Satellite A100 hangs after hibernation / suspension

Similar Questions

• Satellite A210-SP6812 hangs after hibernation with a Wi - Fi connected

  I have a Satellite A210-SP6812 running with win XP SP3, and when I turn into suspend mode and later he attends the hibernation (I have the choice in Toshiba energy saving) it will, but after that you will wake up never the system again unless you reset the laptop.

  It is important to note that this only happens when the WiFi is enabled (Realtek RTL 8187 (B). I'm updating this driver but nothing works. Once it happened when the laptop was inside my bag and despite the hibernate after the suspension, he hooked up with all coolers & heat inside was amazing.
  An idea of the cause of it?

  Thanks for your support!

  Leo

  Have you updated the BIOS? Perhaps the problem will be solved.

  If it isn't, then it might be another problem in Windows. Maybe a 3rd driver is causing a conflict. Recovery time should solve the problem.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite A100-289: after 5.1 Bios Update powerfault on usb device

  Hey, I have trouble after you install the Bios Version 5.1 on a Satellite A100-289.

  First: there is NO external USB device connected!
  After the awakening of the laptop Sleepmode , I received a message in Windows XP the a power fault has been detected on one of the USB devices. A dialog box opens and I can "reset" the device.

  This only happens after that the laptop is awake in sleepmode, perhaps to Hibernate, but not when the laptop starts. It seems that everything works well, but this post makes me nervous.

  Can someone tell me, what is going in this box?

  What about Mirko

  Hello

  5.1 BIOS was designed for Vista but it should (or it works) also with XP!

  However, you could try updating the BIOS with the other BIOS version that is operating system independent
  or / and you can try to disable the power save option for USB ports in Device Manager.

• Satellite A100-192: after Vista installation HARD disk capacity has decreased

  I am a user of Satellite A100-192 with 120 GB hard drive. After I installed Vista Ultimate, I saw this total capacity of my hard drive completely passed to 92, 8 GB instead of 120 GB while it was XP.

  What can be the problem? How can I reach the other capabilities of my hard drive?

  Hello

  Vista needs and used 2 partitions. The second partition is not visible and it s necessary to Vista backup and restore functions.
  Maybe you have verified that the size of the first partition (C) and didn't note the size of the second partition.

  Concerning

• Keyboard Satellite A100-906 after spilled drink

  Hello

  I am owner of a Satellite A100-906 and I spilled liquid on the keyboard.
  As I read on the official website of the product, the keyboard is the spill-resistant.
  If I have understood correctly, the keyboard is covered by the warranty in case of spilled liquid.
  Is this fair?

  Thanks in advance,

  Maria

  Hello

  I think you had something misunderstanded:

  The keyboard is resistant to the spill, but that doesn´t means that it keeps water away from the machine. After checking Asian toshiba website, I found the following description:

  "A keyboard resistant splashes that increase the protection of the system by providing users with enough time to save their work and shut down the system in the case of a spill;

  That means the keyboard prevents only the liquids to invade quickly into the machine, but that doesn´t means that the keyboard is covered by the warranty after any spillage of liquids on your machine.

  Welcome them

  P.s.: That all means you will be charged for repair...

• Satellite A100-692: after an error of installation of Windows XP Prof blue

  Hello

  I bought a new satellite A100-692 with Windows XP Home OEM as an operating system.
  But when I tried to access the internet using the local area network and a Proxy Server, it does not work.

  I tried everything I knew and even ask some Forums to get a response, but nothing help.
  Then I think it can work when I install Windows XP Prof instead of the OEM Version. Because all Clients in our network work fine with it.

  But when I run the Installer (booting from CD) I get a blue screen with the message that there is a problem with the PCI (pci.sys) driver (after loading all the drivers).

  Can someone tell what I need to do so that I can install another OS?

  Thank you

  PS: Excuse me if my English is not very good ;)

  Hello

  First of all, the blue screen error message may appear due to hardware failure or serious malfunction of software.
  In your case I guess that it s a software issue because on the version OEM pre-installed, everything worked properly.

  In addition I checked the site s driver and it seems that there are drivers for 3 different notebooks to A100. In this case, you should be sure that you use the correct drivers.
  As far as I checked this laptop your A100-692 has PSAA9E number.

  But have you created a CD of drivers & tools before formatting the HARD drive? This option you will find in the assistance of Toshiba.

  However, you can download the drivers from the Toshiba site and here it is very important that these drivers will be installed in the right order!
  The chipset utility must be installed in a first time after all installations of service packs.
  The common modules are also important.

• Satellite A100 stops after upgrade memory

  Consider me the thickie Pack 1... Not sure wot im talkin end but n e way...
  Have a Satellite A100 570 (PSAA2E)...

  Tried several websites online lookin for memory upgrade. Did not have the witt to use the toshiba site... Eventually get to the point...
  Ran the Diagnostics on laptop and sent module one needed.or so I thought... wrong 1 or 1 s I bought 2 x 1 G modules in order to 'double '...

  Got my money because they were not compatible with my system... something to do with the problems of density...
  Tried company called OFFTEK... they seemed to know what they were talkin' about... I'm Offtek. at present one...

  200-pin 1.8V SoDimm PC2 - 4200 DDR2... but Toshiba recommended below...

  1 GB memory DDR2 PC2-4300 (533 MHz)
  Part number: PA3411U-2M1G
  1024 MB (1 GB) memory PC2 - 4300 DDR2 (533 MHz)

  Theres an obvious difference... 4200 and 4300. But I'm not sure if there is a significant difference... or what it means
  Update the bios to the version latest and basically put all that toshiba had to offer for this model...

  EVEREST ran and it recognizes the module 1 G but when I pull out the original 512 MB module, the laptop starts for about 3 seconds then stops...
  This repeats about 5 times then fill stop...

  I don't like open the back cover too often but it's the 3rd module...
  Don't know what is supposed to happen if the module works... IE launch message... dunno if windows recognizes module 1 G...
  Would be - this bet safer to send Offtek module and stick with option of toshiba...

  Thanks in advance...

  Hey Buddy

  Have a look here:
  Memory for Toshiba Satellite A100-570
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=23658&ft=m&St=3

  You can use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM bars!

  The pc2-4300 Rams are the same as PC2-4200. It s just a marketing gag PC2-4300 are PC2-4200 modules that can be overclocked by some versions of BIOS PC desktop

  However, you must take the PC2-4200.

• Satellite A100-785 - after the virus the bus USB and wireless do not work

  Hello
  I have a Satellite A100-785 with Vista 32 bit.

  I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
  I downloaded and installed a new driver for my model, but it does not work.

  Help, please!

  And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
  See:
  [http://i39.tinypic.com/rw4f8p.jpg]

  Hello

  You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

  If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

  Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
  In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you can t create the recovery disk, you must order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Black screen on the Satellite A100-712, after Bios Update

  I bought a new Satellite A100-712 and I did a bios upgrade, everything was fine in windows and restart the laptop got it is pasted on the toshiba black screen that appears when you turn on the lapto.

  Any suggestions please, I would be very grateful

  It doesn't sound good. I did the BIOS update on two laptops A100 and everything was OK. Sorry, but I think that you will not be able to do anything alone. I recommend you contact the service authorized in your country as soon as possible.

• Satellite P205D freeze after hibernation/standby in Win7

  Hello

  Satellite P205D my daughter has just been upgraded to Windows 7. fine, except that now, it freezes shortly after the resumption from standby or hibernation. Minidumps just point to a "hardware". We executed the installed Toshiba installation software (it was a 'clean' installation), value added package, and updated the BIOS and 1.7.
  Any ideas what could be casuing the problem? -J' I assumed it was a suspended driver, but would have thought that they would have to day now.

  The only thing showing a problem in device manager is a (probably from a USB stick) USB mass storage controller, but that the deactivation has no effect.
  Thank you

  To be honest on this virtual path, it is not possible to provide the exact diagnosis. We don t know what you did exactly, which drivers, tools and utilities installed and install the who do you follow.

  Can you maybe provide more description on the OS version, driver installation, installation of additional software or anything else that can help a better understanding?
  Some external device is connected to your laptop, run some additional software?
  What it looks like in Device Manager? Everything has been installed correctly?

• Satellite M40 - starting after hibernation problems

  Hello
  I have a following problem, I used two OS linux and win xp, but one day, I decided to delete the linux partition, and there is the problem.
  I was using the LILO Boot Manager to switch between operating systems. After you delete the Linux partition, I run Win XP and selected Hibernate.

  Then the system is not successfully restore (probably a problem with the MBR after you have deleted the linux partition) and show that the screen full of strange characters.
  'C', "f12", changing the settings of the bios does not help because win xp hibernation somehow has a higher priority.
  For I can start from everything even to original Toshiba Recovery CD, because HDD ist first start eitherway.
  I had earlier experencied that when I put in hibernation Windows, the boot parameters changed in the BIOS where used first after I close Windows normally down.

  What can I do? Does anyone have an idea?
  Can I somehow my laptop out of hibernation while turning on the power?

  Thank you for your advice in advance
  Rafael.

  Hello Rafael

  Of course, you're very impatient. Joke!

  In my opinion, there is a problem with the MBR. If you start the device information stored in the MBR should give first info where is all the work saved on HARD drive (in hibernation mode).

  I n t have concrete solution, but if you don t want to use Linux, you should back up all your important data and reinstall the operating system using the recovery image. After that the unit will be clean preinstalled and everything will be perfect.

  Good bye

• Satellite M45 hangs after startup

  Hi people,

  I got by Satellite M45 and it's almost 3 years, I use it. Now he started to gel after starting. So I formatted using the recovery DVDs, even now he kick survey and if I click on the start menu it freezes.

  Someone has this kind of situation? Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

  Thanks in advance.

  Hello

  > Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

  You must understand that no one will be able to say exactly what's wrong.
  Several tests are needed to find the fault.

  If you reinstalled the operating system on the HARD drive and then I n t think that the HARD drive would be malfunctions.
  I had a similar problem on my 6 year old laptop. Laptop computer frisotté after 2 min.
  After a long investigation, I discovered that one of the memory slots would be defective, because the two modules worked correctly in another location.

  Of course, in your case, it could be a failure of memory but it's only a suggestion or suspicion. You know

• Satellite A100-847: after the new Virtual Sound Setup XP installation reports problem

  Hello

  I have a big problem with Toshiba Virtual Sound after installing Windows. After new installation Windows XP (Orginal CD not Toshiba Recovery Disk) and drivers (latest) the problem of the Virtual Sound Setup Report: is not possible to install Virtual Sound because not present this material!

  After you have reinstalled Windows, everything was OK (with Toshiba Recovery Disk). Thank you

  Hello

  Can I ask you what phone you have?

  You said something about installing all the drivers (most recent).
  Do you install all the drivers needed and just?
  The laptop runs correctly after installing the Toshiba Recovery CD because this CD contains all the drivers and all the important tools
  It occurs to me that you have not installed the drivers required

• Satellite A100-036: after installing XP some drivers are missing

  I need a few identify technology memory drive and the adapter host SD because after I installed windows XP I found all identify it in my system, but those two things that I've asked about it is not showin in my drive.

  Please me Tips how to get back as that usually... check the images below. It will show you the difference between the photos... and see the missing will identify in my pc...

  http://www.l22l.com/l22l-up-1/e7949d42ff.jpg

  http://www.l22l.com/l22l-up-1/a14bc219ee.jpg

  Thank you very much for you support...

  Hello

  You have installed everything according to Instructions of facilities document?