Sudden problem with XDCAM in first Pro CC (xd5c) files

Similar Questions

• Problems with playback paused, first Pro CC 2015 and SpeedGrade CC 2015

  Hey, I encountered recently some problems running first on my Mac. I have recently updated to version beta of OS X El Capitan, but I think I used first since then without any problems. Recently, whenever the video is paused, the image becomes discolored and strongly pixelated and rasterized. When I play the video, it is fluid and everything seems normal, but as soon as he suspended, it goes back to the discolored photo. Thinking it was just a glitch that would not appear anywhere else, I went to edit together a project runs, but when I linked to the wire to 2015 CC SpeedGrade, the image is the same picture faded from first, and, as before, it only shows when stopped. What color correction, the program saw the discolored part of video as the true color of the video, making me to not be able to correct the actual color of the video. When it is combined with first, the initial problem happened again where he showed only the part discolored when paused.

  Sorry if it's confusing, I tried my best to describe it! Any idea what I could do to fix this?

  Hi Aidan,

  The same thing happens when video converter is passed to the software only?

  Thank you

  Regalo

• Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Hello

  I suggest you fine the link below and it will help you.

  Does not open App | Wheels of progress turn continuously

  Concerning

  Maansee

• problem to install the first pro cs6, I have 32-bit Setup

  problem to install the first pro cs6, I have a 32-bit Setup

  Hi alicia220912,

  64-bit support is required to install the first Pro CS6. You won't be able to install it on the 32-bit computer because it does not meet the minimum requirements of the system.

  Please check the minimum system requirements at: http://www.adobe.com/in/products/premiere/tech-specs.html

• Since I upgraded to CS6, I had problems with the permissions being changed on my files!

  Since I upgraded to CS6 I had problems with the permissions being changed on my files after that I have download on my server. I don't know how to fix this. My webhosting service says this is an issue on my end and it seems that CS6 has a CS5.5 with no glitch. How can I fix this to happen?

  Have you installed the 12.03 CS6 update yet?

  Adobe - Dreamweaver Support Center: Updaters

  12/12/12 The last update for Adobe Dreamweaver CS6 includes optimizations for the HiDPI screens, improves performance in Code view, rendering Live View and permissions of the FTP transfer problems addresses.

  Don't forget to restart your computer after installing the updates.

  Nancy O.

• problem with upgrade to Premier Pro 2015.3...

  I have a project that has many layers of clips... it's all good for the month in the old version of the first pro - I upgraded to 2015.3 and now in the world of pain - some multilayer clips now turn green. I can clear the issue sometimes, but he always comes back. original files are not damaged.

  any help appreciated.

  should I uninstall and start again?

  Of course... There are MANY of us that do. Which I am part.

  I have the CC2014.2 (versions 8.x), CC2015.2 (version 9.x) and CC2015.4 (version 10.x) loaded on my computer now. I have multiple ones 'open' at the same time, but have never had a problem having several... other versions of tracking who 'set' of programs go hand in hand, of course.

  If you use several programs of the "DVA", digital audio/video programs, they must be in the games of "corresponding". Although they do not have the same serial numbers of construction between programs, the CC number is little used. So I have a complete set of PrPro, AfterEffects and SpeedGrade for the 8.x and 9.x builds and build PrPro, AfterEffects, prelude and the hearing of the last series. Hearing works with virtually all of the builds.

  Not really aware of what problems there, as it is a designed process. Best practices, such as recommended is to migrate a project "forward" mid-project, to complete a project in version appeared in NEVER. This assumes of course that we keep the latest version of a series in full operation as we start new projects in the new series.

  Neil

• Problems with AVCHD and Premiere Pro CS5

  Hello world

  I am a rookie with the first and AVCHD format, and this is my first time that I write on this forum. I hope you can help me with the following problem:

  I turned of the AVCHD clips in 1920 x 1080, 25 fps. I managed to create a project in first Pro CS5 (not a trial version), but unfortunately, I did the project with preselection of 720 p. After that, I learned that it is wiser to create project 1080i and adjust if necessary export 720 p phase down. Seems reasonable. Well I've started it all again and created a project of 1080i. For some reason I do not understand first do not recognize and import my clips and have not yet created sequence01 (default name) in the project window. Does anyone have an idea why this happened? I tried several times but the results have been as bad as the first time. Yet a 720 p test project has not imported clips. What makes this weirder is that after and hour or so I tried once more and this time everything went well. Everyone knows a similar situation with AVCHD and first CS5? This could be a problem first or did I do something wrong? I use Windows 7 64-bit.

  Another thing I thought is that what are the best export affecting export AVCHD 1080i (or 720 p) a project on YouTube? As I found alternatives: mpeg2, mpeg4, H.264, wmv... And is it important if I export the video first or encoder Adobe? In other words, all the tips for successful taken YouTube video are welcome.

  Thanks in advance!

  When things go weird reboot pc.

  Sequence must correspond to images which in this case his 1080i50.

  You choose a preset or drag an item to the new icon.

  

  

  To export on YouTube:

  Export should make it faster than the queue.

  

• Problem setting transition duration first pro cs4. Is this a bug?

  Hello world

  I have made a project of first pro cs4 and I'm having problems setting the duration of transitions between clips. I have my default transion set to cross dissolve them and 15 frames in length. When I try to lengthen, it seems that first makes two transitions in instead of a longer one. So, if for example I got a clip with a dip to black when I extend more than 15 default images to say 30 images I get two separate transitions one after the other instead of a long. I know it's difficult to understand so I downloaded the video on youtube. If fast forward you to the minute 01:20, you will see the latest bland given away with a dip to black transition and the you'll be right flash a bit after the last light disappears. I hope someone can help me solve this problem, as I'm completaly lost. Thank you :-)

  Work waaay too hard at this, dude.  Just use the default chained.  It gives you good fade to the top using all 24 images, no adjustment necessary.

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• Problems with multitasking on Satellite Pro P200

  I am the owner of a new Satellite Pro P200.
  I use this laptop to use software such as photoshop, indesign, etc.

  * Now I have problems with multitasking! *
  It is not possible to run 3 programs at the same time.
  That I have to restart my laptop again and again.

  Does anyone know what is the problem?
  Can someone help me with this problem?

  For two weeks I have P200D. I use it for work and use different applications at the same time. So far, everything is OK and I am very satisfied. Maybe you should try to optimize the operating system:
  -remove all software, you do not need
  -disable the startup of unnecessary software of automatic startup (MSCONFIG)
  -customize the appearance
  -information on the open performance and Control Panel tools and use tasks on the left side to improve the performance of computer s

  P200 is powerful enough and must be able to manage with a few applications running at the same time.

• Problem with the formats video pro update 2.0.4

  Hello

  I have a problem with FCPX that appeared after I installed that formats video pro update 2.0.4 (very probably related to this update because had no problem before it). Final assembly runs very slowly and when I try to quit smoking I get a message that says 'Cancellation tasks background' with a progress bar that never begins. I opened the window of background tasks and there is no background running task. Only force leaving the application closes.

  System specs are:

  FCPX version 10.1.4

  Mavericks OSX version 10.9.5

  MacBook Pro 15 "in early 2011, intel core i7 at 2 GHz, 8 GB of RAM"

  Any help would be massively appreciated! Thank you

  Start by removing the preferences. Press the command and option keys at startup and confirm.

• Problem with JAVA on Sateliite Pro 6000

  I have problems running versions of Java 1.4 and higher. My laptop freezes and has to be restarted. Since I found that other users of this model of laptop in our society have the same problem.

  Is there a known problem with the Satellite Pro 6000? The problem does not appear to affect personnel with laptop computers Tecra.

  Any help appreciated.
  Thank you

  Hello

  Can you give us more information on this subject? What OS did you use?
  I put t know if it helps but you can try to update the drivers (graphics, etc.) and the BIOS.

  Good bye

• Problem with Intel WM3945ABG Sat Pro P100 wireless

  I formatted my Satellite Pro P100 and re-installed XP Pro SP2 (after the driver installation guide for the Web from Toshiba site). Originally, when I installed the WiFi drivers, I didn't install the Intel wireless client as I wanted Windows XP zero config to do all necessary things. I came to use the WiFi on my Tosh yesterday with my wireless network and was faced with not being able to find either of my 2 AP - so after switch double check the WiFi was on, I started my spare laptop and found them immediately.

  Fortunately my spare laptop also has an Intel wireless card so I made sure that all my settings in the properties of the device match (best I could since one is a model of diff), but the default settings matched. I then continued to update the drivers from the Intel site - this time, I installed the Intel Wireless Client. I noticed that the Intel client icon in the system tray is lit blue (so I guess that its on), then changes the clear logo with a red on X. When I open the Intel customer and try to turn on the Radio via the menu dropdown but I get an error saying "the intel pro/wireless network connection is still disabled. Use your hardware switch to enable it. Although the wireless switch is on and the light orange light it up! Utility troubleshooting Intel said almost the same thing and the observer of events of Intel wireless display not all entries after cranking up what I am trying to turn on the radio via the client and the message I can get is "Radio off by IWA.

  In my frustration, I noticed that my keyboard has a function (FN + F8) key to activate wireless however I tried to load the hotkey Toshiba (& common Modules) wireless drivers U200 its not listed for the P100. Alas, no money after pressing FN + F8 will make any difference - I checked and the Toshiba Wireless HotKey (toshkcw.exe) runs in the 'process' of the Task Manager. Unfortunately, I've never tried this shortcut when I still had XP Home installed so I can only assume that HK is not supposed to not work.
  After that, I tried to uninstall the drivers again and reinstall the drivers from the Toshiba site downloads and always end up with the same problem.

  ... Is being short of formatting again and from scratch there anything else that I missed?

  Cheers for any help you guys can give!

  Hello

  It is really not easy to say what is missing here. As far as I know that satellite Pro P100 is already preinstalled (comes) with WXP Pro and I really don t understand why you try to install this new but without recovery media. Perhaps because of the other language?

  In any case, you can also install your own operating system. All the drivers, tools and utilities must be installed in the correct order. Check the document facilities instructions on the download page.

  It will be really interesting to know if it was the problem with the factory settings. You cannot mix designed models of different laptops Toshiba tools because it is not the same (U200 tool for P100). This FN + F8 option should appear if the right tool or utility is preinstalled, but please don t ask me that one. It's really different from unit to unit and facilities plan is similar but not the same thing.

• Sudden problems with Airplay, Apple TV etc with WAG320N

  Hi all

  Until recently I use DSL through my WAG320N and it worked perfectly. I used my AppleTV with airplay, Vuze, Xbox and so on without problem. I just moved to a new address with internet fiber. I've reconfigured the router for all route (and not an ADSL modem) by assigning the first to act as a WAN port ethernet port. Internet works fine as speed goes, but the wireless LAN is not optimal. I can't get my AppleTV to find iTunes on my laptop and Airplay is very slow and laggy. The router settings remained unchanged at first, but now I tried to reset to the factory settings and start over, this does not solve the problem however. I'm a bit puzled on this, as I know, the change of service provider (and go from ADSL to the fiber) should not have effects on the local network? I noticed that Vuze complains about problems NAT (just need to confirm that there is a NAT problem), but this should not matter in which of the local network, right?

  Any ideas what the problem might be?

  These devices are mentioned connected wireless? This could be a problem with wireless. It may be because of the interference. It is possible that in the new location, you have two or three neighbors who affects the Wi - Fi wireless signal. It is also possible that some other wireless devices are causing interference like cordless phones that moving on the same frequency with the router, the garage door openers and microwave machines. What you can do to prevent the interference must reconfigure wireless settings. Set width/bandwidth of 20 MHz channel and set the standard channel 1, 6 or 11. That should help him.

• Sudden problems with Adobe on Mac

  I have a Mac I-.  Used for years with Adobe to read and print PDF files.

  Yesterday, all of the sudden many questions.  Could not print some documents.  Other documents looked very strange, with black background and green type.

  Today, the message is that Adobe Reader cannot be opened.  As a result, cannot view or print PDF files.

  What is the problem?

  Hi jattogox96140952,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  Would like to know is what is happening with some or all of the documents.

  For printing issues, please refer to this article:- print troubleshoot PDF in Adobe Acrobat and Reader

  If the problem persists, then would you please check with the account of another user with Admin rights to reproduce the problem.

  Kind regards

  Christian