Very strange thing happening with Vista administrator/Standard username/password - please read!

Similar Questions

• Strange thing happening with ASA and RDP by filtered VPN

  Hello

  I'm hoping to get support here anymore as I am clearly out of options.

  I have 3 ASA 5505 2 and a 5510

  all of them are connected via the internet by VPN

  a 5505 is on my principles and I use VPN to serve 2 other sites that belong to the same customer. Clearly, I want to go the VPN will aswell to localities other than traffic from them.

  the strange thing is if I put an IP address a whole on the acl filter can I use RDP, for when I apply the filter, where I activate TCP/3389, I get an error that the server is not found.

  in forestry, I see the package hit the ACL:

  
  <167>:Jul 05 21:13:19 CEDT: %ASA-session-7-106102: access-list VPN_Filter permitted tcp for user '' User-Lan/192.168.1.87(58603) -> XS4ALL/172.31.2.12(3389) hit-cnt 1 first hit [0xbe2548e2, 0x0]
  <166>:Jul 05 21:13:19 CEDT: %ASA-session-6-302013: Built outbound TCP connection 43436 for XS4ALL:172.31.2.12/3389 (172.31.2.12/3389) to User-Lan:192.168.1.87/58603 (192.168.1.87/58603)
  
  VPN filter:
  access-list VPN_Filter extended permit ip any any log debugging inactive
  access-list VPN_Filter extended permit object RDP object-group DM_INLINE_NETWORK_8 object Lan-Pat
  access-list VPN_Filter extended permit udp object-group DM_INLINE_NETWORK_4 object Lan-Pat eq tftp
  access-list VPN_Filter extended permit icmp object-group DM_INLINE_NETWORK_1 object Lan-Pat log debugging
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_3 object Lan-Pat eq www
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_5 object Lan-Pat eq https
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_6 object Lan-Pat object-group DM_INLINE_TCP_1
  access-list VPN_Filter extended deny ip any any log debugging
  
  any help will be greatly appreciated!
  			 
  If do you a RDP from your PC to the client session, port TCP/3389 is used on the client side and not on your side. So your ACL should be the following:
  VPN_Filter list extended access permitted tcp 172.31.2.0 255.255.255.0 eq 3389 192.168.1.0 255.255.255.0
  Remember: in a VPN-filter is the syntax = remote destination, local = source. Port 3389 is on the remote end.
  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  
      http://www.Kiva.org/invitedBy/karsteni
  		   

• Please help, strange thing happened with scsi

  OK, this can be confusing because it is to me. Here is what happened.

  My two hosts ESXI 1 (. 75) and esxi host 2. (81) where work very well (connecting to databases) (total 9)

  what I did try to install another physical server (the network) not vmware naked 2008 Server and connect to the same table (for the installer backup) then all of a sudden when I formatted one of my (UNUSED) of records in the table the esxi server 1 INTERRUPTION of the connection to this specfic table. ESXI host 2 has no trouble accessing and seeingboth of data stores. I tried reseting network management and even restart ESXI host 1. I am able to access VIA putty to get out of trouble. If I try to put scsi under static IP address I get an error below (please help it is a production server)

  both esxi servers

  Several links to troubleshooting iSCSI.

  http://www.Vladan.fr/how-to-troubleshoot-iSCSI-connection-to-your-San/

  http://KB.VMware.com/kb/1003952

  http://KB.VMware.com/kb/1003681

• A week ago, I bought a subscription to CC in Adobe Photoshop and Lightroom. I can access Photoshop but this screen still ask me for the license number or if I want to continue with the trial. The same thing happens with Lightroom, only he mak

  A week ago, I bought a subscription to CC in Adobe Photoshop and Lightroom. I can access Photoshop but this screen still ask me for the license number or if I want to continue with the trial. The same thing happens with Lightroom, only it makes me sign and taking me in the tutorials. I can't access the actual program. Help!

  Ask the serial number http://forums.adobe.com/thread/1234635 has a link to FAQ

• What happens if the administrator changes the password without going 'in' a new password?

  What happens if the administrator changes the password without going 'in' a new password? I think I've changed my password, then returned to add a hint, but who has not to enter a password and confirm it. How windows 7 would react to this. He now tells me the I just changed password is incorrect.

  The new password is now empty.

  It would be a good time to plan in advance and create, test and the paper has a Director of spare, even you have a spare House key. Surely you don't want to take the risk of setting locked out by relying on a single administrator account.

• Just start with CC and there are VERY strange things boring already

  I just got on Board finally CS5 CC and these are my first numbers, if anyone can comment on, thank you:

  The launch is double to triple the time of CS5. About 60 bounces up and down, amazing. Never seen a software take so long to launch. What is happening with this? My imac 27 "has no problems with other applications.

  You open the application and there is a presentation text of text called recent items, and yet it is not clickable. I clicked and nothing happens. Then I'll file, recent items, but it is grayed out recent items.

  I choose my work space, but after that I have quit/restart, my workspace is not launched, because of the default value.

  Finally, in preferences, I choose the white light of appearance, but again, after that I quit/restart if lance in its color dark by default.

  This will help to start me, thank you!

  larry4545 wrote:

  The launch is double to triple the time of CS5. About 60 bounces up and down, amazing. Never seen a software take so long to launch. What is happening with this? My imac 27 "has no problems with other applications.

  It is certainly not true.  CC 2015.1.2 takes about four seconds to launch on my desk and less on my laptop that has two SSDS in raid0 configuration

  How many fonts you have? When Photoshop is launched, you will see the splash screen?  If so (and you definitely should) look at the progress window (framed in red in my screenshot and try and see what Photoshop does when it is at a standstill)

  

  Do you have any third party plugins or extensions?  Launch Photoshop while holding down the SHIFT key. This forces the latter supported without these plug-ins, so if it loads a lot faster, you know where to look.

  Have what arrangement of drive work you done in the preferences?  For example, if you have assigned a drive that is fault or past mode standby, Photoshop would take time wake up this drive, or decide it's OK to go ahead and use it.

  Out of curiosity, if you open Photoshop, then close and immediately open once again, it loads faster?

  That said CS5 etc, but apply to CC

  Problems with Adobe Creative Suite 6, CS5.5, CS5 launch

  Have scrutiny to this one that OSX has problems with the fonts and Photoshop

  The problems of fonts in Adobe Photoshop CC, 2015, 2014, CS6, CS5

  In troubleshooting PC posted guide, look at the permissions.

  Tried to migrate the settings of Photoshop CS5 and could well have messed up.  Try to reset the preferences (preferences > general tab)

  So still stuck, uninstall Photoshop and run the cleanup tool, and then reinstall it

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

  Good luck and please let us know how you are and what the fix was when get you it to work properly.

  Thank you

• Strange things happening to the sepia images in Lr 4.3

  I am at my wits end and hope someone can help out me! I spent hours and hours with tech support Adobe to have a hard time to understand thick accents and not enough knowledge to understand the question. And my case was dropped because of schedules; I was busy with Thanksgiving that seemed to make no difference for the one who is not celebrating! But I digress...

  I don't really remember what happens in Lr 3.5, but it's in Lr 4.1 - 3 and the only effects Sepia toned images that I modify most of the time. Just finished about 200 images of an event where I'll put them on a DVD to music for the purchase. They all was going well when I'm done with them. I exported to JPEG, the side long 1024, quality 74. The rest of the short iMovie, long history made looks terrible, co-opted to iDVD. First time visualizing everything was good, but after several viewings after reorganization/add/remove images of the project, they look crap. For some very strange reason, many takes a pink/reddish color and often introduce artifacts that were simply not there in Lr I watched my images edited on 2 different Mac and the question remains, so not my computer.

  I have an iMac 27 ", OS 10.6.8 (completed to date), 3.3 GHz core duo, 12 GB RAM, 960 GB of free space on a 1 TB HARD drive. Warranty the display and the recalled hard drive have been replaced, so my 4.3 Lr is completely fresh; not from a backup. With the new recent HARD disk, I have not calibrated my computer at the moment. My images are on a WD 3TO with 1.25 TB of free space (a bit on the low side, but should not do anything). My camera is a Sony A33 and strictly I shoot in RAW to sRGB; using ProPhoto in Lr and for a while now that in the manual.

  I would be grateful if someone can explain why it is a problem. I need to finish with this DVD for the event, and if I can't understand this point, he has lost time and money! It is true that I did not this very long, so if this is something I am doing wrong, I would really like to know what that is...

  My examples:

  Screenshot of the image in the develop Module

  

  JPEG export (coloring/banding is obvious in the upper right)

  

  > I thought images looks the same whether in the library, develop or slide show, but this isn't the case for me.

  Library and slide show must be identical. Develop is a special case where you can sometimes see very subtle differences in hue to the library, but this does not sound subtle for me at all.

  > There is no a lot of images in this catalogue and to be honest, not sure a new catalogue will bring in the VC that I work out of. Can you tell me if it will be?

  The trick is to select the pictures (or its VCs) work and export a new catalog of this (file-> export of catalog). Be sure to deselect "export negative files ' and"(Inclure aperçus disponibles) '. " Then load the new catalog (you can just double click on it.) Previews will be re-created in this new catalogue.

• Satellite P300 - 1GI (PSPCCE) what happens with Vista after installing Win 7?

  Hello

  I intend to install windows 7 on my laptop, but want to know what is happening with my windows Vista, I'm running. I already made the recovery of the DVD but are they enough reinstal windows Vista after installing windows 7? or wat can I do so that this is possible?

  (I'm sorry for my bad English, I am from the Netherlands)

  Thank you
  Futience

  Hello

  The recovery disk allows you to reinstall Vista and all the Toshiba drivers and tools.
  Don t be afraid to install Win 7.
  If something goes wrong, you will be able to retrieve the laptop using the recovery disk. This will outline the laptop back to factory settings

  See you soon

• SDO_BUFFER made some very strange things

  Hi people,
  With the help of 11.2.0.3.
  
  I wrote some front-end tests for a service that accepts entries of the geometry. Sometimes we have people with geometries Web Mercator them wrong labelling as geodesics. Now, Oracle Spatial validation does not seem to care if geodetic data are actually on the ground but simple enough to test whether an entry is outside of the -180 /limits-90. However I have a service that accepts a point and then buffers and I thought I'd look just the buffer to check that her on Earth. Then, it came to light.
  
  Given a point quite reasonable Web Mercator, we can ignore it as NAD83 but it still validates well.
  

  SELECT 
  SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(
     SDO_GEOMETRY(2001,8265,SDO_POINT_TYPE(-9778922.562372, 5219660.84450598,NULL),NULL,NULL),
     0.05
  ) FROM dual;

  However, if I take this point 'foreign offworld' and 10KM buffer, I get a nice GEODESIC polygon in the South China Sea.
  

  SELECT
  SDO_GEOM.SDO_BUFFER(
     SDO_GEOMETRY(2001,8265,SDO_POINT_TYPE(-9778922.562372, 5219660.84450598,NULL),NULL,NULL),
     10,
     0.05,
     'UNIT=KM'
  ) FROM dual

  Anyone can take a shot at that? I thought that maybe I had stumbled on the Dr. Ravada and den of the island volcano of his team, but the polygon moves when you change the entries. In any case it's weird and I take my tests upward in front of the stage of the buffer.
  
  See you soon,.
  
  Paul

  Hi Paul,.

  Are we supposed to take a stab to locate the hideout of the island or to understand what is happening with the buffer?

  On the latter, I think that the geodetic coordinate systems enveloping the land around and just keep still once you exceed +/-180/90. I translate your longitude, for example, as

  1. go to-180, the dateline
  2. then go all about X number of 360 s
  3 then stop-62 degrees west of the dateline

  Or

  Select MOD(-9778922.562372,360) + 360 double
  --> 117

  In the same way

  Select the double (5219660, 360) MOD
  --> 20

  There is: http://www.wholesalehalloweencostumes.com/ELX9200-adult-wheres-waldo-kit.html

  Matt

• Moniter shuts automatically just after passing on PC. Just installed Windows 7. Didn't happen with Vista!

  Since having Windows 7 set my PC I find this imerdiately after all fires the moniter turns off.  I ran all the tests available on the moniter and they all come back as OK.  One had the same experience or any suggestions on how to solve this problem.  It becomes very annoying whenever I turn on!

  David

  Please see the following Article in the Knowledge Base

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  Check the Power Options settings in the Control Panel

  Beginning

  Control Panel

  Material and audio

  Power options

  Change plan settings for the current plan

  Turn off the display

• I don't even know what to call this problem with Windows 7! Can someone please read and help?

  Hi all

  What is c?

  I have half a dozen problems with Windows 7 right now, but let's start with the most irritating.  Screens disappear and reappear.

  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  And try to block and the copy is a nightmare of one window to the other.  Or even on the same page.  I try to block something and move away, and the "block" disappears.

  I thought it might be my mouse, which is your ordinary Microsoft Optical Mouse 2V.0, I went to devices and printers and formatted my mouse (I've never done this before) and my Microsoft Keyboard and recorded.  Nothing wrong with the keyboard.  The mouse just kept screwing as it did before, and I used your basic standard settings - nothing fancy or different.

  Now I write in this little place and nothing is to move, the mouse behaves - what IS IT?

  I am getting this problem in Windows 7 because honestly, I have no idea where else to put it.

  And I have just started with the problems.  Can you please, please, please help?

  I can't help but think that all the problems are related, so I'll put one little summary of what else is happening.

  1 out of nowhere part, I got a notice saying that I had to change the settings to allow Windows update immediately and without my permission (I think that's what he said and I know that there is a setting in devices and printers? or something like that where I allow edits without review)

  2. I can't convince my printer there is NO residential group and that I am the administrator and the only person using the computer.  This screw with my settings (wired) network too.

  3. I have a four-in-one printer (print, copy, scan and fax).  I am at home lately and will be years apparently, so I decided that I wanted to get the printer scanner and fax.  He was already printing and copying.  I turned off, unplugged and did not know that I had to uninstall all software and then reinstall it.  I don't have the time to do it again; I want a clean computer before you set up the printer.  Well, it seems to create small problems in the world.  I keep getting directed to devices and printers, but I want to read all the information before I uninstall just in case.

  4 modules!  They are the bane of my existence.  I do not understand what they are doing when I go and look at them individually. I tried to use IE10 without addons and it's just a big headache.

  5 constantly getting a yellow banner at the bottom of my screen asking me if I want to run * some * and I wanted to know the risks involved.

  6. constantly asked about Active X.  What is it and what does want of me?

  7. all of a sudden an hour ago, my computer has decided to go to "sleep" mode and wants me to change user for myself and when I do, it says it is locked, but I hit the beautiful image and it opens on the regular Windows screen.  WHY?  I don't use a screen saver and I got 20 minutes sleep mode which is just the entire dark screen until I touch the mouse.  No more!

  Guys do you see why I'm going crazy?  Help, please!  I spend all my days this last week and one before that trying to move things.  All this because I wanted my printer to scan.

  ···
  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  ···

  ^{Click Start or press the Windows key and type mouse but do not hit Enter. Search change how your mouse above control panel section.}

  ^{When this new pane opens, uncheck the Activate a window by hovering over it with the mouse. Click OK at the bottom to save your changes.}

• Strange things happening: opening on their own programs, mouse clicks things I click...

  I had some strange problems on my Windows Vista laptop. He just started acting today. This time, I tried all sorts of scans, cleanings, controls problem, but nothing helped.

  It is quite difficult to describe, but basically the computer seems to act as if the mouse is which is clicked when I even touch it not. Thus, for example, then I click on the start menu or right click to bring up a menu drop down, it flashes briefly upward but then disappears. Or I run an application, and a box pops up saying: 'Are you sure you want to close this program' when I have not pressed on what. In Excel, I try to type something in a cell, but before I finished typing the text disappears (exactly the same happens when I type an address in the web browser). Sometimes a window will close only on its own.

  This is not the case all the time and even when it happens that I can still do a lot of normal stuff on the computer. But once it flows in the it does not seem to worsen progressively. Then, when it becomes too much and I have to restart the computer once it has restarted, it starts to get really loud constant beep, and I have to press F8 a few times to stop the ringing and bring up this menu of options (safe mode, etc.).

  I'm not particularly computer literature and have exhausted all avenues, I know that to solve the problems. There is no reference to this problem in other messages of the forum here. Any help would be much appreciated.

  My laptop has a touchpad, but I use a wired mouse. (And Yes, I tried a different mouse, the problem persists)

  (P.S. not sure I posted this in the right part of the forum. Please let me know if I would be better to post elsewhere)

  Hi ComputerNerdDJMJ,

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  I suggest you follow the steps; It will help you solve the problem.

  Method 1: your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows?T1=tab05

  Method 3: Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow these recommended steps and post if you still experience the problem.

  Hope this information is useful.

• When I try to load a photo CD, nothing happens at all. The same thing happens with the help of CD audio.

  I put my CD in the drive and the only thing that happens is some sound then nothing. The CDs are not load as they did.

  Hello

  Next message will be on automatic/AutoRun reading where it is also a question AFTER you do these:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Strange thing happened when I tried an update of security of El Capitan

  Hello. Basically, I got a pop message yesterday saying ICloud could not connect with my Gmail account and then as I proceeded to update my disconnected iMac but would not open a session as a progress bar would not end. I have tried rebooting without success, then after another reboot I tried the command R - disk utility - first aid and everything was fine. Then a reinstall via the R command yet and the progress bar ran twice but could not complete the second run so I let him all night. I came back the next morning found he had not completed but got the same popup message iCloud I had before. Don't know what I exactly bar clicked on a few options, but the Desktop reappears then things work ok now. The only thing is that the update is not completed and I hesitate to do so scared that the same thing is happening again. Can someone please enlighten me as I have now two updates pending? Thank you

  Long time no see!

  Phew, what Mac is this? You use the Wifi or Ethernet?

  Have reset you the Modem/Router?

• Strange things happens after installing 11.10.4 El Capitan.

  Here is what happened on my mac after installing 11.10.4 about 32 hours ago.

  1. the mac has begun to run very slowly.  Rolls of almost every click.
     1. I give it some time to come because I think the new OS kind of learns his way around and will be exploited later more quickly.
  2. My reminders up and restored to a set of callbacks so that I was updating their previous and reminders that I had previously entered simply disappeared.
     1. all preferences indicating reminders would be updated to legacy via iCloud were selected.  However,...
     2. a day after the installation of 11.10.4 on my mac that reminders on my iPhone had not last updated with new reminders on my mac.  Maybe it's because new reminders were written before that I installed 11.10.4?
     3. I entered a new reminder on my iPhone at around 18:00 5/11
     4. At about 20:00, 5/11 I started working with reminders on my mac.  While I was doing if the older iPhone reminders has replaced the reminders on my mac, actually go back to a previous version.
     5. Maybe it's another example of 11.10.4 ' entering the stream?
  3. My email signatures came back to a previous series of signature after using a new signature for two days.  As reminders, the new signature disappeared.  Also, signature preferences came back to the default of not having a signature that is automatically included in every email.
     1. My new signature had been kept in my sent mails, so I did a simple copy/paste, choose the signature to use in the value of the email, and I'm back to where I was.

  Someone else, El Capitan upgrade problems?

  Please post a report of EtreCheck of your system. Please click on the link, download the app and then after the results of the report in your reply to this message. Then we can look for obvious problems.

  If you want to learn what is EtreCheck, just click the link.