Submenu to the menu accordion

I am implementing a mobile menu Accordion with submenus for my site using widgets in muse. When I click the button on the top menu, it evokes an another menu accordion sounds. It is on the right side of the button that is not covered by the key where I would have preferred. Also it does move the other buttons of top-level below it when it is open. All solutions?

Hello. I'm sure that you have already solved this problem. I was helped, that's the height of expansion to 1 pixel box (you can't set to 0 from June 2016). Then I put a hypertext link in the menu to the page that I need.

Tags: Adobe Muse

Similar Questions

  • Using the Menu accordion - expand all Option

    Hello

    I was wondering if there was any possible way to extend to all the options of the menu accordion. I understand there is a 'Collapse All' option, but it would be really useful if there was a way to develop all the options in the menu accordion. If there is no way to do this directly, are there other options, either by creating a button or a link that would lead any of the accordion to develop options. Help, please! Thank you.

    Please do not hesitate to add your suggestion in our ideas section.

    Thank you

    Sanjit

  • We lose the choice to close the menu accordion initially.

    After the update. I'm not able to close the menu accordion, and I see not option close to departure. Thanks for the help.

    http://www.highestgoodclothing.com/_blog/Highest_Good_Clothing_Blog

    Before the update from the acrive tab was closed initially.

    "Close it all initially" option in the Panel of the accordion has been replaced by the new behavior that allows an accordion to be reduced in Design view. Refer to the notes of version 4.0 of Muse on the next page for more information on this and other improvements of Widget - http://helpx.adobe.com/content/help/en/muse/release-note/adobe-muse-release-notes.html

    So in your case, you just have to activate the option 'Can close all' for the accordion panel (if it is not enabled already) and close it in Design view in so she can be reduced by default on publish. This is another improvement in widget panel in this version where the Panel selected in Design view will now be selected/active when previewing, export or publish the site on Business Catalyst.

    Thank you

    Vinayak

  • Separate submenu in the menu

    Can we separate the submenu in the menu? It is usually possible to split a menu and arrange them differently?

    Hello

    Try a few suggestion by Vikas in the thread following positioning of the submenu

    It may be useful

  • Problem with the Menu accordion Mobile, try calling the phone number

    I created a menu accordion on the mobile version of my site, and each link is trying to connect to a phone number, not the actual page, it must be bound (such as 'home', 'about' 'contact', etc.) I tried to clear more of master and departure, but it does the same thing...

    Your main manu works fine at my end, but you have an extra trigger on the phone's home page that sits on top of the relaxation of manu.

  • Submenu of the menu Spry restores do not correctly on IE

    I am working on a menu left vertical spry has several submenus fasteners.  When I download the page in IE and hover over the menu items that have submenus, the submenu in the top right of the menu, any distance to the bottom of the list.  The spry menu actually works fine on firefox and chrome.  Unfortunately, a lot of people who will be viewing this page using IE, and I need to make it work properly on all applications.  I would paste the code, but am really not able to do.  Any ideas why it wouldn't make properly on IE?

    Spry is dead.  Nobody uses it more.  Adobe abandons Spry in 2012 because they have outlived their usefulness.  They're not receptive & don't work THE right on modern or touchscreens (iPads, iPhones, Androids, etc...).  Take this opportunity to replace your current menu with something better.

    CSS3 drop-down Menus

    http://www.red-team-design.com/CSS3-dropdown-menu

    Pop-Menu Magic3 of PVII (commercial extension of DW)

    http://www.Projectseven.com/products/menusystems/pmm3/index.htm

    Nancy O.

  • Is there a way to get the submenu above the menu item?

    I'm creating a digital magazine I need to a menu at the bottom with a drop-down list for the pages, which I obviously need this submenu to go up because the menu is at the bottom.

    I was playing with the settings but I can't seem to make it work. I forgot something, or it's just not as simple as that?

    Arviage,

    Yes, you can accomplish a submenu "move up", but not by using a typical submenu item. Create your menu down as you normally would, but your submenu in the context of a widget of composition and place the transparent trigger on the menu item that you want to appear.

    Follow this video (starting 16 minutes) and see if that helps - it should show you how to create the submenu of the composition and to your application, simply let you shoot at the bottom of the composition to create the effect of "moving upwards":

    Muse Jam Sessions_97_MuseFall2013

    If it doesn't make sense, let me know and I can send along a video of doing me this feature myself.

    -Emily

  • Is there a way to develop all the options in the menu accordion?

    I wish I had all the tabs in the menu expanded accordion. Y at - it a setting or a button to have all extended options? Thank you.

    Thanks for trying to help people if I can, if you put all the years in an accordion rather than a series of accordions, then you could open/close the entire batch at once, this subject comprising the years in three accordions, 1998-2003, 2004-2009 (2010-2015), so at least theres a good piece of information available / visible to the departure?

  • How to remove a tab in the menu accordion?

    I have a page that I created for my Web site, which offers a menu accordion on that.  Initially, I created the menu in Dreamweaver CS4 using the Spry Accordion Widget, then transferred this code to the page of the site.  The words in the menu, I use images for each dropdown tab menu.  I'm trying to remove the last tab in the menu, but every time I do my entire menu no longer functions and the tabs, when you click on it, is no longer fall down.

    http://www.tocico.org/?page=2015_workshop_test

    Above is the link to the page I'm working on.  The last tab of the menu called OCD (over the button register now) thought processes.  All I want to do is remove this tab, but when I do, everything on the menu no longer works.

    Please let me know if you need anything else from me.

    Nevermind, I was able to understand.  After that I had deleted lines 631-644 the code had changed for some reason any.

    CHANGED TO THIS:


    TO DO THIS:

    //

    []] >

    It turns out that I was just missing the code at the end.  Thanks for your help!

  • GENERATION OF THE LDT FILE FOR SPECIFIC SUBMENU OF THE MENU

    Hello

    I am creating a menu using the script below in the TDL file.

    $FND_TOP/bin/FNDLOAD apps / $CLIENT_APPS_PWD O Y DOWNLOAD $FND_TOP/patch/115/import/afsload.lct ICX_POR_SSP_HOME.ldt MENU menu_name = "ICX_POR_SSP_HOME."

    It works very well. If 10 submenus are attached to the menu, it generates all the submenus using script above in the TDL file.

    My requirement is, I want to generate LDT only for some specific subemenus for this menu.

    Is there any script or any other alternative to it.

    It is very urgent, please help me as soon as possible.

    Thanks in advance.

    Hello

    You can use the PARENT_MENU_NAME and SUB_MENU_NAME parameters to try to only get submenus you need. This works if you only need a submenu, or submenus are appointed in the same way. You could also manually delete submenus you don't need the ldt generated.

    It will be useful.

  • Spry submenu of the Menu has a white line down side and bottom

    On my site, http://isuckatgolf.NET , the submenu horizontal spry has a white line on the right side and the bottom in Internet Explorer only. Does anyone have an idea how I can get rid of him?

    a guru figured it out for me.

    It's in the selector of the iframe. He must have had border- color: transparent

    Fixed.

    Thank you

  • Pinning disables menu accordion content to push the low mode

    Hello

    After reading the discussions, solutions, ideas on the menu accordion and the problem with the push down mode I am still facing this problem. But I think I found about what the cause is... but I don't have a solution. I hope someone can help me!

    Brief description:

    If I pin the menu accordion, pushing it to the bottom of the mode does not work anymore. If I remove it, it works. But... I want my menu to stay at the top of the page.

    Is this a bug or I think too much inside the box?

    I did an example and viewed, you can see them below.

    I tested it while 768 ipad size.

    First of all, you will see a menu pinned accordion and the result.

    Picture 4 and 5 show nothing pinned to the top, and the accordion pushed the content down.


    Then... I'm doing something wrong? Or is this a bug? And does anyone have a solution? Thank you very much!

    Best regards, Saskia

    (1) pinned at the top menu accordion

    muse-1.png

    (2) mode sensitive page

    muse-2.png

    (3) size of chrome dev ipad preview. The menu overlaps and is not pushing the content down

    muse-3.png

    (4) I have this the menu accordion markup in the master page

    muse-4.png

    (5) which is a part of the solution, the menu push the content down, but now I don't have a menu PIN...

    muse-5.png

    There is no bug, but expected behavior. Pinned objects are not allowed to influence others. The behavior of older versions of Muse is deemed be a bug by the Muse team.

    My personal opinion: this certainly makes sense. According to me, it's a bizarre behavior, a menu pin, which allows other content to flow beneath him, pushing thie same content down once again, when you use it.

  • Menu accordion without closing the point selection (Mobile site)

    Hi, I am building a site with an accordion menu for scroll a page navigation. The menu works very well because it is closed at the start and goes down on the press to reveal navigation, however once the user selects the item they wish to naviagte to the menu still expanded. Preview of Muse, it's working properly, the accordion of closing, once an item is selected, but in-situ (the site is hosted on BusinessCatalyst), it does not work. I tested on Android and Iphone using the chrome and standard browsers, none of them work as expected. The site is here: www.cordellhouse.com

    Any help gratefully received!

    Sorry for that! My bad...

    I just watched your mobile version, and I could see that it does not close after you make a selection. You can also test it with this link, without using a mobile device:

    http://cordellhouse.BusinessCatalyst.com/phone/

    I'm afraid it's an incompatibility between an extract of the Muse and the 'real world'. The menu accordion is not destined to become a menu collapse, with the obvious behavior of allowing users to select and navigate. As a matter of fact, in a situation where users would read major texts in an accordion, they wouldn't be happy to close automatically when you navigate to the page. Only refreshing or revisit the page requires the accordion to close itself.

    The only workaround I can think of, is to make it clearer to the user to manually close the menu. (Use an 'x' or something.)

  • Menu accordion all pushing on the page down the opening. Help please?

    I have some difficulty to get my menu accordion nav to work properly. The link is here: Homepage. Click on the menu item that says 'Catalogue' on the left side of the page. Everything under the it on the page is pushed down when the menu accordion develops, including the slide show. I want just the elements directly below the menu (the boxes that say 'MY SUBMISSIONS' and 'COMPARE of PRODUCTS' and social media icons) to be pushed down and everything (slide show) to stay put. Does anyone have this same problem or knows how do the menu accordion affect only the elements directly underneath?

    Hello

    I now have the fix.

    You just need to combine the slideshow with any other object at the top. Then it should work.

    Concerning

    Vivek

  • Menu accordion and push content down option does not

    Hello, I have problems trying to get my menu accordion in the 320 and 480 breakpoints to push the content down. I have read other similar issues in the adobe forums but saw that it was because a user was using "effect of scrolling through the menu accordion movement". I don't know what scrolling is movement, and I don't know how to check if this might be the reason why my menu accordion is not pushing my content down. I also saw that pinning the menu accordion can cause this problem, but mine is not pinned either. I already checked the box that says "can close all" and unchecked "overlap the items below.

    In addition, I tried to publish my site on BusinessCatalyst so I could include a link but it does not publish the latest version of my site. He published an earlier version that is not a menu accordion on small breakpoints. Please advise!

    Your last question is probably a cache problem. Clear the cache of your browser, and then try again.

    A. you try to close the accordion before publishing? If this does not work, please copy the accordion and the object below a newly created document .muse, transfer it to Dropbox or a sharing of similar files and post service download here link. Then we can have a thorough review.

Maybe you are looking for

  • Change the default sounds and ringing

    How to do this? I'm tired of listening to other ringtones of watches and think it's mine.

  • Equium M50 164: cannot install the Ethernet controller driver

    My laptop was recently formatted and everything is back to normal except the DSL; Device Manager displays a yellow exclamation mark on Ethernet controller. I tried to find a suitable and closest driver, I had was Equium M series PSM59 (5.621.628.2004

  • show sound dv7

    A month ago, my speakers stopped working. at first I thought it was material, but I noticed that the speaker in the taskbar icon was an 'X' on it, I was curious. He said: "no speakers or headphones are plugged."  It's particularly confusing because I

  • measure your does not give 0 for output

    Hello all, I use the tone for measurment.vi measure the frequency of a square wave from 0 to 15 Hz. when I run my program, my square wave frequency is zero, but the output the your measurment is 1,268, while running the program I get the value to zer

  • loading 32-bit programs on a 64-bit system

    I just bought a Compaq 64 bit Windows 7. I want to load an older copy of civilization (civ2) top and it seems to load, but it won't work. The message I get is that it does not find c:\windows\system32\original. I'm assuming that as my computer is 64-