Subscribed Dump 4.0.0.23 error in constructactionstring
Hi all -
I'm under 4.2 (1). I went to run the Dump of the Subscriber information, version 4.0.0.23, on a Unity server and I get this error for each Subscriber, even if I don't select another Contact number as one of the fields - error in the constructactionstring function. Name of illegal conversation: transfer AltContactNumber. DbWalker works with 0 error on the server. Anything else you would recommend that I check? This is the first time I ran the SubInfoDump.exe since the upgrade.
Thanks in advance! Ginger
OK, build 26 should do the trick:
http://www.ciscounitytools.com/APP_subr_info_dump_3x.htm
all the outputs on all versions of 4.0 (5) and more later put to the test and it seems to be happy now...
Tags: Cisco Support
Similar Questions
-
I've been to dump memory and blue screen on a Windows Server 2000 Terminal Server running.
I had to change the server for a complete memory dump to just check bug 64 MB because memory dumps were fill the C drive and it is the same mistake each time it fails.
It is a production server and is vital to my business.
I don't want to just install the 5 or 6 different patches from Microsoft that references the same exact error code, error message stop and symptoms for Server 2000.
I just replace the memory new inside with two sticks and I even changed the boxes it was with one that has no hardware problem as I have a few of them.
So he this 2000 Server had the motherboard, processor, memory, network, Audio card, changed video cards and I always get this accident a few times a day.
I can't find anything definitive on this so if anyone has had the same problems and found a solution, then I'd be very happy to help.
I am doing a complete network upgrade in the next month or two.
My work is located in the middle of the busy season and I cannot take the server down and impossible to install anything that could cause a hard accident and not to start again.
I'm in the middle of an upgrade of the network and we'll go virtual with this server with as many others as I can.
I need to this Terminal Server to stop crashing and to find a solution for it, while the summer crowd is full swing at my work and it will improve after this summer.
Any help would be awesome.
Thank you and sorry for the long post.
Here's the info I get from BlueScreenViewer when you look at the minidump
Bug UNEXPECTED_KERNEL_MODE_TRAP control chain
Bug check code: 0x0000007f
Parameter 1: 0x00000008
Caused by the driver ntoskrnl.exe
Plant address: ntoskrnl.exe + 66e09
32 bit processor
This forum is for the support of end users, the users of the computer at home, have problems with Windows. People server all hang out them in the TechNet forums then you might want to try this post it there instead.
-
Problem with the "subscribe" to the example... error code 400 "POSTAL
All the:
Repost of the Group on the development of Blackberry PUSH - no real answer
I took the code that comes with the SDK of PUSH and compiled, signed etc and put it on the BB. Yes, I signed up for the eval.
When I try to record on the handheld, next POST returns '400' - invalid arguments:
http://pushapi.Eval.BlackBerry.com/subscribe?username=
& password = & appid = & address = 255069fe & osversion = 4.2.0 & model = 9000 & field1 = 742; deviceside = false; ConnectionType = mds-xxxxxx Clearly one of the parameters seems to be wrong, but I can't understand those who.
Does anyone have hints for me?
Thank you
OK, fixed.
On the client I just put comment out the code that called her 'subscribe '. Recording works now and the Bell itself.
-
update the primary database with the old system dump export received the YVERT error
Here is the error message:
ORA-31684: SYNONYM object type: 'SYSTEM '. "" SYSFILES "already exists
ORA-31684: SYNONYM object type: 'SYSTEM '. "" TAB "already exists
ORA-31684: SYNONYM object type: 'SYSTEM '. "' TABQUOTAS ' already exists
ORA-31684: SYNONYM object type: 'SYSTEM '. "" PRODUCT_USER_PROFILE ' already exists
DATABASE_EXPORT/SCHEMA/TYPE/TYPE_SPEC processing object type
ORA-31684: type of the object TYPE: "SYSTEM". "" REPCAT$ _OBJECT_NULL_VECTOR ' already exists
Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM
Cannot set a bigger than the current SNA SNA. If a configuration Capture stream was then imported the application that processes the captured messages must be deleted and re-created. See My Oracle Support 1380295.1.
Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
ORA-39083: Type THAT PROCOBJ cannot be created with the object error:
ORA-29357: SYSTEM_PLAN object already exists
Because sql is:
BEGIN
dbms_resource_manager.create_plan ('SYSTEM_PLAN', 'Plan focus on system sessions', 'FOCUS', 'ACTIVE_SESS_POOL_ABSOLUTE', 'PARALLEL_DEGREE_LIMIT_ABSOLUTE', 'FIFO_TIMEOUT'); COMMIT; END;
NEW RAC system is redhat linux 5, db version 1120301.
old system is a database on aix, version is 11.2.01
by export file:
Full = directory = data_pump_dir dumpfile=exp_full_%U.dmp logfile = exp_full.log filesize = 11000 m FLASHBACK_TIME = systimestamp
import file is:
Full directory = y = data_pump_dir dumpfile=exp_full_%U.dmp logfile = parallel imp_full.log = 8
~This seems to be what I tried to say a few hours back.
I probably give up at this point and take a step back and rethink this.
Anything worth doing worth do right.
Really. Stop, think and plan.
Stop waiting for someone to tell you what you want to hear.
Best regards
mseberg
-
How can I subscribe to nesgroups - get an error unable to connect to the server
Attempted to subscribe to newsgroups, but get an error message - unable to connect to the server. What I am doing wrong?
msnews and msn newsservers and groups are gone. There are a few free newsservers, such that news://nntp.aioe.org , but a pottery forum is empty. There are also some newsservers that you can pay for. You could try emailing somone who already contacted you in the other forums to see if they have suggestions and what they are doing in this regard.
Steve
-
Original title: 0x000000f4 beginning physical memory dump
STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump
This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...Hello
You did changes to the computer before this problem?
Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
Pitchers of game MMORPG dump for any reason without explanation...
Windows XP for sale, several launchers online game will not progress past the pitcher without dumping and there is no error message given to help troubleshooting. Only, to do this, pitchers of online game and I have no problem with other things such as my internet browser or regular games. The game has worked in the past.
synntax33,
Nothing changed on your system, since the last games were working (hardware or software)? If so, you can remove the element and the test or perform a System Restore to a date where the games were working.
I would also say that you try to clean boot of your system to see if another application is in conflict with the games. If these things don't help then post what games are, you have a problem with. And you can check with the manufacturer's support of game for the updates.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error: Initiator has tried to get around the security phase, but we cannot
Hello
I started working on the new company and tonight we lost storage for about an hour and mistakes came:
SAN1 storage array error event
subsystem: MgmtExec
event: 7.4.3
time: Sun Apr 21 00:58:18 2013
"connection iSCSI to target '10.10.10.21:3260, iqn.2001-05.com.equallogic:4-52aed6-cb0bdf198-eee0000000c50212-vss-control' initiator ' 10.10.10.22:53396, iqn.1991 - 05.com.microsoft:sp2 - vm - sql2.company.local' failed for the following reason:
Initiator has tried to circumvent the security phase, but we cannot.On windows this evening first errors began:
EventID: 4025
Source: EqualLogic
connection error iSCSI 0xefff0009 connecting to the vss-control for the 10.10.10.41 group volumeEvent ID: 10
Source: iScsiPrt
Logon request failed. The login response packet is given in the dump data.These errors I see repetition of the past in the Windows event log.
It is hyper-v virtual SQL cluster with iSCI Dell storage connection.
How to solve this problem?
Thank you
Hello
Vss control volume, which is used my MS Volume Shadow service to access the clichés of material, there's a GUY configured username. However, the initiator does not send a name of user and password c...
If you use the EQL TYPING kit, then you should allow these servers access to this volume. Or change the ACL on this volume to allow that the servers that need to access.
Alternatively, you can remove it from the Favorites tab, so that he tries to log in the next time the server starts.
Finally, you can enable the discovery of prevnet filter this of is re - produce.
Here is a KB from the Equallogic Web site.
Solution title error: "initiator wanted to ignore the security phase but we can not." or "initiator has tried to circumvent the security phase but we cannot."
Symptom of solution of details: event on the web interface of PS log table shows a connection error for a volume that says: "initiator wanted to ignore the security phase but we cannot." This error can be repeated continuously every few seconds.
Question: by default, volumes that have enabled CHAP authentication will be shown during the process of iSCSI discovery even if the initiator does not have the authentication information c. Discovery is controlled by its address IP ACL, so if a machine matches the IP address of the ACL scope, we will see the volume. Note that multiple initiators such as those that are unix based as the initiator of the Cisco software that uses VMWare will continue to attempt to connect to the target (often, every two seconds), even if each connection attempt fails. This can fill the paper and the performance of the server can have an impact.
Solution: Limit the discovery of volumes CHAP authenticated by IP address and ensure that only servers with appropriate credentials CHAP can observe the volume at all.
The most common volume to see this error on is the special volume named "vss control." This volume is for communication with Microsoft's VSS service, using EqualLogic host integration tools. If it is configured for unlimited access, or is configured for the CHAP only, then each initiator on the SAN will be able to find out and may attempt to use it. Set ACL "vss-admin" to enter an IP address for each machine that needs to access, to ensure that no one else does.
For firmware version 2.2.3 and, before going to the volume named 'vss-control', select the Access tab and change the entries here in a proper way.
For the later version 2.3.2 (including all versions 3.X) firmware, go to the Configuration Group box and select the VSS/VDS. It's the ACL for the vss-control volume, which you should change as appropriate.
It may be necessary to restart servers that try to access this volume after changing the ACLs, however. Some initiators do not release a target once they have discovered, even though the table indicates that the target does not exist. An example of this are ESX servers, using the software initiator.
A second scenario may be a volume that is configured to be seen from in a VMWare server VM Windows using CHAP credentials and also install on the table to use a single connection Cap. Even if the credentials CHAP is setup correctly on each side if the ESX Server uses the software initiator that ESX will attempt to connect to the volume permanently every minutes or seconds depending on factors both. With configuration to several volumes in this way, it can be a drain on performance on ESX.
To troubleshoot this scenario make sure to activate the iSCSI discovery of the IUG table of PS filter. This is done from the Group/iSCSI Configuration tab. check the box off and save the configuration using the Green disk icon in the upper right of the graphical interface. This makes the servers with the initiators that are correctly setup to see a volume with CHAP will see and try to connect to these volumes. Note: once an ESX Server has seen a volume to continue to try to connect with the software initiator until the ESX Server is restarted after this option is turned on.
Note that, since the version of the firmware 3.0.5 and later, you can require authentication for CHAP-enabled volumes during discovery, by issuing the command in the CLI:
GroupName > enable discovery-use-chap grpparams
Kind regards
-
Error with a blue screen in windows 8 64-bit because of the file "cnnctfy3.sys".
I m sending u link of this error minidump files since there were 5 error files I downloaded on OneDrive
Link: https://onedrive.live.com/redir?resid=620CE0EA1DD716E9%21356
CrashFileUpdate folder_name
Please help me... my laptop running very low, because of this. and the start-up stop n is tedious because of this...
Thanks and greetings
Ravi Mehta
HI Ravi,
This problem can occur because the cnnctfy3.sys file on the computer.
All files dump reports show:
9F error checking, {4, 12 c, fffffa8004a5ab00, fffff880009c2810}
WARNING: Unable to verify timestamp for cnnctfy3.sys
ERROR: Module load completed but symbols can be loaded for cnnctfy3.sys
Failed to retrieve the thread context, Win32 error 0n30
WARNING: Unable to verify timestamp for win32k.sys
ERROR: Module load completed but symbols can be loaded for win32k.sys
Probably caused by: usbccgp.sys
cnnctfy3.sys is the driver of Connectify light package Filter Kit. If you have installed the package, I suggest to uninstall and check if this solves the problem.
Please keep us informed.
-
meet the ORA-39000: specification of the bad dump file when using datapump
Hello
I am using datapump to export a schema (Meta_data only). However, I would like to be named after the date and time of export taken the dump file.
When I use the following command - the job runs perfectly.
expdp system@*** dumpfile = expdp-'date' + %m %%d Y_ hour %M %s ".dmp logfile EXP_DP = directory = expdp-'date' + %m %%d Y_ hour %M %s".log SCHEMAS = MARTMGR CONTENT = METADATA_ONLY
However, I want to run the export using a parfile. But if use below parfile, I encounter the following errors.
UserID=System@***
DIRECTORY = EXP_DP
SCHEMAS = TEST
dumpfile = expdp-'date' + %m %%d Y_ hour %M %s "
LOGFILE = MARTMGR.log
CONTENT = METADATA_ONLY
expdp parfile = martmgr.par
Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
With the partitioning option
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-39157: Error adding the file extension "expdp-'date' + %m %%d Y_ hour %M %s".
ORA-07225: sldext: translation error, impossible to expand file name.
Additional information: 7217
How do I add the date and time of the dumpfile when you use a parfile.
Thank you
RohitYou can do this in a script
setenv cur_date 'date' + %m %y %d "
then, when you give parameters
dumpfile = dumpfile_$ cur_date.dmp
-
Cannot write trace files destined for the bottom dump in oracle 10 g
Hi all
Version of the OS: RHEL 5.7
DB version: 10.2.0.4
cluster: database node 2 RAC
Today I faced a strange behavior for one of our production database. Its a database of 2 rac nodes. There is no automatic generation of trace files in the destination of bottom dump on the first node. I am able to see the second trace files in its context dump dest. But the strange behavior occurs on the first node. I see that alert logfile in the bottom dump dest. Despite an error that displays the generated trace file but no file is located in the bdump. Here is the error, but physically he no trace file is generated:
Errors in file/oracle/db/admin / < sid > /bdump/ < sid >j0011558.trc:
can someone have any idea for this strange behavior. There is no script maintenance for the removal of trace files.
ORA-12012: error on auto run 94377 work
ORA-12008: error path refresh materialized view
Kind regards
Imran Khanits his work after you re-create your synonym then Yes you should not recreate MV again.
-
Instance not valid error then take out the screen
Hi friends
I am doing a simple demo of screen Sharing.but it will give me the instance not valid error when I sign on to any editor screen, I mean when you go to subscribe to any screen through an error named
Invalid instance.
at com.adobe.rtc.session.managers::SessionManagerBase/receiveError() [C:\work\main\connect\co como\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
at com.adobe.rtc.session.managers::SessionManagerFMS/receiveError() [C:\work\main\connect\coc omo\src\com\adobe\rtc\session\managers\SessionManagerFMS.as:308]
at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/receiveError() [C:\work\ main\connect\cocomo\src\com\adobe\rtc\session\managers\SessionManagerAdobeHostedServices.a s:271]
at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/onMeetingError() [C:\wor k\main\connect\cocomo\src\com\adobe\rtc\session\managers\SessionManagerAdobeHostedServices .as:111]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.session.sessionClasses::MeetingInfoService/onStatus() [C:\work\main\connect\ cocomo\src\com\adobe\rtc\session\sessionClasses\MeetingInfoService.as:457]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()body guides me why does this happen and how to solve the it.shoould I put through different in key can sign the application?
Thanks and greetings
Vineet Osho
Hi Aditya,
You should not need to use a shared secret for 2 apps running - it's
specifically for external authentication. All you need is 2 applications,
both have the same roomURL. An application can have the publishing server, the
others may have of the Subscriber. I suggest that you spend some time to read the
LCCS Developer Guide, or listen to the video tutorials we provide.
hope that helps
Nigel
-
error ORA-04030 in environment dataguard
Oracle Database 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production
Name of the system: Linux
News Release: 2.6.18 - 53.el5
Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
Machine: x86_64
DATAGUARD ACTIVE WITH THE OBSERVER. error ORA-04030
the failover of the database on STANBY, today morning the database instance ensures also finished with the same error message.Alert log information: Thu Sep 02 02:00:00 2010 Clearing Resource Manager plan via parameter Thu Sep 02 10:16:31 2010 Errors in file /u01/app/oracle/diag/rdbms/agbcdb/agbc/trace/agbc_asmb_4312.trc (incident=88030): ORA-04030: out of process memory when trying to allocate 592 bytes (callheap,kfmditer) Incident details in: /u01/app/oracle/diag/rdbms/agbcdb/agbc/incident/incdir_88030/agbc_asmb_4312_i88030.trc Thu Sep 02 10:16:36 2010 Trace dumping is performing id=[cdmp_20100902101636] Errors in file /u01/app/oracle/diag/rdbms/agbcdb/agbc/trace/agbc_asmb_4312.trc: ORA-04030: out of process memory when trying to allocate 592 bytes (callheap,kfmditer) ASMB (ospid: 4312): terminating the instance due to error 4030 Thu Sep 02 10:16:36 2010 ORA-1092 : opidrv aborting process unknown ospid (13456_46912513432672) Instance terminated by ASMB, pid = 4312 Thu Sep 02 10:16:37 2010 Instance termination got error 27120 from SGA destruction. Error cleared. Process exiting. 49270,3 Bot trace file information: Trace file /u01/app/oracle/diag/rdbms/agbcdb/agbc/trace/agbc_asmb_4312.trc Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options ORACLE_HOME = /u01/app/oracle/product/11.1.0/db System name: Linux Release: 2.6.18-53.el5 Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007 Machine: x86_64 Instance name: agbc Redo thread mounted by this instance: 1 Oracle process number: 15 Unix process pid: 4312 *** 2010-09-02 10:16:31.510 *** SESSION ID:(321.1) 2010-09-02 10:16:31.510 *** CLIENT ID:() 2010-09-02 10:16:31.510 *** SERVICE NAME:(SYS$BACKGROUND) 2010-09-02 10:16:31.510 *** MODULE NAME:() 2010-09-02 10:16:31.510 *** ACTION NAME:() 2010-09-02 10:16:31.510 Incident 88030 created, dump file: /u01/app/oracle/diag/rdbms/agbcdb/agbc/incident/incdir_88030/agbc_asmb_4312_i88030.trc "/u01/app/oracle/diag/rdbms/agbcdb/agbc/trace/agbc_asmb_4312.trc" 31L, 1346C 13,1 Top ORA-04030: out of process memory when trying to allocate 592 bytes (callheap,kfmditer) error 4030 detected in background process ORA-04030: out of process memory when trying to allocate 592 bytes (callheap,kfmditer) *** 2010-09-02 10:16:36.501 ASMB (ospid: 4312): terminating the instance due to error 4030 skgm error 27120: errno = 12, info = 5, 163842, 0, 0, 46912513437872, 1, 46912513437872
We followed the metalink documents to solve problems.
our Director increased SR, today in the morning watch is also down because of the same error ora-04030. We started the night before now and check the stats on the PGA Tour.SQL> ! ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited max nice (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 139264 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 65536 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 max rt priority (-r) 0 stack size (kbytes, -s) 32768 cpu time (seconds, -t) unlimited max user processes (-u) 2047 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited SQL> show parameter pga NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ pga_aggregate_target big integer 0 SQL> SQL> select * from v$pgastat; NAME VALUE UNIT --------------------------------------------- ---------- ------------ aggregate PGA target parameter 2684354560 bytes aggregate PGA auto target 167772160 bytes global memory bound 268431360 bytes total PGA inuse 4780392448 bytes total PGA allocated 5534604288 bytes maximum PGA allocated 5551688704 bytes total freeable PGA memory 269811712 bytes process count 180 max processes count 181 PGA memory freed back to OS 681246720 bytes total PGA used for auto workareas 0 bytes NAME VALUE UNIT --------------------------------------------- ---------- ------------ maximum PGA used for auto workareas 2717696 bytes total PGA used for manual workareas 0 bytes maximum PGA used for manual workareas 0 bytes over allocation count 2757 bytes processed 4510057472 bytes extra bytes read/written 0 bytes cache hit percentage 100 percent recompute count (total) 2757 19 rows selected. SQL> set linesize 120 col program format a10 col used format 999999.99 col alloc format 999999,99 col max format 9999999.9 select spid,program,trunc(pga_used_mem/1024/1024) USED, trunc(pga_alloc_mem/1024/1024) ALLOC, trunc(pga_max_mem/1024/1024) MAX FROM V$PROCESS ORDER BY PGA_ALLOC_MEM DESC; SQL> COL PROGRAM FORMAT A40 SQL> RUN 1 select spid,program,trunc(pga_used_mem/1024/1024) USED, 2 trunc(pga_alloc_mem/1024/1024) ALLOC, 3 trunc(pga_max_mem/1024/1024) MAX 4 FROM V$PROCESS 5* ORDER BY PGA_ALLOC_MEM DESC SPID PROGRAM USED ALLOC MAX ------------------------ ---------------------------------------- ---------- ---------- ---------- *4348 [email protected] (ASMB) 4068.00 40,70 4070.0* 4448 [email protected] (RSM0) 3.00 2,26 446.0 4336 [email protected] (DBW0) 5.00 33 41.0 4429 [email protected] (ARCt) 11.00 28 32.0 SQL> SQL> SELECT SUM(VALUE)/1024/1024 MB 2 FROM V$SESSTAT S,V$STATNAME N 3 WHERE N.STATISTIC#=S.STATISTIC# 4 AND NAME='session pga memory'; MB ---------- 4578.77262 SQL> SQL> run 1 select sid,name,value 2 from v$statname n,v$sesstat s 3 WHERE N.STATISTIC#=S.STATISTIC# 4 and name like'session%memory%' 5* order by 3 asc SID NAME VALUE ---------- ------------------------------ ---------- 119 session pga memory max 22846056 280 session pga memory max 235067848 321 session pga memory max 4267874920 SID NAME VALUE ---------- ------------------------------ ---------- 321 session pga memory 4267874920 716 rows selected. SQL> show parameter sort_area_size NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ sort_area_size integer 65536 SQL> show parameter workarea_size_policy NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ workarea_size_policy string AUTO
now the memory used by pga is very less,SQL> select spid,program,trunc(pga_used_mem/1024/1024) USED, 2 trunc(pga_alloc_mem/1024/1024) ALLOC, 3 trunc(pga_max_mem/1024/1024) MAX 4 FROM V$PROCESS 5 ORDER BY PGA_ALLOC_MEM DESC 6 / SPID PROGRAM Used (in MB) ALLOC MAX ------------------------ --------------------------------------------- ------------ ---------- ----------- 4372 [email protected] (LGWR) 11.00 24.00 24.00 4473 [email protected] (ARCd) 11.00 24.00 24.00 4503 [email protected] (ARCs) 11.00 24.00 24.00 SQL> SELECT SUM(VALUE)/1024/1024 MB 2 FROM V$SESSTAT S,V$STATNAME N 3 WHERE N.STATISTIC#=S.STATISTIC# 4 AND NAME='session pga memory'; MB ---------- 453.999092 SQL> run 1 select sid,name,value 2 from v$statname n,v$sesstat s 3 WHERE N.STATISTIC#=S.STATISTIC# 4 and name like'session%memory%' 5* order by 3 asc 309 session pga memory 12753512 326 session pga memory 12810392 326 session pga memory max 12827448 336 rows selected. SQL>
My question: 1 why FILIPE takes too much memory?
2. After switching to the standby database also the memory used by the process of FILIPE is not released very high almost 99.99%?
Thank you and best regards,
Olivier Claude.Hello
you're welcome :)Salman
-
ORA-07445: exception encountered: core dump of standby database
Hello
This is Oracle 10.1.0 in a logical database Stanby on Solaris9
The application stops and these errors and then it started by itself:
...
LOGSTDBY status: ORA-16226: DDL ignored due to lack of support
< date >
Errors in the <>trace file
[ORA-07445: exception encountered: core dump [krvsmso () + 812] [SIGSEGV] [address not mapped to object] [0 x 000000004] []]
< date >
Track of dumping performs id = [cdmp_20100226210050]
< date >
Errors in the <>trace file
ORA-12805: parallel query server died suddenly
LOGSTDBY apply process pid = 67 OS id = 10471 order P006
...
The trace file is this:
SERVICE NAME:(SYS$BACKGROUND)
SESSION ID:
Exception signal: 11 (SIGSEGV), code: 1 (address not mapped to the object), addr: 0 x 4, PC: [0x101fb226c, krvsmso () + 812]
***
ksedmp: internal or fatal error
[ORA-07445: exception encountered: core dump [krvsmso () + 812] [SIGSEGV] [address not mapped to object] [0 x 000000004] []]
-Call trace stack memory-
call call entered the argument values in hex
location point type (? means dubious value)
-------------------- -------- -------------------- ----------------------------
ksedmp () + CALL ksedst() 000000042 1008? 02118 104?
02128 104? 000000000?
1052DCE18? 000000008?
ssexhd () + 992 ksedmp() 000000002 CALL? 000105000?
10512 000? 00010512D?
000105000? 000000001?
If anyone has experienced the same problem or know why and how to solve?
Thank you!
Published by: Loulon on 04-mar-2010 08:20Bug 4369756 Log apply may dump [krvsmso]
-
Win7 appcrash App: explorer.exe fault: ntdll.dll
Hi, thanks for my question!
After leaving my computer in hibernation during the night a few days before, I found a few updates had been installed and the system tried to reboot. Permit this and after restarting, I tried to resume editing of audio files and browsing the forums. I started seeing pop-ups telling me that Windows Explorer has stopped working. Choose "Search the Web for a solution and restart" failed to retrieve the results. The problem ~ every 2.2 minutes after that the Explorer was launched, and close the Explorer does not stop the cycle.
I did the steps proposed in other cases of appcrash quite similar, including the clean boot: no joy. I'm at the end of my competence, but also my patience. While it is a computer pretty new (for me) and pretty cool update to Win 7Pro, I'd rather not wipe it and start over. I prefer a lot to know what went wrong and take corrective action.
Here is the text of the error message:
Signature of the problem:
Problem event name: APPCRASH
Application name: explorer.exe
Application version: 6.1.7601.17567
Application timestamp: 4d672ee4
Fault Module name: ntdll.dll
Fault Module Version: 6.1.7601.18247
Timestamp of Module error: 521eaf24
Exception code: c0000005
Exception offset: 000000000002b20d
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information 1: 0c 71
More information 2: 0c71b52ab8a6bb121dba95fbf40956c8
3 more information: 81a 7
Additional information 4: 81a74861ef3283f3b4328d2fd3cfa78cDRM for all suggestions and explanations!
-Sean-
The error points to the duser.dll which is a component of Windows:
Probably caused by: duser.dll (duser! CoreSC::xwSendNL + 1bc)
There is also the participation of the dui70.dll that may indicate a problem with the graphic driver such as the hccutils.dll components.
Can update you the graphics driver to the latest version.
Post back if the error persists, or if it is impossible to update the graphics driver with in addition to the files of dump to see if the error is consistent.
Maybe you are looking for
-
Questions of hibernation HP m9500f
This system is not that of 5 months and this morning I woke to the fan rotates at a high speed rate and no lights on the front of the computer or the monitor (that works). I left it last night by turning off the screen and hitting the botton of hibe
-
How to get the installed Application timestamp programmatically
How to get the installed Application timestamp programmatically Can you please help me.
-
Delete PersistentObject of the store when the application is uninstalled
Hello I expect that on request, uninstall the PersistentObjects used by the application would be removed, but this does not happen. How can I achieve it Thanks yo
-
I bought and downloaded online Windows 8 and received the product key. How can I now purchase the installation CD?
-
OPA has multi-currency support?
OPA has multi-currency support?