Strange problem with on my Satellite A200-1 SD card reader has 9 & A100-338

Similar Questions

• Problem with SD for Satellite A200 - 244 (PSAE6E) card reader

  Dear all,

  I recently bought a * _Satellite A200-244 (PSAE6E_ *) laptop to the United Kingdom and who is currently working in Oman. Problem is I won't be visiting UK for awhile so not able to take the laptop

  After taking a few photos, I decided to use my "Sony Memory Stick Pro Duo" in my card reader integrated.

  _ * I get the following errors: * _

  (1) the clear blue screen for the map turns on and then turns off right away.
  (2) my laptop does not say this new card or device found.
  "(3) in my computer," (g) removable disk appears, but when I double click on it an error message appears stating "Please insert a disk into removable disk".

  _ * Things I tried: * _
  (1) used the card memory on other laptops (vista and xp) and it is reading the device immediately and I can see my photos.
  (2) I re-installed ' T1 multiple Digital Media Card Reader "but no progress.
  (3) given that I don't have the Vista recovery disc, I have re install Vista but still the same problem.

  I'm really angry at all this and it bothered me a lot. I hope that someone who had the problem or similar experience and has managed to solve this problem.
  Or someone who has encountered this problem and know a solution, then I'll be very grateful if you can help.

  I'll be happy to answer your questions or provide more details.

  My e-mail address is = * [email protected] *.

  Thank you

  Concerning

  Atif

  Hello

  I use card Memory Stick Pro Duo high speed with my cam, but, as far as I know, it cannot be used with multicard reader directly, but perhaps with Memory Stick adapter. Please consult the manuals s document and you will find the list of all supported cards.

  To be honest I have Memory stick adapter but A200/P200 still doesn't properly recognize the card.

  So the question is: do you also use the adapter or not?

• Strange problem with ODD on Satellite A300

  I have a TOSHIBA SATELLITE A300-1EC, since a few days.

  Whenever I try to open a DVD or CD in the DVD drive, the disc is ejected.
  Please let me know the possible reasons. I have to approach the seller for repair because it is covered by the warranty or is der the possible ways I can try myself to use the CD / DVD-ROM, I mean as in checking the drivers etc.*

  Best regards Mathew

  Maybe you should offer the best explanation.

  Which player do you use?
  What happens when you put the DVD movie in the DVD player and close it?
  Usually, you should get the option to choose the player and after you click OK and film should start.
  You have any problem with original CD music and DVD movies or perhaps some self-made media?

• Problem with 4965AGN on Satellite A200/R01

  I have a Satellite A200/R01 under Vista Ultimate, with an Intel 4965AGN card. Until recently, my wireless worked fine, but now the toolbar at the bottom left shows;

  Connection status: unknown
  The dependency service or group could not start

  If I right-click and "connect to network", it will connect always (very slowly), but still shows the connection status: unknown.

  The wireless still works, but not correctly, which is a pain. I tried reinstalling the drivers, and it did not help. Any thoughts on things to try is appreciated.

  You have installed SP1?

• Strange problem with LAN on Satellite P10 connection

  Since yesterday I get really annoying balloon popup (it appears at intervals a decade or less seconds:(qui dit: câble débranché, mais le réseau fonctionne très bien (avec quelques retards quand il montre)))
  I wonder is this a hardware in my laptop problem or a problem with the internet provider. I have Realtek RTL8139/810 x LAN card. I checked another cable and of the ToolTip always shows :(
  Help, please

  Post edited by: motomadness

  Hello Adam

  On this path, it is not easy to say anything. I recommend you test somewhere else to make sure if this problem occurs due to material.

• Strange problem with RAM on Satellite Pro A100

  I have a Satellite Pro A100 (not sure which...)
  It came with 2x256mb RAM, which are mounted. I noticed my laptop slow, so I checked what he says on the properties of the workstation - who said RAM 192Mo...

  Any idea what's going on?
  I had a peek inside, both are mounted securely, while the right push entirely? There is a small gap (about 1 / 2mm) so that is the little nick and real editing. -What is the cause? Or it's maybe faulty?

  Please help me!
  Thanks in advance,

  Diana

  According to the description of your problem, I guess one of the memory modules is not recognized by the system and the specified result 192 MB of Ram only tell me that your laptop has shared graphics memory card.

  Satellite Pro A100 is fairly new to laptop and, in my opinion, you should contact service. The guarantee must be valid and if everything is defective it will be replaced free of charge.

  If possible, tell us what Satellite Pro, you have exactly. This info you can find on the lower side of your laptop.

• Strange problem with touchpad on Satellite L500-19Z

  I have an older one month by Satellite L500-19Z running on Windows 7 64 bit.
  While using it to edit photos, he began to behave strangely. It was as if someone was quickly down the left button of the mouse. I have been unable to leave any program or use the Start Menu to restart.

  After turning off the power supply and the battery, I started it in Mode without failure, but the problem was still there. If I flew over any icon that he raised the window several times. By disabling the touchpad through Fn + F9, I was able to use a graphics tablet to re - start and it works normally. I hesitate to use the recovery of the system or the recovery disks that I created when I bought it because of the number of third party programs that I would lose.

  Everyone knows the problem please? What should I do to activate the touchpad see if it works fine now?
  Thank you very much

  Hello

  Can you turn the touchpad by pressing FN + F9 as usual?

  In your case I would also update the driver for the touchpad. You can download it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If an external mouse works but the touchpad is still problems, I think that you need to use the Toshiba Recovery disk to restore to factory settings. After that, you have the same settings as on the first day where you bought the laptop.

• Strange problem with display on Satellite M70-200

  I have Toshiba Satellite M70-200.

  When I turn once is not display and once it appears for a few seconds and he return not display anything and not finish this early...

  Help me please.

  Sorry, but I'm not sure I understand you.
  Can you explain more what what exactly?

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

• Strange problem with HP OfficeJet 6500 709n

  I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

  The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

  No idea why this is happening and how to fix it?  Thank you.

  This problem of not being able to scan only started after upgrade to Windows 8?

  If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

  To uninstall the software, follow these steps:

  1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
  2. click or tap the name of your HP printer, and then click or tap on uninstall.
  3. follow the on-screen instructions to uninstall the software.

  After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

  Driver and HP Officejet Full Feature software

  Install this version of the software and try to scan now!

  Let me know if it works for you, good luck!

  -Kyle

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Strange problem with BT Headset!

  Hello

  I have a very strange problem with BT headset.  My Z3 is model of official unlocked Docomo of SO - 01 G.  I got PlayStation Voxtube 500 BT headset BT version is THE 4.0.  This headset has been used with Nexus 5 (Android 5.1.1) without any problem and the battery last almost a week to stanby with a few minute talk time per day.  However, after not getting Z3 with Android 4.4.4, pairing with Voxtube has no problem.  Then, the battery is discharged within 4-5 hours stanby.  I tested it for 3 or 4 times, it has come down to that there must be something worng with the battery of the headset.

  So, I got with PlayStation representative claim (it is only a few months old).  Surprisingly, representative of PlayStation has all the test suggested no stanby time problem with their phones iPhone 5 or Sumsung Galaxy S5.  Then I took back recharged so its performance is very short wait duration the same as before.  So, I tested it with my iPad Mini 3 and performance return to normal standby time.

  So, it can be concluded for only problem is with the Z3. But once again with the mating with the other headset BT Jabra Tag2, stanby time is within the normal range (4-5 days).  When that happens?  I am very confused. Should I give up on PlayStation?

  Thank you for your time,

  Simply upgrade to 5.0.2 lolipop and hope this will help me on this issue.

• Strange problem with HorizontalFieldManager - it does not show on real device bitmap

  I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

  The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

  Here's what I see on Simulator and some devices

  

  Here's what I see on the real blackberry:

  

  Code:

  ......

  OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

  The solution is to extend the RadioButtonField field and replace the positioning method:

  RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

  SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

  public RadioButtonHack() {}
  Super();
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected, long style) {}
  Super (label, group, selected, style);
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected) {}
  Super (label, selected group);
  }

  public RadioButtonHack (label As String) {}
  Super (label);
  }

  Protected Sub layout (int width, int height) {}
  int temp = this.getPreferredWidth ();
  setExtent (time, height);
  Super.Layout (time, height);
  }

  }

  resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...

• Strange problem with ASDM

  Hi, today we had a strange problem with one of our 5550. I worked through ASDM on it and all of a sudden I couldn't connect via asdm on the interface of management or inside interface. Nothing helps.

  When I connected with a vpn, then use asdm, it works. My ip on the network when it did not work was 1xx.xxx.81.235. When I use the vpn is a 1xx.xxx.55.1 from a different ip address. I can build a connection on the inside interface with asdm (with vpn).

  I tried closed and without stop the interface of man, that does not.

  It may be that the things asa, I am an intruder and dynamically blocks my netwerk range? If yes where can I find this info.

  Other users of our team had the same problem.

  I also checked the syslog nothing.

  THX,

  Marc

  Although I've ever experienced this myself, but if the running-config has not changed and worked before its possible that the ASA

  may have shunned your connection?

  To the CLI:

  # sh shun

  look if your IP address is present, if any make:

  # claire shun

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/protect.html#wp1058270

  More than likely it is do to a change to the running configuration, I would start by looking at a previously working with the gift of running-config running-config.