FireSight Managment

Similar Questions

• Firesight Management Virtual Center in ESXi version 6

  Hi all

  Is it possible to install any version of virtual appliance Firesight Management Center of vmware ESXi 6?.

  Thanks and greetings

  I have not tried it personally - it may be possible to install.

  However ESXi 6.x is not a supported platform yet. Even with the power of fire (new name for FireSIGHT) recently published Management Center 6.0, the supported versions of ESXi are 5.1 and 5.5.

  The source of this information is the Release Notes:

  http://www.Cisco.com/c/en/us/support/Security/Defense-Center/products-re...

• The traffic load between the power of Cisco ASA and FireSight Management Center fire

  Hi all

  I have a stupid question to ask.

  Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

  Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

  Maybe you all have no idea to provide.

  It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

  Generally it is not a heavy load, however.

• TIME BASED ACLS ON FIRESIGHT MANAGER

  Dear all,

  We use the power of fire management center Cisco for VMWare. In which we have created several rules under strategies--> access control. But we want to run some rules under the defined time interval. Can anyone please help on this configuration.

  screenshot is attached.

  Thank you very much.

  Raja,

  Sorry, but this feature is not currently available.

• Virtual Firesight Management Center (Sourcefire_3D_Device_Virtual64_VMware - 5.3.0 - 571) inaccessible via the web page

  Hi, I installed Sourcefire_3D_Device_Virtual64_VMware - 5.3.0 - 571 on vmware ESXi 5.0, installation was ok, I can ping and ssh Sourcefire_3D access but I am not able to access via Internet Explorer or Firefox.

  I see with wireshark who receive the Sourcefire_3D package from the client browser, but is not full 3 - way handshake.

  I use my laptop with Windows 7 64-bit, with vmware workstation v. 10.0.4 and ESXi 5.0.0.

  any suggestion?

  concerning

  Antonio

  You are welcome.

  Please take a moment to assess your question as answered.

  See you soon!

• Power of fire vs NGIPS vs FireSight vs power of fire management center

  I am struggling to understand the distinction between these terms. Is anyone able to help me understand what are the components?

  Firepower is the term that Cisco uses during most of the acquis of Sourcefire products.

  FMC

  Power of fire aka Firesight Management Center aka Defense Center Management Center.
  Power of fire management centre was re-branded twice, its all the same

  Centralized management for devices of firepower (NGIPS, Module of ASA firepower, DFT)

  NGIPS

  Dedicated appliance IPS / IPS component of the solution of firepower (also used on the firepower of ASA and DFT module)

  ASA with power of Fire Services

  ASA with module of software/hardware that is running the services of firepower. (is two different images running on the same box. Traffic is redirected to the module of firepower for Layer 7 inspection)

  FTD

  Power of fire Threat Defense is the new unified combining image Software ASA and firepower into a single image. (not full parity of features to ASA still)

  If you need more let me know.

• Cisco Firesight time management center

  Hello

  Is it possible to change the time on Cisco Firesight Management Center after that I'm done with the initial configuration. I need to change the time zone again as it has been set to an incorrect value, and I can't find an option to do so.  We manage the system on an ESXi and I can access the CLI console as well

  Kind regards

  IT is defined by the user (top right of the CMF GUI)) > user preferences > time zone preference.

• FireSIGHT Eval License Management Center

  Y at - it licensed Eval of 60 days for the FireSIGHT Management Center? If so someone has the link to it so I can get one for my client? Thank you.

  If you are a partner, you can follow evidence security of value (POV) available on the security clearance process partner community.

  See the next page of the procedure:

  https://communities.Cisco.com/docs/doc-55301

  (Not a public or oriented customers link - access level partner required)

• Management of FireSight, is it really necessary

  Hi team - I propose two 5525 with services of firepower.  Question is, do I really need to order Firesight Manager?  Can't be done the same with ASSISTANT Deputy Ministers.  The implementation of work without the accustomed Firesight Manager.

  B

  I agree with Philip to get the 5516 vs 5525 but would also like to add a few things:

  1 ASDM can handle firepower on all the X series firewalls. It was introduced along with ASA version 9.5 and 7.5 ASDM:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASDM/7_5/release/notes/RN75.html

  2. it is strongly recommended that you get FireSIGHT. FireSIGHT you perform the discovery network, recommendations of the IPS, to correlate events, generate reports, set alerts, etc. The IMO FirePOWOR without FireSIGHT isn't a good solution.

  I hope this helps!

  Thank you for evaluating useful messages!

• Is there a centralized management for fire muiltiple ASA?

  Hi all

  I had a bit of google but cannot find anything. We are an MSP and manage the ASA firewall for several clients. We seek to deploy firepower on ASA5500x models for customers with the VMware virtual appliance for management firepower to customers locally.

  Is there a way to centrally monitor multiple firepower installs? We have alerts email for events of the intrusion, but looking for something a little more fancy for a view of AC type.

  Maintenance rules and air we would always use installation for a more detailed analysis and local would look us at the interface of local firepower.

  Thank you, Simon

  There is not a 'Manager of managers' for several FireSIGHT management centres (new name for the old centre of defence).

  Of course a particular CMF can manage multiple sensors / modules ASA firepower but a given sensor or module cannot be managed by a single WCF.

• Power of fire management Centre HA Configuration

  This is probably a really simple answer but...

  I have two physical FS2000 aircraft - both have been upgraded to V6.

  What I want to do is to run in an HA pair.

  I find a lot of documentation for V5.4 on how to proceed (essentially go to the system > Local > record) but this does not seem to exist on V6.

  How do I in version 6?

  Thank you

  Giles

  Hello team,

  Is this a new installation?

  If yes you can reimage the FMC to any version of 5.4.1.x.

  http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...

  Concerning

  jetsy

• Policies of firepower on ASA local after adding to the FireSIGHT Center of Mgmt

  Are the settings and policies of an ASA local with shattered fire or power of substitution to the addition of the device that will be managed by the management center of FireSIGHT? I have an ASA that works stand-alone with FP and now need to add FireSIGHT Defense Center/Management Center without losing existing policies.

  Thank you.

  Simply adding as successful will not overwrite the local policies of the firepower of the ASA module gave.

  However, as soon as you deploy any policy (access control, Intrusion, file), healthcare etc. Since FireSIGHT Management Center it will overwrite the one on the SAA.

  You can export one local by using the ASDM Manager and then import it into FireSIGHT for re-deployment as a management centrallly policy.

• FireSight DC change

  Feature: FireSight management running the version 6.0.1

  If another user connects to the management of the graphic interface and does a change as the disabling of an interface, or recommendations of firepower or police, but don't push politics or not fully applied the changes. Is there a place where I can connect and see what changes when it is or has yet to be pushed or applied?

  It seems that we can see if it's different places if you know look but no notification of status in one place.

  Hello

  You can go to system-> monitor-> Audit and check if you see the audit logs. It will not be detailed, but will let you know the target pages of navigation by the user and the called sybsystem.

  If you want to track if the device is up to date, click deploy. If there are any devices that must be deployed, they will fill there. You will see an icon "+" to see the details of what is not pushed to the device.

  Guillaume

• Power of fire time SYN with Firesight

  Dear,

  My fire power is not synchronized with system for time firesight, firesight is synchronized with an ntp server but firepower is not synchronized, how I can set the clock/NTP in firepower.as I know initial installation, we get an option ntp but now the power of fire is already set up and I get no CLI option to configure NTP

  Thank you

  Adam,

  Allow you to control the 99% of a module of firepower (on SAA) Management Center of firepower (new name for FireSIGHT Management Center for the defence of AKA) or stand-alone unit does, including the definition of the NTP server.

  As indicated in the document, create or modify a strategy of firepower to define time synchronization settings. Save it and deploy it to your devices and they will be updated with this policy.

  See the following screenshot of the example (open in a new tab to zoom in):

  Policy setting Module of firepower to NTP

  

• device without a permit in firesight

  Hi all.

  I have a deployed Firesight management VM. I have installation ASA 5515 X 2 with it successfully. When I went to add another today, I applied my licenses in the license tab and when I go to them to join the new ASA, the boxes are grayed out and it remains unlicensed. How can I do to solve this?

  1.PNG

  

  2 png

  

  3 png

  

  You cannot add a second license 2-unit to a management center of FireSIGHT 2 - existing device. Licenses are not additive.

  It must be replaced by a 10-device license add additional devices. (or deployed as a separate VM management)