strange problem with a virtual machine in VC2.5 U3

Similar Questions

• where can I report a problem with a virtual machine died, which I can't save now?

  It looks like a lot of places, but it is not clear where I should take this problem to.

  where can I report a problem with a virtual machine died, which I can't save now?

  He is buried in the VMware Community Infrastructure - here is the link to this forum - http://communities.vmware.com/community/vmtn/server/vi/esx3.5

• Strange problem with its virtual on my Satellite A100

  I have a problem with Virtual Sound on my Satellite A100-638 with Windows XP. If VS is turned on and Windows plays a sound of Windows, as when an error appears, the volume increases.

  When the VS is off, the problem does not exist, but I would have turned on VS, cause, I play a lot of music! I tried to upgrade level or upgrade to other versions of VS, but the problem is still there. I also tried to uninstall and install my sound card drivers.

  Can someone help me with this?

  Hello

  I put t know what is the problem. Your description is incomplete and very strange.
  Usually it's not easy to say what's wrong because you have already installed the 3rd party applications that could only unique functions or have a bad influence on all operating systems.
  I assume that the registry is damaged.

  If we can continue the speculation after the recovery completely portable.

• Problem with initialization virtual machine OlioDB

  Hello

  I have been using VMmark 2.1 six months spent for our performance appraisals. I recently started seeing the following error message when the harness trying to boot the virtual machine OlioDB0:

  Stafcmd: Tile0: FS copy the file: ConfigServer_OLIOjspDB.sh failed with RC = 22, STARFResult = STAFConnectionWriteUInt: error writing to the socket: send() RC = 10054:22

  I can ping the virtual computer, I can also ping using STAF (oliodb0 STAF-> pong ping ping).

  If I change the WORKLOADLIST in the vmmark2.config file so that it includes OlioDB, initialization is going through and I can see the virtual machine making initialization. But when WORKLOADLIST revert to the original, I get the above error message. I would appreciate your help to try to solve the problem.

  Thank you

  Amin

  Sorry, my apologies, I understood the question. I had another copy of the same virtual machine running on a separate server, which caused a conflict of IP address with the main VM that the test sought to initialize. I got rid of the copy and everything started to work very well.

• problem with VCB virtual machine identified by < unset > is unknown

  Hello

  I have three ESX 3.5 in a cluster with an EVA SAN. When I do my backup, I get this message for some of my virtual machines. The majority of my backup work well...

  PrepareForBackup() could not prepare TermServer for backup, returned the error 16

  The virtual machine identified by & lt; unset & gt; is unknown.

  Exit code: 16

  Pre order is: "C:\Program VMware Consolidated Backup Framework\backupexec\Green-pre-backup.bat" green-Termserver TermServer - fullVM

  In Virtual Center, the name of the virtual computer is TermServer, the folder on my SAN is TermServer and all files, named according to the name of vm, have 'TermServer' in their name.

  Any idea?

  Hello

  I think that you have a DNS problem, you use - ipaddr in config. file for VCB?

  Try ping TermServer, you can resolve the name?

• Is that a catastrophic problem with BootCamp / virtual machines or something else?

  Just had a catasrophic with BootCamp problem

  My MBP was running a bit lazy, so Apple gave me a few instructions on how to fix this, including linking the installation discs for the disk utility and empty all of my folders cache under OSX.  Don't know if any of this slow and crashing was something to do with the installation of the latest update to OSX

  All of a sudden when I came back to Windows in the usual manner, the installation of windows in the VM required activation. Needless to say I had to activate windows every time I spent Bootcamp in OSX and/or then the merger to get to Windows, I had to re-activate so finally that Microsoft is beginning to think that someone is to install Windows on multiple computers and telephone activation becomes a nightmare.

  But even worse, when I managed to understand what product key that I used for bootcamp and started windows, EACH CONFIGURATION MADE OVER A YEAR or so AND EACH SOFTWARE INSTALLATION HAD DISAPPEARED, I HAD!  Without a windows installation process, I've been frame with a soft-install windows desktop with all my lost favorites. Leading to an even bigger nightmare in the re-installation of hundreds of evidence hours of software.  He had two meager records to show that I was in the right place and that everything is not contained in another folder and a file or two, but I wonder if all these installation information is contained in a cache in the directory structure Active Directory OSX? If so, is it possible to identify the files or the folders in which cache directory must be saved?

  If this is the case, I never dreamed that something to do with the windows installation was contained in the OSX directory structure?  Surely if this is the case, there should be a strong warning on it?   Admittedlythe Windows Setup WAS a bit slow before the "incident", but I doubt that there is something deeply wrong, and in any event I ran just a fully updated Adaware and Spybot so this problem is probably not a virus. (I don't use email merge)

  If this is the case, is - can anyone identify records needing backup before you empty the caches under OSX?  I don't think THAT many here would have been recovered by the take a snapshot could it? (anyway, I could not in windows without this activation)

  FWIW, the only way I can see what is a matter of merger is if by chance you're under Fusion 2.0.0, which had a fatal flaw it would partition Boot Camp Virtual Machine to take a snap, and if you did not start in native mode again you probably will not notice immediately that all changes have been written in a disc rather than the disc file physics itself and then if we deleted the virtual Boot Camp Machine partition a situation such that you described could have similar results.

  Another thing to look at is C:\Program Files in the Windows directory and see if it contains all the applications you have installed once and if she doesn't then it's quite possible that you run Windows from a default registry hive, which of course contains no information on changes since Windows has been installed but you have really not provide adequate details on what you were in fact under the leadership of Apple technology to get where you currently are, so there is not much that I can offer.

• VMware Workstation with ESX3.5u4 - problems with the virtual machines within ESX3.5u4

  Hello world

  I really need a consultation on this one:

  I'm testing ESX3.5.

  As I don't want to buy any material for now I thought it would be a good idea to test ESX3.5 in my computer.

  I used this model to install ESX3.5 in my computer: http://xtravirt.com/node/100

  ESX3.5 works perfektly in workstation.

  The only problem is that if I create a computer virtual within the VM ESX3.5 works very very slow.

  I searched on the VMware Forum for this problem and found that you need Intel VT enabled to speed things up.

  But I think that my "Intel (r) Core (TM) 2 Quad CPU Q9300 @ 2.50 GHz, 2000 MHz" should have Intel VT.

  Does anyone have any ideas why my VMs on esx3.5 within the short slow workstation?

  Thank you all in advance for the help!

  Material used:

  ASUS P5B

  Intel Quad Core Q9300

  3 GB RAM

  Intel PRO/100 S-Serveradapter Ethernet

  According to your log file, the external VM using VT - x.  I'm afraid, it's as fast as your nested VMS are going to get.  While I would qualify as slow or even nested VM performance very slow, I'm not sure I'd go so far as "very very slow."  It is perhaps a matter of perception.

• With the help of gsoap/C++ web SDK problem reconfiguring the Virtual Machine

  Hi all, I m using gsoap/C++ with web service sdk to monitor virtual machines.

  I m able to enumerate the current list of virtual machines, total number of vm. Now I m trying to reconfigure the virtual machine. My Code snippet is as below.

  The virtual machine is running and I m trying to change the ram, I did it using java api and it doesn't butfor c ++ it is in error.

  ns1__VirualMachineConfigSpec vmSpec;

  ival long 64;

  vmSpec - & gt; memoryMB = & ival;

  ns1__ReconfigVMRequestType reconfigVMRequestType;

  reconfigVMRequestType.spc = & vmSpec;

  reconfigVMRequestType._USCOREthis = vmObject - & gt; obj; managed object - virtual machine

  NS1_ReconfigVM_USCORETaskResponse reconfigVMResponse;

  ns1__ManagedObjectReference * morResult = 0;

  If (vim - & gt; __ns1__ReconfigVM_USCORETask (reconfigVMRequestType, & reconfigVMResponse) == SOAP_OK) {}

  morResult = reconfigVMResponse.returnval;

  } else cost & lt; & lt; "Unable to machine virtual reconfig." & lt; & lt; ENDL;

  Now in vSphere Client it show me error like.

  The operation is not supported on the object.

  And on server esxi in file /var/log/vmware/hostd.log it not show gives following error.

  The task was created: haTask-32 - vim.VirtualMachine.reconfigure - 1422

  2009-08-26 20:54:17.669 verbose 149A5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure: (vim.vm.ConfigSpec) {}

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  2009-08-26 20:54:18.122 149A5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_ON - & gt; VM_STATE_RECONFIGURING)

  2009-08-26 20:54:18.125 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Memory hot asked.

  Load: Existing file loading: /etc/vmware/license.cfg

  2009-08-26 20:54:18.139 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Verified hot license

  CloseSession called for the session id = 52f7f6aa-3ef8-c52a - 815 a - 75B 421405075

  Event 714: Root user is disconnected

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: version 32 overflow name aggregation

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: aggregate the version 32 overflow triggeredAlarmState

  2009-08-26 20:54:18.979 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Current state of the VM management: disabled

  2009-08-26 20:54:19.071 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Implementation State of follow-up to the virtual computer for people with reduced mobility.

  Ability to root pool has changed to 1104 MHz / 521MB in 1104 MHz / 520MB

  2009-08-26 20:54:21.108 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Remove hot memory not supported: newMemory: 64, curMemory: 128

  2009-08-26 20:54:21.110 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Batch hot failed during the application of the individual changes.

  2009-08-26 20:54:21.113 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure is not

  2009-08-26 20:54:21.114 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Exception that is thrown when the statement reconfigures: {(vim.vm.ConfigSpec)

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  vmodl.fault.NotSupported

  2009-08-26 20:54:21.177 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_RECONFIGURING - & gt; VM_STATE_ON)

  2009-08-26 20:54:21.180 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Authentication data that are not available during activation

  Event 715: Reconfigured Win Vista on kudosiesxi118 ha-data center

  Change of State received for VM ' 32 "

  2009-08-26 20:54:21.598 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Time to pick up some config: 415 (MS)

  Task completed: error status haTask-32 - vim.VirtualMachine.reconfigure - 1422

  Add vm 32 to poweredOnVms list

  2009-08-26 20:54:21.694 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure the worker thread failed

  Problem in the virtual machine is in the power on State or I m doing something wrong?

  Can any body tell me where I m wrong?

  Rather than use a C string, try using the String object.  In my C++ sources generated the WSDL, the expected properties are string objects and references to string objects, not strings C.

• How to share a USB with a virtual machine raw device?

  Hey,.

  I have a TEMPer PCSensor USB device I want to share with a virtual machine.

  When he connect on my MacBook, I see it as a USB device in System Profiler as shown here:

  

  The problem is that there is no OS X driver that is appropriate for that. So while it has detected the USB device and read data from string device, Snow Leopard is not actually load anything to support this material. This means, in my view, that he does not see merger as a USB device is valid to be shared with the virtual machine.

  

  Does anyone know how to force the merger of share this USB without driver with the virtual machine please? The VM knows EXACTLY what to do with this device.

  Thank you

  Tom

  ---

  VCP, VCI, MBCS CITP

  If System Profiler can see the USB device, it should appear in the list of devices that can be connected to a virtual machine. The only exception is if it is a HID-class, which are automatically filtered device. See USB HID the User Guide running A VMware Fusion for an explanation and a workaround.

• Problem migrating a virtual machine

  Hello!

  I have a problem when I try to migrate a virtual machine to the concrete only two hosts. I have no problem in other guests in my infrastructure. When I try to start this operation I get the following error message: "cannot migrate from esx1.domain.com to esx2.domain.com: the host CPU is incompatible with the function CPU requirementes of the virtual machine; problem detected the CPUID level 0 x 80000001 register edx.

  With other virtual machines, I have no problem and I can migrate from any host to any of them.

  Hi Eric,.

  Please check this link below:

  http://KB.VMware.com/selfservice/viewContent.do?externalId=1001131&sliceId=1

  Seems to be the answer to your problems.

  Please give feedback if this solves the problem

  Concerning

  If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

• Strange problem with HP OfficeJet 6500 709n

  I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

  The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

  No idea why this is happening and how to fix it?  Thank you.

  This problem of not being able to scan only started after upgrade to Windows 8?

  If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

  To uninstall the software, follow these steps:

  1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
  2. click or tap the name of your HP printer, and then click or tap on uninstall.
  3. follow the on-screen instructions to uninstall the software.

  After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

  Driver and HP Officejet Full Feature software

  Install this version of the software and try to scan now!

  Let me know if it works for you, good luck!

  -Kyle

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM