After the closing down by Satellite P300-150 won't start

Similar Questions

• After the driver to install Satellite U205/S5044 won't start black plus-ecran

  Yesterday I installed drivers for my U205/S5044 and after restart, the screen black.
  When I press any key, I've heard say only a PEEEPPPP.

  Hi Mc

  Can you please post some more details?
  For example what driver you updated or install?

  Are you sure you used the writing and the compatible driver?

• Satellite P300-156 won't start or by MAIL

  Hello

  I have a Satellite P300-156 I bought a few months as damaged. The screen has been damaged and the case slightly cracked. I replaced the screen and hard drive and main card seems to have no physical damage. I've been running this system for 3 months now without any problem but, today, for some reason, it won't start or even POST. It powers on and the CPU fan starts to turn then stops and does nothing. No display (I tried external). CD player works. No beeps.

  I tried reinstalling RAM even open completely and reinstalling all connections, nothing done. Does anyone have an idea what component is gone? (CPU/GPU/RAM)

  Any help would be greatly appreciated

  Thank you

  Did you update the BIOS or something?
  For me, this is a normal behavior when the BIOS chip is faulty.

• HP Pavilion DM4-3105tx: HP Pavilion DM4-3105tx after the upgrade to 1 TB HARD drive won't start not and cannot get into the bios

  Hi all, just need help on my portable DM4 after replace 1TBHDD and unable to start and enter the bios.

  Help, please.

  Thank you & appreciated

  

• Satellite P300-150: Boot xp-vista & only 3 GB of memory with the xp

  Hello

  I have a Satellite P300-150 and I have two problems:

  (1) I install XP in my second partition and I can't boot to vista, I can start only for XP

  (2) I have install Windows XP Pro SP2, but Windows only shows 3 GB

  Thank you
  Fotis

  Hello

  > 1) I install XP in my second partition and I can't boot to vista, I can start only for XP
  The problem is known to me I installed the XP too on my laptop and after installing XP, I was not able to start the Vista because XP destroyed the Vista boot Manger!

  If you need now a Microsoft Vista DVD original (not Toshiba DVD recovery) and you should boot from the Vista DVD. This allows to repair the Vista Boot Manager.
  Then, you will be able to boot into the Vista operating system. Then, install the free tool called EasyBCD.
  This tool allows you to change the Vista Boot Manager and add the XP operating system to the Boot Manager.

  (> 2) I install Windows XP Pro SP2, but Windows only shows 3 GB
  I guess that your XP is a 32 bit OS and so he can see only 3.2 GB due to the limitation of the 32 bit OS.
  More details you can find on the Microsoft page

  Good bye

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• How can I configure the keys easy to work with iTunes on Satellite P300-150?

  I have a Satellite P300-150. The easy (the illuminated keys above the keyboard) keys work fine when iTunes is in the foreground, but I want them to work when I minimized iTunes or switch to another window. I found the "TOSHIBA button Support" utility help within TOSHIBA, but it only allows me to set it up as the "Enlightenment" and "CD/DVD" [drive] (the two left most) easy keys make...

  Any ideas please?

  Thank you.

  I doubt that this is possible
  I m using the WinAmp instead of Windows Media Player and the CD/DVD button works with Winamp. I want to say I can run Winamp by pressing this button, but I can't use the game, break, buttons forward in WinAmp.
  I think that it is not possible also with ITunes I've never tested, but it seems that it s not configurable.

  See you soon

• What can be done to improve the performance of the Satellite P300-150

  Hello

  I have laptop Satellite P300-150.
  It seems powerful enough but struggles with some of the latest games.
  It s not my main but game machine I m aware if he's struggling now, it won t well before he won t be able to run at all.

  And I wouldn't be able to play on the move...

  What can be done to increase the capabilities of the laptop - like tweaks, tools and upgrades?

  Thank you
  Max

  Hello

  You could improve memory to 4 GB of RAM.
  The laptop can be upgraded to 4 GB, but note that the Windows 32 bit OS (Vista & XP) will see only 3.2 GB due to the limitation of the 32 bit OS.
  In this case, you must use the 64 bit OS to get full access to 4 GB.

  Second, you can configure laptops OS. I mean you could start the msconfig and might turn off some background process is not necessary including the performance of laptops of waste.

  Unfortunately, other upgrades are not possible (apart from HARD drive, but will not increase performance)

  See you soon

• Installation of drive HARD recovery does not start on Satellite P300-150

  I have a 2008 Satellite P300-150 I want to restore factory settings.

  I followed the steps described in the manual of s to do it from the hard disk (F8 at startup), however, when I try, a screen will appear with a warning with the topic box"system recovery options"then below says "cannot start the installed program. Click ok to turn off the computer.

  I don't know m which is better to do it now if someone could suggest another way to do this, I would be very grateful.

  Thank you

  The situation is quite simple to explain. Recovery image installation can be done on two tracks:
  -using the HARD drive recovery or
  -using the create recovery DVDs.

  I put t know if you created this disk after advice from Toshiba, but if you use for the installation of operating system.

  By the way: Satellite P300 works perfectly with Win7 32 bit, so if there is a way to install do. It works much better than original Vista.

  If you have any other questions you are welcome. ;)

• Satellite P300-150 - cannot use a USB

  Hello

  I have a satellite p300-150 with Windows XP PRO SP2 and I can't use any USB key (I can't open) but I can use e.g. USB mouse.

  Thank you
  Fotis

  Hello!

  You can format the USB on the laptop, and you can see it in disk management?
  Do you have the yellow marks in Device Manager?

  This shouldn't be a problem with the USB ports, I think that the USB have some errors.

  Good bye

• Satellite P300-150 - impossible to record all sounds

  Hello, someone has an idea why it is not possible to record all the sounds (for example with the Audacity software)? -Other classes of water-recorder do not work too...

  Demand for Win "SndVol32.exe" shows that as a result of input sources: Mic and Line in French - output, it is shown SW-Synth., wave, CD player and Master Volume. -In the case of P300, Mic is in fact only to the webcam mode. On my old P20-852, here I could record the flow of the web and for expl WMP 10. and sometimes I use it for the soundtrack of the synthesizers installed.

  I have de - and reinstalled the rather (Conexant August 2008 version) and a newer version of SndVol32.exe... I tried with a new installation of XP on a 2nd partition program... same result. What's the reason, because I have a modification nLite XP Pro SP3? -My laptop is a Satellite P300-150 /PSPC4E

  Sorry, I have not analyzed all the discussions for an answer to my probs.

  Sincere friendships of Chris

  Normally it should not be a problem to record sounds with a installed and modified Windows XP with nLite.

  But have you tried to install the laptop with the recovery disk? Try this!
  The recovery disk contains all the drivers and tools to use all functions on the laptop and it should work.

• the application was unable to start correctly (0xc0000142) Message window during the closing down, labeled cmd.exe.

  I have a problem that only occurs during the closing down. When I select Shut Down I soon get a pop up that says... the application could not start correctly (0xc0000142) click on OK to close the application. window label is cmd.exe. Whether I click on the window, closing down product and eventually after say 30 seconds the alarm disappears. clicking on the alert simply displays another alert. This only occurs during the closing down. Also, I have no problem to launch cmd.exe during the normal operation, or any other program running in the command window. I read a few posts but don't see anything exactly like this, what happens during closing down.

  Suggestions would be appreciated.  Eric

  Hello
   

  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

   

  For additional information see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/troubleshooting-problems-while-in-safe-mode
   

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• the zoom browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  # zoom the browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  I haven't seen good eye.

  Install the extension to Default FullZoom Level and set a default zoom level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

• ENVY of HP dv7 w / Win 8.1 freezes after the closing and re-opening of lid

  Computer: HP dv7 ENVY

  Processor: Intel Core i7-3820 QM 2.7 GHz

  OS: Windows 8.1

  Graphics Card & Driver: NVIDIA GeForce GT 650 M (worm 331.82)

  Since the passage of Win 8.0 to 8.1, my laptop does not respond to the new entry after the closing and reopening of the cover.  As an attempt to circumvent the problem, in Control Panel (Control Panel > hardware and sound > Power Options > System Settings) I selected 'doing nothing' for preferences "when I close the lid.  After having opened the lid, tab browser fail to loa, windows cannot be enabled/disabled and CTRL-ALT-DEL gives no answer (preventing access to even the Task Manager).  The computer must be restarted to continue in force.

  This solution seems to have worked, even if I do not know why the four actions that were "resolved" by the resolution of the problems of power would cause the issue.

  Thank you!

• My computer seems often quite slow to startup or closing down. He often asks me to start repair!

  Original title: cannot start my computer.

  My computer seems often quite slow to startup or closing down. However, recently I have problems starting, it. He often asks me to start repair.  It is a common problem for Vista and how can it be solved?

  Hello

  ·         Have you tried repair system running on the computer?

  ·         Are you able to boot on Windows?

  ·         You get the error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps.

  Method 1:

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. I suggest you to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  Step 1:

   

  Check if you have the similar problem in Safe Mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2:

   

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

   

  Method 3:

  I suggest to follow the steps described in the article and check if this can help resolve the issue:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.