Strange things happens after installing 11.10.4 El Capitan.

Similar Questions

• Strange thing happening with ASA and RDP by filtered VPN

  Hello

  I'm hoping to get support here anymore as I am clearly out of options.

  I have 3 ASA 5505 2 and a 5510

  all of them are connected via the internet by VPN

  a 5505 is on my principles and I use VPN to serve 2 other sites that belong to the same customer. Clearly, I want to go the VPN will aswell to localities other than traffic from them.

  the strange thing is if I put an IP address a whole on the acl filter can I use RDP, for when I apply the filter, where I activate TCP/3389, I get an error that the server is not found.

  in forestry, I see the package hit the ACL:

  
  <167>:Jul 05 21:13:19 CEDT: %ASA-session-7-106102: access-list VPN_Filter permitted tcp for user '' User-Lan/192.168.1.87(58603) -> XS4ALL/172.31.2.12(3389) hit-cnt 1 first hit [0xbe2548e2, 0x0]
  <166>:Jul 05 21:13:19 CEDT: %ASA-session-6-302013: Built outbound TCP connection 43436 for XS4ALL:172.31.2.12/3389 (172.31.2.12/3389) to User-Lan:192.168.1.87/58603 (192.168.1.87/58603)
  
  VPN filter:
  access-list VPN_Filter extended permit ip any any log debugging inactive
  access-list VPN_Filter extended permit object RDP object-group DM_INLINE_NETWORK_8 object Lan-Pat
  access-list VPN_Filter extended permit udp object-group DM_INLINE_NETWORK_4 object Lan-Pat eq tftp
  access-list VPN_Filter extended permit icmp object-group DM_INLINE_NETWORK_1 object Lan-Pat log debugging
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_3 object Lan-Pat eq www
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_5 object Lan-Pat eq https
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_6 object Lan-Pat object-group DM_INLINE_TCP_1
  access-list VPN_Filter extended deny ip any any log debugging
  
  any help will be greatly appreciated!
  			 
  If do you a RDP from your PC to the client session, port TCP/3389 is used on the client side and not on your side. So your ACL should be the following:
  VPN_Filter list extended access permitted tcp 172.31.2.0 255.255.255.0 eq 3389 192.168.1.0 255.255.255.0
  Remember: in a VPN-filter is the syntax = remote destination, local = source. Port 3389 is on the remote end.
  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  
      http://www.Kiva.org/invitedBy/karsteni
  		   

• Admin account happened after installing the netgear Equium pc wireless card

  I bought a netgear pc wireless card that I was assured was compatible with XP. After installation, I got to start where the Welcome screen had gone and I have a black screen with a newspaper box in details request.

  As an administrator, I connected only to be told that I have no right of administration. I can only connect my using my account limited son. There is no account of the administration at all, I can not access my files or access the administration account not yet a guest account.

  Only a limited account is shown.

  Desperateto back in the system to remove the software, but this without icannot rights. admin tried pressing f8 safe mode, but it doesn't not work can not enter in save mode... on f12/f2 are leaving upwards. Tried to hide the password help... will not accept any of my contact information to
  all the

  Any help... Please

  Hello

  seems really strange, especially after the installation of a pc wireless card software. I can give you a suggestion:

  EVERYTHING YOU DATA BACK UP AND REINSTALL YOUR OPERATING SYSTEM.

  I think that it is the only way, because when you describe you already tried almost every thing, then a recovery is inevitable. Copy/backup your data and put the new OS on the HARD drive.

  After that, make separate accounts (for example 3 accounts) and install the card netgear with the admin account. It should work.
  Would appreciate some comments.

  Welcome them

• Strange things happening: opening on their own programs, mouse clicks things I click...

  I had some strange problems on my Windows Vista laptop. He just started acting today. This time, I tried all sorts of scans, cleanings, controls problem, but nothing helped.

  It is quite difficult to describe, but basically the computer seems to act as if the mouse is which is clicked when I even touch it not. Thus, for example, then I click on the start menu or right click to bring up a menu drop down, it flashes briefly upward but then disappears. Or I run an application, and a box pops up saying: 'Are you sure you want to close this program' when I have not pressed on what. In Excel, I try to type something in a cell, but before I finished typing the text disappears (exactly the same happens when I type an address in the web browser). Sometimes a window will close only on its own.

  This is not the case all the time and even when it happens that I can still do a lot of normal stuff on the computer. But once it flows in the it does not seem to worsen progressively. Then, when it becomes too much and I have to restart the computer once it has restarted, it starts to get really loud constant beep, and I have to press F8 a few times to stop the ringing and bring up this menu of options (safe mode, etc.).

  I'm not particularly computer literature and have exhausted all avenues, I know that to solve the problems. There is no reference to this problem in other messages of the forum here. Any help would be much appreciated.

  My laptop has a touchpad, but I use a wired mouse. (And Yes, I tried a different mouse, the problem persists)

  (P.S. not sure I posted this in the right part of the forum. Please let me know if I would be better to post elsewhere)

  Hi ComputerNerdDJMJ,

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  I suggest you follow the steps; It will help you solve the problem.

  Method 1: your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows?T1=tab05

  Method 3: Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow these recommended steps and post if you still experience the problem.

  Hope this information is useful.

• Strange thing happened when I tried an update of security of El Capitan

  Hello. Basically, I got a pop message yesterday saying ICloud could not connect with my Gmail account and then as I proceeded to update my disconnected iMac but would not open a session as a progress bar would not end. I have tried rebooting without success, then after another reboot I tried the command R - disk utility - first aid and everything was fine. Then a reinstall via the R command yet and the progress bar ran twice but could not complete the second run so I let him all night. I came back the next morning found he had not completed but got the same popup message iCloud I had before. Don't know what I exactly bar clicked on a few options, but the Desktop reappears then things work ok now. The only thing is that the update is not completed and I hesitate to do so scared that the same thing is happening again. Can someone please enlighten me as I have now two updates pending? Thank you

  Long time no see!

  Phew, what Mac is this? You use the Wifi or Ethernet?

  Have reset you the Modem/Router?

• Two strange things happened! v01, 01.22 A

  The new firmware worked fine until it started last night. I have listen to some FM and use the new Sleep function... It was the first time I had ever used the function Sleep when I loaded the firmware when it came out.  OK, I updated the time 60mins after about 40mins I decided to not let it closed so I reset the timer to _ or no time and moved to hear some MP3 and after a short time, maybe 10-15 minutes the player just * stop * down without reason. When I turned back I saw that he did not break itself as usual before you stop if it comes to start playback of the MP3 where she had stopped...  Strange!  What has caused this? Bug in the new firmware?

  Another problem is the list to go. I put 3 CD to the list go and started to play my play list, and he's on a break after that first CD has been made rather than continue with the rest of my list... Once again! I think that it is strange behavior, I checked my % battery left and I got 47 percent remained so power should never have a problem...  Any ideas? Thank you! George

  I just wanted to add that I was not doing something with the player. It was on my night stand when these two questions is here!

  Hi George.

  I vaguely remember something about your sleep timer problem that someone wrote on the right after the update. I think that is that after someone changed his mind about the sleep function, like you did, that he always operated in all the originally scheduled time even if they had canceled it. According to me, the workaround suggested was to turn it off, then restart the "rocket" to completely stop the form activation sleep timer.

  The question of the GoList you describe has not yet happened to me, but I used it only for the first days of time 3 or 4 it y a. I love the whole album 'Add' or 'complete artist' with a single button feature that we have now. But have an unexpected break as you describe not happened to me yet, so I'll cross my fingers and hope that it does not work. I hope it was just a case of the moat and this won't happen again!

• Strange things happening to the sepia images in Lr 4.3

  I am at my wits end and hope someone can help out me! I spent hours and hours with tech support Adobe to have a hard time to understand thick accents and not enough knowledge to understand the question. And my case was dropped because of schedules; I was busy with Thanksgiving that seemed to make no difference for the one who is not celebrating! But I digress...

  I don't really remember what happens in Lr 3.5, but it's in Lr 4.1 - 3 and the only effects Sepia toned images that I modify most of the time. Just finished about 200 images of an event where I'll put them on a DVD to music for the purchase. They all was going well when I'm done with them. I exported to JPEG, the side long 1024, quality 74. The rest of the short iMovie, long history made looks terrible, co-opted to iDVD. First time visualizing everything was good, but after several viewings after reorganization/add/remove images of the project, they look crap. For some very strange reason, many takes a pink/reddish color and often introduce artifacts that were simply not there in Lr I watched my images edited on 2 different Mac and the question remains, so not my computer.

  I have an iMac 27 ", OS 10.6.8 (completed to date), 3.3 GHz core duo, 12 GB RAM, 960 GB of free space on a 1 TB HARD drive. Warranty the display and the recalled hard drive have been replaced, so my 4.3 Lr is completely fresh; not from a backup. With the new recent HARD disk, I have not calibrated my computer at the moment. My images are on a WD 3TO with 1.25 TB of free space (a bit on the low side, but should not do anything). My camera is a Sony A33 and strictly I shoot in RAW to sRGB; using ProPhoto in Lr and for a while now that in the manual.

  I would be grateful if someone can explain why it is a problem. I need to finish with this DVD for the event, and if I can't understand this point, he has lost time and money! It is true that I did not this very long, so if this is something I am doing wrong, I would really like to know what that is...

  My examples:

  Screenshot of the image in the develop Module

  

  JPEG export (coloring/banding is obvious in the upper right)

  

  > I thought images looks the same whether in the library, develop or slide show, but this isn't the case for me.

  Library and slide show must be identical. Develop is a special case where you can sometimes see very subtle differences in hue to the library, but this does not sound subtle for me at all.

  > There is no a lot of images in this catalogue and to be honest, not sure a new catalogue will bring in the VC that I work out of. Can you tell me if it will be?

  The trick is to select the pictures (or its VCs) work and export a new catalog of this (file-> export of catalog). Be sure to deselect "export negative files ' and"(Inclure aperçus disponibles) '. " Then load the new catalog (you can just double click on it.) Previews will be re-created in this new catalogue.

• Very strange thing happening with Vista administrator/Standard username/password - please read!

  I have a serious problem, I was using a standard account for awhile until I decided to activate the Admin account, I have created a password for it BUT disabled then the password and when I used the Standard account and needed permission from Admin to do something in the standard, IT would BE STILL ASK me for PASSWORD BUT I did NOT NEED TO TYPE IT I just clicked OK and it went through

  The problem I have now is that I have disabled the administrator account from the command prompt (net user administrator / active: No.) to use only the standard, BUT NOW IT ALWAYS ASK me for THE ADMIN PASSWORD, BUT IT IS No. BOX to TYPE IT IN AND I can't USE a PROGRAM, I see a box with an "OK". I can't click or password I can't type in

  Now when I try to activate the administrator account with the user Standard order confirmation, it wont let me not allow him, so my Admin account is lost and I can't get Permission to do anything as a Standard user, I'm not a windows vista disc, I need advice on how to enable Admin account again Thank you.

  Hey, Vincenzo. If I read that post of the OP correctly the problem is not one of the password lost, but rather that he or she does not have a current administrative user on the system. It disabled the administrator built-in, but I forgot to make one administrative account, leaving only a user active Standard on the system.

  "DismalDaze" - try to go to Safe Mode. Although the built-in administrator is disabled, if there is no other administrative user on the system administrator can be activated in Mode without failure. Go in Safe Mode, press the F8 key as the computer starts. If you see an icon for administrator on the Welcome screen, connect to it and set up your users as recommended at the end of this post.

  If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled and you will need to work more. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third-party burning software such as Nero, Roxio or the free ImgBurn (www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  Now remove the rescue CD/DVD, you have done, reboot Windows and log on to the built-in Administrator account, you enabled. After you have created your additional administrative account by the recommendations below, log in there and disable the administrator built-in yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• When I combine 2 documents, strange things happen...

  Hello

  I reap what I have sown - I think because I do not have correct pages master issues a few weeks ago, I now suffer some strange mojo when I try to add what I'll call my PT document. 2 at the end of my document, PT. 1. I realized that, to maintain the differences in line 2, I simply add an extra page at the end of the document 1... that seemed to work.  But many pages of document 2, when I moved their end 1, text on them.  On other pages, which should be there are missing.

  I do something like select 'Replace all Master Page items' before to spend my document pages 2?

  Thanks a lot for any advice on this.

  Malcolm

  Question share entire P.S.: when I tried to backup (for Creative Cloud) my file which has all my photos and logos and any other thing in it, I learned that you cannot save records cc.  You can save only individual files.  Does this mean that I have to take all these individual files out of my fairly complex hierarchy of folders - all content in my big file 'Book project' - before I can download them?

  Who demolishes what is a very organized arrangement!

  OK, I think I solved the problem by getting rid my Master A of page elements in paper 1.  The pages I'm moving over document 2 were made using a page master B, and when they were moved, they got the master items A plastered on top.

  I think I'm now OK!

  Best regards, Malcolm

• Please help, strange thing happened with scsi

  OK, this can be confusing because it is to me. Here is what happened.

  My two hosts ESXI 1 (. 75) and esxi host 2. (81) where work very well (connecting to databases) (total 9)

  what I did try to install another physical server (the network) not vmware naked 2008 Server and connect to the same table (for the installer backup) then all of a sudden when I formatted one of my (UNUSED) of records in the table the esxi server 1 INTERRUPTION of the connection to this specfic table. ESXI host 2 has no trouble accessing and seeingboth of data stores. I tried reseting network management and even restart ESXI host 1. I am able to access VIA putty to get out of trouble. If I try to put scsi under static IP address I get an error below (please help it is a production server)

  both esxi servers

  Several links to troubleshooting iSCSI.

  http://www.Vladan.fr/how-to-troubleshoot-iSCSI-connection-to-your-San/

  http://KB.VMware.com/kb/1003952

  http://KB.VMware.com/kb/1003681

• A strange thing happens at disposal when inserting {tag_blogpostbodypreview, read more}

  I used this tag often {tag_blogpostbodypreview, read more}, but in a recent update to an old site replace {tag_blogpostbody} {tag_blogpostbodypreview, read more} forces the "sidebar" DIV to slide under the list of Post and not to the right, as if this tag has a clear: both or block style.

  I have made sure nothing else causes this and find that by replacing those tag between them on the layout of message list page breaks the layout of the blog altogether

  Here's the catch, it happens on the 'home page' list of Blog, but not when you view the details of the message or when you go to the page #2 in the list of Blog view

  See homepage here

  http://www.peptalks.me/PEP-talks-blog

  See here a Post of details and Page 2 of the list

  http://www.peptalks.me/PEP-talks-blog/page/2/

  http://www.peptalks.me/PEP-talks-blog/familiar_foods_upgraded_is_gooooood

  For the life of this one I can't understand why this is happening.

  Any idea would be interesting a cocktail on me.

  
  Mouma

  Yes quite strange. {tag_blogpostbodypreview} pull content directly from the blog, formatting and where all the as {tag_blogpostbody, 400, read more} only pulls the characters, so I wonder if there is a misplaced div or tag somewhere in your first set of blog posts which causes which. That would explain why it only appears on the first page and not others.

• A strange thing happens when I try to send a message from Outlook Express

  Whenever I try to send a message from Outlook Express to my Yahoo email account, the dialog box will move immediately to the status bar.  Is not that bad, but it seems too far on the right side of the screen, and I right-click on the status bar to maximize.  Any ideas on why this is happening?

  Can click you the title bar when it is on the right side and then move it to the left (try also the arrows).  If you can move it and then close it, then it should open in the center of the next time.

  Steve

• Strange thing happens by adding the phone number

  Hi all

  I'm tring to add a phone number of the phone book.

  However, my application brings original request for telephone directory of the instrument. This is the normal behavior?

  I want to add in silence, and another thing is that when I click on trackweel on objectChoiceField, it brings also the device [honebook application.

  I used the trackwheelClick() action.

      public boolean trackwheelClick(int status, int time)
      {
          Contact contact=null;
          int type=0;
          Field leafField =  this.getLeafFieldWithFocus();
          try
          {
              BlackBerryContactList contactList =
                  (BlackBerryContactList)BlackBerryPIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
              PIMItem pimItem = contactList.choose();
              contact = (BlackBerryContact)pimItem;
  
          } catch (PIMException e)
          {
  
          }
          if (leafField == okBttn)
          {
              contact.addString(Contact.NAME_FAMILY, BlackBerryContact.NAME_FAMILY, givenName.getText());
              contact.addString(Contact.NAME_GIVEN, BlackBerryContact.NAME_GIVEN, familyName.getText());
              if (pChoice.getSelectedIndex()==0)
                  type = BlackBerryContact.ATTR_MOBILE;
              else if(pChoice.getSelectedIndex()==1)
                  type = BlackBerryContact.ATTR_WORK;
              else if(pChoice.getSelectedIndex()==2)
                  type = BlackBerryContact.ATTR_HOME;
              contact.addString(Contact.TEL,type, areaCode.getText() + phoneNum.getText());
              try
              {
                  contact.commit();
              } catch (PIMException e)
              {
  
              }
          }
          return false;
      }
  

  Please help me solve this problem.

  Thank you

  DK

  Please refer to the example here:

  How to-AddressBook access contacts
  Article number: DB-00147

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800363/How_To _...

• Strange things happening

  Executes the function below gives:

  Current date-> Sat Jul 11 01:35:36 GMT + 0200 2009
  Due date-> 1 Thu Jan 15:53:40 GMT + 0200 2009
  Days of delay-> 41

  The days of delay are NO 41 (January 15, 2009 to July 11,2009).

  What I am doing wrong?

  Function overDueBy(dueDate:Date):String {}

  var millisecondsPerDay:int = 1000 * 60 * 60 24;

  
  var: milliseconds: uint = ((nouveau_Date()).getTime () - dueDate.getTime (());

  
  trace ("today's date-->" + new Date());

  
  trace ("Due date-->" + dueDate);

  
  trace ("days of delay-->" + Math.round (milliseconds / (millisecondsPerDay)));

  }

  use:

  function overDueBy(dueDate:Date):String {}

  var millisecondsPerDay:int = 1000 * 60 * 60 24;

  milliseconds var:number= ((nouveau_Date()).getTime () - dueDate.getTime (());

  trace ("current date-->" + new Date());

  trace ("expiry date of--->" + dueDate);

  trace ("days late-->" + Math.round (milliseconds / (millisecondsPerDay)));

  }

• need help, there is a strange thing to pix!

  the diagram please see www.ciscofan.com/smbc.jpg

  now the router of the ebs has a NM-1CE1U & NM-30DM, then remote clients can dial in to the network, the router of the pboc has a wic - 2T module, connect to the remote site via ebs DDN.the ip address of the pix interface is x.x.45.2, the ebs, the ip address of the ethernet router is x.x.45.1, and the ip address of the remote client can get (the pool of ip addresses) is the ip address x.x.45.110-x.x.45.140.the of pix515E inside the interface is x.x.44.1.I using nat 0 0 0 to avoid any nat (image the pix as the router) then the strange thing happens, after configuration, router ebs, can not ping any address which is like x.x.44.x, after x.x.45.1 ping server1, then both dialer clients and the ebs router can ping Server1, but cannot ping server2, after x.x.45.1 (router ebs) ping server2 , the two Dialer clinets and ebs the router can average ping server2, etc.that computers inside must ping computers outside first, then the external computers can access (include ping) inside is server.and the thing even stanger, if there is any traffic between ebs and the remote client (or the router of the ebs) in some time (maybe a few hours, but I'm not sure) remote dialer clients or ebs router cannot ping (access) inside

  Servers.for instance, after one night, in the morning, customers remote dialer or ebs router cannot ping x.x.44.x.It seems there is a configuration of Time out, but how can I set it up?

  What follows is the pix (515e) configuration:

  PIX Version 6.1 (4)

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 security10 intf2

  nameif ethernet3 intf3 security15

  nameif ethernet4 ebs security20

  nameif ethernet5 pboc security25

  activate n5vL encrypted password

  passwd 2KFQnencrypted

  pixfirewall hostname

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 1720

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  names of

  pager lines 24

  Automatic stop of interface ethernet0

  Auto interface ethernet1

  Automatic stop of interface ethernet2

  Automatic stop of interface ethernet3

  Auto interface ethernet4

  Auto ethernet5 interface

  Outside 1500 MTU

  Within 1500 MTU

  intf2 MTU 1500

  intf3 MTU 1500

  MTU 1500 ebs

  PBoC MTU 1500

  external IP 127.0.0.1 address 255.0.0.0

  IP address x.x.44.1 255.255.255.0 inside

  IP address intf2 129.0.0.1 255.255.255.0

  intf3 IP address 127.0.0.1 255.255.255.255

  IP address ebs x.x.. 45.2 255.255.255.0

  IP address x.x.46.2 255.255.255.0 pboc

  alarm action IP verification of information

  alarm action attack IP audit

  no failover

  failover timeout 0:00:00

  failover poll 15

  failover outside 0.0.0.0 ip address

  IP Failover inside 0.0.0.0

  failover ip address 0.0.0.0 intf3

  failover ip address 0.0.0.0 ebs

  failover ip address 0.0.0.0 pboc

  history of PDM activate

  ARP timeout 14400

  NAT (inside) 0 0.0.0.0 0.0.0.0 0 0

  allow icmp a conduit

  allow ip a conduit

  Route the pboc 10.24.15.0 255.255.255.0 x.x.46.1 1

  Timeout xlate 03:00

  Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR

  p 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  No sysopt route dnat

  You have no static command to create the static translation slots. Thus, you need outbound to create temporary translation locations, but these are not permanent, you will have problems.

  public static x.x.44.0 (Interior, exterior) x.x.44.0 netmask 255.255.255.0

  You must bring happiness