Stupid people writing software.

Similar Questions

• Good writing software?

  I've been using LibreOffice, but due to accessibility issues, I'm looking for the best writing on the Mac tools. Does anyone know what would work?

  1. I have rsi severe and sensory and coordination issues.

  2. I can not disable the flashing cursors in LibreOffice. Flashing what whatsoever, it is difficult for me to see, can be painful and can be confusing, so it makes it hard to check where I was before. LibreOffice relies on a system setting and OS X uses different settings; I can't disable some flashing cursors in OS X but not LibreOffice flashing cursors.

  3. I have to be able to avoid the animation, use Scroll + and other accessibility and break of planning tools and avoid both hands combinations of keys or keys and clicks.

  4. I need to check my notes, check my sources, create tables and enter data, so concentrated writing the software won't work. I need avoid the automatic formatting, AutoCorrect, etc..

  5. I need to open my .odt files and save in .odt or another format open to no - to the request-for-obscelence. I'd like one that uses open default formats. Ideally also .epub or .html.

  6. I would like to be able to use Dragon for Mac, if and when construction pain subsides.

  Besides only LibreOffice and OpenOffice, I tried Appleworks, Pages, and Textedit, more graphic for the drawing.

  1. I used to use Appleworks, but Apple has continuously supported.

  2. I also used Pages, but Apple stopped supporting that too; the current version cannot open the old files of the original version.

  3. I tried Textedit, but I can't find "save under" so I don't know if I can create a new version or a new document to turn an old, and I get an error message if I try to change a test document.

  For TextEdit, try to hold down the option/Alt for choosing Save as.

  A few suggestions below.

  compatible with mac Os 10.11 processing programs

• Satellite L650 - 1 M 0 - Question about LED control using a writing software? in C++

  Hello

  Is it possible that a console program written in C controls the State of the led on the computer?
  I speak not here the LED keyboard, but the led corresponding to such a State of hard disk, power state.

  It's at all the possibility to 'take control' over these diodes? Or rather, it controls a separate computer system?

  Most of the care on the State of control module LED WiFi adapter. I replaced the network card, but my laptop is not the end of support. Start the computer, but you can't control adapter to function keys. When you disable the card in Device Manager, the light does not turn off.

  If I could create a program that will control the LED, if I could take a supplement (separate second program) for the function keys, which does not support the new card.
  Laptop is a Toshiba Satellite L650 1 M 0.

  I think that computer security is not strong because it is not protected from the BIOS. If it was, wouldn't at all. Only the lack of logic LED WiFi.
  By taking the scientific program caught can control the LED.

  Please be patient with me and write in plain English-the two shows (I'm a novice programmer C++ programming language) and English.
  I don't know English well, so I took the Google Translate. Sorry for my bad language...

  [b] compiler: [/ b] Microsoft Visual C ++ 2010 Express
  [b] software language: [/ b] C++
  [b] type emission: [/ b] console (maybe later I'll try Windows Form...?)
  [b] system: [/ b] Microsoft Windows 7 x 64

  I know that this forum is no longer on the problems associated with technical problems, but none of you can know what is "address" LED WiFi that is already associated with the knowledge of the equipment.

  Hi Krzysiolek

  I guess that no member of the community would be able to help you in this case very particular.
  I guess you should ask for a person with good knowledge of C++ programming.
  Here you can meet people and enthusiasts who talk technology, share their knowledge and trying to solve some common problems of the laptop.

  However, good luck

• Portege R500 - software of WinDVD and DVD writing

  We bought a lot of R500 notebooks and put our brand image on them, but I can't find the software WinDVD or writing software of DVD on the DVD provided with the machines or on the download page. Are they available? We do not want to use the image that comes with the machine, as it has too much pre-installed software.

  Thank you.

  Why ask you the same thing for the second time?

  Please check you first thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31764&TSTART=0

  Good bye

• X 230 software of Windows 8 pen writing tablet

  Hello
  I'm going to the Tablet from Lenovo X 230 and it came with Windows 7 pre-installed and everything worked very well. Then after you have installed Windows 8 Pro on the Tablet, everything works fine except that the pen writing software is gone. I can use the stylus to move without any problem. I can open it, close and do a right-click with a pen, but can't use it to write. I installed the necessary drivers for the pen and installed the ThinkVantage update software on the Lenovo support site and ran the update to get the latest drivers and software but no luck. I can calibrate the pen without problem.
  Any ideas where I can get the handwriting for this software. ?

  Thank you

  Moderator edit: BONES has added to the object.

  Hi, hmandi01

  In Windows 8, transcript of text writing is normally a "keyboard", if you want, you have to select. When you are on the desktop of your computer, is there an icon on the taskbar keyboard? If it is not visible in portable mode, then see if it is in tablet mode. If this icon, click it. This should bring up the soft keyboard. On this keyboard, the key down-right should be another icon on the keyboard. Select this icon, then select the pen option third option). This should change the touch keyboard with a keyboard of transcription.

  Good luck. Let me know how it goes.

  Adam

• How can I disable the software of pictures?

  Anyone know how to DISABLE (OFF) the photo software? Whenever I insert a memory card in my card reader Photos opens, I uncheck the box that says "automatically open" (or something like that) and the next time I insert a card, it opens again, in any case.

  I tried to remove the program, but it will not erase. I can't get rid of it! A bit like my second wife, actually...

  I am a professional photographer and when I have clients standing with me who pay me a little large per day and this stupid Photos opens whenever I try to do something on my computer, it is really unprofessional.

  I need advice that will stop this stupid popping up software all the time.

  Thanks in advance...

  Try this trick.  http://osxdaily.com/2015/05/31/stop-photos-opening-automatically-Mac-OS-x/

• Satellite P10-304: the problem writing and erasing CD - RW discs

  Some need help pls. I own a Toshiba satellite P10-304 with a combo player SD-R2412 installed. When I try to burn a new CD - RW, it does ok, but wouldn't allow no other written on the same CD in another session. The written CD - RW is then recognized as a CD-ROM. In addition, it is not possible to erase the cd - rw usinig this player. When I take the cd written for my laptop office of deletion, as it's done with success and my toshiba can then burn again. Any ideas on what to do?

  Additional information: laptop computer came bundled with "drag n dro cd" but I had to install Roxio and even tried the cd writing software provided with windows XP are done everything to nothing. I checked the 'advanced system info-error log' and the report there is 'the device, \Device\CdRom0, has a bad block'; I don't know what that means.

  Cheers.

  Nthunderbolt

  Hello

  In my opinion, it's probably caused by software. In my opinion, you should remove all burning software and verify all burning functions with windows option. After deleting some software, it can happen that, in the registry editor it is a lot of waste that will not be removed completely.

  In any case, delete all the burning software, and you can also try to remove the device from Device Manager DVD. Restart the laptop and DVD should be detected and installed correctly. Try using the option of engraving of Windows and if there is still problem writing once again please.

• Need a Wi - Fi for Satellite L755 Manager software

  After I've upgraded to Windows 8 last year I'm confused in the face of the connection to the WiFi of my Toshiba Satellite L755, even me, I pilot last installed for Wi - Fi, but there is no software that compatible with my laptop Wi - Fi Connection Manager, I try several times to connect to Wi - Fi and it connects by chance only.

  Is there that a Wi - Fi connection for laptop Toshiba Manager software can be useful?

  In general you don't need special software for WLAN connection and it should work with Windows settings only.
  Maybe it sounds stupid now what software do you mean exactly? ConfigFree maybe?

  Wireless network adapter must be properly activated so that your computer can detect your WLAN. When you click on the WIFI symbol in the taskbar you will see listed all networks wireless detected in your area. Click on your WLAN and click on Connect. Of course you should choose option to connect automatically, so each time when the laptop detects your mobile phone WIFI connects automatically and you should have full access to the Internet.

• How the * fact pick from Microsoft that they deal with the problems of software?

  OK, so I just got a phone call from people "Microsoft" Software, saying that there is crazy with my computer problems. The person who I understand only thanks to a focus then directed me to look at the event viewer, so I could confirm a problem with the software, the person went to a lot of boring details about the problem, then directed me to go to https://secure.logmeinrescue.com/Customer/Code.aspx which i then did and after reading very naively all and not have noticed something wrong I gave on my laptop to be remote controlled, which resulted in the person taking me to this site http://www.pcsoftwareservices.com/ then this http://paymentgatewaynias.com/pay.php as if the person was going to force me to pay for something, I can't afford right now. And the person on the phone several times to say 'If you don't do this your laptop will be blocked for life. The person asked me if I had a boyfriend who has the credit/debit card I could use to pay 'Insurance' and if I had not noticed what was going on on the person to remotely control my computer would have gone through all the videos of my webcam. Therefore I had to unplug my laptop and shut down my computer, because even if I tried to control my mouse "technicians" are the one who had the most control. So my question is how the * does the person get my number, know so much about my computer?

  Hey, Viktoria,.
  I'm sorry to hear that you were almost scammed. But I'm glad that they didn't get away with your money. The one who called you, it's NOT a part of Microsoft at all.
  (It's actually a big scam keep us track of, but just as the Prince of Nigeria offering you millions, for everyone that we're closing, two more replace it).
  Defend your self with knowledge of this scam and how it works! Also I see that they did not have access to your system for a short period of time, I think it would be best to run all necessary safety programs, this thread has a lot of good advice. I personally use Microsoft Security Essentials and have yet to have whatever it is slipping by.
  Also if you save your passwords in your system, I think it would be a good idea to change these, I don't want something else goes wrong, and again, I'm sorry that you had a bad experience, but fear not, they are not Microsoft :)
  Thank you for using Microsoft Answers! I'm moving your thread to the section Windows security now that we understand what really happened.
  If you have any questions, we have a wonderful community here who would be happy to answer those for you.
  -Robert P.

• Worthless idiots

  Adobe must be the worst game of developers, I've ever met. Even this forum works correctly when you press on the back, you lose your original request!

  Adobe Muse is nothing more than a worthless draft which is far from being ready for the prime time. I lost 2 days until this just try to do the simplest thing (scaling an image at 100% to adapt the browser and be as responsive). Both for the delicate design!

  I guess I 'should change my plans and redesigning my site to meet the needs of this delay known as "Muse". I guess I could try to Dreamweaver, but seeing Adobe who now owns, it's probably a piece of garbage so nightmare. He was pretty good when Macromedia owned it.

  About the ONLY thing that Adobe did right is Photoshop. Everything absolutely sucks and I've been in this game for more than 30 years and I've used hundreds of CAD applications for graphic design, photography, music and video production, etc., etc. Adobe always sucked and will always suck. If you want the more convoluted, confusing and ineffective way to do any task, are looking to Adobe. They are the MASTERS of stupid!

  Good luck people. Until someone else comes along who is PROFICIENT at writing software, I guess we are all stuck between Adobe and Microsoft, the Abbot and Costello software universe!

  I'm NOT amused!

  Bob Lee

  Instead of time spent writing this, maybe he would put to better use politely asking for help, which is what these forums are for. No software is perfect and there will always be bugs; what the team did with Muse is exceptional and definitely not worthy of your ranting.

  Mac is well informed and respected member of the community, and for the record, his mother tongue is not English, so your "pre-pubescent" on its grammar remarks are also unfounded.

  Please think about others before wasting their time with your useless literary anger.

• Someone has just a difficulty to stop to open with the home page homepage?

  I see that this problem is widespread, but some of the 'easy' patches are for computer geeks only. I would like to know if anyone could tell me how to get rid of the home page without delving into the bowels of my computer? I'm not writing software, and I'm not going to jump through hoops to try to get rid of this nuisance.

  There must be more people like me who look at some of these answers and think, 'What?'... especially when you see what you see apparently when you "walk through" the steps to correct this problem.

  I think that Firefox should address this personally, since it's their update that we screwed everything. Supposedly, updates are supposed to make us 'ready to take advantage of the latest speed, flexibility and security. Yes, good. How to fix this bug, Firefox? Instead of making your users solve problems for you. This is ridiculous.

  If no one can help me to solve this problem without having to get a degree in computer science, can someone tell me how to get rid of the update total? I'll take my chances of NOT being "ready to enjoy the last speed, flexibility and security.

  I'm sorry for the frustration, but it's just simply unacceptable. We shouldn't have go through it whenever we update. Thanks for any help!

  See? Complicated. I'll just live with it. Thank you.

• Satellite A100 hangs after hibernation / suspension

  Hello

  I have a new A100 with Vista installed. Everything works fine, but there are two REALLY boring problems.

  1. after the suspension or wintering, Vista often hangs when you try to connect to internet/network. I know it's a question that I've seen other people writing similar things on other sites. Y at - it a cure?

  2. When blocking down after using the net, I am often a message that Adobe Reader has a lot of open pages and I can't stop.

  Thanks for your time.

  Hello

  Vista often hangs when you try to connect to internet/network
  (1.) you want to tell the WLan or LAN?
  It's not easy to offer the solution in this case believe me Dimitri. Test and Binder are what you could do, what version of BIOS do you use? Check if the new version is available on the Toshiba page. Sometimes, the update of the BIOS might help.
  Further, you can try to disable the option in energy-saving Wlan/Lan Card properties and try to update the drivers.

  2.) this only happens on my laptop 2 different. But I don t use the Vista but XP.
  From time to time I m not able to stop because a message appears saying: Adobe acrobat reader runs in the background and can not close.
  In this case, you can try to reinstall the software Adobe reader and try to clean the registry with an application of part 3.
  Additional you may stop loading the acrobat reader at the beginning. Simply remove the entry from the registry RUN acrobat reader

• Compatibility of DAQmx windows8/windows7/windows xp

  Hello

  Do not know if it is a problem other people have noticed-, but I have an application that runs on windows 7/windos XP - who worked mainly outside of a few problems when some code necessary to recompile when it was moved.  Recently however we got a new computer running windows 8.1 - and installed labview on it – only to find that all the screws with daqmx measurement are now broken - because it does not find the screw OK for setting in place channels etc.

  I have all the correct modules installed and in principle he could fix the screw that is affected by the creation of a version of win 8 - but he should keep both versions in parallel - which sucks.

  Any thoughts?  I can force it to be smarter where it looks like - or reinstall it so he moved to the right place?

  Hi JP,

  There should be no compatibility issues between Windows and LabVIEW 2013 8.1, it's the same combination that I use myself on my personal computer. The first step that I recommend is DAQmx resettlement. You can remove this writing software from National Instruments in programs and features in Control Panel. I do not know which version you are using at the moment (it might be helpful to know if you can find), but you can download the latest version of our website

  I hope this helps!

  Kind regards

• Scripted installation crush LUN SAN FC

  After an incident, I was the only one to take the blame of I want to start a discussion on a scripted installation problem.

  We used a script to kickstart to a wide configuration of our ESXI 5.x several times. This time, I adapt a kickstart to an ESXi 5.1 U1 (custom HP) script and I forgot to disable the FC connection from the blade server. Subsequently, installing replaced a vmfs LUNS DATA and I had to restore several VM´s running with a lot of discussion later.

  That's why I want to ask the community if someone really smart guy looked at this issue before to keep installing stupid people (me) to crush the SAn FC lun without connections stop FC?

  I added a KS.cfg of sample to give you an overview that we install.

  I would appreciate if anyone can give me advice.

  On my blades, when to use kickstart, I use the installation option - firstdisk to force th einstall to use the local disk by specifying the internal disk controller driver.  Of course, this does not work when you use the SAN boot, but if you install on a local drive, it should work.

  Example:

  install firstdisk - mptsas

  You can also add the preservevmfs - pass if you are super paranoid, but if the local disk is a VMFS, your encrypted facility likely mistake.

  Another thing that I do, it's the Image Builder CLI allows you to create a custom image that has the FC HBA deleted drivers, so the installer can not possibly access the LUN CF.  Once installed ESXi, during the kickstart script firstboot section, I have install the HBA driver.  Yet once, if you start in SAN, this won't help.

  Example:

  # Script FirstBoot

  firstboot % - interpreter = busybox

  # In Maintenance mode
  Vim - cmd hostsvc/maintenance_mode_enter

  ############################################
  # Install/configure the drivers.

  # Install HBA QLogic FC-FCoE adapter driver
  software esxcli vib install d http://x.x.x.x:8181/Drivers/vib/qla2xxx-934.5.6.0-offline_bundle-887798

• Unknown error 2130906240

  OK, so I posted this question before, but apparently not very well understood that I wrote very fast and simple, so I'll try again to see if I hope someone can help.

  Problem: I installed on my PC HP MEDIA CENTER m7360n ADOBE FIRST PRO (APP). Ive been using APP for about 3 years now. and this is the second time I have the following problem: when Im done with my project and send it to be burned to a DVD, a message appears saying "unknown error 2130906240" process in the midst of the fire. The first time it happened that I solved it by changing DVD + r, DVD - r now, the second time this question, I don't know what else it is resolved. I googled and it seems as if a lot of people have had this problem but I couldn't find an answer. Only options, for example, buy a laser cleaner (that I made) and replace back form DVD - R DVD + r Ive tried different brands of DVDs and nothing. So I would really appreciate if someone helped. I edit videos for videographers to help me pay my college and bills. and this problem is to save me. I would appreciate your help or even ideas! Thank you!

  Only use high quality blank media: Verbatim, Taiyo Yuden or Falcon Media. Do NOT use Memorex, TDK, or any store brand media.

  Depending on your burner, or + R or r could make a difference. If it is certified 'multiple disc', will not a difference on the end of the burner, but maybe on the end of the player, depending on the age and model of this player.

  Do not use RW media for any delivery - it is used for testing ONLY, and even if it works fine, will depend on your burner.

  Automatically search for updates to the firmware of the burner.

  Make sure you don't have any packet writing software on your system - things like InCD, DLA, etc..

  Don't burn at max speed, but perhaps the max 1/2 speed. I use 2. 4 x for my Taiyo Yuden media and have never had a return.

  Before a modification or creation of session, try the tips in this ARTICLE.

  Last, I'm 100% agree with Jim. If you have, use still do ALL of creation. It is so much more powerful and is a design program. PrPro (upward through ver. 2.0) has a very rudimentary feature. I never use it.

  Good luck

  Hunt