Stuck on colours - Windows 7 Pro Office

Similar Questions

• Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

  Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

  I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

  I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

  Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

  1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

  2. Please look in Applications-> utilities-> Console logs for error messages.

• SimplePass 2012 stuck during installation after the upgrade to windows 8 pro

  Hello!

  I just upgraded my Pavilion dv6-6145dx to windows 8 pro and new installation preforming. I downloaded all the drivers and software from the hp support center, but when I tried to install SimplePass

  2012 stuck it in the middle of the progress of the installation for about 4 hours as shown below:

  

  Will I keep waiting? Or there is a solution knowing that I found its icon in the start menu?

  Thank you!

  Samuel Farid

  I installed the windows 7 one instead of. In any case, I fixed that by closing the Task Manager installation program, that the I started the software in the start menu, and believe it or not, it worked great. There is another way to solve this problem of Morphix, site Web AuthenTec software, it is much more updated and working great.

• Never had the CD for my laptop Window XP Pro OS or Pro Office, Visio, project and PP but now I need to reinstall.

  I need to change my phone to a double partioned Window NT (drive C) and Window XP Pro (drive E to a single disk with XP but I have not never have the CD of the operating system XP or Pro Office, Visio, PP and the project.)  I understand I have to format the drive unique and which will be wip on everything, including the data of the user.  How can I get the OS and the App CD "s to proceed?

  See: How to replace Microsoft software

• I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  If I search on possible improvements, he says it should work?

  Try the chat support:

  Activate your Windows 10 license with Microsoft Chat support

• Windows 7 Pro, download "Microsoft Office for the user final license agreement." in office 2003 programs.

  I bought a new HP with Windows 7 Pro computer, then loaded all of the software I used on my old XP system. Whenever I have start any Office 2003 application, I get a dialog box titled "Microsoft Office end-user license agreement. I have to click "I agree" before you continue. I use an old Vista solution of "as admin" and now I get a box asking if it is to change this program (register I think).  How can I stop this box to appear? Thank you.

  Hello sys169,

  Thanks for posting on the Microsoft answers Forum.

  As you encounter a problem with an office related question, it would be better to post in the forum Office.
  Please click here to post in the Forum Office of the community.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

  Key ESC Office keyboard does not work on desktop running Windows 7 Pro 64 x

  Now, it's a boring, which several other users have reported under different threads. Because I couldn't find a post with quite similar symptoms, I made my own topic.

  I am running Windows 7 Professional 64 x on an old one (Intel Quad-Core, 4 GB RAM, 524 GB HDD - in case, for reasons unknown to me, someone needs to know it...) , DellXPS system. Not more than a few weeks ago my home button keyboard unresponsive on this system.

  I did a lot of troubleshooting, but these measures have been carried out:
  * Tested keyboard on the other system, touch ESC WORKS on the other system
  * Reinstalled keyboard and USB drivers on the XPS system, ESC key does NOT WORK on the XPS system
  * Connected to a never-before-used USB keyboard, ESC key does NOT WORK on the XPS system
  * Opened and cleaned the keyboard, tested, Escape key WORKS, Don't DO NOT WORK on the XPS system
  * Tested in various applications: Desktop (Esc will close the start menu), Photoshop, Vegas, Notepad, games full screen OpenGL,Escape key does NOT WORK on the XPS system
  * Google for possible solutions, none found...

  Note: Highlights show where the ESC key does not work. I am troubled by the XPS system.

  In case you missed it my list of troubleshooting steps, the ESC key works on another computer of Windows 7 system.

  I have to still garble my self through the registry in the hope that someone might have an idea of the steps to follow before I lose a day to see the things that I honestly know squat. Please help if you can; What could be the issue/common application that separates this key in the Windows world and how could I solve this problem?

  Thank you in advance!

  For reference,.
  No major changes have been made since the keyboard unresponsive with the exception of:
  Updates to FireFox (including modules Ad-Block Plus, NoScript, which have also been updated).
  Windows Update
  A 10.x MB World of Warcraft patch/update on a keyboard AFTER week unresponsive

  Already installed the patches StarCraft II and World of Warcraft, which none touched my keyboard to my knowledge. I finished almost all of StarCraft II and had no problems...

  I know it's a bit old, but I was living the question myself.  Thought I had found the problem and it was fixed but then it happened again.  Came to find out (by closing a program and test the ESC key) it's because Photoshop.

  With the help of Photoshop, which could match the case you mention.  Not only that but I did a search ('ESC' does not not Photoshop) and stumbled on some answers/solutions workaround for it.  One is to use SHIFT + ESC ESC does not work.

  Hope this helps someone.  I fell it using my original research ("Windows 7" BSE "ESC" keyboard does not) and know that others are likely to see.  If you have not already learn the cause, in the year + since your original message, then voila.

• Is Windows 8 Pro and Microsoft Office 2010 license Transferrable to new PC (during the withdrawal of the old PC)

  Hello

  I had bought Windows 8 Pro as part of the upgrade offer in 2012.

  My current desktop PC gives signs of imminent failure. So I intend to mount my own PC and all ignoring the old one.

  My question is if I can transfer the current licence to the new office.

  What is the procedure for the transfer of the Windows 8 Pro and Microsoft Office license to new PC?

  Thank you and best regards,

  UNNI

  Yes, you can transfer the two as long as they are copies of the retail sale and do not come pre-installed on the machine.

  To waive the license of the machine, you can just format the machine or uninstall the license of Windows 8.

  To proceed to reinstall Windows 8 on the new computer and restart phone.

  Please note:

  To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

  You can reinstall of Office 2010 and also reactivate by phone:

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

• Acrobat Pro 7, Windows 7 and Office 2010. C: blocked by GPO. Designer application cannot save. Ther

  Hello

  Please I need help if possible. Recently, I upgraded a user of Windows 7 with Office 2010 and reinstalled its Acrobat 7. We locked c: via GPO, and it seems that a problem when using the designer. It and click on save or save as whatever she wants but nothing happens. If I log in as admin (I see that c :) everything works fine, if possible could someone lead me to the solution.) We can not open c: for it, if there is a registry edit where I can change the default location for this would be great. Thanks in advance.

  Paul

  If the Win7 is a 64 bit system, you will need to upgrade Acrobat on XI. AA 7 will work with Win7, 32-bit, after some game, but will not auto. I am thinking especially of printing to the Adobe PDF printer. PDF Maker certainly doesn't work with OFFICE 2010 necessitating AA X with updates to a minimum.

  For AA7, AcroTray function will probably fail (it did for me on a 64-bit system). In fact, you won't probably even get a printer. I was able to install a HP PS printer (color should probably be selected) and change the name of the Adobe PDF printer. Then change the port in the file. When you print to the printer, it will create a PS file (actually ranked PRN) which can then be opened in distilling to complete the process of creation of PDF. For most users, this isn't an obvious solution - I even made with AA5 on a Win7 32 bit. Due to problems, it is strongly recommended to go (at this point, this is a new purchase AA9 is necessary for the upgrade at present) to AA XI. Sorry for the bad news but AA7 is 8 years old and is ancient in terms of software (OK, I always on some XP machines).

• Palm TX 32 bit Windows 7 Pro of XP Update: use XP mode? Or Win 7?

  I'm really good at making fatal mistakes with technology and my Palm is too critical to risk, so I bought a portable 32-bit, Windows 7 pro and XP mode installed.

  I've scoured the forums, but all I can find are problems/solutions with 64 bit (which is what scares me in the first place, of course).

  First of all, I should install in XP mode?  Or install Win 7 on a 32-bit computer will go smoothly?

  Secondly, can I use my original disc with the 4.2 version of Palm Desktop?

  Finally, for my peace of mind, you kindly check my checklist of errors, omissions or dangerous areas.

  (1) synch the device from Palm desktop

  (2) backup on my SDCard with NVBackup

  (3) open the XP mode - or do not open XP mode as you recommend

  (4) install Palm desktop (disc or download that recommend)

  (5) enter the same username as on the device / xp computers

  (6) change in Organizer substitute Office

  (7) with the sync cable. Make tea. Be calm.

  (8) check data on handheld and the desktop to find errors.

  (9) when somewhat confident everything goes well, return led to synchronize except for stays of backup as handheld overrides desktop. (not sure why, but it's the default I guess.)

  Thank you

  Off the hook

  SUCCESS!

  Thank you all very much. I danced around the kitchen.

  I had a few problems, and that means a question.

  After installation I plugged the cable in and upward jumped a box "Installing the driver software" telling me "software device driver was not installed successfully. I thought it was over, and that's my question. What does that mean? Because the next thing that happened, thought I had nothing to lose but hope, I tried a synch, and incredibly, it worked. I made a small change in the calendar and it synchronized at the back of the unit.

  He also tells me there is a problem with the quick installation then took me to do nothing.

  In addition, in case it might help someone, disable UAC in Win7 is slightly different from that of Vista. Go to "edit your user account settings" and set the cursor to "Don't warn.  At this time, I went on the internet for security. And it's a little annoying, because after that you have to restart the computer. And when HotSync is done, you go back to the control panel and restart and then restart.

  WyreNut, I smiled when I saw your post.  I always assumes that the volunteers on the technology forums (which, in a just world, would be paid buckets of moolah for their help) are early and that you would be all Win8 (and the curse, I suppose). But I guess that help you here because if something works (such as Palm) why spend.

  I kudo has you all and would buy you champagne if I could.

  Confused, but less.

• How to rearrange windows within an office space?

  I use a MacBook Pro with two additional screens (one is one Mac Thunderbolt, the other a Dell). I spread my apps on three screens, each indicating your desktop with different applications. It's all great.

  I have an exclusive piece of the software running that opens multiple windows. I can move them on different screens and this isn't a problem, although I prefer to keep them all together on a screen.

  When I use one of the menus, there is a pop window... There is a backup of the menu item, so the pop up to ask me the name of the item that I am saving. The problem is that I can't see the window pop up. I know it's there, because the main Windows applications / other hang, waiting for the response of the dialogue. When I go into Mission Control, it shows me the pop window. But I can't get there. It seems that the pop-up is positioned off the coast of the current screen. Mission control displays a thumbnail of the window of the office, so I can see him there, but when I'm out of Mission control, are full of things normal size and you can not see.

  

  This looks like a bug in the application itself, who does not understand how to organize across multiple desktops.

  There may be a work around the use of the preferences system-> display-> Windows meet, but eventually the fix must come from the software developer. You reported the problem to them?

• Pavilion p6-2133w: upgrade Windows 10 Pro activation after replacing the processor and motherboard

  I upgraded a Pavilion P6 W10 Pro in September. Everything was going well until the motherboard and processor failed. When I replaced the hardware I am prompted to activate Windows - I have the product key for Windows 7 Home Prem OA office machine that does not work for W10 Pro. I don't know how W10 Pro ran six months and support MS insists I do decline to W10. Two questions.

  1 how W10 differ from the W10 Pro?
  2. How is this W10 Pro could have been improved in Windows 7 Home Prem OA? Looks like a decoy on the BONE.

  Greetings,

  The replacement of the mother/CPU card can be extra monkey wrench in this situation.

  You cannot use a key of Win 7 Home on Win 10 Pro.

  You will need to install Win 10 and then move on to Win 10 Pro. Win 10 going to Win 10 percent if you had an activated copy of win 10 Pro.

  1. other features such as BitLocker and domain join.

  2. I have no idea how you've gone from Win 7 Home win 10 Pro. Were you a BETA-Tester (Windows Insider program)? I upgraded from Win 7 to win 10 Pro, because I was a BETA-Tester,

  I just did a clean install of Windows 10 Pro but ignored the input of the product key. Windows activated, but not right away.

  The Beatles: "everyone has something to hide except me and my monkey"

  See you soon

• HP support assistant - will launch or uninstall properly - Windows 7 Pro SP1

  RE: Cannot run, HP Support Assistant can not even uninstall properly.

  Have my office since 2010.  HP Support Assistant has still works perfectly.  Now when I try to run HP Support Assistant, it does not start, returning the message "an unhandled exception ('System.TypeInitializationException') occurred in HPSF.exe [6264].»

  In response, I downloaded the latest version of HP Support Assistant HP website and tried to install it.  There was a problem and he asked me if I wanted to try an install using recommended settings.  I said yes, but no completion message was never presented.

  Thus, by the HP troubleshooting suggestions I tried to uninstall HP Support Assistant using the dialog box uninstall Windows standard.  But, also, the operation failed with the message "Error 1316 network error occurred trying to read from C:\Windows\Installer\HP support Assistant.msi".

  I tried again to install the latest version of HP Support Assistant, but once the installation wizard has started the only message he introduced the question of if I wanted to replace the existing files.  I said yes, the wizard appeared to move forward, but no completion message was never presented.

  Another attempt with the dialog box uninstall Windows failed once again with the same error 1316 as before.

  So I'm puzzled.  Suggestions?

  My PC: Desktop, model HP Pavilion HPE-170 t

  OS: Windows 7 Pro, SP 1, 64 - bit

  The HP Web "Boot errors resolve the MSI" page (http://support.hp.com/us-en/document/c00811375 ), I found a link to a Microsoft Web page: "The problems that the programs cannot be installed or uninstalled" (http://support.microsoft.com/mats/Program_Install_and_Uninstall?).  This Web page has a "Program install and Uninstall Troubleshooting" utility which worked like a champ to effectively solve the problems with the existing, corrupted application and uninstall it.

  I am out of the Woods and happy now.

• Was Windows 2000 Pro?

  Hey. I heard people talking about Windows 2000 Pro with respect.

  "This is a fantastic product!

  Well. is this true?

  Hello

  Windows 2000 is a line of operating systems produced by Microsoft for use on personal, desktop computers business, laptops, and servers.

  Published on February 17, 2000, it is the successor to Windows NT 4.0 and is the final release of Microsoft Windows to display the "Windows NT" designation.

  He was replaced by Windows XP for systems of office in October 2001 and Windows Server 2003 for servers in April 2003. Windows Me was released seven months after Windows 2000 and a year before Windows XP, but Windows Me was not intended to be, nor served it as the successor to Windows 2000. Windows Me was designed for domestic use, while Windows 2000 is designed for businesses.

  He had a lot of new features such as the update of Desktop Windows, Internet Explorer 5, (Internet Explorer 6, which entered in 2001 is also available for Windows 2000) Outlook Express, NetMeeting, FAT32 support, Windows Driver Model, connection sharing Internet, Windows Media Player, support for WebDAV etc.

• TS 130 with Windows 8 Pro OEM version

  Intend to buy 130 TS and would like to know if I could use it as an office
  PC with Windows 8 PRO OEM builder version of the product?

  Thank you!

  Hello and welcome back!

  It should work. Windows 8 is compatible / certified on the TS130 platform means that Lenovo provides drivers, firmware, etc. for this OS and is supported.