stuck in the windows will update loop 7 update to solve this problem?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- Programs that you have problems with windows vista
- Configuration error messages 3 3 0% complete updates
- Recent changes made to your computer no
- What you have already tried to fix the free dick of mirosoft problem did not
Hello
Well, Windows 7 has also sometimes the same question.
You can use the solutions in this KB - 3 methods and I listed a little help for them below.
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature
How to do a startup repair in Vista and Windows 7
http://www.Vistax64.com/tutorials/91467-startup-repair.html
You can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.
This tells you how to access the system - Vista Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
This tells you how to access the system - Windows 7 Recovery Options
http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions
Try recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html
Method 2: Start the system in safe mode and then use the system restore feature
How to do a system restore in Vista and Windows 7
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
You can also do a restore of the system of starting with a disk of Vista or Windows 7.
Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
x 64 64-bit.
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
The title says it all. I can't even use run to open programs.
Hello
This should help you.
'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"
http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/
"When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.
Run the Mr.Fixit here or you can use the manual method it y to correct yourself
http://support.Microsoft.com/kb/950505/en-us
And also, read information please.
'Change the programs that Windows uses by default'
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
See you soon.
-
I can't sign into windows live messenger, I get the message that windows live messnger is unavailable currently try again later and also I get the error code 80048820, can someone help me solve this problem.
Hello jabeena, welcome.
This section would apply in fact to the Windows Live programs, but we'll see what we can do to help out you.
I recommend to try this first:
1. disable any antivirus software or security, you have running on your computer. Looking for software to disable that contains a firewall.
2. click on START
3. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
4 type the following and press enterRegsvr32 softpub.dll wintrust.dll initpki.dll
netsh winsock reset
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
my freezer scandisk to 0% at the start of the computer. someone please tell me how to solve this problem, and for this reason, I can't use my computer for other things as well. It is now very slow and do not file load. as adobe flashplayer doesn't load on google crome more please help me with this. I have windows xp sp2
Yes, install xp3, the patch is only for hp AND amd pc, install from the link and then navigate to the microsoft updates and a priority scan, install, then do a custom scan and install rootkit updates, it will be a long process that you are behind in security updates , \\
clean the pc then do the following:
Shenan Stanley tips: will probably want to clean this machine...
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
-
The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem. I guess a child (best case scenario) or my husband (worst case) have been involved in this. But it drives me crazy. Any ideas on how to get that back in action?
Hello
What is the brand and model of the computer?
Were there recent changes made on the computer before the show?
This issue could be due to corrupted graphics cards drivers. I suggest you to update the latest version of the drivers of graphics from the manufacturer's Web site and check if it helps.
http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor
Thank you.
-
Original title: Pny flash drive problems
I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?
Hello
Do you see these error codes in Device Manager?
Plug the flash drive and run the Fixit of the article below and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/See also the section below, which might be useful in solving the problems of USB devices.
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575 -
When I start my computer, I get a message saying c:windows\system32\ambrune.dell how can I solve this problem?
Original title: ken asked
-
Hello United team, I installed recently the 'command and conquer zero hour', but when I open it this error pops up "you have experienced a serious error, serious errors can be caused by many things including the virus..." "How can I solve this problem
"You met [a] serious error...". "It would be interesting to know what software gave this message. The game? Windows? Unlikely, I've ever seen a strange warning like this. Is it followed by a Board, what to do next? -I'm asking this because many "rogue AV" programs use similar messages to push users to install their "security solutions" = malware that contains and spreads viruses, he warns against.
-
Spam emails are sent to all my contacts from scratch as if the email was from me. How to solve this problem?
original title: Spam e-mailsWhat do you mean by "archived" contacts? If they are not contacts that are currently available to you, then there is no way that your PC could be sending mail to them.
It's the easiest thing to send an email from any address you like in the world. This is not an indication that your e-mail account has been compromsed. He could have, but changing your mail server access password can prevent this. The usual cause of people receiving messages that look as if they're from your is because your address was used as the address of sending junk e-mail. It is very common and does not mean that your PC or any PC, you never hit sends the mail. It is something that you can only order if your mailbox has been compromised.
-
my hp 530notebook, shows the market password? Is it far from solving this problem?
My computer hp laptop 530, shows the market password? Is it far from solving this problem?
Hello
It seems to be a BIOS password problem you are having with your CV.
I'm sorry, but Microsoft forbids any help given in these Forums for lost or forgotten passwords; which is what your question is.
Microsoft tips for BIOS password problems are to contact the manufacturer; in this case HP:
http://WWW8.HP.com/us/en/contact-HP/contact.html
Or ask in the Forums of HP Support:
See you soon.
-
Hi, I m looking for a decoding of the 0x6101be5 fault code. Any idea to solve this problem?
Type of the printer is Photosmart D5460
Thanks a lot for hel
steviedanielle
It could be a work around. each time u replace each cartridge. Turn on the printer and check if that make all the difference... Although the chances of losing these cartridges are more unless your next printer uses the same cartridge
-
When I open my digital books in Adobe Digital Editions is always the message: E_ACT_NOT_READY, what should I do to solve this problem on my computer?
You open forum duplicate questions: when I open my digital books in Adobe Digital Editions is always the message: E_ACT_NOT_READY, what should I do to solve this problem on my computer?
-
I use iphone videos and still images in a project of first Pro CC. When I drag the videos in the timeline, they work fine, but when I drag still images, I have only a small part of the original photo. No idea how to solve this problem?
Right click on the photo in sequence and "ladder to the chassis '. Can also be set in the preferences and affect imports after the change
Thank you
Jeff
-
I have can´t install creative cloud. I received the message: "you need a creative Cl to solve this problem, but it is absent or is injured. Please download and install a new one. But this doesn´t works.
Uninstall anything cc which can be installed.
run the cleaner, the use of the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
then reinstall apps download Adobe Creative Cloud | CC free trial Adobe
-
My creative cloud application shows a spinning wheel that never stops. It won't appear that I download the trial of photoshop. How can I solve this problem?
Also try the following link for the resolution.
Maybe you are looking for
-
small crack of unknown origin.
I was just wondering Sony take responsibility for any cracked screen? As my phone vibrates down in a small area less then 15 centimeters. I can't imagine such a high quality phone like the z3 would have such poor build quality, certainly, this must b
-
HP LaserJet 1102w paper tray error message
Recently my LaserJet 1102w ceased to duplex print. Instead, after printing the first side, it gives an error message: feeder must be filled. The bin is full, but I can't continue to print on the other side, no matter what. It has become a huge probl
-
webView: load a URL from an ActionItem
Hello. trying to do a simple display web app for a forum site and I want to put a "View Active Topics" button in the action menu and on triggered it must load the active topics page. im a beginner... has got everything in place, but when to trigger t
-
My dissatisfaction with Adobe Brazil
I know that the forum is not a way of official service, but I'm not an alternative.A few weeks before my signature being given the problem.I had no balance on the card, two days after realizing this problem, I tried to contact Adobe to solve my probl
-
HELLO DREAMWEAVER GENIUS!I'm developing a dreamweaver login page where a user can be connect on my Member restricted using his username and password page.The problem now is that I want to count the number of each user login in my database. I have alr