Windows wireless service is not activated.

My phone is trippin. I can't get my wireless to work. Whenever I click network diagnostics to repair it, he used.

Hello

The value of all services back to their default values.
http://www.blackviper.com/WinVista/servicecfg.htm

Start - type in the area of research-> Services find top - make a right click on - RUN AS ADMIN

Then actually try updating your driver:

Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

Download - SAVE - go where you put it - right click – RUN AS ADMIN.

You can download several at once however restart after the installation of each of them.

After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).

Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.

I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-----------------------------------------------------

Check this box:

Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194

Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us

----------------------------------------------------

And:

Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Windows wireless service is not running on this computer

    I have a Gateway laptop running 32-bit Vista SP2 I can't connect to wireless networks. One day, I had no problems and the next, I am unable to find all the networks.  When I try to connect to a network, I get a message that Windows cannot find any network.  When diagnosing why link is clicked I get an error dialog box "Windows Wireless Service is not running on this computer. When the Windows network diagnostics dialogue box I click on 'Start Windows Wireless Service' and then told me that Windows cannot resolve the problem and ask contact me my network administrator or ISP.

    I tried several fixes of different forums and nothing has worked.  I ran the antivirus scans that have not found anything.  Y at - it a fix for this problem?

    Hello
     
    1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
    2. do you have any security software installed on the computer?
    3. have you made changes on the computer recently?
     
    We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
    1. Click Start, type services.msc and press to enter.
    2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
    3. on the general tab, change the startup type to automatic and click on the Start button.
    4. click on apply, then ok.
     
    Try to connect to the wireless connection and check the result.
     
    If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
     
    For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
     
    Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.
     
    Kind regards
    Syed V
    Answers from Microsoft supports the engineer.

  • Windows Vista - Windows Wireless Service is not running after automatic update

    I ran a windows vista family premium auto update and then I don't have a WiFi connection.  It is said that the Windows Wireless Service does not on my computer and when I try to start it, it says windows can not solve the problem.  I tried to restore the system before the update, however, I get an "unspecified error" does not restore to be completed.  I am very frustrated and need no help available if you please.  Thank you.

    Hello

    First, check with the WLAN service is started and set to automatic, if the WLAN service is stopped, I suggest you to start the service and put it on automatic.

    Method 1:
    Follow the steps to start the WLAN service.

    (a) click Start, type services.msc
    (b) select autoconfiguration WLAN service in the list, right-click on properties
    (c) change the startup type to automatic
    (d) click the Start button
    (e), click on apply, Ok.
    (f) restart the computer and check if it works.

    The majority of connection in Windows vista problems have been resolved by installing the latest version of the driver for the NIC obtained from the manufacturer.

    Method 2: Try to update the Wireless driver and check to see if the same problem happens.

    a. click on start

    b. right click on computer

    c. click Properties

    d. click on Device Manager on the left hand side

    e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
    f. click on the driver tab, click Update driver and then follow the instructions.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, see: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

    Method 3: Also, try the steps from the link below:http://windows.microsoft.com/en-us/windows/help/wireless-network-connection-problems-in-windows

    Hope this information is useful.

  • Windows 7 wireless error - 'Windows wireless service is not running on this computer.

    I've recently upgraded from Windows XP to Windows 7 and have been happy using computer and connection to wireless networks. Shut down last night, and when I turned on the computer this morning, I noticed that he was not to connect to my home wireless network. Thought my network might have a problem then rebooted my router, but everything works and my other computer is connected. A Windows "diagnose" the problem and got the error message "windows wireless service is not running on this computer. Tried to fix the problem, but could not be determined. Now don't know what to do. Plugged into my router with a cable, but wireless seems quite dead. Any suggestions?


    Thank you

    TO activate the wireless service: click Start, type services.msc and press ENTER. Scroll down to 'wireless zero configuration' and right-click on it and select Properties. Set it to automatic and not Diaslbed and press the Start button, and then click OK. Who should start the service.   My "> favorite sons |" Computer tips contact | "Widget" programs (join my Folding@home team!)

  • Wireless connection error - error 193:Oxc1 - Windows wireless service does not work

    I have a Dell Studio XPS until yesterday worked fine. I plug in a memory (USB) card and that's when the problem occurred.

    Today when I started, it connect to internet via WiFi. The map shows in Device Manager and are passed through controls to enable the automatic. Wired connection is not a problem that's just a very long Ethernet run and WiFi was better. I have other computers on the network, there is a problem with what I think is that the registry is corrupted. It seems that the Wireless LAN and audio are butting heads as the audio is displayed as an X when I try to fix the connection.

    On the bottom bar on Windows 7, it shows a signal with an X on it. Help, please!

    Windows Wireless Service is not running

    Error 193:Oxc1

    Thank you

    Hello

    Please perform a clean boot mode, press Windows key + R on your keyboard and type services.msc. Access to services that are defined as disabled and edit them in the manual.

    Restart your computer (stay in a clean boot) and return to services.msc. Do not open any other application or browser. Any device that is set to automatic, but it is not started, change its startup type to manual. Any application that is manual, but is started, the change automatically.

    I also recommend that run you check disk, to check for any errors/bad hard disk sectors.

    How to run the disk check

    http://support.Microsoft.com/kb/2641432/en-GB

    Thank you

    Legaede

  • WIFI ON MY SONY VAIO E SERIES SAYS WINDOWS WIRELESS SERVICE DOES NOT

    My Sony VAIO E Series windows wireless service does not

    the computer says that

    Hi Isabel,.

    1. Exactly when you receive this message? It's trying to access wireless internet?
    2. What is the exact model of your PC laptop Sony Vaio E series?

    Make sure that the laptop wireless switch is turned on.

    Method 1:

    Please follow the steps to start the WLAN service.

    1. Press the Windows key and R together to open run prompt and type services.msc
    2. Select the autoconfiguration WLAN service in the list, right-click on properties
    3. Change the startup type to automatic
    4. Click the Start button
    5. Click on apply, Ok.
    6. Restart the computer and check if it works.

    If the problem persists, proceed from the link below to fix this problem.

    Wireless and wired network problems.

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

    Original title: I do not see my available networks

    I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

    Hello

    1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
    2. do you have security software installed on the computer? If Yes, is it updated regularly?

    3. have you done any software or hardware changes on your computer before this problem?

    4. What are the troubleshooting steps you have tried to solve the problem?

    Refer to these methods.


    Method 1:

    We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

    (a) click Start, type Services.msc and press enter.

    (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

    (c) on the general tab, change the Startup type to Automatic and click on the Start button.

    (d) click apply and then click ok.

    (e) try to connect to the wireless connection and check the result.

    See also:

    For more information on the wireless settings, see this link:

    http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

    Method 2:

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    See also:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Check if it helps.

  • Windows 7 Premium: windows wireless services does not

    I am running Windows 7 premium. When I try to connect to the internet it says that windows wireless service does not not need help solve the problem...

    Hello

    1. What is the full error message?

    2. who is the antivirus installed on the computer program?

    I suggest you to perform the steps mentioned by ' Waseemulla Shariff said on February 11, 2010' a similar discussion.»

    Windows wireless service is not running on this computer

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-wireless-service-is-not-running-on-this/52558cc3-0b8f-475D-beb8-3d8127808d2a

    Note: It is for Windows 7.

    Hope this information helps. Response with status so that we can help you.

  • Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

    Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

    I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

    Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

    I hope this helps.

  • Windows wireless service does not

    Hi, I have not used my network wireless for many years of my laptop. I just bought a wireless router but now my laptop it. Then my friend set up the router and use the wireless connection, my laptop says that it doesn't have a windows wireless installation. It is not able to find any wireless connection. I checked the Device Manager and the wireless card works fine. Help, please.

    Hi Manish,

    There seems to be a problem with wireless connections.

    Perform the steps from the link below and see if it helps.

    Windows wireless and wired network connection problems 

    Hope this information helps.

  • (Wireless) service does not, access denied - Windows 7

    I am running Windows 7 family and have just started to loss of internet connection.  I had recently bought and ran the software PC Matic, perform a scan and an option "auto-fix".  He seemed to have lost the WiFi connection as well, but I'm not sure.  The only thing I know is that my Wireless Service does not and shows "stopped" in the Task Manager, and the service is "automatic".

    When I try to 'start' Wireless Service, a dialog box appears informing me that "access denied."  How can I fix it?

    Help, please...

    Hey, Kent.

    Thanks for posting your concern. Let's see if there are programs or applications that blocks the internet connection by performing a clean boot. Please see the instructions under "Windows 7 and Windows Vista" in this link: How to perform a boot in Windows.

    We can also check if there are some files corrupt or broken update installed that is blocking the connection by running the file system (CFS) auditor. Please follow the steps below:

    1. press on the Windows key on your keyboard.
    2 type cmd, then right click on the result, then choose Run as Administrator.
    3. enter sfc/scannow.
    4. hit enter.

    Keep us in the loop for updates.

    Kind regards
    Monica cam

    If you find this article useful, please mark as answer.

  • trying to install my new printer wireless, keep saying window installation service could not be accessed.

    trying to install my new printer wireless, keep saying

    Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.
    I'm not running in safe mode...

    Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...

  • Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

    I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

    Hello

    1. are you able to install other programs?

    2 have you made any changes to the computer before the show?

    Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2: Start the Windows Installer service

    See the following steps:

    a. click Start, type Services.msc and press {ENTER}
    b. double-click Windows Installer
    c. set the startup type of Windows Installer to automatic
    d. Click Start to start the service. Note the error message, if any.
    e. click OK.

    Method 3: Unsubscribe and re - register the Windows Setup program.

    See the following steps:

    a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

    Note: Even if you do it right, it may seem that nothing is happening.

    b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

    Note: After you run this command, the operation is complete.

    c. try your application based on Windows Installer again.

    Method 4: SFC scanner.

    Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929833

  • Windows Installer error - "Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

    Original title: Windows Installer could not access
    I am running Vista Home Premium x 64.  Recently when I try to install/upgrade programs up-to-date currently any Apple IE iTunes Quicktime and Safari I get this message.

    Windows Installer service could not be accessed.  This can occur if Windows Installer is not installed properly.

    The window update fails on the stage of the installation.  I have read several threads and tried several fixes, but without success.
    I have disabled/restarted/activated/restarted and switched to manual, auto and back with no success. When I try to force an early Setup, I get the following message:
    The Windows Installer service on Local computer started and then stopped.  Some services stop automatically that they are not in use by other services or programs. 
    I deleted the temp under apps folder.  I copied the reg. Since a sound Vista machine and imported into my machine setup.  I tried again with a reg. offered in one of the sons, all with no change.
    I tried to install version 4.5, but was unsuccessful (it looks like I got lucky there).
    May be related or yet another problem, whenever I have Windows Live Mail, a ope 'preparation for the installation of window lights up for about 15 seconds before disappearing and then my mail opens.
    I don't have a Vista CD.  My HP provides on a partitioned drive recovery files.  There seems to be no usable on my computer restore points.
    Ideas?  Help?
     

    Hello

    What happened when you tried to install Windows install version 4.5? You get an error?

    Follow these methods and check if it solves the problem:

    Method 1:
    Auditor of files (SFC) system scan on your computer. SFCscanwill make Windows replace corrupted or missing system files on your computer.

    Scan sfc enforcement procedure:
    1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    2. click on continue or provide administrator credentials if prompted.
    3. in the command prompt window, type the following text, and then press ENTER:
    sfc/scannow

    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833

    Method 2:
    After analysis of SFC running, try again to install Windows Installer 4.5 Redistributable.

    Refer to this article:
    http://support.Microsoft.com/kb/942288/en-AU

     

    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Installer service is not correctly registered

    I need to download. Net3.5 SP1 for TurboTax. When you attempt to load the software, I have to questions that said. NET2 did not work properly. I deleted the file and I try to reintall. NET2 however I get an error windows installer service is not properly registered and won't complete installation. How can I register WIS? I also had BOUNCING messages saying that setup.exe ran in another program, even though I was not running another program. It's somehow connected?

    Windows Installer error, see...

    Blog of Aaron Stebner: TurboTax 2009 can not settle because he thinks of the .NET Framework is not installed, even when it is
    http://blogs.msdn.com/astebner/archive/2010/01/26/9953883.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • normalize the region settings

    Where is to normalize the region settings in Logic pro X 10.2.4? Thank you Paul

  • How to decrease the width of the sidebar bookmarks?

    I wish that the bookmarks sidebar to be narrower than allowed default range for the width. I have tried many tips, without success. I tried to create something like userChrome.css with the recommended snippet inside, but it did not work. Others have

  • office documents not deleted in trash

    I'm the office for a small business Support Analyst. I have a Windows XP Pro machine running Office 2010, when you delete a document office he died does not appear in the Recycle Bin. I searched for the article and that you do not, it seems as if she

  • can I keep Windows 7, without having any problems?

    Original title: Windows 10 Windows 7 is more useful and understandble to me, then I keep it, without having any problems?

  • Run the report and form 12 c

    HelloAs in D2k we where using ifrun.exe to run the Oracle report and form module giving a parameter, in the form of 12 c and point out how we're going to run the package.In the ifrun.exe target us where giving asC:\ORANT\BIN\ifrun60. EXE C:\ERP\ERP\E