Sub - VI preallouee clone seems to be intermittent who no longer respond. What's wrong?
Instead of looking long and hard for what would be a stylish vi I made my own. I don't understand why it does not periodically:
I have a situation where I want to delay the change of an integer value in a specific time. It is in a deterministic loop and cannot block. OK, so I made the vi joint 'whole Delay Change", which worked very well in the beginning.
After other changes to the code and multiple deployments to a crio 9068, this VI suddenly become unresponsive. While running interactively, the VI owner seems to work properly, the indicators of debugging on the wires leading to the correct vi display data, but this VI will not refresh its FP to correspond with the values linked to its terminals. If I run it by itself on the target and play with the front panel, it works as expected/designed.
I feel that I can use a while loop and registers at offset and it does NOT behave like a FGV (i.e. can be used in different places for unrelated purposes) so it environment. This problem occurred while it is configured for reentrancy preallouee clone.
What I am doing wrong? I hope that this will be part of an embedded reliable application and would be delighted to learn from a mistake in... I humbly accept all the suggestions on how to make this better/more intelligent/easier.
Thanks in advance.
You only change the integer if you happen to check when the time is EQUAL to the regular change time. If you are unable to check it while a millisecond and then it will not change until that timer MS surrounds to 4294967295 ms, which is rather insensitive. Normally for time-out calculations I subtract from the old times of the new time and check if it is greater than or equal to the timeout.
Tags: NI Software
Similar Questions
-
While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?
This could be a case of interference. Read this document about it. Think about the suggestion of new electonic or other nearby wireless devices. I recently read the someone pen wacom being the culprit.
Potential sources of interference Wi - Fi and Bluetooth - Apple Support
-
Original title: Anti virus
My anti virus AVG expired and AVG doesn't seem to have a new FREE program. What should I do?
Before installing Microsoft Security Essentials to ensure that you have removed the remains of any other previous and present antimalware programs (AVG, Avast, Norton, McAfee, etc.) by using the methods and appropriate cleaning tools / uninstall each program.
For AVG,.
AVG Remover Tool (avgremover.exe; avgremoverx64.exe)
http://www.Avg.com/us-en/download-toolsAlso, be sure to carefully read the following:
Checklist for installation of Microsoft Security Essentials
http://answers.Microsoft.com/en-us/protect/Forum/protect_start/check-list-for-installing-Microsoft-Security/bf757e6a-E320-4a67-92bc-767e6acb26c4I hope this helps.
-
Hello, I originally bought CS5 Production Premium for Mac in 2010 and I would now like to move to another machine. I can't have my serial number on the site because no product seems to be attached to my login. What can I do?
Try to contact the Adobe Support via chat and see if they are ready to help you.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp -
For years, I used iPhoto to edit my image - sharpness, contrast, highlights/shadows, Lighten/Darken points. Since the update to OSX 10.11, iPhoto has disappeared, replaced by pictures, which seems to have very little editing tools. I am disgusted. What are the options should I now? A friend suggested using Adobe Lightroom.
Use the Extensions:
Read here: Edit your photos using third-party extensions in Photos for OS X - Apple support
Search Photo extensions on the Mac App Store
-
My computer seems to be not very hot lately. What should I do?
I had questions 'freeze' screen lately and the bottom of my
computer seems to be very hot, what could be and what can do?
The inside must be dusted regularly semi. The system overheating very quickly will be a build-up of dust. Is this a desktop or a laptop?
-
Issue. I have CS5 on Windows desktop 8.1 which I'm unable to update due to the repeated download error (no error number). I uninstalled and reinstalled CS5 but the same error occurs. I have same CS5 on Windows 7 laptop which seems to be up-to-date. What is the problem please?
Hi Peter,.
Please see the updates
Hope that helps!
Kind regards
Sheena
-
On competition of modules
This is the contest you want to say? http://blog.mozilla.org/addons/2012/04/24/tell-us-about-your-favorite-add-on-for-a-chance-to-win-one-of-three-android-tablets/ . If you try to write the comment has a comment on this blog post, it won't work, you must follow the process on the form.
-
The ForecastFox add-on seems to have downloaded, but has not installed - what I do?
I just upgraded to Firefox 4, and the feature that has always given me the time in Paris down down disappeared. So I downloaded the add-on ForecastFox, reboot of the blow when he told me, and absolutely nothing has changed - I don't see the time anywhere, and I have no idea how to find the add-on. Can I go back to the old Firefox?
Please read this post:
http://groups.Google.com/group/Forecastfox-users/browse_thread/thread/1efdee4e3a3d8b17
You have the menu bar hidden?
-
My imac seems to be running slower and slower. What can I do to speed it up?
My imac is running slower and slower. What can I do to speed it up?
Dale,
Are you really still run 10.6.6 as indicated in your profile, it is important because it determines what to try next.
-
I just download El Capitan to my IMac mid 2007. I can't find my application. Where is he? How can I get?
Thank you
By 'lost', do you mean the app disappeared completely? Upgrade to El Cap should not 'remove' the app.
Newer versions of Aperture are compatible with El Cap.
Go to Finder - Applications - see if your app opening is there.
If so, has he the "circle with a line" above?
-
I reworked the code to make it without error. now, all we are dealing with is the problem of ERROR REANGE. I'm very new to Flash and read responses from people on sites where they solved this problem, but do not understand what people at all. any help would be greatly appreciated.
Let me explain a little better my problem: I am creating a menu drop-down. everything goes fine UNTIL I'll scroll above the button and get the error. I added an inner glow, etc and it all works very well. I'm only stuck to where the menu is supposed to go down.
CODE 1:
var navBtnGlow:GlowFilter = new GlowFilter (0 x 000000, 0.5, 0, 15, 1, 2, true, false);
navBar_mc.addEventListener (MouseEvent.MOUSE_OVER, navOverF);
navBar_mc.addEventListener (MouseEvent.MOUSE_OUT, navOutF);
function navOverF(event:MouseEvent):void {}
event.target.filters = [navBtnGlow];
navBar_mc.setChildIndex (event.target as MovieClip, 1);
dropMenus_mc.gotoAndStop (navBar_mc.getChildAt (1) .name);
trace ("we rolled on..." + navBar_mc.getChildAt (1) .name)
}
function navOutF(event:MouseEvent):void {}
event.target.filters = [];
}
ERROR:
RangeError: Error #2006: the supplied index is out of range.
at flash.display::DisplayObjectContainer/setChildIndex()
to NEWprim_fla::MainTimeline/navOverF()
Thank you for your help in advance.
not sure about this, but what happens if you change your setchildindex to 0? in the navOverF function
-
The tabs are open not together
I recently got a new Windows 7 laptop and decided to use Firefox Sync to move everything related Firefox above. I think that all this, and I'll go through later do not forget to add my Greasemonkey scripts and elegant. Everything was going well... until I started to open new tabs. Each tab open in a new tab to the other end. The tabs are not stuck together. I checked my settings and everything seems in order. I can't understand what is wrong.
You can change a preference to open tabs
- at the end of all tabs open
- immediately after the active tab.
NOTE: There is also an option in Tab Mix Plus (which is listed in your Extensions) in the TabMixPlus Options events > new tabs. See TabMixPlus settings-> http://tmp.garyr.net/help/ (scroll down to the settings section)
See: http://kb.mozillazine.org/About:config
- Type of topic: config in the URL bar and press the Enter key.
- If you see warning, accept it (promise to be careful).
- Filter = browser.tabs.insertRelatedAfterCurrent
- Look at the column 'Value' (' false= open to end, real= open after the current tab "); Value = true is the default value.
- Double-click this preference to switch the value from true to false and false to true
- Restart Firefox (file > restart Firefox)
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
Hi all
I'm trying to detect if the Wifi is available so that I can enjoy the high connection speed Wifi. After reading all the discussions on wifi, I came up with this code, but it doesn't seem to work. Can someone tell me what is wrong with him?
Thank you for your help.
public static boolean isWifiAvailable()
{
Full book full book;
ServiceRecord serviceRecords [---]
full book = ServiceBook.getSB ();serviceRecords = serviceBook.findRecordsByCid ("WPTCP");
for (int i = 0; i)< servicerecords.length;="" i++)="">
ServiceRecord serviceRecord = serviceRecords [i];String recordName = serviceRecord.toString ();
If (recordName == null) {}
continue;
}If (recordName.startsWith ("Wi - Fi")) {}
EU wifi
Returns true;
}}
Returns false;
}Try replacing:
recordName.startsWith ("Wi - Fi")
with
serviceRecord.getUid (en) .toLowerCase () .indexOf ("wifi") > = 0
It's:
What - in different ways to establish an HTTP connection or socket
Article number: DB-00396http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...
Refer to the WAP 2.0 section and note the code to make a distinction between WAP and WiFi Service records. -
Why did google chrome constantly crashing and needing to be revived?
I can ' t disconnect from a program or even change screen sometimes with a message asking if I want to restart Chrome or I get a message saying that the site I am at is "become insensitive".» Rarely, chrome crashed using Windows 7. I do not have something to 8 which I n 't have to do in seven. Is chrome installed not right or do I have a parameter that is the cause. What is a software implemented in my computer? I have and you are running norton 360 on a regular basis. There are so many things to do and see on the Internet but it seems I'm always trying to figure out what's wrong. Help
its so easy to uninstall the browser google chrome & so easy to reinstall? Before you reinstall, restart the computer.
http://www.Google.com/intl/en/about/products/
Even with Norton - which I think is probably the problem.
https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us
Maybe you are looking for
-
How can I keep Firefox 22 update my site of the University being incompatible with later versions
By taking courses online from Northern Arizona University, told me that the University website does not work with Firefox 23 and 24. Before can register it for this course of study my computer was updated to 24, as is normal. I downloaded the version
-
iMac 27 "2012 wake from sleep does not start
Lately, my iMac 27 "not correctly woke from sleep mode. When I try to enter the password, the computer manufactures its own string of numbers in the box and then refuses to open. The only way I can boot the computer should turn off by the button on
-
How can I reinstall exteder for windows xp
I received an answer on how to reinstall the drive Extender for vista but I need to know how eInstallez the extender for Windows XP player, any help is appreciated thanks
-
Windows Media player & zen nano won't be out of sync now.
Original title: Drive multimedia & zen nano will not sync now. Can someone tell me why my Creative Zen Nano Plus MP3 player does sync now in media player to allow me to put music on it. It used to be recognized automatically when it is connected to t
-
Hey guys,. I have a HP Pavilion DV7 with graphics switchable 4085sf (ati and intel) and I want every time when I opened the laptop to start on GPU GPU performance not saving. How can I do?