Please help, strange thing happened with scsi

Similar Questions

• Strange thing happening with ASA and RDP by filtered VPN

  Hello

  I'm hoping to get support here anymore as I am clearly out of options.

  I have 3 ASA 5505 2 and a 5510

  all of them are connected via the internet by VPN

  a 5505 is on my principles and I use VPN to serve 2 other sites that belong to the same customer. Clearly, I want to go the VPN will aswell to localities other than traffic from them.

  the strange thing is if I put an IP address a whole on the acl filter can I use RDP, for when I apply the filter, where I activate TCP/3389, I get an error that the server is not found.

  in forestry, I see the package hit the ACL:

  
  <167>:Jul 05 21:13:19 CEDT: %ASA-session-7-106102: access-list VPN_Filter permitted tcp for user '' User-Lan/192.168.1.87(58603) -> XS4ALL/172.31.2.12(3389) hit-cnt 1 first hit [0xbe2548e2, 0x0]
  <166>:Jul 05 21:13:19 CEDT: %ASA-session-6-302013: Built outbound TCP connection 43436 for XS4ALL:172.31.2.12/3389 (172.31.2.12/3389) to User-Lan:192.168.1.87/58603 (192.168.1.87/58603)
  
  VPN filter:
  access-list VPN_Filter extended permit ip any any log debugging inactive
  access-list VPN_Filter extended permit object RDP object-group DM_INLINE_NETWORK_8 object Lan-Pat
  access-list VPN_Filter extended permit udp object-group DM_INLINE_NETWORK_4 object Lan-Pat eq tftp
  access-list VPN_Filter extended permit icmp object-group DM_INLINE_NETWORK_1 object Lan-Pat log debugging
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_3 object Lan-Pat eq www
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_5 object Lan-Pat eq https
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_6 object Lan-Pat object-group DM_INLINE_TCP_1
  access-list VPN_Filter extended deny ip any any log debugging
  
  any help will be greatly appreciated!
  			 
  If do you a RDP from your PC to the client session, port TCP/3389 is used on the client side and not on your side. So your ACL should be the following:
  VPN_Filter list extended access permitted tcp 172.31.2.0 255.255.255.0 eq 3389 192.168.1.0 255.255.255.0
  Remember: in a VPN-filter is the syntax = remote destination, local = source. Port 3389 is on the remote end.
  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  
      http://www.Kiva.org/invitedBy/karsteni
  		   

• Very strange thing happening with Vista administrator/Standard username/password - please read!

  I have a serious problem, I was using a standard account for awhile until I decided to activate the Admin account, I have created a password for it BUT disabled then the password and when I used the Standard account and needed permission from Admin to do something in the standard, IT would BE STILL ASK me for PASSWORD BUT I did NOT NEED TO TYPE IT I just clicked OK and it went through

  The problem I have now is that I have disabled the administrator account from the command prompt (net user administrator / active: No.) to use only the standard, BUT NOW IT ALWAYS ASK me for THE ADMIN PASSWORD, BUT IT IS No. BOX to TYPE IT IN AND I can't USE a PROGRAM, I see a box with an "OK". I can't click or password I can't type in

  Now when I try to activate the administrator account with the user Standard order confirmation, it wont let me not allow him, so my Admin account is lost and I can't get Permission to do anything as a Standard user, I'm not a windows vista disc, I need advice on how to enable Admin account again Thank you.

  Hey, Vincenzo. If I read that post of the OP correctly the problem is not one of the password lost, but rather that he or she does not have a current administrative user on the system. It disabled the administrator built-in, but I forgot to make one administrative account, leaving only a user active Standard on the system.

  "DismalDaze" - try to go to Safe Mode. Although the built-in administrator is disabled, if there is no other administrative user on the system administrator can be activated in Mode without failure. Go in Safe Mode, press the F8 key as the computer starts. If you see an icon for administrator on the Welcome screen, connect to it and set up your users as recommended at the end of this post.

  If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled and you will need to work more. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third-party burning software such as Nero, Roxio or the free ImgBurn (www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  Now remove the rescue CD/DVD, you have done, reboot Windows and log on to the built-in Administrator account, you enabled. After you have created your additional administrative account by the recommendations below, log in there and disable the administrator built-in yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• A week ago, I bought a subscription to CC in Adobe Photoshop and Lightroom. I can access Photoshop but this screen still ask me for the license number or if I want to continue with the trial. The same thing happens with Lightroom, only he mak

  A week ago, I bought a subscription to CC in Adobe Photoshop and Lightroom. I can access Photoshop but this screen still ask me for the license number or if I want to continue with the trial. The same thing happens with Lightroom, only it makes me sign and taking me in the tutorials. I can't access the actual program. Help!

  Ask the serial number http://forums.adobe.com/thread/1234635 has a link to FAQ

• Strange thing happens by adding the phone number

  Hi all

  I'm tring to add a phone number of the phone book.

  However, my application brings original request for telephone directory of the instrument. This is the normal behavior?

  I want to add in silence, and another thing is that when I click on trackweel on objectChoiceField, it brings also the device [honebook application.

  I used the trackwheelClick() action.

      public boolean trackwheelClick(int status, int time)
      {
          Contact contact=null;
          int type=0;
          Field leafField =  this.getLeafFieldWithFocus();
          try
          {
              BlackBerryContactList contactList =
                  (BlackBerryContactList)BlackBerryPIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
              PIMItem pimItem = contactList.choose();
              contact = (BlackBerryContact)pimItem;
  
          } catch (PIMException e)
          {
  
          }
          if (leafField == okBttn)
          {
              contact.addString(Contact.NAME_FAMILY, BlackBerryContact.NAME_FAMILY, givenName.getText());
              contact.addString(Contact.NAME_GIVEN, BlackBerryContact.NAME_GIVEN, familyName.getText());
              if (pChoice.getSelectedIndex()==0)
                  type = BlackBerryContact.ATTR_MOBILE;
              else if(pChoice.getSelectedIndex()==1)
                  type = BlackBerryContact.ATTR_WORK;
              else if(pChoice.getSelectedIndex()==2)
                  type = BlackBerryContact.ATTR_HOME;
              contact.addString(Contact.TEL,type, areaCode.getText() + phoneNum.getText());
              try
              {
                  contact.commit();
              } catch (PIMException e)
              {
  
              }
          }
          return false;
      }
  

  Please help me solve this problem.

  Thank you

  DK

  Please refer to the example here:

  How to-AddressBook access contacts
  Article number: DB-00147

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800363/How_To _...

• When I try to load a photo CD, nothing happens at all. The same thing happens with the help of CD audio.

  I put my CD in the drive and the only thing that happens is some sound then nothing. The CDs are not load as they did.

  Hello

  Next message will be on automatic/AutoRun reading where it is also a question AFTER you do these:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Strange things happening: opening on their own programs, mouse clicks things I click...

  I had some strange problems on my Windows Vista laptop. He just started acting today. This time, I tried all sorts of scans, cleanings, controls problem, but nothing helped.

  It is quite difficult to describe, but basically the computer seems to act as if the mouse is which is clicked when I even touch it not. Thus, for example, then I click on the start menu or right click to bring up a menu drop down, it flashes briefly upward but then disappears. Or I run an application, and a box pops up saying: 'Are you sure you want to close this program' when I have not pressed on what. In Excel, I try to type something in a cell, but before I finished typing the text disappears (exactly the same happens when I type an address in the web browser). Sometimes a window will close only on its own.

  This is not the case all the time and even when it happens that I can still do a lot of normal stuff on the computer. But once it flows in the it does not seem to worsen progressively. Then, when it becomes too much and I have to restart the computer once it has restarted, it starts to get really loud constant beep, and I have to press F8 a few times to stop the ringing and bring up this menu of options (safe mode, etc.).

  I'm not particularly computer literature and have exhausted all avenues, I know that to solve the problems. There is no reference to this problem in other messages of the forum here. Any help would be much appreciated.

  My laptop has a touchpad, but I use a wired mouse. (And Yes, I tried a different mouse, the problem persists)

  (P.S. not sure I posted this in the right part of the forum. Please let me know if I would be better to post elsewhere)

  Hi ComputerNerdDJMJ,

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  I suggest you follow the steps; It will help you solve the problem.

  Method 1: your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows?T1=tab05

  Method 3: Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow these recommended steps and post if you still experience the problem.

  Hope this information is useful.

• Strange thing happened when I tried an update of security of El Capitan

  Hello. Basically, I got a pop message yesterday saying ICloud could not connect with my Gmail account and then as I proceeded to update my disconnected iMac but would not open a session as a progress bar would not end. I have tried rebooting without success, then after another reboot I tried the command R - disk utility - first aid and everything was fine. Then a reinstall via the R command yet and the progress bar ran twice but could not complete the second run so I let him all night. I came back the next morning found he had not completed but got the same popup message iCloud I had before. Don't know what I exactly bar clicked on a few options, but the Desktop reappears then things work ok now. The only thing is that the update is not completed and I hesitate to do so scared that the same thing is happening again. Can someone please enlighten me as I have now two updates pending? Thank you

  Long time no see!

  Phew, what Mac is this? You use the Wifi or Ethernet?

  Have reset you the Modem/Router?

• BlackBerry smartphones with new "BOLD" - desperate Please HELP restore historical Email with BES

  Hi all

  This is my first post. I'd appreciate any help that anyone can provide. I use a BB 8800 GSM for 2 years and was just delivered a new BB Bold 9000 GSM. I use it mainly to work with our email of the company, as well as for the address book and shared agendas. My company uses Exchange 2003 and Blackberry Enterprise Server, which I can only guess is 4.0 or 4.1. I am

  As I said, I use the BB for work and like having my available historical email because I often need to find old emails when not in the office. I saved the 8800 using the SW Desktop Manager v4.6. I also did a switching device using the DM software, while both devices were connected to my laptop via USB. He successfully restored data on the "BOLD". However on the "BOLD" I can't send or receive e-mails with my work email. I can make calls, send text, browse the web, send email from my Yahoo account which is also configured with the BB.

  I also connected to Blackberry Internet service page and updated my device on the wireless network and updated the maintenance book. This helped my account Yahoo work on the BB. However, I am still without corporate e-mail.

  My question is do I have my BES administrator to make a change on the BES? He needs to make an enterprise activation? If Yes is there a way to make the EA and always keep my historical data via Desktop Manager backup & restore process?

  If the BES administrator needs to do an environmental assessment can anyone provide detailed instructions so that I can help him or tell him in the right direction? He believes he needs to delete my account and create a new one. I was told it may need only to update or change the PIN associated with my profile.

  Any help or input would be appreciated especially experiences BES administrators. If you need more information or have any questions please fire away.

  Thanks in advance!

  You connect the BlackBerry to your work PC when you have used the device switch Wizard? If so you are invited to implement using PIN code (in bold) of the new device, and then generate a new encryption key? If yes then which should have completed the activation process to activate the "BOLD".

  If this does not happen your IT Department can issue you a new password to activate. After they do that you just have to go into Options | Advanced options | Enterprise activation and enter your corporate email address and the password, they give you, click your menu button, then choose activate. This will activate the "BOLD" to receive your business data.

• Strange things happening to the sepia images in Lr 4.3

  I am at my wits end and hope someone can help out me! I spent hours and hours with tech support Adobe to have a hard time to understand thick accents and not enough knowledge to understand the question. And my case was dropped because of schedules; I was busy with Thanksgiving that seemed to make no difference for the one who is not celebrating! But I digress...

  I don't really remember what happens in Lr 3.5, but it's in Lr 4.1 - 3 and the only effects Sepia toned images that I modify most of the time. Just finished about 200 images of an event where I'll put them on a DVD to music for the purchase. They all was going well when I'm done with them. I exported to JPEG, the side long 1024, quality 74. The rest of the short iMovie, long history made looks terrible, co-opted to iDVD. First time visualizing everything was good, but after several viewings after reorganization/add/remove images of the project, they look crap. For some very strange reason, many takes a pink/reddish color and often introduce artifacts that were simply not there in Lr I watched my images edited on 2 different Mac and the question remains, so not my computer.

  I have an iMac 27 ", OS 10.6.8 (completed to date), 3.3 GHz core duo, 12 GB RAM, 960 GB of free space on a 1 TB HARD drive. Warranty the display and the recalled hard drive have been replaced, so my 4.3 Lr is completely fresh; not from a backup. With the new recent HARD disk, I have not calibrated my computer at the moment. My images are on a WD 3TO with 1.25 TB of free space (a bit on the low side, but should not do anything). My camera is a Sony A33 and strictly I shoot in RAW to sRGB; using ProPhoto in Lr and for a while now that in the manual.

  I would be grateful if someone can explain why it is a problem. I need to finish with this DVD for the event, and if I can't understand this point, he has lost time and money! It is true that I did not this very long, so if this is something I am doing wrong, I would really like to know what that is...

  My examples:

  Screenshot of the image in the develop Module

  

  JPEG export (coloring/banding is obvious in the upper right)

  

  > I thought images looks the same whether in the library, develop or slide show, but this isn't the case for me.

  Library and slide show must be identical. Develop is a special case where you can sometimes see very subtle differences in hue to the library, but this does not sound subtle for me at all.

  > There is no a lot of images in this catalogue and to be honest, not sure a new catalogue will bring in the VC that I work out of. Can you tell me if it will be?

  The trick is to select the pictures (or its VCs) work and export a new catalog of this (file-> export of catalog). Be sure to deselect "export negative files ' and"(Inclure aperçus disponibles) '. " Then load the new catalog (you can just double click on it.) Previews will be re-created in this new catalogue.

• Strange things happens after installing 11.10.4 El Capitan.

  Here is what happened on my mac after installing 11.10.4 about 32 hours ago.

  1. the mac has begun to run very slowly.  Rolls of almost every click.
     1. I give it some time to come because I think the new OS kind of learns his way around and will be exploited later more quickly.
  2. My reminders up and restored to a set of callbacks so that I was updating their previous and reminders that I had previously entered simply disappeared.
     1. all preferences indicating reminders would be updated to legacy via iCloud were selected.  However,...
     2. a day after the installation of 11.10.4 on my mac that reminders on my iPhone had not last updated with new reminders on my mac.  Maybe it's because new reminders were written before that I installed 11.10.4?
     3. I entered a new reminder on my iPhone at around 18:00 5/11
     4. At about 20:00, 5/11 I started working with reminders on my mac.  While I was doing if the older iPhone reminders has replaced the reminders on my mac, actually go back to a previous version.
     5. Maybe it's another example of 11.10.4 ' entering the stream?
  3. My email signatures came back to a previous series of signature after using a new signature for two days.  As reminders, the new signature disappeared.  Also, signature preferences came back to the default of not having a signature that is automatically included in every email.
     1. My new signature had been kept in my sent mails, so I did a simple copy/paste, choose the signature to use in the value of the email, and I'm back to where I was.

  Someone else, El Capitan upgrade problems?

  Please post a report of EtreCheck of your system. Please click on the link, download the app and then after the results of the report in your reply to this message. Then we can look for obvious problems.

  If you want to learn what is EtreCheck, just click the link.

• Two strange things happened! v01, 01.22 A

  The new firmware worked fine until it started last night. I have listen to some FM and use the new Sleep function... It was the first time I had ever used the function Sleep when I loaded the firmware when it came out.  OK, I updated the time 60mins after about 40mins I decided to not let it closed so I reset the timer to _ or no time and moved to hear some MP3 and after a short time, maybe 10-15 minutes the player just * stop * down without reason. When I turned back I saw that he did not break itself as usual before you stop if it comes to start playback of the MP3 where she had stopped...  Strange!  What has caused this? Bug in the new firmware?

  Another problem is the list to go. I put 3 CD to the list go and started to play my play list, and he's on a break after that first CD has been made rather than continue with the rest of my list... Once again! I think that it is strange behavior, I checked my % battery left and I got 47 percent remained so power should never have a problem...  Any ideas? Thank you! George

  I just wanted to add that I was not doing something with the player. It was on my night stand when these two questions is here!

  Hi George.

  I vaguely remember something about your sleep timer problem that someone wrote on the right after the update. I think that is that after someone changed his mind about the sleep function, like you did, that he always operated in all the originally scheduled time even if they had canceled it. According to me, the workaround suggested was to turn it off, then restart the "rocket" to completely stop the form activation sleep timer.

  The question of the GoList you describe has not yet happened to me, but I used it only for the first days of time 3 or 4 it y a. I love the whole album 'Add' or 'complete artist' with a single button feature that we have now. But have an unexpected break as you describe not happened to me yet, so I'll cross my fingers and hope that it does not work. I hope it was just a case of the moat and this won't happen again!

• Please HELP - cannot get online with web access router, create page for WRT54G

  I do something wrong that I cannot receive a confirmation email and can not get a response from someone?

  Impressive... it worked! I tried to access the ip address before but nothing helped. I took a deep breath and read the instructions of your and it is ready now. Thank you. I was struggling with this days!

• When I combine 2 documents, strange things happen...

  Hello

  I reap what I have sown - I think because I do not have correct pages master issues a few weeks ago, I now suffer some strange mojo when I try to add what I'll call my PT document. 2 at the end of my document, PT. 1. I realized that, to maintain the differences in line 2, I simply add an extra page at the end of the document 1... that seemed to work.  But many pages of document 2, when I moved their end 1, text on them.  On other pages, which should be there are missing.

  I do something like select 'Replace all Master Page items' before to spend my document pages 2?

  Thanks a lot for any advice on this.

  Malcolm

  Question share entire P.S.: when I tried to backup (for Creative Cloud) my file which has all my photos and logos and any other thing in it, I learned that you cannot save records cc.  You can save only individual files.  Does this mean that I have to take all these individual files out of my fairly complex hierarchy of folders - all content in my big file 'Book project' - before I can download them?

  Who demolishes what is a very organized arrangement!

  OK, I think I solved the problem by getting rid my Master A of page elements in paper 1.  The pages I'm moving over document 2 were made using a page master B, and when they were moved, they got the master items A plastered on top.

  I think I'm now OK!

  Best regards, Malcolm

• Please help send an email with the html page in the body

  I need an html page on the body of an email to send a blast to send to our customers.

  HTML emails can be a bit complicated. You can design in Dreamweaver, but you shouldn't really have to send emails of mass through to your personal e-mail account (or your company account). Could you put blacklisted by spam filters in the company and make your pretty useless email addresses.

  Mass emailings (more than a few hundred addresses) I use http://www.icontact.com.

  You can build the email through their site (without DW) or you can import your DW html file to their service.

  Some things to keep in mind with the HTML email...

  1. the use of absolute links to the images and files on a server you control

  2. use a limited amount of inline css (no external css or integrated)

  3. specify in table based layouts, css support is spotty at best with email clients

  4. thewill be eliminated a number of email clients don't rely not on what it is between theTags makes to your recipients

  5. do not use an email only to images. HTML text is very important to keep from being labeled as spam, make the secondary images in the message, many email clients will not download images without permission of the user

  6. include a link to unsubscribe so people can get off your list

  There are more things to watch, but who are the biggest. Here are some other good info: http://alt-web.com/Articles/HTML-Emails.shtml