strange programs that I have installed on my PC

Similar Questions

• Windows Defender Software Explorer to allow a program that I have disabled.

  I was able to use the Windows Defender Software Explorer to DISABLE a startup program.  The program was DELL QUICKSET.  Now I would like to REACTIVATE the same program, but when I select, all three buttons, DISABLE, ENABLE, and REMOVE stay gray.

  I have the same program for the 4 other programs that I have disabled grayed out, I select and buttons are still grayed out, although earlier, I was able to use the same method to disable gthem.

  You cannot use Autoruns to disable programs, just control those who start or do not start at startup (if they were added by the program, or Vista).  I don't know why Software Explorer does not activate the ptorgrams - should be because this is the program that the disabled.  Maybe it's an update or some type of permissions (or problem of corruption in the program that cannot be uninstalled or re-installed on Vista without a Vista in its entirety.

  We will try this.  Go to C:\Program Data\ Microsoft\Windows Defender\Software off Explorers\ items in the startup folder.  Check the list for the item you want to activate (it should be here as disabled).  Try to delete or otherwise remove this item from the folder.  If necessary, try to right click on the element, and then click Run as administrator (if this option is available).  If not, right-click on the item and click Properties, then security and give you all the rights and ownership (you will have to do it for the folder itself, or perhaps even its parent folder as well or as high as necessary to obtain permissions and ownership).

  If this does not work, try to use one of the following free products to remove the file...  Unlocker to:http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.

  If this does not work, try to uninstall the program and reinstall again (if you have the software or you can get it from the manufacturer's web site)., Dell is good enough to make available software downloads.

  If this does not work, try Windows Defender Discussion Group at:http://www.microsoft.com/athome/security/spyware/software/newsgroups/reader/default.mspx?dg=microsoft.private.security.spyware.general&lang=en&cr=US&r=33d293cc-19b6-404b-865b-565a73822c7f where experts advocate may be able to solve your problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• given that I have installed 9.3.1 IOS wifi signal is weak or lost.

  given that I have installed 9.3.1 IOS wifi signal is weak or lost. I have an IPhone 6 64 GB. Help, please!

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• "Screening... a more recent version of alchemy that you have installed, so it cannot be loaded."

  version 10.01.0, Capitan OSX, when I take a few synths, garageband said 'the preset you are trying to load has been created with a newer version of alchemy that you have installed, so it may not be supported.', I uninstalled and installed again, but nothing does not change.

  Did you just install an update to Logic Pro x?

  I'm having the same problem.  It took place directly after you have installed the update Logic Pro X. Some of the sounds that garageband share with logic and MainStage now require an update of Alchemy.

  The GarageBand 10.1 application package contains a local copy of the Alchemy framework. If you control GarageBand 10.1-click and select to display the contents of the package, you will see:

  /Applications/GarageBand.app/Contents/frameworks/MAAlchemy.Framework/versions/A/ MAAlchemy

  The frame is from June 6,2015.

  The framework in Logic Pro X

  / Applications/Logic Pro X.app/Contents/Frameworks/MAAlchemy.framework/Versions/A/MAAlchemy

  has a more recent date: January 19, 2016

  

  Need an update for GarageBand 10.1 with the new version of Alchemy.

  Plan to use the feedback form to send a bug report, so we'll see a GarageBand 10 update as soon as possible.

  Apple - Mac-Feedback: GarageBand

• Computer to read DVD - one message says that I can not read the DVD, except that I have installed a new driver.

  I have a new Toshiba C650 laptop, and he says that I can not read the dvd on it except that I have installed a new driver. Is this true?

  Hi Bill,

  To be honest, this sounds ridiculous but if you get a message, I suppose it could be possible even if I find it incredible.  Do you have it in a (local or online) retail store or Toshiba?  By any chance did you upgrade from the DVD player when buying (where they may have accidentally neglected to update the drivers of the drive that was originally installed)?

  As it is new, Toshiba should help you with this.  Here's the contact page: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/navShell.jsp?cf=su_contact&pf=true.  Give them everything they need to prove that buy you it and it should be under warranty and then give them the message Word for Word, that you have found.  They should be able to help you.  They can, for some reason I don't know, you don't need to help or guide you through a new driver installation.  I ask for a clear explanation of why this is necessary on a new computer and, if you are not satisfied with the response, ask them to consider that all the faulty computer and replace it.  Even if they won't, he needs the get them less motivated to solve your problem.

  I hope this helps.

  Good luck!

• Can I sell my windows 7 home basic to others that I have installed and activated?

  I bought windows 7 Home Basic SP. 1. I sell my windows 7 home basic to others that I have installed and activated?

  I want to buy the new windows and I used the update because I want a simple process. The upgrade procedure needs more, not simple.

  Can the buyer install it and activate it to his computer?

  You say you have this:

  "Home Basic 7 Sp 1 64-Bit English 1PK DSP OEI DVD 611 SEA"

  Did you read this part?

  These versions are for small integrators (DSP = 'partners in enforcement service'), which usually contain a single Windows (1pk = 32-bit or 64-bit, not both as in commercial versions) and an OEM preinstallation kit to preconfigure Windows and/or integrate additional tools (OEI = 'Installation of Original equipment' or 'Integration organizational environment'). They have the same limitations that versions OEM = license is tied to the computer where the operating system has been installed initially and not transferable in case of death of the machine.

  If you want to move or to sell the license of operating system or upgrade motherboards in a computer, buy a license at retail in the future.

  See you soon.

• How can I change a default opener for a program that is not installed

  I want to open a. File Extension GBA with Visual Boy Advance that is not installed on my PC because it comes as a whole.

  Thanks in advance!

  "How can I change an opener by default for a program that is not installed"

  You can not, the program must be installed

• I was wondering if I bought a monthly subscription that I could cancel and still use the Lightroom program 5 I have installed

  I already bought and installed 5 Lightroom a year ago. However on the Adobe website they offer 5 Lightroom and Photoshop CC as a package of $9.00. I was wondering if I bought the monthly subscription, if I could cancel and always use Lightroom 5 program I have installed if I decide to cancel.

  [Title edited by moderator]

  Hi Patrick,

  At any time if you decide to cancel the subscription of creative cloud (plan $9.99), you will always be able to use the Lightroom 5 stand-alone program that you purchased.

  But with creative cloud subscription, you get a free upgrade to Lightroom to the current version which is Lightroom CC/6. If you upgrade your Lightroom CC catalog with the subscription and then, you wouldn't be able to downgrade this to Lightroom 5 catalog later.

  Let us know if you need additional assistance.

• Optional update listed for a program that is not installed

  OS: Windows 7 Home Premium 64-bit - current (clean install on the new machine)

  AV: Blink Personal - current (eEye Digital Security) doubt that there is a problem

  Whenever I receive a notice on an update for Windows 7, there is always an optional update for Windows Live Essentials - except that I have not installed Windows Live Essentials.

  How can I fix it so update does not include an unnecessary update?

  Never seen an update listed for a program not installed before on 7 window

  No action taken - do not know how to stop it - the download screen allows no options ignore or hide an optional update that I see.

  Hello

  Windows Live Essentials is a collection of free programs include Windows Live Photo Gallery, Windows Live Movie Maker, Windows Live Mail
  and Windows Live Messenger.

  You can check this link for more information:
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-Live-Essentials.aspx

  You can hide this update in Windows Update.

  1. open Windows Update.
  2. in Windows Update, select the Windows Live Essentials.
  3. right click and select "Hide update".
  4 leave the action when prompted by User Account Control.

  You can also check this link:
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - How to allow a user access to the computer at a program that has been installed as a local user

  I have a professional Windows 7 operating system and have a program that was installed when the user is logged on as a local user.  Is it possible to give the same user rights to run this program without having to reinstall the program when the user is connected to the domain?

  Thanks for any help you can provide.

  Microsoft Answers is for consumers to related issues and it would be preferable for you to post in the following TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Sincerely,

  Marilyn

• Windows 7 will not recognize that I have installed the driver for my MICROSOFT xbox wireless gaming receiver

  Hello
  first of all, let me say thanks for reading this e-mail message. I have a problem with windows 7 64 bit recognizing that I have a driver installed on my compuetr, I installed the tha tcame with the cd software and that did not work, it appears as an unknown device in devices and printers, I tried to download the driver for windows 7 64 bit on the microsoft site after uninstalling CD. then I have insalled Traore, one on the microsoft site and it says the same thing, I can't then turned to devices and printers and he said that this device does not a driver installed. I tried so many times with the same results. I restored the system time ind time new and re-installed windows 7 two times and still the same problem, I've done alll I can again and again until im just sitting at the computer that I'm beyond angry, now just totally lost it please can you help as I think I've tried everything

  Thank you for the hope

  creepyz

  Hi creepyz,

  Please see things to try when the game Microsoft Xbox wireless receiver is not detected in Windows PC.

  1. check that the accessory is an accessory wireless Xbox 360 officially licensed.

  2. examine or replace the batteries to make sure that you loaded the batteries of the accessory wireless Xbox 360.

  3. move the receiver away from other devices that may interfere with the communication between the receiver and the accessory wireless Xbox 360 Wireless.

  4. Note: devices such as wireless routers, phones wireless and microwave ovens can generate Wireless interference.

  5. If the light on the receiver does not light, check the USB connection between the receiver and your computer. Make sure that the receiver is connected to a powered USB 2.0 port.

  6. If you use a wireless keyboard or mouse, disconnect the keyboard or the mouse, then reconnect the wireless gaming receiver. Then try reconnecting your device wireless Xbox 360 to the PC.

  See please visit the link below which deals with this subject.

  http://support.Xbox.com/support/en/us/Xbox360/KB.aspx?ID=933709&lcid=1033&category=hardware

  Please check How to configure and use your Xbox 360 Wireless Gaming receiver for Windows, for more help, check out the following links below.

  ·         http://support.Xbox.com/support/en/us/NXE/contactus.aspx Support for Xbox

  ·         http://forums.Xbox.com/ Forums

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I opened my options "Customize notifications", why it displays icons for the programs that I have more?

  I accidentally downloaded this stupid iLivid.exe I deleted right away, but there is still an option to show/hide notifications from it. The same goes for an avp.exe (Kapersky security) program. How can I get rid of these?

  Thank you guys
  p.s. If any of you guys know too, when I connect to this Web site, once I typed in my account information to connect, I always refresh the page so that it can actually connect, any ideas?

  Hi NickFrankel,

  Depending on the program that you always see and how you have uninstalled it will depend on why he always shows up there.

  For Kaspersky in particular, there are known issues when you try to uninstall, I would suggest so go their link below about their removal tool:

  http://support.Kaspersky.com/FAQ/?QID=208279463

  I hope this helps!

• I have a macbook pro that you have installed Silverlight for tv/movie through Amazon prime and it does not work... It used to work before - someone ' one knows why?

  I have a MacBook Pro and have installed Silverlight to watch TV / movies on Amazon, but it does not work... I uninstalled and reinstalled but still no luck. He previously worked, so not sure as to why it does not work. Does anyone know a solution to this? I have searched and tried several options...

  Thank you!

  Click on safari, security, preferences and settings of plug-in, then turn on plug in bright silver.  has worked for me