HP LaserJet 1102w paper tray error message

Recently my LaserJet 1102w ceased to duplex print. Instead, after printing the first side, it gives an error message: feeder must be filled.

The bin is full, but I can't continue to print on the other side, no matter what.  It has become a huge problem, even when printing jobs front.

Any ideas?

Hello

Once you replace the pages in the feeder, try to opening and closing the door of access to the cartridge page Word the print job and check whether that prints on the other side.

Hope that helps,

Shlomi

Tags: HP Printers

Similar Questions

  • hp7500a paper mismatch error message when you use eprint

    I have a printer large format of HP7500A

    When I send pictures from my phone to the printer via x, I get a printer "Paper Mismatch" error message.

    Paper size or type.

    Yet when I check the settings it is on A4, which is the book that I use.

    Could someone tell me what I need to do to fix this problem?

    Hello Nashy58,

    The question is in works for printing with the PhotoSmart printer line.  When you send a photo printing via ePrint, ePrint will automatically print to the photo tray.  At the moment there is no way to change this.  To print a photo to paper ordinary via ePrint, you put the paper in the photo tray, I would not recommend it because it was not designed to handle this type of paper.

  • The J6480 paper jam error message will not reset

    I have a sinus J6480 2009 and it's been great!  -After printing 1 doc a transport jam has occurred.  After clearing the jam in the printer cartridge holder, I turned everything back on and a paper jam error message appeared.  I did everything - check all patterns, clean the rollers, unplugged and checked the duplexer - always error message.  Is there a way to reset this?

    Can someone help me please!

    Thank you!

    Brian DB

    Hello

    Maybe a few pieces of paper is still stuck inside. Try the following two and check if any stage of work:

    http://support.HP.com/us-en/document/c01314068

    http://support.HP.com/us-en/document/c01312792

  • Paper mismatch error message

    When you attempt to print a photo, I get a paper mismatch error.  Uses a macbook pro 10.6.  This is a new printer Photosmart C309.  Loading paper photo 4 x 6 supplied with the printer... right side up... pushed forward and plastic cursor rolls over to the right... I try to print from iPhoto... selected photo... Press on print and selected photo 4 x 6-10 x 15... When I hit the "print"... key photo paper is slipped into the printer and then a few seconds later, I get paper mismatch error. Have printed docs full-size without problem.  Any help to be more appreciated... I did go to the HP website and download the latest drivers for this printer and osx 10.6.  Have checked all the settings in the system prefs under print and scan and see nothing wrong

    Interesting... I was not choosing photo but that did not work... I selected auto and press on print and a message came up on the viewer of the printer that says something to the service that the automatic detection of paper was selected and went ahead and printed the photo... I tried to get the message coming up again in order to be correct in what he says, but it won't come back again.  Thank you very much for your help... printed 4 photos and they are all 'professional' looking... I'll take advantage of this printer.  Once again, thank you!

  • HP Laserjet Pro print FAX error messages M127fw

    My M127fw Pro Laserjet prints an error report anytime that the incoming telephone line becomes active.  It's a line for FAX use only, and there is never intend to use this to talk.  Given that any appeal could only be a robo call or a solicitation, a "No. FAX detected" printed report is UNnnecessary.  I would like to stop the printing of this error message.

    Hi @furstm ,

    I see that you have problems during the installation of the printer on a dedicated line and the printer will print a 'no. FAX detected' printed report when eventually comes a robo call or a solicitation. I would like to help you today.

    Select never to print Fax error report.

    Select the Menu icon on the screen of the printer, Fax.
    Select Fax reports.
    Select the Fax error report.
    Select never.

    This should solve the problem.

    Have a great day!
    Thank you.

  • Paper size error message

    I have an OfficeJet 6500 has more. In the last two days, I get an error message on the paper size not being is not right when I try to print, even if that paper size is correct. I restarted the computer or power off the printer, reset all settings paper and page again once and even tried to re - charge the driver software from the HP Web site. Nothing did. Cannot print. Very frustrated.

    I just got two great suggestions at the same time. I just tried to print a photo, and it worked. Then I tried to print a message on the web and it is printed. then, it seems that the problem of Microsoft Word, communicate with the printer. I guess I'll then try the fix for the firmware and see if that does it.

  • Color laserjet mfp 277dw pro: error message when installing

    I tried several times to install the printer, but once get 80% comes a message "error a problem occurred when preparing to install the software in your system." Restart your computer...

    Please help me

    Hey @valero1313,

    Welcome to the Forums of HP Support!

    I see that you have a problem with the installation of the software for your MFP Color Laserjet Pro m277dw on your Windows 7 PC. I can help you with that.

    Here are some things that should help you with the installation.

    1. If the USB cable is connected to your PC, delete.
    2. Click Start.
    3. In the search bar type "cmd" (without the quotes) and press ENTER.
    4. In this window type "msiexec /Unregister" (without the quotes) and press ENTER.
    5. Type "msiexec/regserver" (without the quotes).
    6. Click Start.
    7. In the search bar type "msconfig" (without the quotes) and press ENTER.
    8. Click the Services tab.
    9. Click Hide all by Microsoft.
    10. Click Disable all.
    11. Click the Startup tab.
    12. Click Disable all.
    13. Click OK and reboot your PC.

    Please let me know what happens after you run the Setup program after you follow these instructions. If this allows you to install, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

     
  • LaserJet M452dw: Laserjet M452dw paper tray will not close

    Removed the tray paper to add paper and now the tray was arrested along with about 3 inches to go and will not close.  I also noticed that the drop-down menu that is located above the status bar was low so I pushed him to the top in place, but the drawer is still not closed.

    Problem solved, it was the length of tray setting that had to be closed for paper to letter!

  • HP Laserjet 1320 PCL 5: Error Message with my HP Laserjet Printer

    My HP printer keeps showing an error state and I can't print.

    I got the problem fixed.  It was my counter top that was the problem and had to use the feature of sharing with the laptop.  I don't know how it changed to not share, but he did.  Thank you for your help...

  • OfficeJet Pro 8625: States 'Paper jam' error message when there is no

    The ADF has stopped working, because the machine thinks there is a paper jam.  However, there is no paper jam.  I checked all the places that I am able to access to, and everything is clear, making me think that there is something wrong in an indoor area that I can't access.

    Thank you for your answer, I'll try that.

  • Error 'Open paper tray' HP 6835

    To install on a new Officejet Pro, I bought at Costco.  Installation went well except that I constantly get a message error on the printer screen that says "paper tray is open.  Close the drawer to continue. »

    The first time I had this error I was able to open and close the tray and the error disappeared.  Now it stays on all the time and the printer does not print.

    This is a new printer.    It was purchased at Costco in the rule last month.  Please notify.

    Hi @RamblinReck and welcome to the Forums of HP!

    I hope you had a good holiday!

    I see that you are having paper tray errors. I would like to help with that!

    I recommend to remove the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    I suggest also download and run the HP print and Scan Doctor.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • OfficeJet Pro 6230: Officejet Pro 6230 continous (not of paper) paper jam error

    As soon as the printer powers on it the ink carrier Wizz backward real quick (as he struggles to move) and then gives me a paper jam error (the resume light flashes and error appears on my screen). He did the same thing when I try to print anything (including the status report page).

    When I up the access panel upward (power on), the carrier of ink isn't even move to ink cartridges which can be changed. I try to move with force, but it does not move (if I use more strength, somethings will break). Ink is a bit new, so I don't know it still has ink in there.

    The steps I've tried:

    plugged the power supply into the wall outlet

    roller cleaning

    THERE IS NO PAPER or PAPER PIECES BETWEEN ROLLERS (I checked like 20 times)

    reset the printer

    There is a large black gear coupled to a white average speed on the left side near the bottom of the printer. I manually drove the speed by pressing (rotation) of North (or forward or to the rear of the printer) for a few seconds and once I did that. the ink carrier was able to move as it's supposed to, and I could see the ink. but once the power is back on, the carrier of ink was in the locked position and fights again and gives me the paper jam error.

    I don't have really any troubleshooting documents on the CV online on how to fix a jammed media of ink and clearing paper jams, so I'm out of options.

    It is plugged into USB

    The main problem is the paper jam error.

    I don't know if the stuck carrier of ink is the cause.

    Hi @Comp-Tech.

    Thank you for joining the HP Forums!

    I noticed your post that your printer HP Officejet pro 6230 receives a constant paper jam error. I'm happy to help you!

    Since you did all the steps already to troubleshooting in this guide, A 'transport Jam' Error Messageand this guide, "Problem of tray or paper jam" Error Message appears, as well as the reset of the printer. The next step is to fix the printer / or replaced.

    Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    Best regards!

  • HP officejet 8500: jam on fax error message

    My printer gives me a paper jam error message everytime I try to fax on the set of the car. But he fine Fax out of the glass. Also, it prints multiple copies of auto tray.   Amy ssuggestions before buying a new machine.  It is 5 years old.

    Hi @Horseshoer,

    Welcome to the Forums of HP Support!

    I see that you are not able to communicate by fax using the ADF on your HP Officejet 8500 printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand that you are able to fax using the scanner, which is nice to hear. I also see that you mentioned that you are able to copy of the set 'auto '. Are you referring to the ADF (automatic document feeder) or the feeder?

    If you are able to copy multiple pages using the ADF, fax should also work. The printer may have a little problem, that can solve a reset.

    I would like to do a hard reset to see if that will solve the problem.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    If you have a computer that is running Windows 7 or an earlier version, I would update to the firmware of the printer. Clickherefor the download page.

    If you are unable to update the firmware of the printer, I suggest to try partial reset or Semi - full Reset. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • HP Envy 7645: 3 error message 5 x

    I was able to print my cards clubs 3 x 5 on my HP Envy 7645 in July and in August.

    It's something I do every month and must be able to do it on my computer.

    I just went to do new members and I get this error message-

    "Short paper. the printer cannot print on paper shorter than 4.9"/12.5cm,... »

    Do not know what is happening, I was printed this card on this printer for the last two months.

    I see no more an option for the 3 x 5 card.  I tried to put the cards into the long way, but the part not tighten up to the cards and they begin to slip.

    What I can do, I have to be able to print these cards of 3 x 5 on my printer?

    Hello @2rubes,.

    Welcome to the Forums of HP Support! I see that you get an error message when you print on 3 x 5 cards to your HP Envy 7645. The error message is "too short paper. the printer cannot print on paper shorter than 4.9"/12.5cm'. You were able to print on this size and now you get the error.

    I believe that the following document can be useful to the 4 x 6 print troubleshooting; 'Paper mismatch', or 'Difference of paper size' Error Message When printing.

    If the problem persists, it may be better to call us. A professional phone can access remotely your computer, with your permission, of course and perhaps see something that needs to be adjusted to solve the problem. Please contact our technical support at www.hp.com/contacthp/. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Thank you

  • Paper jam error wrong Officejety of HP Pro 8500 has

    I canceled a print on my printer today and its giving me a paper jam that I can't get rid of feed! Ive checked all the forums without success? Please pelase y at - there some brilliant genius out there who can tell me how to solve this problem?   Thanks in advance for all irritable brilliance, you can offer!

    If you experience a paper jam error message it could be caused by a number of things such as dirty or damaged rollers.  I've included a helpful link to a document that could help you.

    Let me know if it helps.

Maybe you are looking for

  • Skyping

    OK I Skype someone we only cat but the video is not working I can not answer my calls or dial a number

  • HP Elitebook 8460p: HP Elitebook 8460p reinstall drivers and OS

    I just bought on the auction site a HP Elitebook 8460p for personal use, that told me that the OS has been cleaned so I tried to reinstall.  I couldn't if initialize yet because I'm waiting on an adapter so I thought the waiting period, I want to dow

  • Can you fix oblique or perspective with Photos?

    In the photo I crop and at the same time correct tilt or irregular horizon line. I am also looking to fix what is variously called inclination, perspective or a key effect when shooting subjects 2 dimensions with an iphone - in my case, the ongoing w

  • No material listed in Labview 2010 Linux DAQ

    Hello I have a problem with DAQmx Base 3.4.0 under Linux: mxbaseconfig shows my NOR-6009 device to the USB port. I can also create tasks corresponding to the nor-6009 in there. When I try to create a task in Labview 2010, one of the constant I/O are

  • Graph of the complex number in plan of Argan

    I need help to make a graph with Phasers current in three-phase network voltage and... I have a graph of the complex numbers, but I want an arrow in the end, to represent a vector.   rsduarte