"Success" option not available to change a blank slide with 5.5?

You create a module in adobe captivate 5.5 or earlier to version with a blank slide at the end.

You use the option "on success" of this blank slide to branch to another module.

You do not use the buttons with the skin or other.

You save the module in 5.5 and return later for her.

Why the option "to success" is no longer available on the blank slide to change the name of the URL?

You can see the option "to success' listed by the URL listed for this slide in the"Advanced"but Interaction where you can go to edit this URL?

If you go to 'Properties' to this slide the option 'Success' is not listed.

Hello

It is very strange, I've never seen action at the level of the slide that you have in the view of Advanced Interaction. Even if you have an action on the input (or output) is not specified there. Reason is that this Panel displays only all kinds of inventoried items (click boxes, buttons, TEB, interactive widgets and question slides.) Events on entering and leaving the slides are not identified, cannot be displayed here. This Board is read only, no way to change something not like the URL, and I also doubt that it will have effect. I think something is corrupted here.

Maybe say "when" you want to display the URL? If the right input on the second slide (in your example), add this action to the event on enter to this slide. There is already a similar action triggered by the button on the first slide (same as the 'Phantom' action). If you know what you want to achieve, maybe we can help.

Lilybiri

Tags: Adobe Captivate

Similar Questions

  • Export the jPeg option not available InDesign CC 2014.

    Export the jPeg option not available InDesign CC 2014. Extension manager says he's here and installed but no show! any ideas?

    Yep, re-installed in design CC 2014, after it has worked well.

  • The printer options not available when printing from Lightroom

    Hi all

    I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

    In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

    If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

    "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

    The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

    Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

    I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

    I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

    I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

    Thank you

    Ian

    Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.

  • Error code 797: connection is not available because there is a problem with your network card or modem

    I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

    Hi Muffakham,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    To provide the proper resolution, that I would need more information on your side.
    Did you the latest changes on the computer before this problem?

    This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

    Method 1:
    I suggest you try the procedure described in the article and see if it helps.

    How can I troubleshoot network card?
    Method 2:
    If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Check out the link for more information.

    Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Cannot change SSID on E3000 - option not available

    Hello

    Bought the E3000 and the ability to change the SSID is not available.

    Looking at the wireless > BASIC WIRELESS SETTINGS done help button refers to being able to change the SSID here, but this option is not available.

    Any thoughts?

    Thanks in advance.

    Figured it out.

    On this page, you must change the WiFi Protected Setup manual.  Allows you to change your SSID.

  • Vista HomePremium.SP2. Chnge workgroup option not available but may change the name of the computer. Can not enable file sharing. How Iactivate these options? Thanks in advance, Geoff

    Vista Home Premium.SP2. Working Group change option is not available on the system page, but I can only change the name of the computer. Can not turn on either file sharing. How to activate these options? Thanks in advance, Geoff

    Geoff

    1. If it is the domain controller, you cannot change the name of the computer by selecting network ID and this is normal.
    2. If it is a member of the computer in domain or workgroup, you don't have permission to change the name of the computer.
    .

    See this link for more information

    http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/a552c6f8-AB02-44e5-9FF9-471ebc7ac1c6/

  • HP Deskjet 5100 taped in grayscale - Management Options not available in the settings of the printer color

    Hello!

    My printer is a HP Deskjet 5100 on Mac 10.8.5. He's stuck on shades of gray, when printing. Any program I try to print in I do not get the color management option, even when checking in the advanced options.

    On photoshop, he's also stuck in grayscale.

    I printed a test page with success in color. But for some reason, no program will be printed in all except grayscale.

    I tried to update the drivers, but the audit of Web/driver HP site, everything is up-to-date.

    Other information:

    In the printer options, I can't even check my rate of cartridge. I have the following message: Information not available

    In ColorSync Utility, under devices, it says the printer Mode is: "grey". When I try to assign a different color profile, do not.

    I did a hard reset of the printer.

    I removed completely and resynced the printer with the computer again in prefs/Print & analysis system

    Any information would be amazing. I checked all the forums that I could find online,

    Hello

    Your printer is not compatible with Mountain Lion, that's why using Mac one driver generic PCL which is black & white drivers only:

    http://support.HP.com/us-en/document/c01856359

    Try a 3rd party like HPIJS driver, it seems your printer support and more likely to provide you with a better results than a generic driver.

    Don't forget to install one of the 3 required uploads before adding to the queue printing:

    http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/MacOSX/HPIJS

    Shlomi

  • HP Officejet 6000 wireless E609n double-sided printing Option not available

    I have the printer above with a duplexer. There is no available duplex printing option in the print dialog box.  If I open the application HP Officejet 6000 E609n, under settings > Options tab > printing HP accessory two-sided (duplexer) is not checked. When I check it, then the duplex printing option is available in the print dialog box. However, after a print job with two back, the option is no longer available for further work. Reopening of the HP Officejet 600 E609n application reveals that the two box HP-sided accessor (duplexer) printing automatically returns to the off State.

    Hello

    Try to restart your Mac and find any difference, also run Software Update from the Apple menu and make sure there is no HP or Apple updates available, then check any change.

    If it persists, try resetting the aboid printing system any curropted configuration:

    * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

    Click on the Apple menu and then click on System Preferences.
    Some Printers & Scanners.
    Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
    Click OK to confirm the reset.
    Type your user name and password.
    Click OK. The printing system resets.

  • Manage the option not available & administrative tools not available

    Using windows 7 Home Basic in my laptop. Now am not able to get to 'manage' option to right-click on 'My Computer' & when I try to access administrative tools in the control panel his watch an error as the location is not available. What should I do? Help, please.

    Feisal

    Hello

    1. What is the exact error message do you get?

    2. have there been recent changes to the computer before the show?

    Method 1: I suggest you of scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

    http://support.Microsoft.com/kb/929833

    Method 2: Also I suggest to open the original location administrative tools and check if the same problem persists.

    "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors."

    Method 3: you can also your computer in a clean boot state and check to see if the same problem happens.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • Format > align options not available in Dreamweaver 2015

    I upgraded to 2015 CC, I noticed that the option to align a text is no longer available in this version, I tried the so Ctrl + shift + alt + R (or L, C), but they work do not, the format of alignment to change shortcuts is not available to affect as well. This could be a big problem for beginners like me, in previous versions I just selected some paragraphs and right-click and then automatically inserted the DIV and aligned with the text, now I have to manually insert a DIV for a specific line and give the format of each line. No idea where is the alignment option? Or how to get around this? Thank you!

    MarcosBorges wrote:

    No, the inspector I get has no alignment buttons, not not even the properties of police like yours, that's what I see:

    You must click on CSS . properties Your screenshot shows that you are in HTML properties.

    Nancy O.

  • Some options not available on slide intro

    Hello

    VERY new to Captivate so please be gentle with me. Ok.. I started a new project. on the first slide (intro) I want users to enter the details of their name and login (student number). I do this to secure the site and so that eventually - when I'm working how - details will be entered to the LMS (moodle). However, the option of text entry box and other things like buttons are unavailable for inclusion - they are greyed out. Is there a setting I need to change to the slide or anything else I should do to make available?

    Thank you

    C

    Hello and welcome to the forum,

    It helps if you say that the Captivate version you are using.

    And I think that at the moment you are working on a master slide, not on a regular blade. Text entry boxes are not possible on master slides. Check the Master slide panel: is one slide masters it surrounded by a thick line? If you work on a normal blade, it would be marked the same way in the film (vertical, anchored on the left side next to the toolbar in the classic workspace).

    Lilybiri

  • burn option not available

    Hello! I use the latest version of iTunes and when I click file to select burn playlist cd, it is not available. I can't understand why. can someone help me? I created a playlist with all the songs I want on my cd and have tried both a right click and it does not give me the option always.

    Kat,

    In the most recent iTunes (12.1.4), burn the dialog box works the same as it always did.  You have a playlist of songs open?  Have you checked that they are flammable tracks (not Apple music)?

  • Satellite A660 - Win 8.1 power settings option not available

    Hello

    I upgraded my Toshiba (A660) to 8.1 64 x. (clean install)

    All if works well except idle protected function, which seem to have disappeared of power options.
    In my view, that a driver is required. (I have installed a single Toshiba driver)

    They don't seem to have VAP more.

    Can someone tell me what is the driver I need to install for this problem?

    Thank you.

    > All works well except idle protected function, which seem to have disappeared of power options.
    What exactly is the function of inactive variation? Display backlight control?

    Toshiba not stand in my knowledge of Windows on the Satellite A660 8.1 and therefore you would not find drivers Windows 8.1 for this series.

    If you want to install the utilities and tools Toshiba Windows 8.1, you will need to seek such software in your own hand. But I'm not quite sure if software published for other portable Toshiba would be compatible with the A660 m model.

    However, the fact is that there is no such thing as the package of added value to win 8.1.
    This was the case with Vista or Win 7, but it is not available for Windows 8.1.
    The VAP has been replaced by the system of Toshiba driver.

  • Siri Option not available

    Just bought an iPad running IOS 9.2.1 3.

    In the General settings, I see no Option Siri nor I see the Option dictated in the keyboard settings.

    Restrictions is set to Off.

    I don't know this model iPad (MD-368C/A) IS compatible with Siri.

    Should Siri be downloaded and installed separately?

    It is not available in all countries. Here is the list where it is available.

    http://www.Apple.com/iOS/feature-availability/#Siri

  • document linking option not available

    Hi HP
    I'm new here with a new problem. I made an excel file on my HP Slate 6 voice with kingsoft office software tab. I wanted to send this file, but when I clicked on the attachment button I could not find such an option to fix any file excel or doc with enamel. Only the images of the camera, images, downloads and docs google drive whatsapp were available as accessory, but not what I've created tab only. It's so boring, if I have to attach any file doc to e-mail. Please update me on the above question. Thank you.

    Concerning
    Warda

    Open the file with Kingsoft, then find the option "Share".  Choose Gmail or any other email client.  The file will be attached to a new email.

    I'm on the latest version of which was Kingsoft Office (it is now WPS Office Mobile) and on my phone, there's an icon 'tools '.  In this document, you will find the option "Share".

    WyreNut

Maybe you are looking for