Stuck in an infinite loooop!

Similar Questions

• Ati32dvag.dll BSOD and driver is stuck in an infinite loop on Tecra

  Hey

  Can someone help me with this strange problem. I have an ATI X 600 128 MB graphics card and he is stuck with sometimes a blue screen and a following stop code: STOP: 0X000000EA (0X85B1ECB8, 0XEBF93CB4, 0X85696B38, 0x00000001) and he said that the ati32dvag.dll of the driver is stuck in an infinite loop.

  I ve tried to reinstall - just uninstalled and reinstall again, and it s always the same. Hope someone is able to help him because I ve starting to hate my computer.

  Stefan

  You said it seems sometimes. Eventually, when you play some heavy games and the laptop gets hot?

  As feliks says that you must use the graphics driver Toshiba because I heard that this driver has been slightly changed and supports a graphic protection against overheating

• Satellite C660 stuck in an infinite loop of BSOD after upgrade to win 10

  Wow what a disaster, this is a machine under windows 7-32 bit Satellite C660 PSC1GA-01E01M stuck in an infinite loop of BSOD.

  The lappy said that it was ok to upgrade to windows 10 so... Yes, I did.
  Now its stuck in a loop without end of BSOD.

  So I decided to use the recover option and reinstall windows 7 and then move from there.
  After mega downloads updates and finally got to the stage where there was no update on the left to get, so I decided to upgrade to windows 10 even once.

  Now stuck in an endless loop of BSOD again.

  Can someone point me to the driver who is a failure, I can get into SafeMode ok, Device Manager has 2 problems

  (1) is under OTHER DEVICES is an unknown device
  (2) is generic pnp monitor

  I tried from Toshiba Web site for updates of drivers for 32-bit windows 8 thinking this could be the best step but the links are bad and the page Web said sorry loser at home...

  Also no network, if I try to logging for the safe mode with networking, he returned to the screens of BSOD...

  HELP PLEASE

  Toshiba has released a list with all Toshiba models supported for upgrading to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Satellite C660 PSC1GA is not in the list, which means that this model is not supported to win 10 and will not get win 10 drivers.

  However the Win 10 must run on this device, because it meets the essential physical requirements.

  I guess the BSOD loop arise due to some drivers which are not entirely compatible Win 10 and probably these drivers must be removed before making the Win 10 update.

  To check the compatibility follow this procedure:

  • Right-click on the icon 'Get Windows 10' (on the right side of the taskbar), then click on "Check the status of your upgrade".
  • In the app to get Windows 10, click on the menu: (3 lines) and then click on "Check your PC.
  • Now you should see the list of compatibility issues

  Also this kind of problem could be fixed by Microsoft update, as mentioned in this article:
  http://www.Forbes.com/sites/amitchow...s-reboot-loop/

• Microsoft Silverlight is stuck in an infinite loop

  This morning I got an error message telling me that I needed to uninstall and reinstall Silverlight of Netflix. I deleted all the files on my computer and went to reinstall. After reinstallation, I was told that I could not reinstall because a new version of Silverlight is already installed. I'm stuck in an infinite loop of H E L L. Microsoft seems to only provide help for Windows users. I'm running on a Macbook OS 10.6.8 with 4 GB of memory. So, it is not a question of space or an OS problem. I don't know what is happening! Please advise!

  Hi Ari,

  I suggest you post your question in the Microsoft Silverlight forum and check if it helps.

  http://forums.Silverlight.NET/

• After downloading recently some 60 more Windows updates that me seems to be stuck in an infinite loop restart your computer.

  * Original title: download Windows updates

  After downloading recently some 60 more Windows updates that me seems to be stuck in an infinite loop restart your computer.

  Download the historical State successful but may need to restart.   Several attempts to restart always end with reboot so unable to see if other updates are available.

  Windows Update does not work

  This is a very common problem lately.

  Download and run the appropriate version for your system from the system update readiness tool.  System 32-bit X 86 must https://support.Microsoft.com/en-ca/KB/947821.  System 64-bit X 64.

  As a general rule, the following rather simple and fast process should be.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-problem-error-code-80080008/de8114b5-1487-4B31-9b28-f11974718df1?auth=1  This thread has essentially lists a series of commands that I found generally fixed WU.

  Start, all programs, accessories, right-click on command prompt, select run as administrator, OK.  Type the following in the black box:

  1. net stop wuauserv
  2. net stop cryptSvc
  3. net stop bits
  4. net stop msiserver
  5. Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution
  6. Ren C:\Windows\System32\catroot2 catroot2.old
  7. net start wuauserv
  8. net start cryptSvc
  9. net start bits
  10. net start msiserver
  11. pause
  12. Output

  Services of type in the text box above the start planet.  Find each of the following items and make sure they are set to automatic: Intelligent Transfer in the background, cryptographic, Windows Installer, Windows Update services.  Double-click on each item and choose automatic.

  Now restart Windows Update.  Do NOT restart Windows.   Be very, very sick, it will probably take a while.

• Laptop stuck in an infinite loop "install".

  My HP laptop acted until tonight while I was using it, so after trying simply to cold restart for a few minutes, I gave up and decided to just refresh everything. However, the preparation part took longer that it was supposed too once again, I did a cold reboot to see if the process would go faster. But now my phone is stuck in an infinite loop where it indicates an unexpected reboot or error happened past that he cannot continue the 'install' and must restart so it can relaunch the 'installation '. However it is done a few times and each time, the same error appears. I tried searching how to solve this problem, but did not see anything and that's the current situation, I can't use it for stuff I need the laptop for. I don't know what to do!

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that your notebook has been slain in the loop of the installation. I will certainly help you to question.

  I suggest you refer to the suggestion of Reda Singh replied on 30 June 2015 from the link below and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-81-wont-start-correctly/211c93ea-8ce1-430B-9ca1-1f7b245cf0ca

  Hope the helps of information.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• Stuck on the infinite loop of auto repair

  Hi guys,.

  Ive had a problem with my computer. I have the alienware aurora r4 and have and issue with blue screen and auto repair mode.

  The real problem is really the mode of auto repair. What happened is that when I did a windows update it ended to give me a bluescreen during loging screen when I start the computer. After 3 restart put me in auto repair infinit loop and since then I can't get out, not even will lauch and im safe mode don't really know what to do.

  There is no problem of harware, I run the ePSA to confirm this. but the main reason is that it is the second time this has happened to me. the first time windows upated this month he did the samething, but I would get blue screen after login. How to solve this problem the first time, is that I restore my system to a certain date, when I didn't have this problem. After this, I turn off the windows upadte until I get more information one why its done 2 days ago, it is accidentally turn on by my antivirus or maybe accidentally by me.

  Now it is stuck on this infinite loop for auto repair and I can't do a system files because it must be done in safe mode, or need to disable launch beginning of antivirus (not exacly how his writings sound penultimate option aloong SafeMode in windows 8.1)

  What I have to do is stop mode auto repair, so that I can operate either in safe mode or disable the antivirus at the beginning so that I can restore my computer to a day where it was working fine. The computer has access to the command prompt, so any code that can disable or ask the system that he has never mistake might help.

  There is a file that I really need to recover from this computer and also need to use this machine. Any help is appreciated

  Thank you

  You can get a better response if you re - post it in the forum of the Microsoft OS.

• Satellite U840 PSU4SA stuck in an infinite loop of Boot

  I really hope someone can help me.

  My wife's cell phone is stuck in a boot loop which is continuous.

  When you press the power button, the Toshiba logo appears, and then it goes to the screen of the BIOS with the following information;

  "The operating system has not stopped cleanly.
  Reconstructiong Metadata Cache.
  Please do not interrupt this process.

  Reading packaged metadata in memory... Fact.
  Processing the record Delta... 1 "

  .. .and then it dies, returns to the Toshiba logo and repeats. Ad nauseam.

  I tried to start in safe mode by pressing Fn + F12, nothing helps. I took the base of the laptop to try to remove the battery but I am no expert of PC hardware, and I didn't ruin it.

  All specifications are; Toshiba Satellite U840
  Part No. PSU4SA - 015005
  Windows 7 64 bit Home Premium.

  I have Linux Mint, installed on a USB key. I would like to boot from USB (no CD/DVD-RW in this ultrabook) to retrieve the data if possible.

  Should I remove the SSD and HARD drive? I have read a few forums who say that often have Windows 7 on the SSD can cause this problem.

  Hello

  Try this workaround:
  Power of the device and press F8 key up
  Now the advanced boot menu should appear where you can choose between different options.
  I recommend you try the option last good known configuration.
  If this does not work, try the option: my computer repair.
  Here, choose the first option above.

  Of course start from the live Linux USB flash memory stick would allow you to get access to data and back up important files.

• Stuck in an infinite loop of update. Help! XP Media V. 2002, SP2.

  I'm still stuck on this update:

  Installation of Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 (update 1 of 1)...
  Wen I try to restart it says don't not to turn off my cell phone, but the update will not be completed. After hours of waiting, my only option is to power off the coast. No matter how many times I restart or go to Windows Update, I can't go past this update.
  Help, please.

  I am running XP Media Center Edition Version 2002 Service Pack 2.

  Thank you!

  You will probably need to remove the .NET Framework and repeat - use it as a guide

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Order of installation:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  If it's only .NET Framework 3.5, then use the tool to remove it and use Windows Update as a guide for the resettlement of the .NET Framework 3.5 and updates.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• stuck in an infinite loop to lock the Explorer

  This is the biggest problem of vista, that I have had since I started using the new 07

  I did accidentally drag a folder and the left edge of the desktop to create a toolbar in the process
  I didn't know this feature before and thought it was great... but then I dragged accidentally the same folder in this toolbar, creating a sort of infinite loop. Now explore keeps freezing upwards and restarts every 10 seconds... even after several reboots and safe mode

  I say to myself that I could remove this folder on the desktop to solve this problem, but explore crashes as soon as I touch anything on the desktop. Everything else, including firefox, sounds good, but how you can use windows without exploring right?

  any help will be appreciated

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  If you can get in the face of this problem, System Restore should put everything back to normal. You may need to use the floppy start-up or a recovery disc to access this option.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps from another computer or on the problem if you can get into safe mode with network and it doesn't have the same problem).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Download the file stuck in an infinite loop dialog box

  I tried to download a file (from a reliable source) to install a program. I spoke with the editor, and no one else has had this problem with this link. That's what I did:
  Clicked on the link in the email that was sent
  This brought to the top of the downloads dialog box view.
  He asked if I want to run or save CWSetup.exe.
  I clicked on run
  Which brought up another view downloads dialog.
  He asked me if I want to run or save IEExplore.exe. If I click on one or the other, it brings just downloads to see another who says the same thing.
  Even if I just let it sit there, she just keeps raise dialog boxes of download of view with other program names and I don't know what they are.
  If I try to open a program like Outlook, I get a download dialog box view outlook.exe has (run or save). This happened with most everything that I try to run so I can't do anything at all. Even things in the control panel. He just keeps go into an infinite loop of view download dialog boxes. Most of the icons on my desktop program are now just the Internet Explorer icons and not the pictures they were.
  My computer had no problem until the moment where I clicked on run in the download file dialog box. It's now like any .exe I try to execute triggers the download for ip dialog box.
  So I can't do anything because I can't run Outlook or Explorer or most any other program. some run. I use my iPad to email because my computer is now completely useless.
  Do you have any suggestions?

  Hi Shannon,

  Thanks for the reply.

  Given that the problem persists, you must follow the manual steps described in the article to change the registry settings.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  Important: The article mentioned above also contains to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, see the article:

  Back up the registry

  If please reply and let us know if you need help to solve the problem and we will be happy to help you.

• Firefox broke Gmail and now stuck in an infinite loop

  Firefox tells me that Gmail is not approved. In addition, I click on "I understand the risk to add an exception and he tells me that the certificate is valid, so I can't add an exception, then it sends me to the page"the site is unreliable".»

  The only thing that changes is that my laptop comes back from repair (I kept the HD). Everything else is fine.

  I tried the advice in other articles about the clear cache, delete cookies.sqlite and all without result.

  Another thing, maybe in a relationship, my ISP has done some major repairs on "International connections" and the Mozilla site also came with a certificate of caution as well. It was also discussed on my phone. Yet, strangely, Gmail works fine on my phone.

  Check the Date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar

  • Date and Time Properties -> go to The Internet time --> select automatically synchronize with a time server Internet
    
  • under Server , select time.windows.come and click on the update now button
  • Click OK

  Check and tell if its working.

• Firefox stuck in an infinite loop to restart to complete the previous update but does nothing. Can uninstall or install the latest version over it. In my view, that the installation files have been erased before reboot by another Installer. How can I f

  Everything I try associated with firefix gets "your computer must be restarted to complete a previous update of Firefox" I tried to not restart no luck, I tired uninstall in Add Remove programs or install 4.0 on it. At the time I was trying to upgrade 3.0 to 3.6.15. I tried to look for the xpicleanup.dat file but no luck there.

  Any suggestions to get firefox back on

  I had the same problem. I deleted a file "firefox.exe.moz" - upgrade directory "C:\Program Files\Mozilla Firefox" and the installation / update of Firefox went on well

• iPad Mini 2 disabled, stuck in an infinite circle of Hades.

  iPad Mini 2, iOS 9.0

  Mac OS X 10.7.5 (latest version supported by my computer).

  MacPro 2, 1 A1186, 2 x 3 GHz Quad-Core Intel Xeon, 16 GB

  iTunes 12.2.2.25

  My daughter is constantly changing (if all goes well, she learned her lesson) the password on his iPad Mini 2. Needless to say that the iPad is now disabled. WiFi is disabled on the iPad, so I can't use iCloud / #find to clear the iPad.

  The iPad says: "connect to iTunes".

  iTunes says: "iTunes could not connect to the iPad 'IPad of the Samis' because it is locked with a password." You must enter your access code on the iPad before it can be used with iTunes. »

  

  So they themselves reference each other. The first time I plugged the iPad to the computer he did a backup and synchronization, as well as download the latest update (iOS 9.1) for the iPad, but neither would allow me to unlock the iPad, and now I get the errors above with no sync/backup.

  I put the iPad in recovery mode and iTunes asks me if I want to update and restore, when I say yes it gives the following error: "iPad"iPad"could not be updated. This device is not eligible for the requested build. »

  

  Any help? Yet once again, the DFU mode AND recovery do not work, WiFi is off so find iPhone does not work.

  Thank you!

  Have you tried: If you see error 3194, error 17, or "this device is not eligible for the requested build" in iTunes - Apple Support ?

• Infinite loop - Restrictions PIN forgotten, can't stop to find my iPhone for restoration

  I have an iPhone 6 for my children. I forgot the PIN code for restrictions affecting. When you make selections for the restrictions, I put it that nobody could change anything without my PIN entry for restrictions. So, it would mean that 'Find my iPhone' cannot be disabled without knowledge of the PIN for restrictions.

  The easy solution is to restore the phone. However, in order to restore the phone, I received instruction to turn off "find my iPhone". So, I'm stuck in an infinite loop. I've seen several recovery programs, but some lead to links that were not there, others have asked me to pay for the program, and others seemed questionable.

  Any suggestions would be welcome. Thank you.

  You have to force into recovery mode to restore.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports