Similar Questions

• Cannot select audio clips

  I don't know it's easy... but...

  I have some audio in the order that I can't select or change.  He has NOT locked (no slanted lines) and I can move that clips on the same track without problem.

  I'm trying to garnish, add a cross dissolve etc but I can't select it, pick up and move or something.

  The header on this clip has also gone gray.

  The audio plays perfectly, it's just I can't select it!   Arrgghh!

  Help!   I can't understand it.

  Am I missing something simple?

  It's simple, but not at all obvious:

  

  If you need to show track keyframes or see the track selected Volume, you cannot select or move your audio files (unless you take the video portion). The reasoning is that, while the clip keyframes/volume adjustment is compared to the time of the sequence, setting track volume keyframes is absolute at the time of the sequence. It is a sort of "save me from myself" from the thing, where the assumption is that you want to adjust only the volume of a track, once your clips are in their final time of the sequence positions. By not being not able select audio while you adjust the volume of a track, you are prevented from moving accidentally your audio while adjusting the levels/keyframes. It is a good idea, but it is not at all obvious what is the solution when you don't know what is the problem!

  Hope that helps...

• Cannot select audio developed

  If you have a sound channel that is not related to the video (i.e. you have the irreversible) and you expand the height of the track to display the keyframes and waveforms, you are no longer able to select the track or clip.  Need to reduce the height to a single height in order to select.  Does anyone else have this problem?  I'm under CC 2015

  Try to turn off the display of the keyframe.

• CC 2015 - cannot move the source window audio in the timeline.

  Anyone else having this problem?

  The only time where I'm able to get audio in a timeline is when I create a new sequence by dragging a clip on the sequence button.   All other methods I try fails, no error message or anything - it does not simply any element by dragging.

  The only solution that I managed to find is to drag the video / audio on the new sequence button, creating a new sequence and subsequently be able to copy and paste in the original timeline.  Obviously not sustainable.

  Thoughts?

  Is your source patch and the track corectly set of targeting:

  

  MtD

• Windows Media Player stopped being able to rip my CD all of a sudden, get the error message: "Windows Media Player cannot extract one or more tracks on the CD.

  All ripping music CD's, I started advice came saying "Windows Media Player cannot extract one or more tracks on the CD", not allowing not rip me all traces on any CD since it first appeared! I had already ripped off several before CD what happens without any problem, now nothing... Always play the CD no worries, won't just rip, anyone got an answer to this problem?

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to refer to article and change the settings for ripping:

  Change settings for ripping

  http://Windows.Microsoft.com/en-in/Windows-8/change-settings-for-ripping-music

  Let us know if it helps.

• Keyboard shortcut for source patch?

  Is it possible to assign a keyboard shortcut to control the source patch? Likewise, you can enable or disable the target track.

  Yes. It's a two-step process:

  (1) set up source patch, right click on the Source patch 'column' > Save Preset. In the Save preset dialog box, select a shortcut in the keyboard shortcut control. Click OK.

  (2) in the keyboard shortcuts dialog box, find the shortcut (s) that you associate your presets and assign shortcuts to them.

• Error scan Dell: failed to initialize the selected paper source

  My Dell Scanner doesn't scan.  error message: failed to initialize selected paper source. Thanks for your help with this.  It's a Dell Photo 926

  Hello

  From my research, I want to suggest to follow the steps mentioned below:

  (a) make sure that you have installed all Windows updates, you can either install update via Windows Update or download it manually. Here I recommend you to install the latest Windows 7 and Windows Server 2008 R2 Application Compatibility Update.

  Windows 7 and Windows Server 2008 R2 Application Compatibility Update

  http://support.Microsoft.com/default.aspx?kbid=974332

  b) unplug the printer.

  c) download Dell Photo all-in-One Printer 926 Patch to completely remove the printer from your computer. You must run this patch until he asked to restart the computer.

  Reference the Dell Photo all-in-One Printer 926

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&l=en&s=BSD&CS=04&DriverID=R166248

  (d) restart your computer.

  (e) to download the compatible driver Windows 7.

  Dell Photo 926 all-in-one printer

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20Photo%20926%20All-in-One%20Printer&v=Dell&uid=DELL926&pf=0&pi=3&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit

  (f) install the driver when connecting the printer (power on) via a USB cable.

  Hope this information helps.

• Cannot burn Audio or data by using Windows Media Player CD

  Cannot burn Audio or data on Media Player get an ERROR!

  Very well, I was burning cd I burned a couple and a third, I put the disc in and it showed that it is in their. I did my burn list and clicked on start to burn. He acted as if she was going to burn. It is on the first track for a minute or two then came red of lil DEPISTENT what ERROR which track this continues through all the tracks. I've ruined several discs. I tried to reduce the speed of combustion and that did not help at all. I also have problems with getting the DVD to read. Read some DVD movies and some will not. I did Diagnostics on the burner itself and it keeps coming back that it works correctly and everything goes well with the material itself. Please someone help me.

  Hi Leynak,
   
  1. What is the exact error message you get?
  2. don't you make changes before the show?
  3. when exactly the burn process stops?
   
  If the song is playing, but the burn process continues to stop when inspecting the song, try turning off the upgrade of the volume:
  1. click on the arrow below the burn tab, and then click More Options.
  2. turn off the volume apply upgrade across tracks on the CD check box and then click OK.
  3. try burning the CD again.
   
  Visit this link for more information: burn a CD or DVD in
  Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions
   
  Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/Burn-a-CD-or-DVD-in-Windows-Media-Player
  Also check if Windows burn engine burns the disc without any problems. Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Burn-a-CD-or-DVD
   
  Try the steps and post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Remote control Medai vs STR-DN1040 cannot change the source?

  I just installed my Sony STR-DN1040 home theater receiver and have a few questions about the media remote ap...

  (1) I have it all connected and registered and the ap is functional, but in "remote mode", it lists all entries in my (BD, cable/satellite, DVD, FM, etc) as buttons, I can support on and they light up and make a tone of confirmation on my iPhone 4s, but they do not change the source to the receiver.  The rest of the features seem to work and if I use the media remote ap for go to the GUI menu, I can arrow over 'look' and then select a source, and that works fine.  The problem is when you are in another room and want to power on the receiver, then choose an audio source and play without having to turn on the TV or be in this room, you can't (or at least I can't) because the hot-key source on the ap do nothing.  What did I miss?

  (2) I have programeed the 1040's physical remote to control my Samsung Blu - Ray player.  The Medai remote access point can now also control it, or is the 1040's remote physical a completely separate device?

  Thank you!

  Hello Apcrews,

  The STRDN1040 was intended to be used with the Sony 'TV Sideview demand' which includes many new features and replace the existing approx. remote media TV Sideview will will allow you to switch between inputs, however there is no visual feedback in the app, so you'll need visibility on the front panel of the receiver or GUI.

  The application will not work to control your player of Samsung BD. The reason is that you have programmed the 1040's physical remote to control the player of comic book via codes IR (infrared), these codes resident in actual distance rather than the receiver and the orders are sent directly from the 1040's remote control.

• Receive the message error "Windows Media Player cannot extract one or more tracks from the CD"

  Original title: Windows Media Player 12 in Windows 8 - will not tear, will not allow rip parameter changes

  Recently started Windows Media Player displays this error message when I tried to rip CDs: "Windows Media Player cannot extract one or more tracks from the CD." When I checked the rip settings, I found that no location has been chosen, even if I had chosen a location when I first set up WMP over a year ago. When I clicked on the "Change location" button, nothing happened, so I'm not able to choose a file location. I downloaded and Fix It (http://support.microsoft.com/mats/windows-media-player-diagnostic-Windows-8/en-us) from Microsoft allows WMP and the library, hoping this would solve the problem, but the problem persists. After that, I also found that none of the rip settings can be changed, not only the location of the file. I get an error message that "ripping settings could not be applied" when I try to change anything on the tab music Rip under Options. I found a support of forum responses that mention a registry fix but does not provide any details on how to achieve this. Any ideas would be greatly appreciated.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Ripping allows you to put the titles of your audio CD on your PC. When you rip the tracks, they become digital files on your PC.

  There are two places in the Player library where you can customize your settings and better to make ripping work:

  • In the Rip settings menu (with less choice customization).

  • In the Options dialog box (with several choices of customization).

  Method 1: run the tool library, Windows Media Player and Windows Media Player settings and check if the extraction is possible.

  Step 1:

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press ENTER.

  c: now, click on programs.

  d: and then click Windows Media Player  library.

  Step 2:

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press ENTER.

  c: now, click on programs.

  d: and then click Windows Media settings.

  Method 2: Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/change-settings-for-ripping-music

  Answer please if you have any questions.

• The selected data source is read-only

  Someone knows how to solve this 'problem '.

  The selected data source is read-only. You cannot change the view configuration.

  Thanks in advance.

  My solution to this has been reset in the field of data and download information again. I know that it is not best practice but it works

• Add selection to source monitor timeline?

  I want to select audio then mark the range in the timeline. Is there a way to get the selection or markers in the source monitor to appear in the timeline panel so that I can change based on that?

  I can note the time in the source window and then manually duplicate the selection, but the time is way too big for me to use. I want to choose a range of somewhere unknown audio samples within a millisecond.

  Get the viewer and synchronized timeline and click on the key in the viewer and select Source Gang and program. Where you move the playback cursor in source, the calendar will follow.

  MtD

• audio source, but not when you drag on the timeline

  Hello

  I was just change some videos taken with a digital SLR, and the audio is in the source, but not when you're dragging to the timeline?

  I see there is an option to select drag video or audio only, but I can't select audio...

  No help with tis please...?

  Kind regards

  Sabine

  http://forums.Adobe.com/thread/1374590?TSTART=0

• APP-SQLAP-10380: you cannot select this payment document

  The user did a quick payment. When the audit failed to print user canceled the check and tried to reproduce. Now, when the user tries to repeat the verification that they are getting the following: APP-SQLAP-10380: you cannot select this payment document because it is used by another batch of payment.
  
  I crossed from Metalink and found this article: R11i: prompt payment for EFT payments will be withheld the Document to pay other bills [158828.1 ID]
  
  A query in the metalink article said that "If this query returns rows then contact oracle for data correction support.
  
  The query did return rows. However, this is quite urgent and I'm not sure what Support Oracle will get back to me. I did a Sev 2 SR for this. I was wondering if there was things from front end that I could do to clear this batch of payment so I could reissue a check?
  
  Any help would be appreciated.
  Thank you

  Please see these documents.

  R11i: SEPA: AFTER the PATCH 6741280, PAYMENTS QUICK ERROR APP-SQLAP-10380 [ID 1060865.1]
  App-Sqlap-10380 you cannot select this batch of payment of the formatted payment document [ID 309655.1]
  APP-SQLAP-10380: you cannot select this payment Document because it is used by another batch of payment [1335053.1 ID]
  R11i / R12: FAQ for single European payments (SEPA) [ID 791226.1]
  APXPAWKB after using the Format of payment NL for prompt payment, payment Format cannot be used [ID 250332.1]
  Impossible to enter Quickcheck Eft Polish formats [397791.1 ID]

  Thank you
  Hussein

• OS Sierra: Cannot play audio via bluetooth are involved during airtime

  Cannot play audio via bluetooth speakers during airtime to my TV.

  Has been able to do before the OS Sierra update. Now if I switch to my bluetooth receiver in the system prefs-> sound-> menu "exit" it disconnects completely airplay. This happens both with mirroring and use as a separate display.

  Is there something that I am missing on the behavior of this feature? Or is this a bug in the new OS?

  Mac OS Sierra worm 10.12

  MacBook Pro (13 inch, early 2011)

  I have a similar question, with the siera update I can no longer audio to my bluetooth headset output, they are connected but do not appear in the list of audio output. :///