Strange sieve grid requires the closing down.

Similar Questions

• the application was unable to start correctly (0xc0000142) Message window during the closing down, labeled cmd.exe.

  I have a problem that only occurs during the closing down. When I select Shut Down I soon get a pop up that says... the application could not start correctly (0xc0000142) click on OK to close the application. window label is cmd.exe. Whether I click on the window, closing down product and eventually after say 30 seconds the alarm disappears. clicking on the alert simply displays another alert. This only occurs during the closing down. Also, I have no problem to launch cmd.exe during the normal operation, or any other program running in the command window. I read a few posts but don't see anything exactly like this, what happens during closing down.

  Suggestions would be appreciated.  Eric

  Hello
   

  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

   

  For additional information see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/troubleshooting-problems-while-in-safe-mode
   

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• When I click on close downcomputer the hourglass appears on the desktop for more than a minute before the closing down of the icon is displayed

  When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions

  We need more information!

  Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):
  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Do you have the Windows Desktop Search installed issue?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  ___________________________________________________________

  Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.
  That (ElderL also) might help, too (because its results will contain many answers to the above questions):
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• After the closing down by Satellite P300-150 won't start

  I have a P300-150, he stops a day or use environment. I thought it was just a stop thermal protection to the bottom as I had it on all day watching DVDs / tv online. It wouldn't come right back so I let it cool for a while but he still won't return to the top. He tried battery and battery without result. I don't not even to the extent of the POST/BIOS.

  Anyone know the best course of action or other things to check? The PSU works as my multimeter sees a volt 19 - odd of her healthy.

  See you soon.

  Hello

  What happen exactly when you press the power button / stop?
  It goes of the computer laptop or not, I mean s power led or there is no reaction because all?

• You use the latest version, is it possible to keep an eye when closing down so that they automatically reload. Used to be able to do it on the earlier version?

  Would always have several tabs with the web when closing down addresses so that the same tabs are available when you restart as you could with the previous version, so firefox. Is there a setting somewhere?

  Record of the tabs was not removed from Firefox 4, but it works a little differently.

  • By default, Firefox 4 will not ask to save tabs, but instead it will always save your tabs on the output unless you're in private browsing mode. You can restore the next time by:
    1. by clicking on the Firefox button > history > "restore previous Session ', or
    2. type of Subject: House in the URL bar and press the Enter key, then press the button "restore previous Session."
  • Note: This was a decision by the developers. On this forum, we are all volunteers without compensation here to help other users. Develop them and employees of Mozilla/Firefox rarely, if ever visit here.

  To display the message "save tabs and exit" when closing multiple tabs, you can do the following:

  1. Type of topic: config in the URL/address bar and press the Enter key
  2. Accept the warning message (promise to be careful)
  3. Open the preferences/list page
  4. Filter = browser.tabs.warnOnClose
  5. If its value is set to false, double-click top (in the lower panel) to toggle its value to true
  6. Repeat steps 4 and 5 for the 3 following preferences also:
     • browser.warnOnQuit
     • browser.warnOnRestart
     • browser.showQuitWarning
       • Note: last pref is new in Firefox 4 b 12, may need to add (boolean)
       • Info/instructions for the use of topic: config: http://kb.mozillazine.org/About:config
  7. See:
     • https://support.Mozilla.com/en-us/questions/785169
     • http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2105039 & p = 10434467 & sid = fd2a35945bb2c633687f7b50d8c53989
     • http://blog.zpao.com/post/3174360617/about-that-quit-dialog

  Things to check if the tabs are not being saved to the output:

  1. Browsing history must be saved
     • Button Firefox: Firefox button > Options > Options > privacy > [X] Remember my browsing history
     • Menu bar: Tools > Options > privacy > [X] Remember my browsing history
  2. Also, make sure that you do not erase "Browsing history" when you use clear recent history or when Firefox is closed
     • Using clear recent history
       • Button Firefox: Firefox button > history > clear recent history
       • Menu bar: Tools > clear recent history
     • When Firefox is closed
       • Button Firefox: Firefox button > Options > Options > privacy (verified) > settings
       • Menu bar: Tools > Options > privacy (verified) > settings
       • See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
  3. Make sure that you are not in private browsing mode or in private browsing mode permanent:
     • See: https://support.mozilla.com/en-US/kb/Private%20Browsing
  4. If you have the Tab Mix Plus extension, and then clear the built-in session restore.

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Next-generation Java plug-in 1.6.0_24 for Mozilla browsers
  1. Check your plugin versions on one of the following links:
  • http://www.Mozilla.com/en-us/pluginCheck/
  • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
  • Note: plugin check page lacks information about all versions of the plugin
  • There are links to tests specific plugin available on this page:
    • http://KB.mozillazine.org/Testing_plugins
• Update the Java plugin to the latest version.
  • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
    • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
      
  • See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
  • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
  • Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
  • Java test: http://www.java.com/en/download/help/testvm.xml

• HP Pavilion G6 2252so closing down due to the high heat (fan was cleaned up)

  I'm trying to fix a G6 model due to heat issues. The laptop is about 1 year. From what I have read on the internet, it is mainly due to the accumulation of dust. I told the owner that this was not covered by the warranty and offered to help with the cleaning of the fan. I completely cleaned the fan (incl. Remove the fan cover) and change the thermal paste on the processor. The problem persists. With the Speccy program, I read time of departure. for CPU to 90 degrees celsius. It's very different when the laptop shuts down. Sometimes it happends fast, at other times, he can run for hours. Even if the processor is completely cold, you can stop even before windows starts correctly. I managed to see the temperatures over 150 degrees celsius which should be alarming high. Even 90 degrees seems VERY high to me. The air blown by the fan seems not hot. It is only moderately hot and adjusts it fan speed according to the temperature. He begins to rise from more than 100 degrees. 90 to 99 degrees it runs pretty slow.

  If I try to go into the BIOS, I have only seconds before the closed laptop.

  From my point of view, he owes me two temperature sensors not working not properly, or the manipulation of temperature sensors is misinterperet, or simply the cooling system which is default. I don't know how the cooling system. The seat has a cobber lead wires for the heater and the fan. The tube contains a fluid? The liquid could somehow have vapourised?

  Be warm and helping the owner canceled its guarantee, now that I've had the dismantled oidissement?

  I tried to havn't updated the BIOS, because I'm afraid I'm going to brick the laptop, if it goes out during the process.

  Where is the temperature sensor placed on the Board? Is the sencot'en CPU built in or is it place in over/under it?

  How can I help the owner more far.

  Best regards

  Frank

  @FrankH82

  Hello again. I had actually read what you have written, but included these pages although I knew you did a large part of him he was already comprehensive, but also a reference to the point in case there was something on the picture in one of the documents that you may have missed, as a task to clean. I also realized that the BIOS update has been in the process as well, but guess you wouldn't do that, according to your previous statement, and that's understandable. I have not updated the BIOS, either when the PC has tendency to overheat and stop in the process (and brick it).

  In addition, there is the part about hardware failure analyses. From what you describe, it seems to me that the fan does not work as it should and is the likely source of the problem. If the unit is running too hot that you mention and the outgoing air flow is not so hot then there isn't enough air stream passes through. If instead it turns out to be a sensor problem, which is most likely going to require a replacement of the Commission.

  I have included the Service of Guide so that you can see how disassemble the unit safely if something had been missed in your household, and also, so you should have access to the parts list, if it turns out that the material is the source of the problem, since it includes the reference numbers for various sections that are replaceable by the customer including the fan and the heat sink (, motherboard, etc.) I have also included in part to answer your question on heat sensors that you request that are not listed as replaceable parts by the discreet.

  With respect to the copper pipes, they are units normally sealed with a small amount of distilled water inside at less than the normal pressure to reduce the boiling point of water, sort of way, it is meant to vaporize to help dissipate the heat. The only reason why the liquid inside would be gone is if the seal in the hose is damaged. If this is the case then it should be replaced.

  Now at this point, other than hardware problems as possible, as the system of cooling or the motherboard, which might need replacement, you can also look at the possibility of a cooling plate to increase the airflow. I myself for one of my laptops that I have left my son to use. He was very helpful while working in a warmer room in summer. It could be a quick thing to try so to make reliable unit until the likely hardware problem is resolved.

  Finally if you don't find that it is the material that needs to be replaced you should try calling the technical support to the 800-474-6836 line. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

• Loading the main page halfway when Firefox starts - all other elements as the bar side and toolbars is loading properly. Height adjustment manually retains the setting for navigation all in session but don't remember setting when closing down.

  Height adjustment manually retains the setting for navigation all in session but does not remember to reset when closing down.
  Something was clicked inadvertently, but don't know what or how as Firefox worked fine a couple of days. Version 3.6.3. Help please

  Positions and sizes of windows are stored in localstore.rdf in the profile folder.

  Localstore.RDF to remove or rename the localstore.rdf.sav file in the profile folder to test whether the file is corrupted.
  
  See http://kb.mozillazine.org/Corrupt_localstore.rdf
  
  (attention: do not delete the localstore.rdf file in the Firefox program installation folder)

  Note:
  
  Delete the localstore.rdf file will reset the default toolbar customizations.
  
  You can rename "localstore.rdf' to 'localstore.rdf.sav' to test whether what it solves.
  
  Then, you can restore the customization by copying "localstore.rdf.sav" to "localstore.rdf" if she did not.

• Microsoft Money - when closing down, it saves ok but there is a message saying that the operation cannot be completed. I then use the Task Manager to complete.

  I use Money version 1105, 2004 updated.  I have 2 qusstions-

  1. in closing down, it saves ok but there is a message saying that the operation cannot be completed.  I then use the Task Manager to complete.

  2. is there a version of Money that runs this file?  I tried Sunset but does not recognize my file.

  Any help would be great, thanks in advance

  Eric

  For any question on any version of Microsoft Money, ask http://social.microsoft.com/Forums/en/money/threads.

  Make sure your data and Money backup files are in Documents or another non-protected area, not the default money Program Files or changes and updates will not be saved.

  Unless you are in the USA, the version of Money 2005 (released in 2004) 14.0.120.1105 is the latest available. Sunset silver bed only U.S. data files.

  Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available at http://www.microsoft.com/download/en/details.aspx?id=26922

  Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915

• How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

  How can I fix the error "searchfilterhost.exe" which keeps closing down of my computer?

  SearchFilterHost.exe is part of Windows Search. However, it is Malware which can pass searchfilterhost.exe.
  I would like to start by downloading the free version of this tool. First check the updates and then run a full scan.
   
  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free 
   
   

• Defining form fields such as required based on the entry in the drop-down list

  I'm trying to set the properties of a few form fields as required in the case of a specific value is selected from a drop-down list.

  I entered the code of the tab actions from the drop-down list properties below > mouse down > run a java script. The problem is that it works only if I come out and enter again the drop-down list. "I tried to invoke the code with"Mouse down","Mouse entry", out of the mouse ' none of them worked unless I go out and again the drop-down list.

  Any suggestions?

  Thank you!

  var devused is this.getField ("device");.

  var comptype is this.getField ("Type of complaint");.

  var proname = this.getField ("product name");

  var feels = this.getField ("sent to the sponsor");

  If (comptype.value == 'Associated Product complaint') {}

  devused. Required = true;

  proname. Required = true;

  smells. Required = true;

  }

  else {}

  devused. Required = false;

  proname. Required = false;

  smells. Required = false;

  }

  What you describe is the way documented in what forms Acrobat and Acrobat JS behave by Form Event Processing

  For your described form, we can use a custom format for the field drop-down list script:

  If (event.willCommit! = true & event.changeEx! = "")
  {
  var devused = this.getField ("device");
  var proname = this.getField ("product name");
  Envoy of var = this.getField ("sent to the sponsor");
  Switch (Event.changeEx)
  {
  case "related product": complaint
  devused. Required = true;
  proname. Required = true;
  smells. Required = true;
  break; Go at the end of the switch;
  Repeat fdor each value of the option in the drop-down list.
  by default:
  If no match for the above cases, it is found;
  devused. Required = false;
  proname. Required = false;
  smells. Required = false;
  break;
  } / / end of switch event.changeEx;
  } / / end not true willCommit;

  You must set the ' Commit selected value immediately "and as one moves upwards or downwards the options, the related fields will change and stay together when you exit the field note that the field name is not used in the script because the field is the event object until it leaves the field.

• How to make the fields from the drop-down list required to make a selection before you save a PDF file

  I have a PDF form where I entered a JAVA script in some areas by using the option ON BLUR under 'Actions' and it works very well to prevent users to go to another site if they leave the field with the empty JAVA Script in place.

  My question is that I have other form fields that have a drop down menu where they can choose several options. I would also like to make these fields to where they can't move forward on the form unless they choose an option in the list. However, because with the option in the list "choose a ' is a default option entered into the field (field is not empty), script JAVA of BLUR ON option I used in my empty fields does not work to block the user to move beyond the matter without selecting an option. They are able to save the form with all the drop down menus staying to 'pick '.

  I made the field "Required fields" then they are highlighted with the red area around, but is there another tool to force them to choose an option for each in the drop down menus before you save the form, instead of being able to save with leaving the 'choose One' in the field by default?

  The best way to do this without knowing the default value of the field is to compare the value of the field to the default value of the field... You must make sure that your default value is not part of the possible acceptable answer. It works with most of the field types that a user can fill.

  If (event.value! = event.defaultValue) {}

  do something;

  App.Alert ("required field not completed. \nField name: "+ event.target.name, 1, 0);

  }

• I need to rearrange the order of the 'required securities' at the top of the drop-down list bookmark.

  Hi, useful friends Firefox,.

  I need help to reorganize my combo of bookmarks to make things run in the way that I like. I am former fighter user of Firefox (and Mozilla/Composer etc. way back when). I use Firefox 42.0 on openSUSE 13.2. These two are completely up to date. I'm a fan of Firefox, which is the only browser that I use on my laptop.

  My question is about how to prefix some unwanted with "ZZZ -" titles to make sure they appear only at the bottom of the drop-down list of bookmarks, rather than at the top. The problem is that these six tracks only appear on the list box dropdown bookmarks when I press < Alt > + < B >. They do not appear in the window "library / all bookmarks" in a way I can modify them to insert the prefix. The six titles that I want to move to a more appropriate (and less prominent) space in the list are:
  View all bookmarks
  Bookmark this page
  Subscribe to this page
  To bookmark all tabs
  Bookmarks toolbar
  Download bookmark modules

  I won't be taken away entirely optional. That's why I wish they were downstairs. I just want to get them out of sight, since I was a very organized hierarchy within my bookmark system. I always use strikes, never the pointer clicks, allowing access to my favorites. Those with six in my view area when I opened my favorites to get some desired that URL seems unnecessary. By placing a prefix ZZZ - in front of them, they in alphabetical index would be at the bottom of the list, rather than at the top.

  I would like any ideas you have to help me move these six titles.

  Thank you

  Dave

  Those are the elements that appear in the list by default.
  You can try to give them a higher value of - moz-box-ordinal-group to reorder the items and move them down.
  All items have to - moz-box-ordinal-group: 1 by default.
  You can set the number to set a specific order of each of the elements.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #bookmarksToolbarFolderMenu,#bookmarksMenuItemsSeparator {-moz-box-ordinal-group:10}
  #bookmarksShowAll, #organizeBookmarksSeparator {-moz-box-ordinal-group:15}
  
  #menu_bookmarkThisPage,
  #subscribeToPageMenuitem,
  #menu_bookmarkAllTabs {-moz-box-ordinal-group:11}
  
  #menu_unsortedBookmarks {}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  See also *.

  • DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/
  • https://developer.Mozilla.org/DOM_Inspector
  • https://developer.Mozilla.org/Introduction_to_DOM_Inspector

• PCIe NIC is always on even during the closing to the down/standby mode

  Original title: network PCIe card is still on ie. the led is on after shut down/sleep mode

  How to achieve in WIN7 64 Office that a PCIe card/device network is always on it is to say. the conduit was on even after the stop down / start-up mode "Eve" ? I disconnected in control panel/Device Manager menu power saving / PCIe, but it has not solved the problem.

  Hello Greg,.

  Thanks for posting your query in Microsoft Community Forum.

  The issue may be due to several reasons. I'll be happy to help you with your query.

  I first suggest you run the network troubleshooter to verify.

  Refer to: using the troubleshooter from network in Windows 7

  You can try to update the driver and check...

  Follow the steps.

  a. click Spie.

  b. type Device Manager in the search box.

  c. develop the network card

  d. right-click on the device, and then click Update (Realtek pcie card).

  You too, try to install the latest driver from the computer manufacturer's website.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Verification of the text field problem and requiring an option in the drop-down field

  I have a form with several fields that if the user enters information in one or more of the

  fields, I need to check that the drop-down list field is not empty.

  I got this to work, but now I find that if the user deletes the text in the text field, the user always receives the error message. Here is the script I use:

  If

  ((form1.page1.ListFilesFolders.rawValue) ! = null & & (form1.page1.windsNtwkAccess.rawValue) == null);

  {

  xfa.host.setFocus (form1.page1.windsNtwkAccess);

  xfa.host.messageBox ("Please make a selection in the field of Windows network."

  , 'Need to selection' , 1 , 0);

  }

  Thank you

  MDawn

  Makes sense... the field is null when the user deletes the text. You could put a white in these areas as default values and test for this instead of null. Now, when the user empty field, it will be null and will not empty so that the message will not appear.

  Make sense?

  Paul

• Automatic module in the drop-down list

  Is is possible to make a drop-down list to add a new element of list, every time someone entered something that is not already in the list?

  Thank you

  Josh

  • The script adds a "custom" name The names following the original crash. Is it possible to have the ability to add an unlimited number of additional items to the drop-down list?

  OK and I think v1.1 solves this problem. Testing, sorry, more tests can prove me wrong. The array must be initialized in the body of a function, otherwise, it gets recreated in each call to the script object. So I created a form (aka the global variable) variable to contain the initial data. With each release, event, I added a call to a function called checkData() that validates the entered value (either selected in the drop-down list or a custom text entry) does not exist.

  I am adding new values to the form variable and recreate the table of the form variable. This works very well for this use case, but I would discourage that adopting a form with several drop-down lists and/or a lot of data related to each dropdpown. You should really use data binding and put the processing on the server.

  Form1.Page1.Subform1.Dropdown1::exit - (JavaScript, client)

  If (! form1.page1.subform1.dropdown1.isNull) {}
  var str = form1.page1.subform1.dropdown1.rawValue;
  If (isNaN (str)) {}
  populateDropDowns.checkData (this);
  Form1.Page1.Subform1.dropdown2.clearItems ();
  Form1.Page1.Subform1.dropdown2.execInitialize ();
  }
  }

  Form1. #variables [0] .populateDropDowns - (JavaScript, client)

  stooge of var = new Array();

  function loadData (dropdownField) {}
  tenure = createArray();
  for (var i = 0; i)< stooge.length;="" i++)="">
  dropdownField.addItem (stooge [i]);
  }
  }

  function checkData (dropdownField) {}
  tenure = createArray();
  Check that the value is not in the table
  If (stooge.lastIndexOf (dropdownField.rawValue) ==-1) {}
  addData (dropdownField);
  }
  }

  function addData (dropdownField) {}
  var stoogeStr_ = stoogeStr.value;
  Check that the value is not in the global variable
  If (stoogeStr_.search(/dropdownField.rawValue/) ==-1) {}
  stoogeStr.value = stoogeStr.value + ', ' + dropdownField.rawValue;
  tenure = createArray();
  stooge.push (dropdownField.RawValue);
  dropdownField.clearItems ();
  loadData (dropdownField);
  }
  }

  function createArray() {}
  var stoogeStr_ = stoogeStr.value;
  tenure = stoogeStr_.split(",");
  return of foil;
  }

  • Because the initialization event again fills the drop-down list with the default Larry, Curly, Moe, the drop-down list loses 'tailor-made' entries on the reopening of the PDF file. Is there a way to save the final drop-down list, so that the options are there when the file is saved, closed and reopened its doors?

  This really requires a server solution or a rights compatible form that allows client-side XML import/export.

  Steve