Stuck in the loop of infinitr device driver?

Similar Questions

• Lenovo Y410P was stuck in the loop of auto repair, but it came out

  So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

  TookMeAWhile wrote:

  So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

  Check the system for corruption files by running sfc/scannow in an elevated command prompt.

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

• Mail stuck in the loop. Cannot access same Mail preferences!

  Hello to you all. Can anyone help? I'm trying to set up Mail (in lieu of Thunderbird) I want to use the possibilities of synchronizing with Mail on my other Apple devices. The title says it all, and I have attached a screenshot of what I see. Impossible to do anything, except to force them to leave cannot even open Mail preferences! I'm on iMac with El Capitan Version 10.11.3 Mail Version 9.2 (3112). Henry

  

  Hi Aitchb65,

  Thank you for your participation in the communities of Support from Apple.

  I see that the mail is stuck in a loop and the opening of many windows unexpectedly. Try to run Mail in 'safe mode' by following these steps:

  Open Mail and immediately hold down the SHIFT key until the Mail is opened. This causes the Mail to open without any message or box to the selected letters.

  Of Mail if closes unexpectedly when displaying certain messages.

  If the Mail normally opens, try to update your SMTP settings -Mail (El Capitan): list of outgoing mail server settings.

  You can also delete email accounts in Mail preferences and start over after export and save all important messages. To help in this part, see Mail (El Capitan): Configure Mail with your email accounts and Mail (El Capitan): import / export the mailboxes.

  Sincerely.

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• Satellite C660 - 115 Win7 update stuck in the loop. SOLVED!

  I have a Satellite C660-115 which is stuck in a loop "of despair".
  I am a COMPUTER engineer support and a customer brought this laptop of mine, who was stuck in a loop of repair Win7 (64-bit prem) that simply says Win7 could not be repaired.

  I backed up the profiles of subscribers using Hiren boot CD (done chkdsk as well - everything is OK), and then did a factory restore.
  No problem at all with the restoration.

  Started doing the updates for Win7; SP1 seems to install OK without errors.
  The system then picked up 37 Win7 updates automatically and asked to reset.
  Upon reboot, Win7 entered "drvload.exe" and started an auto repair.
  It took time and the system started OK, but without any sign of SP1, looks so much like system restore to an earlier point?

  I though this update to process 3 times now and each time after that a lot of auto update, the same sequence occurs.

  How to exit this loop? What is causing this problem, which I have never seen before?

  No software has been installed, other than that of the recovery process.
  I even uninstalled McAfee, just in case this could be a problem - no change.

  Ah, just took another look. It is stated in Win7 system registers that the restoration was caused by a corrupted file C:\ci.dll. Google to find it was a sign by a rootkit virus in the HARD Master Boot Record disk (the file ci.dll itself is NOT damaged). Found a fix tool

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  It identified the rootkit and removed.
  Seems to be OK now!

  Hope this post could help others.
  Of course, the factory restore does not erase the HDD MBR rootkit...

  Thanks for sharing!

• Servo motor gets stuck in the loop

  My project is to control two motors from the pedals with LabVIEW in combination with UMI-7774 and PCI 7350.

  I use a traditional format of State Machine to simultaneously control two motors according to the absolute position mode.

  In one of the first States, both motors are wound manually by using the speed mode (to make a desired voltage).

  In a later State, the motors are wound to a position specified by the user when you press a foot switch. When you press the other pedal, they are then held in the previous "original" position

  After the first "Tension" indicate when the winding engine and the course due to the pedals is running, the program gets stuck in the State of wind.

  Although drivers are told to go to a specific position, they never move and that's why the program is unable to move to the next State.

  I've attached a screenshot of the winding State where the program is stuck (the engines are not mobile, so when the final position is to compare it with the desired position, the loop continues to go).

  Help, please.

  CAT

  I solved the problem.

  States "Wind engine left" and "Right wind engine" speed has been put back to zero. When the program moves toward States of wind/flow, the speed is always zero (the engines cannot move).

  I simply set the speed value desired in each of the States LBL/RBL (that allowed the engine to get to the position of desire).

  Thanks for all the help,

  Catherine

• Stuck in the loop now accepting the new terms of use on Xbox Live Please HELP!

  I am stuck in a loop of redirection while trying to accept the new terms of use for XBox Live. I have a child account parental consent is required. I KNOW im putting the good info because when I put wrong information, it tells me that the password is incorrect. When I put the correct information and click identify you, let's return to the page where I have to click on I accept. Is this a problem with Xbox.com? Is this a problem with my account? Can someone please answer this question? Ive been very angry, because it has been updated. Please, I just want to play online and talk to my friends. Any help would be highly appreciated. Thank you!

  Try Xbox support:
  http://support.Xbox.com/en-us/

• Where can I get a job for the audio adapter HDA device driver in my Dell Optiplex 745.

  I had a virus and had to reinstall my Windows XP system. I installed all the security and updates customized to the last SP3 level, but I still can't get sound to work on my Dell Optiplex 745 computer. I downloaded the Windows Fix - It program and identified a problem with the audio device, it can't fix it. I need to know where I can get a working device driver for the HDA audio card in my system.

  You go to Dells site and download the correct audio drivers. Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.

• How do I change the prolific com port device driver 4 to the com port 1

  original title: prolific device driver

  When I installed Prolific he assigns the device on com port 4.  I need to assign to com port 1.  If I change my computer 4 to port 1 of the model by using the Device Manager does not recognize the software that I use.  The software must have port 1 affected first comp.

  Hi domjoseph,

  1 do you have. what prolific device installed?

  2. What is the model number?

  3. have you installed the driver for the device?

  If it helps, try the step below and check out them.

  (a) open Device Manager.

  (b) right-click on the prolific device and click Properties.

  (c) click the "Port Settings" tab, click on the button "Advanced".

  (d) pull down the scroll down bar on the left side and select COM 1 (NOTE: choose one that does not say 'in service' next to him). Click on 'OK '.

  (e) click "OK" again Note that the device will be displayed as being on the same COM port as it was before but will be displayed on the new port, if you close Device Manager, and then open again.

  (f) close the Device Manager. You may need to run the software that came with your device to do rescan the COM ports.

  For further assistance, contact the vendor of the device for more information.

  http://www.prolific.com.tw/Eng/support.asp

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Out of the box Alpha stuck in the loop of repair

  Just got my new Alienware Alpha, plugged into the TV (Panasonic TC-P42ST60), and set up as usual, but after turning on it starts up to the Alienware logo then restarts, after reboot it gets captured it repair your PC loop, finally giving me the blue screen of troubleshooting.

  I tried to use system restore to factory Dell but it is always the case. When I try to start in safe mode, that it says windows need to finish to install everything first and then restarts.

  I am stuck in a loop.

  I managed to pinpoint the problem.

  I plugged the Alpha on an Asus computer screen, then he worked as usual, it seems that Alpha can't handle the EDID HDMI to Panasonic TV. I noticed at the start that he said 1080p@50Hz instead of 60 Hz and this was to launch Windows.

  I'm going to continue with the installation via screen Asus and I hope that force 60 Hz in display settings, so it does not work with the TV.

• Stuck in the loop of the license of this software - Adobe has no idea CC2014

  For weeks now, I was stuck in a loop of having to "license this software" or "Starting the trial", when you try to start any Application of CC. I started, because I downloaded CC2014 and also occurs when you try to start my old apps CC.

  Have been on mail and phone with Support Adobe several times and for hours. Support has been very helpful, but after remotely, they tried to do almost everything with my Mac and installing CC, it is clear that Adobe have no idea what is causing the problem.

  The forums are full of solutions to that of other users with the same issue, but none of this helps. I have and support have tried everything.

  I'm a little more luck than others, since I can run my Adobe applications in trial mode but with left (?) 00 days. Others may even open their applications.

  I am posting this in hopes to gather all experiences I and other users have this troubleshooting with Adobe. I have case No.: 0185617726 that has now taken the magnitude for the third time.

  Flemming

  Just completed another session of 2 hours on the phone with support and they finally found the question :-)

  For some reason, there was a time offset in the log files (~/Library/Logs/amt3log) opened in the Console and the current OS time/clock set automatically by my time zone.

  Supporters managed to align the time while he was good in the BONES and newspapers (don't know how but terminal performer of some commands etc.)

  If everything seems to work now, and I'm a happy user of Adobe still :-)

• Install patch audition 3.01 stuck in the loop

  Hello

  I had to rebuild my Windows 7 disc and reinstall all applications.  All adobe products updated and running, except the hearing.  When executing 'Audition 3.0.1 Patch Setup.exe' TI gfets stuck in a loop and will not be complete.  Any suggestions?

  (1) application of language - English

  (2) Welcome to... Next >

  (3) license agreement - accept

  (4) Welcome to... Next >

  (5) license agreement...

  A few loops around these steps and is not complete.

  Thanks for any help!

  Peace

  PS: Windows 7 64-bit, SP1 build 7601 - all of the windows updated to February 16, 2014, Lenovo y550p, 8 G of Ram

  I appreciate your response and tried the link you gave. I get the same loop of install.

  There must be something on my system - although I just reinstall the OS from scratch, all the windows updates, etc... everything is freshly installed with a missing component.

  I was hoping that maybe a personal Adobe could be LURKING on the forum and have a preview, if there is no peer solutions.

  Thanks again.

• Thunderbird is stuck in the loop. Can not stop in the Task Manager.

  links will not open in thunderbird. I followed the instructions in this link: http://www.ghacks.net/2013/01/20/fix-for-thunderbird-not-opening-links/.
  After you set the 3 True values, I left and restarted thunderbird.
  I then clicked on a link in an e-mail message and the LAUNCH APPLICATION box appeared.
  I accidentally entered "thunderbird" instead of "firefox".
  When I clicked on the link in the e-mail, it goes into a loop where the hourglass icon will flash constantly.
  I couldn't go back to the LAUNCH APPLICATION window to change.
  Then, I deleted the Thunderbird folder in program files and reinstalled thunderbird OK.
  Everything works fine until I click on a link in a message. He then goes into the loop, and I have to restart.
  Is there something in the registry that I can change to fix this?
  Thanks for any help you can offer.
  Kind regards
  Geoff Wight

  Go to the menu Tools (alt + T) > options > attachments and delete any reference to Thunderbird.

  Change the preferences to their default values. by https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working#w_check-for-an-incorrect-preference then you can read any article that the incorrect pref is usually only a question after using the Thunderbrowse add-on.

• Windows Vista is stuck in the loop of update, install update 3 of 3, 0% complete.

  I don't have a Vista CD and I can not function in safe mode because it continues to bring back me to the loop. Please notify.

  Hello

  1. you made any hardware or software changes to the computer?

  2. which update is installed?

  3. have you started the installation of updates?

  You can try the troubleshooting provided in the link steps to solve the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: If the steps above do not work, you will need to contact your hardware manufacturer.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.