successful installation of the United Nations to the pilot for All_in_one Deskjet 2050 j510 series

Similar Questions

• installation of the pilot for ho all-in-one 4500 g510n wireless

  I received this printer from my son with no software. I logged on to HP and tried to install this printer driver. When I am at the screen that says it's the extraction, I got a pop up that says "the system cannot find file specified." Don't know what to do next. can you help me?

  Hello
  Follow the steps below and check if this may resolve the issue:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• What is the other alternative cartridges for hp deskjet 2050 j510 instead of # 122

  I bought this printer in Saudi Arabia, but now I am here in the philippines, so what's the cartridge hp applicable herein the philippines I use in this printer. ? Thank you

  any help pls send me an email @ {deleted personal information}

  Hello. Regionalization reset must be made free of charge. I should be able to do it by phone, but if you must go to a service center, there should be no fees either.

• Missing or corrupt files after the installation of the SP3 for XP PRO

  Norton Anti virus history shows no deletions of these files.

  * original title - I have missing files or damaged after the installation of the SP3 for XP PRO. These are files of driver for my DVD player and Camera.Specifically [dcptp.sys] can not be consulted online *.

  And have you tried to reinstall the DVD software & camera?

  Why SP3 was installed years ago?

  Currently, the computer is fully patched to Windows Update?

  ==========================

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Files in a folder disappeared after the installation of the software for Word color card.

  I have files in a folder that has disappeared from my office, I think it happened after the installation, I think it happened after the installation of the software for wordcard

  OT: I keep files in a folder that has disappeared from my office, I think it happened after the installation, I think it happened after the installation of the software for wordcard color

  Hello

  The problem occurs only with files on the desktop?

  Method 1
  I suggest you try the following steps:

  a. open the Recycle Bin on the desktop.
  b. If you find the folder you need, do a right-click on the file you need and click on restore.

  Method 2
  I suggest you try looking for the missing folder.

  Find a file or folder
  http://Windows.Microsoft.com/en-us/Windows7/find-a-file-or-folder

  Method 3
  I suggest you try the steps from the following link:

  Recover lost or deleted files
  http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

• Cannot scan pictures more. I clicked on the icon for HP Deskjet and then was able to choose "Scan Doc or Photo". This option is no longer

  Have not analyzed the photos for a long time.  When I did it before, I clicked on the icon for HP Deskjet and then was able to choose "Scan Doc or Photo".  This option is no longer.  Need help.

  If you use windows 7, start menu open then choose "all programs" and find "windows fax and scan" and open > then go to the lower left choose scan and then in the main menu, choose "new scan".
  or you can watch this video

  scan a document or photo with windows fax and scan

  "If your scanner is not connected or you have a problem with the driver is the message"
  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer, and then try again.
  For more information about adding or troubleshooting scanners, see Help and Support
  "

• HP Deskjet 2050 J510 - paper tray is full but keep the message that the tray is empty.

  HP Deskjet 2050 J510, Windows XP - new printer - error message paper tray is empty, but the tray is full.

  Looks like paper error output is to come. This is normally caused by dirty rollers. The document below will give you steps to solve the problem. If this does not work, try to do a hard reset. If is not running, you will need to replace the printer.

  "Out of paper" Error Message and the printer is not looking upwards or the paper feed:
  http://goo.GL/hVD48

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Successful installation of the reader is not successful

  Yesterday, I got Reader X on my PC and it worked fine.  When I tried to upgrade to reader XI, I downloaded it on my computer, and at the end I was told that the installation was successful, but the XI player don't show up anywhere.  This has happened 3 times.  So, I removed the drive X and tried to redownload the XI player.

  I downloaded Adobe Reader from the Internet, backup and run the exe file. In the end, I was told that the installation was successful.  However, the drive is not on my computer.  There is no drive on my desktop icon.  When I try to open a PDF document, drive is not listed as an option to open the document.

  Adobe Reader isn't in my downloads folder, even if I recorded it (when I downloaded it) and headed the exe file.

  I have a Compaq Windows XP desktop PC.

  How to properly install Reader on my PC?

  Try if you have better luck with the MSI installer: http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi

• Error "Microsoft Visual C++ runtime library has encountered an error and must terminate the program" during the installation of the patch for World of Warcraft

  Original title: runtime library

  When you install the game World of warcraft it installs ok but the problem comes when the patch is installed, when it is 99% done windows gives me an error message

  Microsoft visual c ++ runtime library then said he has encountered an error and must terminate the program, I never had this problem when I put the game on my HARD lecteur2 replaced because he was going to die on me

  My operating system is Windows Vista SP2

  Help me please if you can

  Thank you much xx

  Hi Hopson81,

  Try to install the patch by starting the computer in selective startup mode (also known as a clean boot state).

  Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• problems with the installation of the driver for hp 6300 all-in-one under Windows 7

  I have not install hp 6300 all-in-one driver a10_cdb_net_full_win_130_141.exe I downloaded from the HP website.  The diagnostics said: "this application has requested the execution to terminate in an unusual way.  Please contact the team for more information application support. "Please explain what is happening.

  Thank you

  Peter

  Hi petervol,

  Download and install the following hotfix below and then run the instructions to uninstall & reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77751-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  10. run the download to reinstall the printer

• Installation of the SP3 for XP now crush the latest system updates or interfere with programs like IE 8?

  In all other ways my XP system is up-to-date, with the exception of SP3. I never needed before. SP1 and SP2 have been installed at the time when they were new. Now SP3 is required to upgrade to some new programs. Installation of the SP3 at this late date crush the latest system updates or interfere with programs like IE 8? I don't want that my system is back to older parameters which are now outdated. If the system settings are changed, how do I know those who?

  No, this does not disturb.

• installation of the SATA for XP 8560p

  I have a 8560 with Windows 7 installed. I want to replace the drive (same type of SATA drive) with one another and install XP Pro.

  I read the posts earlier say collect information of the Windows 7 install and I should be able to change the Bios IDE mode, install XP without using the F6 driver load and install the drivers after installing XP. I don't have a USB floppy drive so I thought I might be able to use a USB but the F6 prompt is looking for a drive A: and he doesn't so I went with the installation of the SATA drivers after installing XP.

  In WIndows 7 Device manager it says the ide ata/atapi controller's (R) Mobile Express Chipset Sata ahci controller.

  With BIOS change IDE, I was able to install XP Pro SP2.

  The drive is detected as F: drive for some reason any.

  I installed SP3 service pack. I also installed various HP drivers for networking, display etc.

  When I go into the Device Manager it shows ide ata/atapi-controller.

  6 Intel series/C200 Series Chipset Family 2 Serial ATA Storage Controller - 1 09 port

  6 Intel series/C200 Series Chipset Family 4 Serial ATA Storage Controller - 1 01 port

  It only shows the R) Mobile Express Chipset Sata ahci controller.

  If I reboot and change the SATA BIOS I get a blue screen on startup of XP to load. Can only run as IDE.

  Don't know where to go from here.

  Someone help?

  Paul_Tikkanen wrote:

  Hello:

  This is the first:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5056949&prodNameId=5056950&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-104280-1

  It's this one:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5056949&prodNameId=5056950&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-78959-2

  Paul

  Thank you Paul,.

  The first will be not install because, guess what, he automatically wants to install in C: (no choice) which I did not. So there is a reason to reinstall.

  Second, it worked very well.

  Thanks for your help!

  Jeff

• Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

  I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for each device dialog box "the system cannot find the file (or reader) specified. The dialog box header is "Users/Philip/AppData/Local/Temp/7zS7D57/installation/hpzpnp"... »

  I can't get past this error message no matter how, I try to download and install. The printer still prints from another laptop in the network it is connected via the network, while the scanner is connected by USB.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  8. After completing the two printers installattions rename the old file name extension to Dat and restart your PC.

  Kind regards
  Shlomi

• I have a problem with the installation of the drivers for the Belkin card.

  Hello

  I just bought a new Belikin N150 USB Wifi Adapter. I went through the installation disc and all except that tooth was installing the drivers. I tried to install the drivers, and it gave me this error. Help, please! I am also on an Administrater account

  

  ~ Matt

  Hello Matt,

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You are able to install other software/drivers without any problem?
  2. You have security software installed on your computer?

  Try it out below mentioned methods and check if it helps.

  Method 1

  I suggest you to disable the temporary security on the system software and check if it helps.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 2

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  This error can occur due to permission problem in the registry for the USB controllers. I recommend that you take the permission to the registry editor USB. To do so follow the steps below.

  • Run regedit from the Start menu. Be sure to export a backup copy of the registry before continuing.
  • Browse to the location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\USB

  • Right click on the USB folder and select permissions...
  • In the dialog box, make sure everyone is a listed group and that the reading is checked.
  • Click the Advanced tab and make sure that include the permissions that can be inherited from the parent of this object is selected, as shown.

  

  • Go to the owner tab and be sure to replace the owner of subcontainers and objects is selected as shown.

  

  • Select Apply to apply these changes. A warning message may appear at this stage. Select OK to continue.
  • If necessary permissions for USB dialog box select , and then click OK to exit.

  Feel free to post them here if you need further assistance.

  Thank you.

• Calls for the CD with PDL_COMMON on the installation of the software for HP Officejet 4315

  I have a HP Pavilion 1540n running Windows XP SP3.  I try to install the software for a HP Officejet 4315 downloaded from HP website.  The installation was interrupted and it asks me for a CD entitled PDL_COMMON.  I don't have the CD and the software downloaded does not have such a folder or file.  Now what?

  Thank you, Bill

  Bill, I would recommend a complete uninstall of the product, programs and features, as well as the removal of all copies of the printer in the Device Manager or the printers and fax machines.

  Click START, and then click RUN. Type "%temp%" and press ENTER. This will open your temporary folder, erase all files here that it is possible - some may not be deleted, but most should be able to be.

  Then follow the link here:

  http://goo.GL/ef1Ay

  And install the printing software.

  Let me know how things are going!