Structure of hybrid data - relational & structural using the XML file

Similar Questions

• Center aligning images in table using the XML file

  Hello
  I use a flash file that uses an xml file to download a series of images one by one in a photo-gate.
  There are two different widths of images. The height is always the same. Is it possible to set up so that each image that calls file xml is center aligned as part of image.
  At the present time when using the xml file to load the image she always left aligns the image when he brings it in image even if you change the alignment to center align in the Panel align.
  Does anyone have a suggestion why this happens or how to fix it?
  Thanks for the help

  I did this quickly and did not test - but if it does not directly at the exit it might give you a starting point - or someone else can correct if there are errors. I'll check tomorrow - where I am its time to go to sleep...
  CHANGE the DETAILS: Just changed a few pieces of code I posted last night - I forgot to change the statement holder_mc.loadMovie in xml.onLoad Manager. I have not tested, but its along the lines of the approach I would use to solve your problem with resizing the image. Let me know how you go with it.

• Using the XML file error

  Hello

  I use an XML file as the source in a map. This worked well until I changed the context during the execution of the mapping.

  Initially, during the execution of the development, it worked without any problem. But when I changed the context to run the Test, he gave me the following error:-

  ODI-1227: task load data-LKM SQL for Oracle-don't work not to connect to the source P6_ACTIVITIES - TEST.

  Caused by: java.sql.SQLException: the object name already exists: P6ACTI_READACTIVITIESRESPONSE in the statement [create table P6ACTI_READACTIVITIESRESPONSE (READACTIVITIESRESPONSEPK NUMERIC (10) NOT NULL, SNPSFILENAME varchar (255) NULL, SNPSFILEPATH varchar (255) NULL, SNPSLOADDATE varchar (255) NULL)]

  This object name, P6ACTI_READACTIVITIESRESPONSE created by ODI is a combination of scheme name defined in the JDBC URL properties (or the first five characters of the XML file) and the element root. Therefore, I don't have any control over the name, unless I have change the schema name property.

  Restart the agent will solve the problem temporarily, but the error will appear again when the context is changed. My question is, how do I create/drop / let agent do this each time that the XML file is accessed ODI. I use ODI 12.1.3.

  Thanks in advance,

  Xmen

  Only, you should be able to query code KM to understand if these tables are created, but generally it will be in the scheme of work specified on your server of intermediate technology.

  We are not allowed to change the KMs, because it would create problems of alimony.

  
  

  Who with Oracle or internally? A large part of ODI power lies in an open framework around KMs and as long as you develop and test carefully any customizations KM I really can't see why the support would be a problem. You can run the table to fall outside the knowledge module, would be - this also be a support issue, the main difference is that a KM custom allows to reuse easier?

• Create an image slider using the XML file photo gallery

  Hello!

  I have created a photo gallery and generated an xml file.  I want to implement a cursor image on the home page that performs a simple fade from one image to the other.

  I'm not an expert on jQuery. The BC help section says to add code that retrieves in the XML file and THEN add another code query j who would style images and transitions.

  I don't know how to do this.  Here is my code and it does not work.

  If you have a simple solution, it would be great.

  There is a script called JSSOR

  "< script type =" text/javascript"src ="... / js/jquery-1.9.1.min.js "> < / script >"

  <!-use jssor.slider.mini.js (40 KB) instead for immediate release->

  <!-jssor.slider.mini.js = (jssor.js + jssor.slider.js)->

  < script type = "text/javascript" src = "javascripts/jssor.js" > < / script >

  "< script type =" text/javascript"src="javascripts/jssor.slider.js "> < / script >

  This is the beginning of the code BC gives to pull from the xml file into a div called "Gallery".

  < div id = 'Gallery' > < / div >

  < script type = "text/javascript" >

  {$(function()}

  $.ajax({)

  type: 'GET ',.

        url: " http://www.performanceaire.com/Fahrenheit-images/BannerGallery/Photogallery.XML ", / / replace with an absolute URL of the XML of your gallery of .

  data type: "xml."

  success: {function (xml)}

  {$(xml).find('img').each (function ()}

  location var = ' http://www.performanceaire.com/Fahrenheit-Images/BannerGallery/'; / / Replace with the absolute path to the directory that contains your images

  var url = $(this) .attr ('src');

  var alt = $(this) .attr ('alt');

  $('<li></li>').html (' < a href = "' + place +" + url + ' "> < img src ="' + place + "+ url + '" alt = "' + alt + '" / > < / a > ').appendTo('#gallery');

  });

  }

  });

  });

  This is the code taken from JSSOR to transitions occur, and it does not work... any ideas?

  jQuery (document) .ready (function ($) {}

  var options = {}

  $AutoPlay: true, / / [optional] If auto play, to activate the slide show, this option must be set to true, the default value is false

  $DragOrientation: 1 / / orientation [optional] to drag the slide, 0. drag, 1 horizental, 2 3 vertical or, default value is 1 (note that the $DragOrientation must be the same as $PlayOrientation when $DisplayPieces is more than 1, or in the parking position is not 0)

  };

  var jssor_slider1 = new $JssorSlider$ ("Gallery", options);

  });

  < /script >

  www.performanceaire.com/index-FS.html

  It is perhaps a bit much if you do not top:

  Developers

  http://www.BusinessCatalyst.com/BC-blog/BC-next-liquid-rendering-JSON-new-editing-capabili links-increased-performance

• Automation of several Flash file by using the XML file 'mailing list '.

  I created a Flash interactive multi-fichiers 'demo' for a client. It is very well as a Web site (although he doesn't use it as a Web site) in the way it is stated that there is an index page which can then direct you to product categories, which you can click to see. Each 'page' contains the product (or product category) information, photos, diagrams, etc. There is nothing of Flash animation.

  My client also wants to be able to put in place so that the demo runs automatically in a configurable XML file. My ActionScript skills are fairly limited, but I was able to by using ActionScript 3 to load and read XML file. A loop using 'for', I am able to read the XML file and returns the path of each Flash file and the time that each file must be displayed (my client asked that he able to configure the duration of each page as well).

  I created a charger for each video clip and a timer for the duration. Unfortunately, the thing that throws me off is that when I try to load the clip (as the last element in the loop for), it reads the entire XML file, returns all the clips and the durations (I use trace to see this) before loading the clip. Thus, the single loaded clip is the last reading of the XML file.

  As I said, I'm not very good at ActionScript, so everything I managed to combine was internet tutorials.

  This is my code:

  var xmlLoader:URLLoader = new URLLoader();

  xmlLoader.addEventListener (Event.COMPLETE, xmlLoaded);

  var mcLoader:Loader = new Loader();
  mcLoader.contentLoaderInfo.addEventListener (Event.INIT, playClip);

  var mcCurrent:MovieClip = new MovieClip();
  stage.addChild (mcCurrent);

  var xml;

  function playClip(e:Event):void
  {
  trace("Function:playClip");
  stage.removeChild (mcCurrent);
  mcCurrent = MovieClip (mcLoader.content);
  mcLoader.unload ();
  stage.addChild (mcCurrent);
  }

  function xmlLoaded(e:Event):void
  {
  trace ("function: xmlLoaded");
  XML = new XML (e.target.data);
  
  var cl:XMLList = xml.clip;
  for (var i: uint = 0; i < cl.length (); i ++)
  {
  trace ("Begin"for"loop");
  trace ("variable" i "is" + i);

  clipPath var = cl[i].@path;
  var delay = cl[i].@duration;

  trace ("Clip path is" + clipPath);
  trace ("Display for" + delay);
  
  mcLoader.load (new URLRequest (clipPath));
  }
  }

  xmlLoader.load (new URLRequest ("filerunlist.xml"));

  
  I removed the timer event because, like all the rest was repeated until whatever it is obtained, so I wanted to figure out out to get the charger clip (mcLoader) to load the clip for each file, before I realized where put in the time to make sure each element is displayed for the appropriate duration. I suspect that the timer event must occur in the function "playClip", but that it would take advice on that as well.

  Thanks to anyone who can help me understand this.

  You need to do in the service of parsing xml is just to store all data in a table.  You will use while an array element after another through some timer control you set up, access each file in the order that they are stored in the table.  You do not load in this function, all data storage, and when finished, the last line of this function outside the loop, fires at any function you have who begins to treat the first element of the array.

  For example, to store the data objects in the array...

  var clipData:Array = new Array();   store your data xml here

  var clipToShow:uint = 0;                   use later in the function showClip

  function xmlLoaded(e:Event):void
  {
  trace ("function: xmlLoaded");
  XML = new XML (e.target.data);
     
  var cl:XMLList = xml.clip;
  for (var i: uint = 0; i
  {
  clipArray.push ({clipPath: cl[i].@path, delay: cl[i].@duration});

  }

  showClip();
  }

  function showClip() {}

  Regardless of the process of loading .clipPath clipArray [clipToShow]

  and using clipArray [clipToShow] .delay to start some timer is involved

  the timer handler function calls this function when it is run

  clipToShow += 1;   increment the counter for the next clip online

  }

  If you are not comfortable/familiar with the approach of the object, then you could also store the clip and delay data in two separate tables.

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)

• Load data into Essbase using the rules file

  Hello
  
  IAM trying to create a rule to load for the fresh Essbase cube associated with the Hyperion Planning Application.We having 14 Dimensions (including the HSP_Rates Dimension).
  
  The falt file used to generate the rule file has columns related to the 13 dimensions as well as the data as the 14th column column. When I validate the rules file, he said "the rules file is correct for the loading of the data.
  
  My concern here is iam not taking care of Member Dimnesion related to the Dimension of "HSP_Rates" (not even as the Difinition of the header). I'm doing something wrong here? How validation can MOVE independently without taking into account one dimension?
  
  If I insert the data, while recovering the data in Excel which dimension member HSP_Rates should I use?
  
  Any response is greatly appreciated.
  
  Thank you
  RNG

  Hello

  You should charge against 'HSP_InputValue' in the HSP_Rates dimension, i.e. where the input values must be loaded.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Clone several nodes and appl_top shared using the XML file backup

  Can I use work save file of application context to repeat the clones and avoid to perform following steps:
  
  -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile = < context of Applications for the existing node file >' and ' perl-I < AU_TOP > / perl txkSOHM.pl"orders ")
  
  If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

  ma_apps wrote:
  Can I use work save file of application context to repeat the clones and avoid to perform following steps:

  -Configure the node C (run '"perl adclonectx.pl sharedappltop contextfile =' and 'perl - I /Perl txkSOHM.pl"orders)

  If I work the previous clone XML, I would be able to use the same XMl file for re - clone without implement shared appltop and add a node step. Please, share your ideas.

  You should be able to use it. However, according to the Oracle docs support is to clone the main node and add more nodes by cloning the context files.

  Cloning Oracle Applications Release 11i with rapid Clone [ID 230672.1]
  Sharing the Application Tier file system in Oracle Applications Release 11i [ID 233428.1]

  Cloning Oracle Applications V12 with rapid Clone [ID 406982.1]
  Share Application-level file system in Oracle E-Business Suite Release 12 [384248.1 ID]

  Thank you
  Hussein

• The attached VI works when I run it initially to create the XML file, but by pressing once the XML file is created, it is not up-to-date. What I am doing wrong?

  The attached VI works when I run it initially to create the XML file, but when I change the data and run once the XML file is created, it is not updated with new data. What I am doing wrong?

  Thank you.

  It sounds like the logic that has been written in VI

  Internal decision of true / false:

  (file exists: false) write in the file XML, unflatten for display

  (file exists: true) read the XML file, unflatten for display

  At no time when the file exists (true case) is the XML file updated...

• How to add URL links in the XML file?

  Hello

  I have a problem with adding the URL links to the power of lightning. I use the XML file to call images, then the corrsponding links. Images are called correctly but when I try to add a link I do not receive the links, but rather to get the anchor HTML text tags. I use escape XML characters to escape HTML tags, but the results are not what I need.

  I use the following code:

  < preview = "miniature large.jpg" thumb = "thumb.jpg" > "
  < title > <! [CDATA [Financial Services]] > < / title >
  < discription > <! [CDATA [& lt; a href = & quot; ]] http://www.google.ca "> Google < / a > " [[ ]] > < / discription >
  < / thumbnails >

  ---------------------------

  Output:

  Images are displayed correctly, but instead get the links, I get following message:

  " < a href =" http://www.Google.ca "> < /a > Google .

  I need to know what I'm doing wrong. I use the proper way to add links or not?

  Thanks for your time.

  Use tags html directly inside CDATA - after all, what CDATA is for.

• How to extract information from tree logical structure using the PDF Library?

  How to extract information from tree logical structure using the PDF Library?

  Adobe's PDF Library has PDSEdit APIs to extract information of the logical structure of a tagged PDF file.

  But I couldn't find any example code to demonstrate the C API on PDSEdit layer.

  I google search using different keywords, find none.

  I contact datalogics (which gives me the evaluation of adobe PDF library copy), no code sample on APIs PDSEdit yet.

  Everyone knows any code example can demonstrate extract structure logic tree information PDSEdit APIs (in C/C++ or Java)

  from a tagged PDF file? And is there any sample to demonstrate that connects a tagged logical tree contained in the content stream?

  I thank very you much in advance!

  logicaltree

  Did you look at the code snippets in the SDK?  There are a bunch of samples to work with PDSEdit and structure/marking.

• How to extract data using the xml data type

  Hello
  I tried the following example using the xml data type, but not the desired output.
  could you please correct the query in order to obtain the necessary
  

  CREATE TABLE TEST.EMP_DETAIL
  (
    EMPNO       NUMBER,
    ENAME       VARCHAR2(32 BYTE),
    EMPDETAILS  SYS.XMLTYPE
  )

  Insert into EMP_DETAIL
     (EMPNO, ENAME, EMPDETAILS)
   Values
     (7, 'Martin', XMLTYPE('<Dept>
    <Emp Empid="1">
      <EmpName>Kevin</EmpName>
      <Empno>50</Empno>
      <DOJ>20092008</DOJ>
      <Grade>E3</Grade>
      <Sal>3000</Sal>
    </Emp>
    <Emp Empid="2">
      <EmpName>Coster</EmpName>
      <Empno>60</Empno>
      <DOJ>01092008</DOJ>
      <Grade>E1</Grade>
      <Sal>1000</Sal>
    </Emp>
    <Emp Empid="3">
      <EmpName>Samuel</EmpName>
      <Empno>70</Empno>
      <DOJ>10052008</DOJ>
      <Grade>E2</Grade>
      <Sal>2530</Sal>
    </Emp>
    <Emp Empid="4">
      <EmpName>Dev</EmpName>
      <Empno>80</Empno>
      <DOJ>10032007</DOJ>
      <Grade>E2</Grade>
      <Sal>1200</Sal>
    </Emp>
  </Dept>
  '));

  I need to get the record for Empid = '2'
  Then tried the following query with no expected o/p

  SELECT a.empno,a.ename,a.empdetails.extract('//Dept/Emp/EmpName/text()').getStringVal() AS "EmpNAME",
       a.empdetails.extract('//Dept/Emp/Empno/text()').getStringVal() AS "EMPNumber",
        a.empdetails.extract('//Dept/Emp/DOJ/text()').getStringVal() AS "DOJ",
        a.empdetails.extract('//Dept/Emp/Grade/text()').getStringVal() AS "Grade",
        a.empdetails.extract('//Dept/Emp/Sal/text()').getStringVal() AS "Salary",
        a.empdetails.extract('//Dept/Emp[@Empid="2"]').getStringVal() AS "ID",
        a.empdetails.extract('//Dept/Emp[EmpName="Coster"]').getStringVal() AS "CHK"
       FROM emp_detail a 
       where empno=7  
             AND a.empdetails.existsNode('//Dept/Emp[@Empid="2"]') =1

  Thank you...

  Karthick_Arp wrote:
  I'm not very good at that... But if your XML code should not be more like this

  SQL> Insert into EMP_DETAIL
  2     (EMPNO, ENAME, EMPDETAILS)
  3   Values
  4     (7, 'Martin', XMLTYPE('
  5    
  6      1
  7      Kevin
  8      50
  9      20092008
  10      E3
  11      3000
  12    
  .. cut ..
  

  Why? It is perfectly valid to data as attributes rather than elements and also quite common for key values.

• using the .ini file created by EXE

  First of all I would like to say that I have a thorough knowledge of the .ini files and the need for them.  My question is related specifically to the .ini file that is created with the executable.  I searched the forum but have not found any instance of my question specifically.  After installation, the .exe and .ini are placed in my working directory in Program Files, which I expected.  The .ini file that is created is attached.

  Now, I would like to point to a different .ini that stores control settings.  I did it in the App generator under Advanced > Use Custom Config File.  That's fine and dandy, but the network, web, settings etc that have been created in the original .ini does not get included in my new .ini.  If my option is to use an .ini file separated with my control as well as created by the .exe parameters.  This seems redundant.

  My question is: does nothing my executable with the .ini file that is created when it starts to run?  I'd be OK NOT to have attached items if I wanted to point to a custom .ini file?  Why create an .ini with these specific settings file if the .exe does nothing with them?

  The only article I found is this one

  http://digital.NI.com/public.nsf/allkb/5467F7D7895835C186256FAF00600A21?OpenDocument

  but it does not explain what the .exe is done with it, if anything.  I guess you have a total control over the .ini and there is nothing "automatic / backstage" going on here.

  Thanks in advance for your help.

  Why remind you the application builder to a custom INI file if you are going to have to read the chips inside manually anyway?  The reason to use a custom within the app Builder INI file is so that you can include specific parameters of execution (VI, access list server, port etc.) which are different from the settings using the LabVIEW development environment.

  You need not key in the INI file for your run-time application (as evidenced by the fact that if you delete the INI file, your exe will still works, creating a new INI file with default values).  If you leave the defaults, the application adds in the first leg in any case.

  You can store your own data in the same INI file used by the executable file; just put the keys in a different section.  LabVIEW Config File format INI files screws slightly differently (for example adding spaces around the = sign), but I didn't know it causes problems.

• Cannot read the CD after you have used the active file system

  I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.

  After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc.  When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.

  If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.

  Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.

  Thank you!
  Bob

  Hello

  Check the drive in another computer, better check in several. CD and DVD door, especially
  RW. If the question with a single disc? There are companies that may be able to recover the
  data if it is quite expensive.

  Very good idea to have redundant backups.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Get errors when using the xml parsers in my client application.

  Hello

  I use JDE 4.5.0, Jdk 1.6.  In my application, I need to read the xml data so I used the packages below

  import java.io.File;
  Import javax.xml.parsers.DocumentBuilder;
  Import javax.xml.parsers.DocumentBuilderFactory;
  to import org.W3C.DOM.document;
  Import org.w3c.dom.Element;
  Import org.w3c.dom.Node;
  Import org.w3c.dom.NodeList;

  But when compiling it's show

  Cannot resolve symbol
  symbol: DocumentBuilderFactory class
  location: packet analyzers
  Import javax.xml.parsers.DocumentBuilderFactory;

  Cannot resolve symbol
  symbol: class file
  Location: package io
  import java.io.File; ...............

  Same type of java file that uses similar packages is correctly compile another IDE (Editplus). That's why show this compilation errors.  I scoured the forums of Sun they mentioned that "XML support is build in the JVM 1.4 and later." No need of extra pots.  How do I set this compilation errors.

  Please give your suggestion, thanks for the tip for the same thing.

  Kind regards

  Sunil.G

  Thanks for your reply MSohm.

  In my class used resulting classes that the errors below.

  Import javax.xml.parsers.DocumentBuilder;

  Import javax.xml.parsers.DocumentBuilderFactory;

  now instead of what I used

  Import net.rim.device.api.xml.parsers.DocumentBuilder;
  Import net.rim.device.api.xml.parsers.DocumentBuilderFactory;

  reading file, I use (instead of java.io.File)

  InputStream inputStream is getClass () .getResourceAsStream (_xmlFileName);.
  Doc document = db.parse (inputStream);