Strange behavior of bounding box

Similar Questions

• foreign key 'generate' strange behavior check box, any idea?

  Summary: in the properties of the table, the foreign keys, the box generate behaves badly, and I don't understand why or how I got there.

  Oracle Data Modeler 4.0.2.840 8.1 X 64 Windows, jdk1.7.0_55

  the behavior is:

  (1) add the foreign key (two different more to see strange behavior)

  (2) uncheck 'generate' on a foreign key

  (3) apply, Ok

  (4) ask 'Preview DDL', a foreign key constraint is generated, SO FAR SO GOOD, I'm happy

  5-now click on the button 'generate the DDL' for any design = > * * TWO foreign keys are generated?

  (6) even more strange: sometimes the 'generate' check itself after step 5, most of the time is not

  (7) at the beginning this has occurred for a couple of foreign key 'uncheckees', now it almost always happens.

  The relational model was built by importing the SQL scripts already exist (try to migrate the Data Modeler). No too complex ~ 115 tables, 12 times.

  I think it's a bug, but I can't find any reference on the web, maybe I do something wrong?

  Hi Michel,.

  The generation is different depending on whether or not the relevant storage design is open.

  If the design of the storage is not open, the option "Generate DDL" on the foreign key is taken into account (for an overview of the DDL or full generation of DDL).  For an entire generation of DDL, the foreign key will initially not selected phase in the generation of the DDL if Options the option "Generate DDL" on the foreign key has been disabled.  (This change in the phase of the generation of DDL Options will also cause the option "Generate DDL" on the foreign key update.)

  If the design of the storage is open, the option 'generate DDL"on the foreign key has no effect (in a Preview of DDL or full DDL generation).

  Also in a generation full of DDL, an object will be initially marked as not selected if it has been disabled in the previous generation of DDL.

  I hope that this helps to explain the behavior that you find.

  David

• Bar chart stacked - strange behavior on display null values

  Hi all

  I'm trying to graph a county of the end dates of the activities over several years by months grouped by project.

  The problem I have is that there is a gap of 3 months where none of the activities that I am tracking complete. The default value for the stacked bar chart is to ignore the columns with no data (in my case it October-December 2015).

  To view these any given month I went to properties graphic and ticked the box "Include Null values. At this point, I get a very strange behavior. Once this option is selected, the legend explodes, showing each project in the database regardless if it meets my criteria for analysis.

  Has anyone another considering that happen? I'm doing something wrong?

  If it's important I'm in the OBI 11.1.1.7.150120

  Thank you for your help,

  Kevin Wolfe

  
  

  Hello

  You have a filter on the list of projects you want to see?

  Based on the way you describe your analysis I guess you don't have any what filter on the list of projects, but some of the filters on the other dimensions/attributes and these filters were limiting the list of projects.

  If this is the case then what you see is not a weird behavior, but everything you've asked your analysis.

  "Include null values" is not limited to the time dimension, it fits any dimension of your analysis, so no filter on projects = all projects.

• When the bounding box and driveways handles?

  Today, I had updated Illustrator 2014 a.1 and I realized that the bounding box disappeared...

  It works great when two or more objects are selected, but for a single object it just disappeared...

  How do I get it back?

  Vectorminator,

  If this applies to the Rectangles Live, you may need to wait for a fix, but you can create normal old shaped rectangles and have the normal behavior of return; You can use the free script created by Pawel, see this thread:

  https://forums.Adobe.com/thread/1587587

  It may be a good option to have in any case.

• Strange behavior with the paths of the image

  All, morning

  I have a strange behavior going on with my image paths and I was wondering if someone might be able to identify what they think happens?

  On the relative paths of my model (.. / Images/example.jpg) work very well.

  However, on the pages of the child the same relative paths do not display images and so I had to remove the '... /' to get to work (ending up with Images/example.jpg).

  This is obviously not desirable that I'm going to manually tweak the child pages where the content of the combo box was copied directly from the model that works very well.

  Any ideas what might be up?

  Thanks in advance

  You have not yet entered the main directive of models, which is that only changes to the unchangeable in the model regions will be applied to the child pages.  If this were not true, then we could never put unique content on a child page!

  So - the diagram is as follows:

  1 create a template and save it.

  2. the model of a page child spawn.  The child page will be a 'identical' model copy.

  3. Add a unique content to the page of the child.  The child page is now more a copy of 'identical' of the model.

  4 change something in the part NOT MODIFIABLE from the model and save it - all child pages receive the change.

  5 change something in the EDITABLE model part and save it - no child pages do not receive the change.

  6 spawn a NEW page of the model, and it's still a copy of 'identical' AGAIN CHANGED model.

  See how it works?

• Strange behavior of PE10 do not ask for disks 2 and 3.

  My computer complies with the system requirements and I have a brand new PE10 "closed". The box has three discs. I installed disc1 and serial number and told me not to install the other two disks. Installation was surprisingly closed. There is a shortcut on the desktop PE10 and PE10 is located in the Program Files folder. I can open PE10 with the shortcut on the desktop and everything seems to be there.

  I felt very uncomfortable so I uninstalled disc1 and reinstalled with the same results. I used PE4 for many years, so I'm used to Adobe Photoshop Elements. I have dozens of files in MY PICTURES, I want to implement PE10 but I didn't in case something is wrong.

  Can someone explain why, I was told not to install dics 2 and 3?  Are they necessary?

  cogleylane

  From: 99jon

  Sent: Thursday, April 12, 2012 14:23

  To: cogleylane

  Re: Strange behavior of PE10 asking only not for disks 2 and 3.

  Re: Strange behavior of PE10 asking only not for disks 2 and 3.

  created by 99jon in Photoshop Elements - discover complete discussion

• Strange behavior of the Animation

  Hello guys.

  I'm fading in the textArea 3 and 3 labels State 'default' to 'addRecommend' and fade out the text box and labels seeOther State to addREcommend. The defautl-> addRecommend works very well. However, addRecommend-> seeOther

  show "a text box" (which is not included in State seeOther) and kill my "add to database button" (which is in a State of seeOther).

  If I delete detailText and details of my transition melted, everything will work, but I need to have my detailText and fade out too much in detail. If I do not explain my question, please copy my code and paste it into your flex. I spent 5 hours to debug it but no luck. I have really really grateful if someone could help me.

  < fx:Script >

  <! [CDATA]

  protected function add_clickHandler(event:MouseEvent):void

  {

  currentState = "addRecommend";

  / / addRecommendMove.play ();

  }

  protected function seeOther_clickHandler(event:MouseEvent):void

  {

  currentState = "seeOther."

  }

  ]]>

  < / fx:Script >

  < s: states >

  < name s: State = "default" / >

  < s: State name = "addRecommend" / >

  < s: State name = "seeOther" / >

  < / s: states >

  < s:transitions >

  < s:Transition toState = "addRecommend" >

  < s:Sequence >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Resize target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < s:Parallel >

  < s:AddAction target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < s:Transition toState = "seeOther" >

  < s:Sequence >

  < s:Parallel >

  < s: bland target = "{[yourname, username, recommendCityLabel, recommendCity, detailText, detail]}" / >

  <!-if delete detailText and detail, the transition fade will be fine... but I need them to fade our and bland in...-->

  < / s:Parallel >

  < s:Parallel >

  < s:Move target = "{add}" / >

  < s:Move target = "{seeOthers}" / >

  < / s:Parallel >

  < / s:Sequence >

  < / s:Transition >

  < / s:transitions >

  < s:Label color = "#000000".

  x="10"

  y="60"

  ID = "YourName".

  fontSize = "13".

  fontFamily = 'arial '.

  text = "Your name" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "75" width = "50%" paddingLeft = "10" id = "userName" includeIn = "addRecommend" / >

  < s:Label color = "#000000".

  y="110"

  x="10"

  fontSize = "13".

  fontFamily = 'arial '.

  ID = "recommendCityLabel".

  text = "Recommended City" includeIn = "addRecommend" / >

  < s:TextInput x = "10" y = "125" id = "recommendCity" width = "85%" includeIn = "addRecommend" / >

  < s:Label color = "#000000" x = "10" y = "155".

  fontSize = "13".

  ID = "detailText" <!-if I add this label to my transition melted, the strange behavior->

  text = "you can add details!

  fontFamily = 'arial '.

  includeIn = "addRecommend" / >

  < s:TextArea = "180".

  x = "10".

  paddingLeft = "10".

  ID = "detail" <! - if I add this textArea for my transition melted, the strange behavior too - >

  Width = "90%" height = "160" includeIn = "addRecommend" / >

  < s:Button id = 'Add '.

  x="10"

  y="60"

  y.addRecommend = "350"

  width = "210".

  width.addRecommend = "150"

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "recommend your favorite places.

  label = "add your recommendation."

  label.addRecommend = "Add to database"

  Click = "add_clickHandler (Event)" "

  />

  < s:Button id = "seeOthers".

  y="105"

  x="10"

  y.addRecommend = "400"

  width = "220".

  height = "35".

  fontWeight = "bold".

  fontSize = "12".

  fontFamily = 'arial '.

  toolTip = "see recommendation of others.

  label = "see other recommendations.

  Click = "seeOther_clickHandler (event)" / >

  Hello

  I had a look at these, I think that the provision itself was a bit wonky, I enclose the code in a link like this forum tends to eat code that doesn't help when you're trying to look at the code.

  http://gumbo.flashhub.NET/Jerry/ source included
  You have the basics of work, but to avoid confusion in the States and the code, I suggest you try to group your objects to display relevant to the effects of transition, it is easier to control and maintain.
  On a side note use you designview in the ide to see how States will look, this tool will be of great help while you learn, ignore anyone who tells you not to use designview, it is a page layout tool and works well for these types of tasks.
  David.

• HELP - strange behavior rounded Rectangle - cannot select Anchor Points

  Good day to you all, I hope someone can help out me.

  I have a strange problem with my Illustrator CS3.

  I worked on an illustration for hours without any problem and the graphics requires me to do a lot of "buttons". I used the rectangular shape with AESTHETIC tool > > button CORNERS ROUNDED to create different forms without any problem whatsoever.

  All of a sudden (without close AICS3), all my NEWLY CREATED rectangles behave strangely.

  None of my new rectangles allowed me to individually select anchor points. As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  When I choose the direct Selection (white arrow) tool, I can not select on the path itself and only the limit is displayed (with corner WHITE, no black points). Adjust this flat bounding box / distorts my rectangle, while the scales of adjustment with the black arrow rectangle. I can't use the scissors tool either. I can't add/remove is a path with the pen tool.

  I can't select individual anchor points.

  All of the 'old' generated rectangles are fine, I can select each path and anchor individually, but all rectangles later do not allow me to do.

  To add to the confusion, this only happens with rectangles. As you can see with the picture below. I can create any simple or complex form/paths, and I can choose individual anchors with no problems. Can I use the tool scissors without any problem or even the tool pen to add/remove a path to all other forms BUT the rectangle with corners rounded...

  

  Only the rounded rectangle tool shows the anchor 'blue '. Note that all four forms have been selected with the direct Selection (white arrow) tool. If I used the black arrow, then the selection should have been outside of the black lines of the rounded rectangle.

  What is going on? I deleted the AIPrefs, it isn't CTRL-H, I am really confused...

  Help, please. Thank you very much

  Dave

  As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  Yes, as it should be. Rounded corners is an effect and unrelated to the native rounded rectangle tool. In order for the paths, the effect should be expanded using the object--> Expand.

  Mylenium

• executable jar, a strange behavior

  Hello
  
  I noticed a strange behavior with a jar file executable that I just created.
  
  If I start from the command prompt with java-jar executablejarfile.jar, everything works well, but if I start it by double-clicking on the jar file, the application is visible more slowly and it stops working properly after a while.
  
  Any ideas what could cause this strange behavior?
  
  I use windows xp and java version "1.6.0_20.
  
  Thank you!

  user6102378 wrote:
  Hello

  I noticed a strange behavior with a jar file executable that I just created.

  If I start from the command prompt with java-jar executablejarfile.jar, everything works well, but if I start it by double-clicking on the jar file, the application is visible more slowly and it stops working properly after a while.

  Any ideas what could cause this strange behavior?

  I use windows xp and java version "1.6.0_20.

  Thank you!

  Under XP, I think you have some sort of options area in maybe control panel where you can configure the file assciations. Make sure that the .jar files are assciated with [java dir]/bin/javaw.exe

  If you do not find this test (I know it works on vista but I forget XP) right click on the .jar file, click "open with...". "and find javaw.exe and check the box that says always 'open with that '. If this doesn't work then reinstall java I guess that :D

• Firefox crashes (and other strange behaviors) due to gifs

  From a recent update Firefox displayed a strange behavior that surrounds the gifs. Sometimes, after viewing pages with a large number of gifs or several very large gifs, Firefox will do things like not animate gifs, or even do not load the images at all, an and will not stop until I have restart Firefox. What's more concerning is that sometimes in these situations, Firefox will simply hang and stop responding, forcing me to kill the process.
  This page shows the behavior of hanging fairly regularly: http://www.neogaf.com/forum/showthread.php?t=1021843 & page = 21
  It seems more likely to happen when I scroll the page quickly. The behavior persists when I restart Firefox mode without failure.

  39 of Firefox seems to have solved the problem.

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• Strange behavior USB Flash Drive Satellite A100-626

  Hello

  I did install Windows Vista Business Edition on my Satellite A100-626 (PSAA9) following the instructions provided in the Web page of drivers.

  So far, everything works as expected, except for one little (or no) question.

  When I ask Vista to 'Remove hardware safely' my USB Flash drive, a Popup appears telling me to remove it. So far, so good :D

  The only thing is that the flash player is not put out as could be expected and and yellow question mark appears in Device Manager.

  Opening of the question mark can read what follows:

  "Windows cannot use this hardware device because it has been developed to remove safely, but it has not been removed from the computer. (Code 47) To resolve this issue, disconnect the device from your computer and plug it in again. »

  Following the instructions above, the light turns off, lol...

  Someone else met this strange behavior? If so, any solution?

  I tried a few USB flashes that run well on XP and they both do the same thing.

  Thank you, Nuno!

  Hi Nuno

  It's very strange. I have the Satellite A100-504 (comes with Windows XP Home edition). Last week, I installed Vista and all the stuff followed Toshiba document instructions facilities. I use the mouse wireless, external HDD USB web cam. With the help of these external devices together I never noticed a similar behavior.

  You have the same situation with all the USB ports?

• redeclenchables strange behavior digital output

  I created a redeclenchables digital dashboard task (finished) digital output as follows: (in DAQmx C)

  DAQmxCreateTask("",&_taskHandle);
  DAQmxCreateDOChan(_taskHandle,"/Dev2/port0/line6","",DAQmx_Val_ChanPerLine);
  DAQmxCfgSampClkTiming (_taskHandle, "" / Dev2/Ctr0InternalOutput ", _clockRate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, static_cast (_sampleCount)");
  DAQmxCfgOutputBuffer (_taskHandle, static_cast (_sampleCount));
  DAQmxCfgDigEdgeStartTrig (_taskHandle, "/ Dev2/PFI4", DAQmx_Val_Rising ");
  DAQmxSetStartTrigRetriggerable (_taskHandle, true);
  DAQmxWriteDigitalLines (_taskHandle, static_cast(_sampleCount), FALSE,-1, DAQmx_Val_GroupByChannel, _pDigital, NULL, NULL);
  DAQmxStartTask (_taskHandle);

  sample clock:

  DAQmxCreateTask ("", & _taskHandleCO);
  DAQmxCreateCOPulseChanFreq (_taskHandleCO, "/ Dev2/ctr0","", DAQmx_Val_Hz, DAQmx_Val_Low, 0,0, _clockRate, 0.5 "");
  DAQmxCfgImplicitTiming (_taskHandleCO, DAQmx_Val_ContSamps, _numSamples);
  DAQmxStartTask (_taskHandleCO);

  When I run the task without redeclenchables parameter, it output a correct signal. However, if I run with redeclenchables it out almost exactly 2 times faster than normal. For example, a pulse whose width of 10 ms became 5 ms and repeats again to be 2 pulses of 5 ms. This is repeatable, no matter how much or how fast triggers provided.

  My card is PCIe-6363. I do not know what causes this strange behavior, and I hope someone can help on this.

  Thank you.

  It disappears after reset configuration. Might be interesting for future reviews.

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Strange behavior file open/create/replace

  Hi all

  I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

  Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

  Thanks for your time,

  Kind regards

  Harry

  Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

  (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

  See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

  Never use the paths as strings. There are very few cases where this would be appropriate.