Strange marks on the Filterglass - need help

Similar Questions

• 'Use the cartridges SETUP' error on the printer, need help!

  I bought the printer last year in the months of August and after 6 months of use, it started having problems printing wireless. I always had to use USB to print from my laptop so I was recommended by people in this forum to reset my printer to the factory.

  I have reset several times and nothing worked, so I was advised to do so by using the Cancel button and the middle button that reset the printer. Now the problem is it says "Cartridges use SETUP" and my printer is out of warranty, it expired last month. I'm really confused about what to do. I am a student and I still have the print job and I can't afford a new printer. Calling support has no idea what to do and email support does not because of my warranty as you exhale.

  My printer is a HP Deskjet printer Wireless 3070. Product number is CQ191B.

  I really need help has begun the new year of college and I have a lot of missions to print.

  Hi ExPLOiT786

  Dragon-fur asked me to chime in with this. I will send you a private message on this in order to proceed.

  Ciara

• I forgot the password need HELP

  I forgot my password for parental control and need to unlock them to install the new modem software.  Need HELP.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Mick Murphy - Microsoft partner

• try to connect to the network, need help.

  * - Original title - Help network!

  Im trying to connect to my network, but it won't let me go up. It says im not connected to any network, but im allowed to get on the internet... the network in the try icon has a red x through it, and no matter what im network I can get on the internet but not on the network. What should I do to fix this? I tried all of the troubleshooting steps and he says that there is nothing wrong,

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the full error message you get when you try to connect to the network?

  5. What are all the steps you've tried?

  6. how many computers is connected to the network?

  7 is the computer connected to a home network or domain?

  8. do you have a wired or wireless?

  Method 1.

  I suggest you follow the steps in this article.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Method 2.

  How can I solve the network card problems?: http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems

  Method 3.

  a. click "Start", go to run, type "services.msc" (without the quotation marks) in the Open box and press ENTER.

  b. click on the button continue to check the permission of the administrator.

  c. 'Knowledge of network locations' service right click and choose Properties.

  d. under the general tab, click Start.

  e. click next to automatic startup type.

  f. click OK.

  Restart the computer and check.

  Method 4.

  If the problem persists, please take a screenshot of the window "network and sharing Center" and upload it. After the screenshot of the problem you are experiencing. Click on the link: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-c620-401c-a804-9f6337cd3053

  I hope this helps.

• Hard drive controller is released on the PC need help with setting up new controller

  I have a HP with a built NVidia controller on the mobo.  The controller was an error and I am installing an Adaptec 2120SA on the system controller.  The computer sees the controller and it tries to start the operating system but has problems it BlueScreens and it blue screens quickly so I do not see the error code.  but I think it's because I don't have the drivers of the controller installed in the operating system.  I really don't want to reload the workstation.  Is it possible to install the drivers of the controller without starting the operating system I tried three other PC and they all have the same questions. as the driver for the controller is not there.  The OS is Vista Home Premium 64-bit.  The PC is no longer under warranty and a replacement MoBo is too much money.

  Thanks in advance for your help.

  Hi arjaywolverine,

  There is a way that can be attempted to identify the problem and we'll see if it helps.
  You need to extract the driver file from hard drive controller on a floppy/flash your motherboard CD drive, and then you restart the computer with the Windows Vista operating system DVD.

  1. turn on your computer and insert the CD or the DVD of Windows Vista.
  2. on the page install Windows, do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  3. click load drivers and it prompts you to insert your floppy disk or USB key.
  4. navigate to the correct device and click Ok.

  Once the drivers are installed correctly, remove the DVD and diskette. Restart the computer and who should do it.

  Hope this information is useful.
  Karena R - Microsoft Support
  --------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• HP 50 g RPL program to list the factors needing help the formatted output; Matrices, vectors, lists, etc.?

  Hello

  I have not always perfer the output of the DIVIS HP 50 g.

  DIVIDED lists all the factors of a number in a way that is ineffiecent and confusing when there are many factors of a given number.

  For example, when you run 1000 DIVIS you are treated to a large "block" of numbers organized vertically in such a way that only 4-5 of the 16 factors of 1000 are still visible to you without additional keys.

  I'm trying to create a program that simply formats the output of DIVIS differently when there are a lot of factors for a given number. I'm a newbie to the USER RPL. I have the factors that come out a while loop in this format. (100, 10) Unfortunately, my time loop depends on these factors enters NOT the battery until AFTER he calculated all the. I need to find a way to store a set of factors by the execution of the loop in a kind of variable, and then remind each other both on the stack at the end of the program execution. If the code is necessary for you to see, I can post it. The problem is that it is unclear how many factors will be present at this stage. It will be the original number / 2 because I have through each pair of factor in jurisdiction parens with R-> C. In addition, the capture method must be in the loop because that if it is not the loop won't work correctly because the method by which he organized the factors in their concerned couples depends on a process of battery undisturbed during the execution of the loop. Leaving the parens at the bottom of the battery causes there are an odd number of factors in the stack, which invalidates my program for various reasons. In addition, it would be useful to include a function that could test whether or not the number of factors of an odd number, because I will need to include separate code for this. I don't know any such function in USER - RPL, but I am a beginner in this area. Thanks for any help!

  Zekelegge

  Ranothil wrote:
  (...)

  For 1000, my dream program would output;

  (...)

  Try this:

  ' DUP DIVIS SWAP ON / SWAP R-> C EVAL.

  or:

  "DIVIS DUP DUP SIZE 2 / 1 SWAP SUB DUP UNROT / R-> REVLIST C EVAL.
  
  

• 5 D Mark III video problem - need help!

  Hello

  Been using my 5 d Mark III for video for about a month now. I noticed a problem occurring in the middle of some plans where the color seems to pass. The problem is so weak that it will take full screen, full HD and a high level of concentration to detect. In my opinion, the most obvious presence is 28 seconds where the valley below suddenly takes a different color. Here is a video of my question: http://www.youtube.com/watch?v=Xw9IHYkUEqQ

  I performed these parameters:

  Manual focus

  Opening, ISO: Manually set

  Shutter speed: 1/50

  1920 x 1080 EVERYTHING I have 24 p

  Photo Style: faithful

  Custom white balance

  Auto Lighting Optimizer: OFF

  Highlight priority: OFF

  Speed High ISO NR: OFF

  I tried to see if they were detectable on the LCD on the camera, but to the naked eye, they are not. The original. Show them the MOV files that were transferred from the camera.

  Maybe that Chromatic Aberration or the peripheral illumination Correction? I did not disable these, and they are the only automatic settings I can think that would change Mid-shot.

  In my view, what ISO was set at 100 for these plans.

  Any ideas what could be causing this? Any suggestions would be much appreciated!

  Thank you

  Max

  I tested it on multiple devices, and it seems that there is a problem with my primary monitor. I will definitely test it next time I have a problem on multiple devices. Thanks for all the help!

• Strange marks on the screen

  Hello

  First of all thanks for this great forum find information on my new pre. I'm having a problem with 2 white spots my

  screen that I can't seem to come off. The strange thing is that I can see them only when certain colors are on the mainly blue screen.

  I just wanted to see if it was something I have to worry because I don't see them all the time.

  Thank you

  Cheese

  "I was told that there is a problem with LCD screens that can not be helped. My question is if it happen so fast? »

  Dead pixels (light or miscolored points or areas) are likely to occur sooner rather than later, because they are caused by a defect. These flaws are inherent in the process of putting electronic components individual 1 million on PRE screen.

  'Stuck' pixels (dead pixels) can appear at any time and can sometimes be fixed by flashing of the patterns of color on the screen. Once the SDK is released we'll probably see some apps for it immediately because they are simple.

• As the syntax need help

  I need code that starts with 't', '3', 'U', but the code below does not work. Can someone help me with the correct syntax.
  
  

  code like ('T%','3%','U%')

  Published by: varun on May 4, 2012 15:32

  Hello

  Varun says:
  I need code that starts with 't', '3', 'U', but the code below does not work. Can someone help me with the correct syntax.

  code like ('T%','3%','U%')
  

  Sorry, you can not do this. LIKE takes exactly 2 operands. Neither one can be a list, and you cannot use ALL, ALL or OPERATORS with LIKE.

  If you don't want to write 3 conditions, connected by OR, then look for something more LIKE to get the desired results.

  In this example, you are only interested in the 1st character. SUBSTR is an easy way to get the first character, so you can say

  SUBSTR (code, 1, 1)   IN ('T', '3', 'U')
  

  which is how I would prefer to do this particular task, although AS worked as you tried.

  Otherwise, try regular expressions, you can consider SIMILAR on steroids:

  REGEXP_LIKE ( code
              , '^(T|3|U)'
              )
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

  Published by: Frank Kulash, may 4, 2012 18:38

• positioning of provision in the Center - need help!

  Hello

  Usually, I have no problem a layout of balance - I just select the table and click "Align Center" and voila!

  But the site I worked on has caused me no end of problems. It was designed in Fireworks by someone who had used buttons to form diamond for the navigation bar. So when I got to decide the page I really have trouble using slices of standard form. The only way around it (that I could see) was to create hot spots so that I could create the shape I needed. In any case...

  Now, I can not Center the table either, and when I move the table to the right using css margins (for trying to cheat), the drop-down menu remains where he is, doesn't 'pop up' under the correct button. Is it because of hot spots, or context menu created in Fireworks?

  Can anyone help? PLEASE?

  http://www.applebybowers.com/minima_web/

  PS: now that you've made the changes on the home page, you must go to the other pages and make the same change to the html code - i.e. - adding the new wrapper around the table.

  You will not have to make any other changes to the style sheet, as you have already stated that the rule and the rule of #wrapper will be read from each page that contains the wrapper div.

• Using windows XP: whed download afthe the beginning of download Turbo tax program an error message appears saying "user lacks administrative privileges to perform the task"need help"

  I bought a turbo tax download and during the download of the process I ge an error message (1321) saying ' windows install has sufficient privileges to install or change the file. "

  Hello

  1. have you logged as administrator?

  2 are you able to install other programs?

  I suggest to follow the steps in the following article and check if it helps.

  http://TurboTax.Intuit.com/support/IQ/install-product/error-1321--Installer-doesn-t-have-permission/SLN12336.html

  If you are always faced with the question, then I recommend you contact Turbo tax support for more help.

  http://TurboTax.Intuit.com/support/

  Hope this helps

• Try a repair of the system need help

  Does anyone know the user id and the password that is listed as step # 5 in the Startup Repair: frequently asked questions pre installed recovery options? Thank you

  Hello

  The user ID is the name of the user account and if you have set a password for connection which would be your password.
  If you are not using any password, just click OK.
  Also, I would say this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  I hope this information helps you!

• I forgot the password need help cant closed system don't remember log in password just changed and simply forgotten! Help, please...

  OS Vista sp 2 IE 8

  I just changed my password, log and I can remember? Help!

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Icon blackBerry Smartphones BBM missing after the update. need help ASAP please

  Hi I'm using a bb bold 9780 and my bbm is 5.0.1.45 and when I tried to update, it hangs whenever he finishes the installation. And when I got tired of a battery pull, my bbm icon is missing. No idea how to solve this problem? Could really use some help here cos its pretty impt. Thanks in advance

  Hi aaron1212,

  If running above doesn't solve the problem then try this link for installing BBM:http://mobileapps.blackberry.com/devicesoftware/entry.do?code=bbm6

• Major of the system, need help maintaining win-7 against breaking

  In the next two weeks, I will undergo a complete upgrade of the system. My current computer began as a flag of hp (not sure of the exact model, if necessary I'll find it however) and I have since done several minor upgrades (added 8 GB of ram, changed the power supply from stock to a 750w coolermaster and put in a Sapphire radeon 6850 GPUS), now I will keep the same hard drive, ram PSU, gpu. I will change the motherboard (for a msi z77a-g45-thunderbolt), the processor (a 3750 Ivy bridge k i5 intel), the case (for a complete tour of the haf 932) and the heat sink (for a coolermaster hyper 212 plus), my current characteristics are

  Operating system

  Microsoft Windows 7 Home Premium 64 - bit SP1

  CENTRAL PROCESSING UNIT

  AMD Athlon II X 4 640

  Propus 45nm technology

  RAM

  12.0 GB Dual-Channel DDR3 @ 666 MHz (9-9-9-24)

  Motherboard

  FOXCONN 2AB1 (CPU 1)

  Graphics

  AMD Radeon HD 6800 series (Sapphire/PCPartner)

  Hard drives

  932GB Hitachi HDS721010CLA332 peripheral of SATA (SATA) drive

  Optical drives

  HP DVD a Beltway. DH16ABLH SATA CdRom

  Audio

  Realtek High Definition Audio
  As I said, I will keep the hard drive, however, I know that windows WILL break when he realizes that the mobo is different, I need to know how to fix driver problems, and how to keep win-7 registrant or re - record legally without having to buy another copy.
  more information
  When I bought the computer, windows is already installed and registered. Since then, I had to turn in the computer under warranty to hp once (for a dead motherboard) the motherboard was replaced, and my data have not changed. I still have to perform the upgrade (and won't for another 2 weeks or more), so I have full access to the data.

  If you replace the motherboard of the system won't accept or if it does not, turn on period.

  You have an oem version of win provided by its only valid for the origonal hardware HP, namely the motherboard.

  If you want to upgrade the major component of a PC, the motherboard, buy a commercial version of victory