68.105.28.12

  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  Active DHCP...
  . : No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 17:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 13:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : dc.dc.cox.net
  Description...: isatap.dc.dc.cox.net
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 14:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: isatap.residents.gmu.edu
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...
  . : Yes
  Card tunnel Local Area Connection * 15:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. NAT - wireless.gmu.edu
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 16:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. NAT - wireless.gmu.edu
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 18:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 20:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  C:\Users\carmen >
  Help, please.  I've been using an Ethernet cable, but it is so EMBARRASSING!

  Hi CarmenZL,

  1. did you last changes made on your computer before the show?

  Follow the following troubleshooting methods:

  Method: 1

  I suggest you to rest TCP/IP and check its operation.

  To reset TCP/IP stack to go to this article and follow the instructions.

  How to reset the Protocol Internet (TCP/IP)

  Method: 2

  Also, follow these steps.

  Step: 1

  a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.

  b. make sure you are in Setup-> basic configuration category.

  c. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.

  d. enable DHCP if you want, you can change the number that starts the DHCP IP assigning. (This is optional)

  e. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.

  f. scroll down and click 'Save Settings'.

  Step: 2

  a. click on start and then Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. Select obtain DNS server automatically an address and press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  Method: 3

  Also perform the following troubleshooting steps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  On a Windows Vista client computer, you can get an IP address or options from the DHCP server