Strange things happening to the sepia images in Lr 4.3

Similar Questions

• When bi-ecrans is used, and firefox is on the second monitor, the Firefox menu does not appear. Same thing happens to the bar when typing already visited sites of addresses.

  When bi-ecrans is used, and Firefox is on the second monitor, the Firefox menu does not appear. Same thing happens to the bar when typing already visited sites of addresses.

  I have the same problem and I got rid of it by disabling hardware acceleration of rendering in the settings dialogue. Now I see the Firefox menu properly on a secondary monitor.

• Strange thing happened when I tried an update of security of El Capitan

  Hello. Basically, I got a pop message yesterday saying ICloud could not connect with my Gmail account and then as I proceeded to update my disconnected iMac but would not open a session as a progress bar would not end. I have tried rebooting without success, then after another reboot I tried the command R - disk utility - first aid and everything was fine. Then a reinstall via the R command yet and the progress bar ran twice but could not complete the second run so I let him all night. I came back the next morning found he had not completed but got the same popup message iCloud I had before. Don't know what I exactly bar clicked on a few options, but the Desktop reappears then things work ok now. The only thing is that the update is not completed and I hesitate to do so scared that the same thing is happening again. Can someone please enlighten me as I have now two updates pending? Thank you

  Long time no see!

  Phew, what Mac is this? You use the Wifi or Ethernet?

  Have reset you the Modem/Router?

• Very strange thing happening with Vista administrator/Standard username/password - please read!

  I have a serious problem, I was using a standard account for awhile until I decided to activate the Admin account, I have created a password for it BUT disabled then the password and when I used the Standard account and needed permission from Admin to do something in the standard, IT would BE STILL ASK me for PASSWORD BUT I did NOT NEED TO TYPE IT I just clicked OK and it went through

  The problem I have now is that I have disabled the administrator account from the command prompt (net user administrator / active: No.) to use only the standard, BUT NOW IT ALWAYS ASK me for THE ADMIN PASSWORD, BUT IT IS No. BOX to TYPE IT IN AND I can't USE a PROGRAM, I see a box with an "OK". I can't click or password I can't type in

  Now when I try to activate the administrator account with the user Standard order confirmation, it wont let me not allow him, so my Admin account is lost and I can't get Permission to do anything as a Standard user, I'm not a windows vista disc, I need advice on how to enable Admin account again Thank you.

  Hey, Vincenzo. If I read that post of the OP correctly the problem is not one of the password lost, but rather that he or she does not have a current administrative user on the system. It disabled the administrator built-in, but I forgot to make one administrative account, leaving only a user active Standard on the system.

  "DismalDaze" - try to go to Safe Mode. Although the built-in administrator is disabled, if there is no other administrative user on the system administrator can be activated in Mode without failure. Go in Safe Mode, press the F8 key as the computer starts. If you see an icon for administrator on the Welcome screen, connect to it and set up your users as recommended at the end of this post.

  If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled and you will need to work more. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third-party burning software such as Nero, Roxio or the free ImgBurn (www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  Now remove the rescue CD/DVD, you have done, reboot Windows and log on to the built-in Administrator account, you enabled. After you have created your additional administrative account by the recommendations below, log in there and disable the administrator built-in yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Strange thing happening with ASA and RDP by filtered VPN

  Hello

  I'm hoping to get support here anymore as I am clearly out of options.

  I have 3 ASA 5505 2 and a 5510

  all of them are connected via the internet by VPN

  a 5505 is on my principles and I use VPN to serve 2 other sites that belong to the same customer. Clearly, I want to go the VPN will aswell to localities other than traffic from them.

  the strange thing is if I put an IP address a whole on the acl filter can I use RDP, for when I apply the filter, where I activate TCP/3389, I get an error that the server is not found.

  in forestry, I see the package hit the ACL:

  
  <167>:Jul 05 21:13:19 CEDT: %ASA-session-7-106102: access-list VPN_Filter permitted tcp for user '' User-Lan/192.168.1.87(58603) -> XS4ALL/172.31.2.12(3389) hit-cnt 1 first hit [0xbe2548e2, 0x0]
  <166>:Jul 05 21:13:19 CEDT: %ASA-session-6-302013: Built outbound TCP connection 43436 for XS4ALL:172.31.2.12/3389 (172.31.2.12/3389) to User-Lan:192.168.1.87/58603 (192.168.1.87/58603)
  
  VPN filter:
  access-list VPN_Filter extended permit ip any any log debugging inactive
  access-list VPN_Filter extended permit object RDP object-group DM_INLINE_NETWORK_8 object Lan-Pat
  access-list VPN_Filter extended permit udp object-group DM_INLINE_NETWORK_4 object Lan-Pat eq tftp
  access-list VPN_Filter extended permit icmp object-group DM_INLINE_NETWORK_1 object Lan-Pat log debugging
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_3 object Lan-Pat eq www
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_5 object Lan-Pat eq https
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_6 object Lan-Pat object-group DM_INLINE_TCP_1
  access-list VPN_Filter extended deny ip any any log debugging
  
  any help will be greatly appreciated!
  			 
  If do you a RDP from your PC to the client session, port TCP/3389 is used on the client side and not on your side. So your ACL should be the following:
  VPN_Filter list extended access permitted tcp 172.31.2.0 255.255.255.0 eq 3389 192.168.1.0 255.255.255.0
  Remember: in a VPN-filter is the syntax = remote destination, local = source. Port 3389 is on the remote end.
  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  
      http://www.Kiva.org/invitedBy/karsteni
  		   

• A strange thing happens at disposal when inserting {tag_blogpostbodypreview, read more}

  I used this tag often {tag_blogpostbodypreview, read more}, but in a recent update to an old site replace {tag_blogpostbody} {tag_blogpostbodypreview, read more} forces the "sidebar" DIV to slide under the list of Post and not to the right, as if this tag has a clear: both or block style.

  I have made sure nothing else causes this and find that by replacing those tag between them on the layout of message list page breaks the layout of the blog altogether

  Here's the catch, it happens on the 'home page' list of Blog, but not when you view the details of the message or when you go to the page #2 in the list of Blog view

  See homepage here

  http://www.peptalks.me/PEP-talks-blog

  See here a Post of details and Page 2 of the list

  http://www.peptalks.me/PEP-talks-blog/page/2/

  http://www.peptalks.me/PEP-talks-blog/familiar_foods_upgraded_is_gooooood

  For the life of this one I can't understand why this is happening.

  Any idea would be interesting a cocktail on me.

  
  Mouma

  Yes quite strange. {tag_blogpostbodypreview} pull content directly from the blog, formatting and where all the as {tag_blogpostbody, 400, read more} only pulls the characters, so I wonder if there is a misplaced div or tag somewhere in your first set of blog posts which causes which. That would explain why it only appears on the first page and not others.

• Strange thing happens by adding the phone number

  Hi all

  I'm tring to add a phone number of the phone book.

  However, my application brings original request for telephone directory of the instrument. This is the normal behavior?

  I want to add in silence, and another thing is that when I click on trackweel on objectChoiceField, it brings also the device [honebook application.

  I used the trackwheelClick() action.

      public boolean trackwheelClick(int status, int time)
      {
          Contact contact=null;
          int type=0;
          Field leafField =  this.getLeafFieldWithFocus();
          try
          {
              BlackBerryContactList contactList =
                  (BlackBerryContactList)BlackBerryPIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
              PIMItem pimItem = contactList.choose();
              contact = (BlackBerryContact)pimItem;
  
          } catch (PIMException e)
          {
  
          }
          if (leafField == okBttn)
          {
              contact.addString(Contact.NAME_FAMILY, BlackBerryContact.NAME_FAMILY, givenName.getText());
              contact.addString(Contact.NAME_GIVEN, BlackBerryContact.NAME_GIVEN, familyName.getText());
              if (pChoice.getSelectedIndex()==0)
                  type = BlackBerryContact.ATTR_MOBILE;
              else if(pChoice.getSelectedIndex()==1)
                  type = BlackBerryContact.ATTR_WORK;
              else if(pChoice.getSelectedIndex()==2)
                  type = BlackBerryContact.ATTR_HOME;
              contact.addString(Contact.TEL,type, areaCode.getText() + phoneNum.getText());
              try
              {
                  contact.commit();
              } catch (PIMException e)
              {
  
              }
          }
          return false;
      }
  

  Please help me solve this problem.

  Thank you

  DK

  Please refer to the example here:

  How to-AddressBook access contacts
  Article number: DB-00147

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800363/How_To _...

• Strange things happening: opening on their own programs, mouse clicks things I click...

  I had some strange problems on my Windows Vista laptop. He just started acting today. This time, I tried all sorts of scans, cleanings, controls problem, but nothing helped.

  It is quite difficult to describe, but basically the computer seems to act as if the mouse is which is clicked when I even touch it not. Thus, for example, then I click on the start menu or right click to bring up a menu drop down, it flashes briefly upward but then disappears. Or I run an application, and a box pops up saying: 'Are you sure you want to close this program' when I have not pressed on what. In Excel, I try to type something in a cell, but before I finished typing the text disappears (exactly the same happens when I type an address in the web browser). Sometimes a window will close only on its own.

  This is not the case all the time and even when it happens that I can still do a lot of normal stuff on the computer. But once it flows in the it does not seem to worsen progressively. Then, when it becomes too much and I have to restart the computer once it has restarted, it starts to get really loud constant beep, and I have to press F8 a few times to stop the ringing and bring up this menu of options (safe mode, etc.).

  I'm not particularly computer literature and have exhausted all avenues, I know that to solve the problems. There is no reference to this problem in other messages of the forum here. Any help would be much appreciated.

  My laptop has a touchpad, but I use a wired mouse. (And Yes, I tried a different mouse, the problem persists)

  (P.S. not sure I posted this in the right part of the forum. Please let me know if I would be better to post elsewhere)

  Hi ComputerNerdDJMJ,

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  I suggest you follow the steps; It will help you solve the problem.

  Method 1: your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows?T1=tab05

  Method 3: Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow these recommended steps and post if you still experience the problem.

  Hope this information is useful.

• Two strange things happened! v01, 01.22 A

  The new firmware worked fine until it started last night. I have listen to some FM and use the new Sleep function... It was the first time I had ever used the function Sleep when I loaded the firmware when it came out.  OK, I updated the time 60mins after about 40mins I decided to not let it closed so I reset the timer to _ or no time and moved to hear some MP3 and after a short time, maybe 10-15 minutes the player just * stop * down without reason. When I turned back I saw that he did not break itself as usual before you stop if it comes to start playback of the MP3 where she had stopped...  Strange!  What has caused this? Bug in the new firmware?

  Another problem is the list to go. I put 3 CD to the list go and started to play my play list, and he's on a break after that first CD has been made rather than continue with the rest of my list... Once again! I think that it is strange behavior, I checked my % battery left and I got 47 percent remained so power should never have a problem...  Any ideas? Thank you! George

  I just wanted to add that I was not doing something with the player. It was on my night stand when these two questions is here!

  Hi George.

  I vaguely remember something about your sleep timer problem that someone wrote on the right after the update. I think that is that after someone changed his mind about the sleep function, like you did, that he always operated in all the originally scheduled time even if they had canceled it. According to me, the workaround suggested was to turn it off, then restart the "rocket" to completely stop the form activation sleep timer.

  The question of the GoList you describe has not yet happened to me, but I used it only for the first days of time 3 or 4 it y a. I love the whole album 'Add' or 'complete artist' with a single button feature that we have now. But have an unexpected break as you describe not happened to me yet, so I'll cross my fingers and hope that it does not work. I hope it was just a case of the moat and this won't happen again!

• When I try to load a photo CD, nothing happens at all. The same thing happens with the help of CD audio.

  I put my CD in the drive and the only thing that happens is some sound then nothing. The CDs are not load as they did.

  Hello

  Next message will be on automatic/AutoRun reading where it is also a question AFTER you do these:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• DNxHD teal'c Strange blocks appearing on the yellow image

  Hello

  I'm new to export DNxHD, but I tried to export a spot of cable with DNxHD MXF OP1a envelope, with a resolution of: 1080 p/29.97, DNxHD (RGB 444) 440 10 bits.

  Everything is great, even better than my usual export Quicktime, Pro Res 422 or H.264. The only problem is that for a single section where I have yellow flashes arise, a strange block teal'c appears on each bolt (image attached). There are not many options when you export directly from DNxHD, but I tried the same export through the DNxHD Quicktime where I played with the color mode, bit depth and the same problem occurred. I really want to use DNxHD, but it will not help for me unless I can fix this and fix this if it continues to offer videos in the future.

  (FYI, exporting through my usual methods does not cause in the blocks of Sarcelles, and they are not visible in Premiere Pro, only to export using DNxHD).

  (I'm using Premiere Pro CC 2015)

  Any advice would be greatly appreciated!

  Thank you

  Wine

  

  I think I found the answer to my own question

  But I'll let him place in case someone is facing the same question.

  Export under DNX 220 X 1080 p 29.97 (1080 p/29.97 DNxHD 220 10-bit) instead of RGB 444 (440 10 bits) seems to have resolved this issue. While the colors aren't as perfect as they could be, it is still an excellent choice of good quality and export quick time. And more this problem does not occur all the time, therefore, for the most part, I'll continue to use DNX 440 X and if I see problems go to DNX 220 X.

• When I combine 2 documents, strange things happen...

  Hello

  I reap what I have sown - I think because I do not have correct pages master issues a few weeks ago, I now suffer some strange mojo when I try to add what I'll call my PT document. 2 at the end of my document, PT. 1. I realized that, to maintain the differences in line 2, I simply add an extra page at the end of the document 1... that seemed to work.  But many pages of document 2, when I moved their end 1, text on them.  On other pages, which should be there are missing.

  I do something like select 'Replace all Master Page items' before to spend my document pages 2?

  Thanks a lot for any advice on this.

  Malcolm

  Question share entire P.S.: when I tried to backup (for Creative Cloud) my file which has all my photos and logos and any other thing in it, I learned that you cannot save records cc.  You can save only individual files.  Does this mean that I have to take all these individual files out of my fairly complex hierarchy of folders - all content in my big file 'Book project' - before I can download them?

  Who demolishes what is a very organized arrangement!

  OK, I think I solved the problem by getting rid my Master A of page elements in paper 1.  The pages I'm moving over document 2 were made using a page master B, and when they were moved, they got the master items A plastered on top.

  I think I'm now OK!

  Best regards, Malcolm

• Strange things happens after installing 11.10.4 El Capitan.

  Here is what happened on my mac after installing 11.10.4 about 32 hours ago.

  1. the mac has begun to run very slowly.  Rolls of almost every click.
     1. I give it some time to come because I think the new OS kind of learns his way around and will be exploited later more quickly.
  2. My reminders up and restored to a set of callbacks so that I was updating their previous and reminders that I had previously entered simply disappeared.
     1. all preferences indicating reminders would be updated to legacy via iCloud were selected.  However,...
     2. a day after the installation of 11.10.4 on my mac that reminders on my iPhone had not last updated with new reminders on my mac.  Maybe it's because new reminders were written before that I installed 11.10.4?
     3. I entered a new reminder on my iPhone at around 18:00 5/11
     4. At about 20:00, 5/11 I started working with reminders on my mac.  While I was doing if the older iPhone reminders has replaced the reminders on my mac, actually go back to a previous version.
     5. Maybe it's another example of 11.10.4 ' entering the stream?
  3. My email signatures came back to a previous series of signature after using a new signature for two days.  As reminders, the new signature disappeared.  Also, signature preferences came back to the default of not having a signature that is automatically included in every email.
     1. My new signature had been kept in my sent mails, so I did a simple copy/paste, choose the signature to use in the value of the email, and I'm back to where I was.

  Someone else, El Capitan upgrade problems?

  Please post a report of EtreCheck of your system. Please click on the link, download the app and then after the results of the report in your reply to this message. Then we can look for obvious problems.

  If you want to learn what is EtreCheck, just click the link.

• A strange thing happens when I try to send a message from Outlook Express

  Whenever I try to send a message from Outlook Express to my Yahoo email account, the dialog box will move immediately to the status bar.  Is not that bad, but it seems too far on the right side of the screen, and I right-click on the status bar to maximize.  Any ideas on why this is happening?

  Can click you the title bar when it is on the right side and then move it to the left (try also the arrows).  If you can move it and then close it, then it should open in the center of the next time.

  Steve

• All your existing data transfers for win8 win7? The same thing happens to the settings and configuration of the printer?

  Original title: fact of data transfers

  All your existing data transfer of win7 for win8 and do o all your settings and printer configurations do the same thing

  The upgrade to Windows 7 or later will preserve my personal files, applications, and settings?

  Yes, the upgrade to Windows 7 or a later version will preserve your personal files (documents, music, pictures, videos, downloads, Favorites, contacts, etc., applications (IE.) Microsoft Office, Adobe applications etc), games and settings (ie. passwords, dictionary, the application settings).

  My programs, equipment and existing drivers will work on Windows 8?

  Most of the applications and designed for Windows 7, hardware drivers or later should work with Windows 8. Of course, with significant changes expected in Windows 8, it is preferable to that contact the software developer and supplier of equipment for the support for Windows 8. Windows 8setup will be keep, update, replace, and may require that you install new drivers via Windows Update or the manufacturer's Web site.

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7.

  Also check:

  How to back up and restore your files manually

  To learn more.

  The upgrade from Windows 7 to Windows 8

  Please note that if you migrate to and not 8.0 Windows 8.1, you must perform a custom installation.