Structure driver external display of records

Similar Questions

• W520 gets stuck on Thinkpad with a hard drive external display connected

  Hello world

  I just changed from an external hard drive of 500 GB to 3 to one, but if I leave that new connected for starting my computer the computer crashes to the thinkpad logo and launch startup.

  The boot order is set to boot from the internal hard drive before the media CD or USB, so I don't know why it is the way.

  I have no problem with my original external hard drive connected.

  This isn't a huge problem, just a downside I want to turn on my computer, wait 30 seconds, going ' Oh shoot, on the right, "have to disconnect the drive, and then restart.

  Thanks for any help!

  gtlane wrote:

  Hello world

  I just changed from an external hard drive of 500 GB to 3 to one, but if I leave that new connected for starting my computer the computer crashes to the thinkpad logo and launch startup.

  The boot order is set to boot from the internal hard drive before the media CD or USB, so I don't know why it is the way.

  I have no problem with my original external hard drive connected.

  This isn't a huge problem, just a downside I want to turn on my computer, wait 30 seconds, going ' Oh shoot, on the right, "have to disconnect the drive, and then restart.

  Thanks for any help!

  What level of BIOS are you running on the W520 and what external HARD drive brand? BIOS 1.38 was supposed to fix the POST with the 3 TB drive plugged into the USB 3.0 port. Please report back.

• Transfer Media Player on a hard drive external?

  I run XP and bought an external hard drive to my music collection.  Is it possible to transfer the Media Player itself on the hard drive external?  I'd rather play on Media Player on those of the drive, that there is none.  Choose a record and that's all that you can play at the same time; No shuffle or several artists in one sitting.

  Any suggestions, anyone?

  There is no need to transfer WMP itself hard disk external, WMP can perfectly handle music on other players.

  In WMP, please press F3 to display add it to the library, make sure that Advanced Options are displayed and add the folder music on the external hard drive in the list. Now, all the music on the hard drive will be added to the WMP library.

• detected external display suddenly stopped working - displays black screen

  original title: detected external display suddenly stopped working

  Hello

  I have searched in several forums, but have not been able to completely solve this problem.  It has been set provisionally and has not yet.
  This system I have:
  HP TouchSmart tx2 tablet pc with Windows Vista Service Pack 2 x 64-bit (Home Premium)
  AMD Turion (tm) X 2 Ultra Dual-Core Mobile ZM - 82, 2.2 GHz
  ATI Radeon HD 3200 graphics card
  I have been working for more than a year with a monitor flat screen Dell ST2310 external monitor and works very well with the setting "use external display only.  From one minute to the next two screen went black so I forced a restart and again the same problem.  I decided to manually disconnect the external monitor by unplugging the VGA cable from the laptop that turns on automatically to the main display as it would if I am disconnected display.  When I connected the VGA cable again the same question in the two screens were entirely black.  I unplugged once more the VGA cable if I could change the settings in Windows mobility.  I plugged back in the VGA cable after changing the settings of "external display only" to 'mirror' devices and after playing for a bit, with the Windows Mobility Center, I had the external display to work again my regular settings: "external display only.  This solution lasted a day and now works in the main screen and the external screen is completely black.
  I tried in vain to solutions:
  -Change VGA cables continues to experience the same issue.

  -Tested according to the specifications and Dell monitor Monitor works fine if the backlight is not the problem.
  -Records update for ATI Radeon HD 3200 graphics card and driver generic PnP Monitor and Dell ST2310.
  -Uninstalled ATI Catalyst Manager and re install now as AMD Vision Engine Control Center.
  -Checked AMD Vision Engine Control Center recognizes the connected external display.
  -Uninstalled the driver Dell ST2310 and re installed the driver.
  -On the screen settings have tried to extend the desktop on the external screen (second)
  Now, this is what's going on and don't know how to fix it:

  -Windows Mobility Center detects a monitor external, even when the VGA cable is disconnected.

  -When it detects the external display it sometimes detects it as DELL ST2310, sometimes as a generic Non - PnP monitor.

  -Sometimes under "Monitor" in the Device Manager, there are several monitors generic Non - PnP contained also the Dell ST2310 and generic PnP monitor.

  -When the external monitor is connected, the screen is completely black and does not work even after changing the settings Windows Mobility or Fn F4.
  Help!

  Hello
   
  I also suggest you to update the BIOS. Visit the manufacturer for more information.
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  WARNING:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  See also: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01881110&tmp_track_link=ot_recdoc/c00678157/en_us/c01881110/loc:4 & cc = us & dlc = en & lc = en & product = 352607 #N624
   
  Thank you

• My iMac screen went black, I use external display?

  MY iMac screen went out or black.

  Always a good hard drive.

  So can I use an external display to log off

  and wipe the hard drive for recycling.

  Thank you

  Yes. Here is the information on your model:

  Connection of the screen	1 mini DisplayPort
  Display modes	Double view extended and copy video
  External resolution	Up to 2560 x 1600 pixels

• rMbp mid-2014, external display with the quality of the retina

  Hello!

  I buy a Dell 24 "external display to connect to my rMBP with QHD (2 560 x 1 440) resolution.

  http://www1.euro.Dell.com/content/products/ProductDetails.aspx/Dell-u2515h-monit or? c = en & l = en & s = dhs & cs = frdhs1

  I have connected the screen to my mbp with the mini display / port cable supplied with the display screen. It works well, but I don't have quality of retina at all (the images seems good but the text is terrible)

  The text have a bad record as a retina screen, and it makes a big difference when I spend my retina display to the external display which is not comfortable at all.

  I though that this kind of screen was OK to view the retina... but I was wrong. I try to connect with minidisplay / display and HDMI! HDMI made was worse than minidisplay. The res in the system report show was good 2 560 x 1 440. I even try the hack to force with the patch, but always bad RGB render text...

  More important, I want to, it's having the same record as retina on the text and images. What external display can be good for this?

  My budget is 450-€500

  Thank you

  The size in pixels of the screen is not mean much: a small display to 2560 x 1440 pixels seems much sharper than a widescreen 2560 x 1440 pixels.

  Your retina Macbook has something like 220 dpi (DPI in English), the Dell screen only 117. If you want the same sharpness, you will need to choose a display with 220 dpi. But then, everything on the screen will look much smaller. Here is a tool that allows you to get the idea: http://dpi.lv/

• Tecra Z50 - A - 11 c: external display do not wake

  Hello

  I've got Tecra Z50 - A - 11 c and an external display connected to the VGA port.
  I implemented the plan of power management to turn off the screen after 10 minutes.

  The monitor turns off after 10 minutes of inactivity.
  The problem is that is not wake the mouse or a key.

  I have to restart the laptop to put the image on the external monitor.
  The internal display works fine.

  It seems to me like a BIOS problem, but I have the latest version of the BIOS.
  Any ideas?

  Thank you
  Jacek

  What happens if you press the function key (Fn + F5) to change the display output? This combination activates the external monitor again?
  Have you noticed the same problem using the hibernation, or "sleep" mode?

  I m not very good if it really a laptop before issuing.
  I mean the internal display still works fine and it would be advisable to check this problem using different external monitors.

  By the way: the laptop supports Intel HD Graphics 4400. Try to install the latest Intel GPU driver:
  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=3719

• Satellite Pro A110 PSAB1C: can't choose certain resolution external display

  I have Pro A110 PSAB1C-GM60XE with Intel Graphics Media Accelerator (Controller graphic memory integrated Intel 945GM Chipset) running Windows 7 Enterprise.
  Graphics driver is up to date.

  We got 20 "external monitor wide screen HD.
  When it is used as external screen it allows only up to 1280 x 1024. The display is nice streched out.

  I tried the monitor of one laptop another the same graphics card (integrated memory graphics controller Intel 945GM Chipset), also Windows 7 Enterprise.
  The same version of the graphics driver. This laptop has resolution up to 1600 x 900.

  Any ideas on what needs to be done on A110 Pro to support the resolution 1600 x 900 for the external monitor?

  Note: I've tried DTD Calculator but still the same http://software.intel.com/en-us/forums/showthread.php?t=56423.

  Hello

  Available external display resolution depends on the graphics chip and the driver graphics card.
  If the graphics chip or the graphics driver doesn t card supports the preferred external resolution, you will not be able to choose.

  It seems that the graphics chip will support this resolution.
  In such cases, it s a driver problem.

  Therefore, it would be advisable to download and install the driver from the Intel page.
  I had the similar problem in the past. The driver of Toshiba page didn t supports my favorite external resolution. I got the driver from Intel page and was able to chose him.

• Re: Tecra M5 - Windows 7 - external display problem

  Hello

  I have a Tecra M5 and now I decided to install windows 7 on it.
  Everything is ok except the external display output.
  Chosse the external display with shortcuts to windows 7 (w + P key) or Fn + F5, it does not work.
  The screen external ir well recognized, but there is no picture.
  The computer has the latest drivers from the toshiba support page.

  This experiment was done with resolutions and different monitors...

  Can you help me?

  Thank you
  Pedro Lisboa

  Hey Buddy,

  This means that your external display is recognized correctly in the menu display driver?
  Have you tried to extend or clone display in the display driver? Normally the external monitor should show a picture

  Have you checked if the other FN keys work? Maybe added package must be reinstalled to who controls the FN keys.

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Using the external display with Satellite A100-PSAA9

  I have a problem when I connect to an external monitor of 2º, it connect but next it disconect, it's always the connection and disconecting. I did update the bios and the display driver, but I still have the same problem, what can I do?

  My operating system is windows vista.

  What do you exactly mean with disconnection and connection?
  The switch to internal and external display or the display on the external monitor will simply disabled.

  Have you checked the connection to the laptop computers monitor port?

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Satellite A300 - XP SP3: how to set external display, resolution 1280 x 960

  Hello world

  I installed the latest display driver for Mobility Radeon HD 3650, but I can't understand how to set the Resolution for my external monitor at 1280 x 960 (85 Hz) - the original driver of non - Mobility Radeon ATI does not have this option.

  In addition, my A300 does not remember the setting of brightness with FN + F6 / F7.
  After windows restarts, it is once again the most.

  Any ideas / suggestions?

  Thanks in advance,

  Manulu

  Hello

  The availability of the external screen resolution depends on the installed graphics driver and the graphics card itself. If the two parties n t support this external display (1280 x 960) resolution, then you will not be able to choose!
  See the user manual for this if the GPU provides support for this resolution of the external display (1280 x 960).

  Regarding the brightness setting:
  If the laptop is connected to the adapter, the brightness of the display will return to the optimum brightness. But you can manage these display settings in power management.
  There, you can create a profile for certain situations, for example when the laptop works with the energy of the battery only
  In this power profile, you can assign different levels of display brightness.

• T440p and external display

  I'm having a problem find Lenovo T440p with HD4600 and Eizo S2100 work as an external display. I was able to get it work only with resolution 1240 x 1024 however monitors maximum is 1600 x 1200.

  The operating system is Windows Pro 8.1.

  Connection between these two is via a Dock Pro and DVI - D cable.

  I've tried 5 different drivers of Lenovo and Intel, but not luck.

  

  Any suggestions?

  Hi vacancies,

  the latest drivers directly from Intel has solved my problem.

  You should try it too. The release date of this driver is 20.11.2013 and version no. 15.33.8.64.3345 (10.18.10.3345).

  According to my information to support Eizo was a problem with the wrong frequency for this resolution.

  Kind regards
  Matus

• Hard drive (external), that the Go is not what I ordered.

  I am a new Member to the forum and with computers.  I bought a new Iomega, drive external hard 250 GB of dell, however, when I plugged in the computer it is only display 232 GB, is this something I should be of concern on?  What is the problem?