Stringers in slow speed not available

Similar Questions

• USB port high speed - not available on Tecra M1

  Hi all
  I joined my new external HARD drive to my Tecra M1 and XP says I use * not *; port USB high speed.
  Question: How can I switch to high speed USB port?

  Driver: Intel 82801DB/DBM USB 2.0 Hostcontroller - 24 D of Microsoft Version 6.1.2600.0 issued 1.6.2002

  Thanks for the reply in advance.

  See you soon,.
  Tom

  First of all, you can't 'upgrade' your internal USB port to a Highspeed USB port. This is NOT possible, but your machine must have at least 2! ports USB 2.0 capable.

  I suggest you do the following: download the latest drivers for your machine on Toshiba Driver download site, install and check if the error message appears, anywhere you´re attaching your USB 2.0 device.

  Usually one or 2 of these ports should be able to USB 2.0.

  If still, you get the same error message then come back and give some comments, then we can discuss more about.

  See you soon

• New Mac Pro, with dual AMD D500, GPU is not available?

  Is there something special I need to do to get the GPU to work in After Effects? Screen Information GPU said currently I Open GL, but the GPU is not available in the menu dropdown. In particular, I try to get the 3-d element performance, and I think that actually went slower than on my Mac Pro 2011.

  That's what chart using professionals are moving forward... Please tell me Adobe did not drop the ball on this one. He came out for almost a year!

  Element runs its own back-end stuff, all parameter of GPU in After Effects should not have an effect on how it works. Something is preparing for what is element.

  Like Rick, all uses of the AE the GPU for accelerates the ray-traced rendering engine, so I wouldn't worry at all. The inclusion of Cinema 4 d with your After Effects installation has made obsolete the raytraced render engine. In addition, speed up the rendering raytraced required engine cards NVIDIA, AMD not. This is why you cannot set to use your GPU; It's not NVIDIA. But, again, as I said, the ray-traced rendering engine is obsolete, if it's not quite relevant.

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• After printing a page, when I try to print again it says print function is not available

  I have a Canon MG6250 connected via USB. I run Windows 7 with all latest updates and the version of Firefox is currently 38.0.5. Since some time, probably about a year, starting after a new version of Firefox, I think, I have problems printing. (Sorry I don't remember which version it started happening.) Unless I'm waiting for the printer to prepare completely, although the print dialogue box appears and I click on print, often (not always) nothing happens. If I try to print again I get a pop-up window indicating that the print function is not available. If I then close Firefox and try to restart it, it tells me Firefox is already running. I have to put an end to its process through the Task Manager. Often, I want to print from several tabs already charges with the pages to print. Even if I managed to get the first tab print, somewhere along the line the same thing often happens: before I printed the tab page from the last I get the box pop up again and I have to end the process of Firefox to make it work again. I can generally prevent his happening if I monitor the activity of the CPU of my computer (via System Mechanic) and make sure that all activity ceased after printing a tab until I try to print on the other. This makes printing of desperately slow Firefox!

  I don't have any problems printing of any other application.

  Note that relatively recently, due to a failure of the system disk, I reinstalled Windows and all my software. I was hoping that a by-product of doing this can solve the problem with printing from Firefox, but it didn't.

  I would be very grateful for a solution to this problem.

  I continued to use IE with no problems printing. But then after Firefox 3.0 came out I gave it another go - and the problem seems to have been resolved. No matter how much time I spend in another tab and select print, it behaves as it should. Thank God - Firefox is so much better than IE.

• My podcast Astrophiz not available in Australia

  Podcast argued, had received the e-mail from the approval, but when I click on the link provided a popup says "the object you requested is not currently available in the Australian store.

  I just connected to iTunes connect and my podcast feed is 'Active', not 'hidden '.

  I just have to wait, or is there an other action I can take?

  Thank you

  Brendan Astrophiz

  This message means in general that's not available everywhere. Certainly to research on "Astrophiz" does not produce any results in the United Kingdom, although it is not conclusive that research is often slow to activate; of course, I can't verify news without the URL of your store page that appears in the acceptance e-mail.

  If you have just to receive the email, it is quite possible, that it did not in the store again. I don't know what is the usual turnaround time, but you should probably give it a few days.

• Airport express at slow speed of the modem Arris SB6190

  Hello!

  My so-called WIFi Comcast gives me 150Mbps. My test only show 70 or slower speed on a WiFi test. After the call to them they told me to talk to my modems customer service. But their customer service is terrible. Here is my setup and yes everything has been switched off voltage and reset. And Comcast has been created with the modem while the Comcast guy was here. From the start after a few hard reset the express worked. Here's the question and the installation program.

  I have a SB6190 (not wireless), Arris directly connected to my Airport express. The express (which deals with my wireless connection) is connected to a switch (for wired devices). But I think that my problem is the Express. ? Not sure, I guess my question is I do something wrong in public services from the airport with the Express settings? I do not see why I get more 75Mbps wireless. Or maybe Apple if your reading, you can give it a fix on your next update. Hope you can help and thanks!

  Here some thoughts:

  (1) the Airport Express uses 100 ports Ethernet of Mbit/s, so the theoretical maximum speed that could be achieved with an Ethernet or Wi - Fi through the Express would be 100 Mbit / s.

  (2) the Express is not known for his speed wireless. On a connection of 100 Mbps Internet here, I see usually 45 - 50 Mbps at best more wireless, no matter if the 2.4 GHz or 5 GHz is used.  Ethernet checks better about 75-80 MB/s to the Express LAN port.

  (3) these are user to user support forums, so it is very unlikely that anyone from Apple will ever see your post. If you want to provide feedback to Apple, you can do so here: Apple Apple - AirPort Express - Feedback will acknowledge receipt of your message, but they will not respond after that.

  (4) the AirPort Express was introduced almost 4 years ago and it's been 2 years that Apple has provided an update firmware for the product, so additional updates are not probably... my opinion.

• drivers not available

  Hello

  I have a HP Pro 3000 Microtour, product number: XA787PA

  I want to upgrade the machine 32-bit to 64-bit Win7 so obviously need 64-bit drivers. But when I run the software from detection and then click on the "Software driver downloads" link, all I get is:

  Could not open page

  The service or the information requested is not available at this time.
  Please try again later.

  (Error: system-applsrv_unavail)

  I know that others have posted about this in the past, even suggesting things like changing the DNS settings, but that doesn't seem to be the problem. The service is really not available, or is there another problem?

  Thank you...

  I suggest you try the latter because there seems to be a problem with the HP servers.  I tried the same site as you, and got the same result, it is not your computer or communication.  If you are unable to access in the future, contact me and I will speed up your application.

• OfficeJet Pro 8210: network capabilities are not available.

  Hi, I have been setting up the printer above but I need to put in place on a network. I don't have the network option as it says "network capabilities are not available. When I print the network configuration page, it says network capacities have been disabled when the device has been implemented. I did not disable anything. The user manual says to use the display and move to restore the configuration - tools. I don't have an option to restore the screen of the printer. Please can you help me to reset the printer to factory settings. I'm a COMPUTER tech so don't know what I'm doing.

  Kind regards

  CMS

  Hi @CMS61,

  Welcome to the HP Forums! It is a wonderful location to converse with the community, get help and find resolutions. I understand that you don't have the network option on your printer as it says "network capabilities are not available. I'll be happy to help you in this regard. Great job, looking for user manual for the printer. It's always a privilege to work with a COMPUTER technician like you.

  However, to answer your question about resetting the default printer, it is possible by accessing the menu before display.

  • Turn your printer off.
  • Wait 10 seconds before you turn it back on again.
  • Just as the printer is turned on, press the back (arrow) button on the front panel of the printer "4 times."
  • If you do it right, the support menu should appear.

  Menu Access resets

  There are several options in the Help menu. To access the menu resets all what you need to do is navigate to the right until you find the menu "resets". Under Reset menu, you will find the three different types of resets, reset partial, semi full reset and reset complete. Select the appropriate type of reset you need, and your printer should reset itself.

  The partial reset

  Delivery to zero partial just updates the printer and erases the memory of the printer useless. This type of reset fixes minor printing problems like slow printing cartridge errors, etc...

  The semi-complete reset

  The semi Full Reset is the most useful type of reset. However, this clears all the custom of your printer settings and returns it to its default factory settings. Use this reset if the partial reset does not solve the problem.

  Please do not perform a full reset.

  It will be useful to visit these links.

  Link to perform a reset:

  http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/model/7902064/document/c05225613/

  Link to troubleshooting of the printer:

  http://support.HP.com/za-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/troubleshooting

  Thanks for reaching out. Please let me know if this helps in Mark this message as 'Accept as Solution'. If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click on the "Thumbs Up" button to give me a Kudos.

• Why the applications are not available through updates

  Why are all updates not available through downloads on apple's site. It's a real pain having to update computers 2 - cost me twice the bandwidth on a connection slow broadband.

  Any suggestion that would save me doing updates twice?

  Concerning

  Ron

  If you register for an application installation before installation, you can simply move it to another Mac without downloading it again.

• "FX Remix" is not available on your system

  After you import a song 6 track IOS of Garageband, I get an error message "" FX Remix"is not available on your system" and the computer (MBP 13 ", mid-2012, i7 2.9 GHz, 16 GB RAM, SSD, OS X 10.10.5) gives me a message"disk is too slow or overloaded system"stop playback completely.

  It seems that the latest version of iOS is not compatible with the latest (I think) Mac version (10.1.0).

  Any ideas?

  D.

  I have it exactly the same problem as well.  I created an entire song on my iOS device, imported into the Mac and more than half of these sounds is missing.  Even after downloading all additional files on the mac by clicking on the menu and selecting "Restore Sound Library", I still get the error message "Remix FX is not available on your system" when you try to open that specific song.

• Why new Xeon 1575 M v5 is not available in P70 in some region?

  In the Korean store Lenovo.

  Although the 1575M CPU xeon is available in many other regions,

  they are not providing the configuration option for Xeon 1575 M.

  Although 200 Mhz difference in clock speed is not high,

  It seems to be a mental barrier to make a purchase at the moment.

  Why it is not available now?

  When it will be possible to buy equipped P70 Xeon 1575 M?

  On Saturday, 1575 m is activated in Korea too. Sweet.

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• ENVY K150 27: INTERNET SPEED NOT EVEN ON THE NEW ENVY 27

  Brand new computer, put in place, updated all the drivers and software.  I run OOKLA speed test and the new system barely reaches 2 MB (connects to 5 MB to last year: for the 6Mo), speed Upload happens a.38 (sized pour.63 and ALWAYS hits it)

  other that to tell me my speeds suck (I live in a very rural area, and that's all there is)

  So I do not waste time anyones, I searched and tried to implement everything including:

  Network card driver update

  Check the HP site for any and all other updates

  Updated all Windows software

  What I have:

  Intel system

  Broadcom card Broadcom 802.11ac BCM4352HMB 2 x 2 WiFi adapt Driver Date 6/2014
  Router Netgear Mod B-90

  I have another laptop wireless and its speeds are 5Mo.63 every time that I test it

  This new system is still showing 2 + d/o et.36 u/l

  I ran this test several times.

  Interesting to me is that the new graph of d/l system HP K150 on OOKLA is always a Roller Coaster vs the laptop gets 5 MB and remains for the entire chart.  I didn't know if this allows to evaluate this issue.

  I can't tell you how much I appreciate those that Pitch and help on these Forums. I did it too.

  Thank you, Jerry

  Hello new @JERRYBSAYS,

  WMM maintains the priority of audio, video and voice, on the other applications that are less time-critical. QoS (Quality of Service) Wi - Fi Multimedia (WMM) ensures that applications that require higher throughput and performance, are inserted in the queues with a higher priority. (For example, video and audio applications receive a higher priority on applications such as FTP or file download.)

  In this way, say, listening to music, you are less likely to hear delays. Watch the video, you're more likely to see more flexible action. That delays the rest of network traffic for less critical nature - such as downloading large files - where a small delay is acceptable.

  WMM has four following queues, decreasing in the order of priority:

  • Voice.The highest priority queue with a minimum delay, making it ideal for applications such as voice over IP (VoIP) and multimedia streaming.
  • Video. The second queue of higher with a low time priority is given to this queue. Video applications are routed to this queue.
  • Best Effort. The queue of medium priority with a medium delay is given to this queue. Most IP applications use this queue.
  • Background. With high throughput low-priority queue. Applications, such as FTP, that are not time-sensitive, but that require high throughput, can use this queue.

  The only withdrawal back I see the disabling is that all will have the same priority for streaming won't be as good that she will also share the bandwidth with other such internet activities that offers day and downloads. You can always reactivate if you notice that it is at the origin of the problems will not hurt you to try out it.

  In the professional and above versions of Windows 7 and Windows 8/8.1, this feature is available for more fine adjustment by using the gpupdate. Unfortunately, it is not available outside these version, or might have settled the amount (%) that is set aside for different queues.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Scanning E-mail gives SMTP response and is not available. I'm not technical; How can I fix it?

  Scanning E-mail gives SMTP response and is not available. I'm not technical; How can I fix it?

  original title: scanning
  We really need the message full error, but for you to save time...
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for many programs AV, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.