Suggested change OS to 2015 of Intuit TurboTax

Similar Questions

• Having a little problem for a Netflix movie to start. Tried restarting of silverlight by no avail.__Netflix rep suggested changing the user nam at adminastrator. How do I?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        Have you been able to play before Netflix movies on the system?

  ·        What happens when you try to play the movie? You get the error message? If Yes, what is the exact error message?

  I suggest you to uninstall Silverlight on the system then reinstall it on the system and check if the problem is resolved.

   

  Step 1: Uninstall Silverlight

  a. Click Start and select Control Panel from the list.

  b. click on add and remove programs and look for Silverlight.

  c. right-click and select uninstall to remove programs.

  d. check in the programs folder if there are points listed and associated with Silverlight.

  If so, then remove programs.

  Step 2: Install Silverlight

  Install Silverlight form the below mentioned link and check if you're able to install Silverlight on the system.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Preview does predict no change AFTER EFFECTS 2015

  So don't know if it is just me or the effects after this bagudo 2015... Projects heavier when I change something in the scenario doesn't change the preview... Even cleaning the Purge continues buggy was the only solution I found was to close and open the project again, after some time, he returns the bug

  The problem with the preview image is not updated after the cancellation was a bug introduced in the 13.6 update after effects CC 2015 and fixed the 13.6.1 bug - fix patch.

  ml http://blogs.adobe.com/AfterEffects/2015/12/After-Effects-CC-2015-13-6-1-Bug-Fix-Update.HT

• Any suggestions for prelude CC 2015.3 gel ingest?

  Hi, prelude CC 2015.3 running on Windows 7 and it freezes when I double click to ingest or select file - interfere in the menus. I work with a project that I have already ingested files.  Therefore ingest worked in CC 2015.3 and then stopped working at some point.  The border around the Panel darkens, but no record opens to select the files.  Clicking anywhere leads to the ringtone and no response from the user interface, but the window never shows "(ne répond pas) ' by pressing the 'Esc' key returns the border around the Panel."  The same machine also has the prelude CS6 installed and Import works with CS6.  Thank you!

  Hi Mayjain, remove the folder AppData solved the problem.  Thank you!

• in my HPI 6s more, description of the year calendar as "2558 BE." How can I change to 2015 or 2016?

  in my HPI 6s more, description of the year calendar as "2558 BE."

  How can I change to be 2015 or 2016?

  Two things to check:

  1 settings - general - language and region - calendar - Gregorian

  2 settings - general - Date and time - automatically - set rocking on IT

  (1095)

• Login screen of change in the Sierra

  I wish to have an image that is displayed when the connection. How can I do that. Photo of connection used to be located in the Caches folder but no more.

  Please do not suggest changing the wallpaper in the system preferences is not what I am referring is login screen image that I would like to replace.

  Any help appreciated.

  My image of login is in the folder Macintosh HD/Library/Caches, as it has always been.

  Check again.

• Error 1026 "VI reference is invalid" after the upgrade from 2015 to 2016 LabVIEW LabVIEW

  I just upgrade to LabVIEW LabVIEW 2015 2016 and met a "1026 error".

  Main program calls a VI sub that contains a server VI reference "VI this" connected to a Refnum output on the pane. The Refnum of the output of the Sub that VI is then used to get the 'name of vi", which is used as an input in the node"Reference VI"open. The program works very well in 2015 from LabVIEW.

  For some reason, in labVIEW 2016, the Refnum of the Sub output Vi returns a "step A Refnum", when it is used to get the name of 'Vi', issuing an "error 1026". On the other hand, if I open the sub first Vi (therefore in the meory), then run my main program, it works fine.

  Can someone explain what has changed between LabVIEW 2015 and 2016 that can lead to this issue.

  Thank you.

  Ian

  This code will result in the sub VI being released in ' reference to ' instead of having to use the server reference VI as an input for the property node. You can simply delete the VSR to reference to.

  

  See you soon!

  Ryan

• I have a great suggestion for Microsoft

  Original title: i have better thinking

  Microsoft allow remote microphone or electronic things put your finger and the copy or file and stick again PC delete or move new PC windows touch? I'm not Steve Jones but well guess and do new imagine with the thought of the best chance for Microsoft?!

  Hello

  If you want to suggest changes in the design here is the link, you can refer to:

  Microsoft Connect - back products and bug reports
  https://connect.Microsoft.com/dashboard/Info/

  I also suggest you to follow the link and check.

  http://Windows.Microsoft.com/en-us/Windows/explore/touch

  http://Windows.Microsoft.com/en-us/Windows7/whats-the-Microsoft-Touch-Pack-for-Windows-7

• Suggestion for setting up a good secured router including wireless routers

  I've owned three routers LinkSys Wireless since May 2007: two WRT54G (V6 and V8) and my current V1 E3000.  All provided configuration options that can do if it is very difficult, if not impossible, for unauthorized access to my WiFi routers.

  All changes must then your system is connected to one of the router's Ethernet ports and not through WiFi due to the modification point #3 of "General Suggestions.

  All the elements in square brackets by "<>" are the titles of LinkSys Admin web pages or sections of web pages.  Don't forget to click "Save Settings" on a single web page before you go to another web page or your changes will be lost.

  Please note that not all pages of the LinkSys Router Web Admin can use the titles of Section-page/website such as used in this suggestion.

  Make sure you know MAC address and physics of your wireless adapter so that it will be necessary for the point #3 «Proposals WiFi»  Assuming that you have a Microsoft Windows-based system, use a 'Command Prompt' to issue command ' ipconfig/all' to determine the MAC address (aka physical) of your adapter WiFi wireless connected to a router.

  After all the suggested changes, repeat the process to ensure that the changes have been saved.

  GENERALS.

  (1) < administration/mgmt=""> change the Admin password to one of your choice.

  (2) access to disable HTTP and HTTPS allow access.  After that it changed was recorded, you must reconnect to the router via note https://192.168.1.1 URL using httpS or http (without S) for a secure connection to the router admin web pages.

  (3) in Wireless disable access to the Admin web pages.  Must use the Ethernet port on the router.

  (4) in disable remote management AND disable UPnP - UPnP (a well-known Protocol should can route diversion if enabled).

  Specific suggestions of WiFi.

  (1) in turn off the SSID broadcast.  This will prevent the intruders 'driveby' to see the SSID of LinkSys Router.  Make sure that change you the default SSID of your choice.

  (2) in set your security level to the WPA or WPA2 (preferred WPA2).  Do NOT use WEP because it's encryption algorithm can be cracked in less than 5 seconds.  This will protect your transmissions between your system and the router.  The E series routers are supported both WPA/WPA2 depending on the client configuration.  My WRT54G routers would support only WPA or WPA2.

  (3.) in Select AES, TKIP not as security consultants have recently discovered a flaw in TKIP encryption crackable.

  4.) Select a passphrase that you and systems all allowed must be used to secure your router connections.

  (5) in the enable filtering MAC and "Allow only PC" whose MAC addresses are defined in the .  Both of these changes will require that you register addresses MAC and physical of all wireless clients that allow you to connect to your network router.  Failure to record the physical address/MAC system will refuse this system to access your network, even if they have the correct passphrase AES and SSID.

  1. disable the SSID broadcast is useless. Any Drivede will detect always immediately the access point because it should send signals of tag.

  It is trivial to force a wireless client to reveal the SSID. Thus, any hacker will be able to learn the SSID almost immediately after it has detected the presence of your router.

  In addition, to disable the SSID broadcast causes known problems of connection/reconnection with several wireless devices.

  In addition, broadcast disable SSID drains the batteries in your wireless devices as they have to actively seek a connection to your SSID to know whether here or now.

  As long as your wireless device is not connected to a wireless network, it will be continues to try to connect to your SSID at regular intervals. For example, if you have your iPhone set up to connect to your home network and you pull out your iPhone permanently tries to connect to your SSID, transmitting the requests of the association on a regular basis, actually bloating on your "hidden SSID' to anyone.

  As transmitting something takes a lot more power then passively scanning and tuned radio waves, it drains the battery. If you need good battery life with your ever wireless devices connect them to a network with SSID broadcast disabled, or make sure that the device does not automatically connect to it!

  Never disable the SSID broadcast, especially not for security reasons, because they do not offer any added safety or an advantage.

  2. the MAC address filtering does nothing more. MAC addresses are always in the unencrypted part of wireless packet. Any attacker will immediately learn the MAC addresses of your wireless devices. It is absolutely useless in the means of security and cause problems as the best for you. Do not bother about the filtering of MAC addresses. It does not prevent attacks on your network as it is easily circumvented.

  Use WPA2 with AES and a password strong. That's all that is necessary to protect your wireless network.

  The rest is a joke for any aggressor and bothers you much more than the alleged assailant. If an attacker was able to decipher your network WPA2/AES the SSID of your network and MAC addresses are a free byproduct you will get during the cracking process...

• I need to change a password, someone sends me emails with viagra adds. Even when I send e-mail there viagra mail attached to it

  my e [mail is to have a viagra add attached to it and now someone sends e-mails in my name with this viagra even add, and I have not had my computer, so I guess I need to know how to change my password for my computer it's been hijacked somehow... people care about me]

  Hi pdkbingo,

  It is more than likely that your email account which is at fault and not on your PC. It is quite easy to 'spoof' an email so it seems that if it came from your email address when, in reality, it comes from someone else. I suggest change you your email provider, so changing your email address. If you are using groups of public discussion, facebook, twitter "are not" visualize your email address. Unscrupulous people help software 'bots' trawl newsgroups etc. for email addresses. It's a way to get loads of spam. If you post an email address in a newsgroup etc. then type something like * address email is removed from the privacy *. Of course, you will need to enter your 'real' email address when registering for the discussion groups, facebook, twitter etc but if your email address is not visible there cannot be "hijacked" as you say.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Windows 7 will not shut down or restart my computer. I tried all of the suggestions I've seen previously displayed.

  My computer shuts down fine with Vista (64-bit), but not with Windows 7 (Home Ultimate, 64-bit).  It disconnects me and shows the "Stop" screen, access the drive hard as if he does something, but never closes my computer (or monitor) off the coast.  It's the same thing when I'm saying Windows restart my computer.  I always hold the power button to turn off.  Occasionally, the next time I start up, I get a message saying that the computer has been shut down unexpectly, but usually not.  Although I don't think that this issue is damaging physically my computer, it is still an annoying problem.

  So far I have tried:

  -Modification of the settings in my BIOS ACPI.  I don't have the ability to toggle ACPI, only to change between 1 & 3.  I tried them both.

  -Method of "Clean boot" Troubleshooting Microsoft.  Even with all non-essential services and startup items disabled, I always have this problem.

  -Disable Windows Fax.  Only one had this problem, and so I thought I would give it a shot.  Not good.

  -Another forum suggested turning off the M-Audio card.  Tasted it.

  -Yet another forum suggested changing "power settings" in the device to the IEEE Bus controller Manager 1394, allowing the computer stop the computer, or something in this sense.  I see no option anywhere to change the power settings.

  Suggestions of new, I can add to the list?

  After reading a lot on the forums and tried almost everything, patches, disabeling energy efficient features on IEEE 1394 and usb. He hit me, everything indicates that the acpi on the motherboard and the table mps. Changing from 1.4 to 1.1 in the bios MPS table solves the problem and win 7 shutsdown correctly

  ET1

• Problems with getting an interactive E-book created in ID CS6 to work with ID CC 2015

  Hi all

  I have a problem with an e-book that I created with Indesign CS6.  He has slideshows, blocks of video image, zoomable and scrolling text boxes between assets. It was never published but was over and I was able to do work through the constructor app let me see on Viewer Adobe on my Ipad. Here, everything works perfectly. Since then, I changed cs6 to 2015 for CC and now I have problems.

  I wan't to make some corrections to the origianl design and content and publish correctly. When I open the various documents that the book consists of (a document PR. Chapter of the book) it is no longer the option to create the app that I used in the old CS6. When I export a chapter the ibooks app opens and opens the chapter, well but some interactive things do not work: my slide show does not automatically change the slide it's supposed to, I also have a zoom in the window of a drawing I did and all the boxes scrolling with text and drawings do not work either. Video clips to work however. When I check the slide show options in the document, they seem to look ok. Now my questions are:

  How do these things work?

  What is the difference in the CS6 and CC 2015?

  Can someone direct me to some tutorials that can help me solve the problem?

  I really hope someone can help I would like to finish my project I've been working on for a long time...

  Thanks in advance

  Berit

  This isn't an EPUB, it's a DPS folio. Some of the effects of work, some do not, but the overlays Panel won't be any help.

  You can add scrolling images with this: universal scrolling frames | Ajar Productions

  Pan and zoom is not supported and are neither self running slideshows. If you can give us more details, perhaps alternatives can be provided but be very specific as to how you plan on the publication of this.

• Definition of the surface of the mushroom side in FrameMaker 2015

  The properties of the object dialog box has changed significantly in 2015 from FrameMaker. It seems that you must specify the heads side through the designer of model object and then assign this style for the text block.  Is this true?

  So I set the heads side using graphics > designer object model. I selected my head sideways style in the object's properties dialog box, and click Save. The heads side have not been added. Nothing has changed on the page.

  Does anyone know how to add the heads side in 2015 from FrameMaker?

  Same as always:

  (1) format > Page layout > column layout...

  2) click the box of the room to the heads side at the top left and fill in the desired properties of width, Gap and side

  3) click update all of the flow

  
  

  
  

  It is an entire document, stream property, so you shouldn't really go through the object Designer.

• Como reparar el error 0xc00001d en start December 2015?

  Hola a todos, con nueva change first Pro 2015 are no puedo entrar al programa, igual as el after effects y el Photoshop or even instala addition nueva (as bueno porque if no tambien no tendría acceso).

  DD sabe como el error 0xc00001d did? I have a AMD y parece esta tiene problemas con este procesador, thank responses change as, saludos!

  

  Hi Antonio,.

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Premiere Pro CC 2015 opacity masks have no effect

  I can't really the word to that very well, but any help would be awesome, I recently made some changes in cc 2015 and enjoyed using the new opacity masks that took place, unfortunately, after saving my work and close, then reopen later, none of the masks work.

  All keyframes are still on their schedule, but the masks are seen no effect on images, I tried to move the images to another sequence as well as to check if it was just a mistake in the... Preview window that has not been exported.

  Although this isn't a large amount of work and it is only recreational I put a little time and want to be able to solve this problem in the future.

  Thanks for any help you can give.

  Last idea: turn off equipment MPE.