Add selection to source monitor timeline?

Similar Questions

• Reset the Source monitor timeline

  When the claws come out my camera and are placed on the timeline, the time does not start to 00:00:00:00 but that ever time the camera placed on the clip.  Is there a way (or a workaround) to redefine the time in the Source monitor to 00:00:00:00?

  PS. I know how to put my camera at the start of a shooting at 00:00:00:00, but it is impossible to switch several times to the 00:00:00:00 during a 20 minute session fast movement.

  You can right-click a file in the project Panel and change the timecode to start at all times as you want.

• Framework of correspondence in the source monitor to the selected image in the timeline?

  I would like to put the current time on an image placeholder in a clip on a timeline, then match that frame in the original clip and displayed it in the source monitor.  Avid does this, I can think of a work around in first, but hoped that there is a solution simple click.  Thankx.  Kevin

  The first command is sequence > Match Frame. The default shortcut is "F."

  If multiple items are stacked in the timeline panel, first select the one that you want to match. If no clipping is selected, then Match Frame goes to the clip on the highest targeted track.

• Is it possible to add audio keyframes to a source clip in the source monitor?

  Hello, is it possible to add audio keyframes to a source clip in the source monitor? (Not the chronology)

  I would like to dive and pre selectively switch off at the source-clip in the trash.

  Bonus round... are waveforms audio visual available somewhere in the source monitor Panel?

  Perhaps with a thread of keyframe-able?

  Thank you very much

  You can not key frames in the source monitor Panel (the Master Clip function applies not to the audio only).

  For the waveform to appear: fiddle the cursor or the playhead in the SM. (this is a bug).

• I can't drag my audio source to timeline sequence monitor, no action icon appears?

  I can't drag my audio from a clip placed on the monitor of source file to a sequence of time line. Also, if I tried to drag my clip in the source monitor to the timeline, video only appear in timeline, no audio is displayed. What is the solution?

  Click on A1 to select the audio patch

• Two toppings selections in the time scale to the source monitor. (First Pro CC2014)

  I'm really confused by this apparent novelty or glitch, pp. I'm working on an old project that has been improved cs6 by CC and now the CC2014. Several of my videos have evolved at a different point in the source media, so the clip is always the same length on the timeline, but contains a completely different part of the film. When I double-click the clip in the timeline to open it in the source monitor, I get two balances on the scale of time like this:

  

  I'm quite confused by the present, I have never seen this. Especially I don't seem to be able to move one of them independently of the right section of the images enter my cup, and I can't delete any of them.

  Is this something that is due to the upgrade, or is it a setting/preference changed CC in 2014. I did have this problem in any other project before installation of 2014 earlier this week and now I hesitate to initiate other projects in the case where he made a mess of them also!

  The blue part is the video the audio part green (this has always been in first)

  If you check selection bound (next to the key) it will probably be 'fusion' when you double-click it.

• Cannot paste, insert a clip to the timeline Source monitor in CC2015.3

  Someone at - it a solution or a fix for this problem? I am currently using, to make a paste insert and am getting an error.

  - The hotkey to make a paste insert does not work in the source Panel to place a clip on my calendar. I get a pop up Clip Fit I've ever seen before, all the boxes are shaded & the only option is the sequence ignore exit point. Then we glue the clip at the beginning of the timeline, regardless of where the playhead is.

  It also States that the source is longer than the destination, regardless of trim (I & O) points I made in the source monitor. The source element is only 3 seconds with my points of toppings, so it makes no sense.

  Is this another bug 2015.3? How can I fix this please. Would like to make a paste simple insertion of the source monitor

  Check that you don't have to points together on the timeline, if the playhead is not parked at the point of in.

  Timeline to points will take precedence.

  MtD

• new mac pro 6 core 64 GB of RAM: reading late 4K files timeline and source monitor

  Here is my speed.  not that I understand all the details of this test, but it seems relatively quickly.

  I experience lag during playback of 4 K, the monitor source or online images of scene.  in other words, when I hit play it takes half a second to one second to read.  Once he plays, he has no problem.

  deselection of video keyframes, remove all unused audio tracks (3 cam project) does not help.  Once a clip plays back (and it reads without problems as I said), when you can come back at the beginning of the clip (up arrow), he rereads - i.e. begins once again - no lag.  in the scenario, let's say you chop a 20 minute interview (ok, in detail: each element seems to be 05:51 long and about 5 GB, h264 - must be an automatic feature on the camera in terms of storage - in other words, no large files of 20 GB or whatever it is)-so when you this chop into smaller pieces, when you then go further down the same hashed clip It is delayed once again.  even if it is the same file on the computer.  then return to the where it did not delay initially, this part now shifts again.

  When I put the 1080 p prores files in the project, fast lighting everything.  (I'm talking to navigate and manipulate items in the editing or even source monitor Panel.  I'm not talking rendering and output.  "I think it works very well.)  I'm at the limit of whats possible with my machine and the sequences of 4K with PP?  This is the format?  intuition and several years of experience tell me whatever it is 422 still works perfectly but nothing h264 will always be even the fastest machine to work so hard.  right?  evil?

  PP CC was last updated

  El capitan (guilty?)

  today work with 5400 1 speed 4 thunderbolt to drive rocketstor toaster.  not insanely fast, but as I said, once I got the game on a clip I already hit play previously, it works without lag.  So how is it possible?  What is this feature that makes this place?  There seems to be things loading in the bg who then are responsible - and when you place this specific element to the following, even if both refer to the same file, you have this lag again.  between the second half and second complete.  I exported a file of 5K h264 in a different project and the computer, finder, quicktime etc has no questions immediately play it back.  What gives?

  any ideas?  I thought that a machine of $5K don't experience any lag really.  No I don't want to throw money to solve the problem, but you know what I mean.

  Thank you!

  Michael

  PS: I just checked one of my files to QuickTime.  Yes, here also a half second delay on the play button.  not powerful enough system for reading 4K flawless?  are my criteria for impeccable speed on computer too high?

  

  

  Post edited by: michael freund

  Throw 4 k on a timeline dramatically ups the flow required for EVERYTHING on the computer. Understand, that for 'typical' UHD (1920 x 1080) as I work with, my pc is a 4-core i7 (8 "virtual"... Yes, whatever) 3.5 Ghz (2 cores overclocked as which proved faster in operation), 32 GB of RAM (RAM frequency has been changed too), GTX970 / 4 GB vRAM for graphics.

  I have a decent drive in this machine... Setup but put most of the things PrPro on a WIDE, material faster striped RAID-0 would work as well or better.

  -: Twin 250GB SSD in RAID 0 for speed system, used for the OS & programs ONLY;

  -250GB SSD for the system cache and cache/database files also PrPro;

  -Disk internal 500 GB at 10 000 rpm, previews; (kept fairly clean, less than a third full)

  -Disk internal 3 TB, project files;

  -Internal drive 2 TB, media files; (maintained below 50%)

  -Internal drive 2 TB, exports.

  This extends to the work of in/out/cache disk so it is not slow things down, and so the CPU can be better used. I do stuff test & family here, keep the media on a PNY 128 GB flash, read-only drive so the USB3 who is fast enough.

  Other things, such as documents & upload files, storage general file, is on other players. This keeps all the foregoing, including the system drive, pretty skinny and good working condition.

  The newest Samsung T1/T3 external SSD drives have been tested for incredibly fast work flow, much more than other readers USB3.

  And of course, the internal drives m.2 must amazing flow.

  It is a system of 'balanced', having enough of every bit of available material nothing stacks up this CPU.

  Then... you can watch your disk configuration. You may need a higher throughput...

  Neil

• I can not get video monitor timeline source I get an icon on the circle of the hand and the line through it

  DEAR LORD

  I have PP CC. I imported all the files for the video editing of music. RED dragon files, they play in the source monitor but cannot be deleted in the timeline WTF?  lol FILES can be entered with left hand BIN for the monitor source, no problem. Its Source is on my calendar.  I AM ASKING YOUR HELP TO SOLVE THIS PROBLEM? Joseph.

  Looks like you got your disabled source patches. It is the first column of boxes in the timeline, V1, A1, etc.. Make sure that the respective patch is enabled for the source that you want to drag in the sequence, and you're falling to the type appropriate way, for example video for video, if only one video is patched.

• Why does my audio play in the source monitor, but not in the timeline?

  I imported some MOV files in first 2015 (codec H.264, PCM Linear, timecode).  The audio plays fine in the source window, but when I drag the clip to the timeline, no audio file appears under it and there is no sound.  I followed the instructions on this link, nothing helps: no sound during playback in Adobe Premiere Pro.

  These clips were filmed on a GH4.  I was shooting 1080 24 fps.  Before this problem I was shooting on a Canon 5 d.  Is it possible that it is the codec?

  Video playback in the timeline panel is also trolling and jittering a bit, but normally play in the source monitor.

  If anyone can help, please excessively it because I am not very fluent in the first.  Thank you.

  Source patch http://forums.adobe.com/thread/1442800?tstart=0 can help

• Back 2 Mono tracks on 1 stereo track on the timeline, or source monitor?

  I worked in first Pro CS 5.5 and I went Audio on a clip to 2 Mono tracks instead of its original 1 stereo track. I brought in the Source monitor, and then on the timeline.

  Then I realized later that I wanted to switch the sound to 1 stereo track instead of the 2 Mono tracks.

  I couldn't find a way to do it.

  It is possible to do this? In the affirmative. How?

  Thanks in advance?

  I pan 2 mono tracks left and right then nest.

  Nest sequences

  Note:

  Beware of any disposal or cancellation.

• Timeline on External / Source monitor

  I am currently moving to CS5 Prod. Prem all recently installed applications.

  Prem Pro, how can I get the images placed in the chronology of the gang for the Source monitor Panel sequence or output to my external monitor? Since the source monitor Panel, I can choose the sequence, but when I manually rub back and forth through the sequence using the timeline there is no output to screen external TV only for the program monitor funds located in the PP. space

  Thanks in advance for the help. I don't know that I have many more questions. I'm above A migration / FCS3.

  -John

  I went through a Blackmagic intensity Pro HDMI/component/composite pci card.

  Okay, that's important information that should have been part of the original post. With a map of the BM, you should use their sequence presets; This should allow broadcast through the map.

• clip of waveform in the source monitor

  How to me audio waveform of the music video to be displayed in the Source monitor, so I can edit audio. I am aware that I can Alt + click just the audio in the timeline panel to bring it in the Source monitor (it's what I want), but making it separates it video - if I adjust the entry points, and it affects only the audio not video.

  Also, on a related note, any suggestions on how to add changes directly in this view audio source? What I mean is that I often edit the clips of the interview in the timeline and later need to edit small sections, false starts, the differences, er and um's, breaks shake, etc., and I need the cups to be exact. However, the tool blade do not work in this window to fix this that I find myself by placing two markers, then selecting the tool blade, go to the time line and then make cuts. I wish if I could just make cuts directly in this window.

  To view an audio in the Source monitor Panel clip when the clip is in the Panel project, double-click the clip, or drag the item to the Source monitor. If a clip contains video and audio, you can view audio in the Source monitor Panel by clicking the exit button and selecting the Audio waveform.

  View of audio clips

  any suggestions on how to add changes directly to this point of view source audio?

  Cannot do.

• Transmit mercury only shows the program, not the source monitor monitor

  Hello people,

  For some time now, I have this problem where only the signal from the program monitor is sent to my external monitor. The source monitor working within first on my computer monitors, but will not playback on my external monitor. It is in each project unique im working on and I find it very difficult to identify the problem. It won't work when I drag a clip from a location to the source monitor or make a match frame of the timeline. I would add also that sometimes, but not everytime, when the program monitor transmits very well and I do a double click on a clip in the tray or drag it to the source monitor, my external monitor goes black. This also happens when you do a correspondence framework. And to add another weird thing, the audio is being transmitted by the source monitor. First pro audio is routed through my external monitor. I can just hear end during playback of clips in the source monitor. It's just the video that will not be displayed on my screen.

  
  

  My hardware is just simple Quicktime mov with ProRes in them in 1920 x 1080 so nothing special.

  I have the latest version of first and my driver for the monitor of Blackmagic Mini is also updated.

  I'm open to suggestions!

  Thank you!

  I think I solved my problem.  After a lot of troubleshooting, we ransacked the Premiere Pro preferences (hold down shift + option while launching the first) and the source has been restored.  Or my preferences were corrupt, or else my system has been set up in the reading panels and Audio hardware preferences.

  Unfortunately, after a few days the reading of the source monitor went out again.  I trashed my preferences again and reading has been restored.  I'm still trying to understand why this has happened.

  To answer your questions.  I am using a monitor.  He has worked with AJA Kona, but we recently went to Blackmagic so that we can use to Resolve.  I do not know if yes or no the Blackmagic was initially working right, but I don't think it was.  I got stuck on a large project, it was a few months before I could make a test or troubleshooting.

  I hope this helps!

• A fall audio when you drag the clip from the Source in timeline panel

  I have problems with the audio being dropped when you drag from the Source to the timeline panel. Audio is present in the Source Panel and plays a lot with video, but when I drag the clip selected in the timeline, it drops off the audio.

  Cannot transfer video from the timeline source monitor

  It is a response to a previous topic on video, but the same answer applies also to the audio