Support contact problem

Similar Questions

• How to remove the support contact at screenshot using the "home" button

  guys, please help, how to remove the support contact at screenshot using the "home" button? I use 6 s ios 9.2, but when I take screenshot with the menu help key, the help key disappear on my photo, but the problem is, I want to take screenshot with my home button, please help... Thank you

  What turned the problem into a screen with the home button? Quickly, you press the power off button and home together and release - if the sounds are enabled - you should hear the camera shutter sound and have the capture in your app screen shots. The help key is not displayed

• Error 500 CTS Cisco ' remote site is not supported contact your technical support.

  Hi guys, I installed 2 Cisco 500 CTS with Cisco CM 7.1.3

  I've updated the CTS 500 version 1.6.7 and I could add to the Director and I have followed all the configuration mentioned in Configuration Cisco Telepresence with Call Manager.

  I also configured the Midlet services and everything seems to work very well.

  The problem is when I'm doing a call between the 2,500 CTS, I'm getting on the screen the below error:

  "Remote site is not supported contact your technical support.

  Knowing that the two CTS have the same version and two of them are registered correctly and no problem is show.

  Can someone help me how I can check where I get this error?

  Thank you

  Seems to be a problem of config CUCM

  Check box and the location make sure you allow enough for a video telepresence call P.C.

• IAM making purchase I get the message (to the iTunes support contact support) what I need to do

  IAM making the purchase of a war of nations game, I get a message (to the iTunes support contact support) what I need to do

  You can contact the support of iTunes for assistance.

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• On page 7 Microsoft upgrade (online), when I entered the product key, it also showed not supported & contact support technique microsoft

  Original title: Window 7

  I bought WINDOWS 7 Professional in 2011 & upgraded to the WINDOWS 8 Pro in 2012. For some reason, recently I formatted laptop. I have the product key, but do not have the installation CD.

  On page 7 microsoft upgrade (online), when I entered the product key, it also showed not supported & contact support technique microsoft.

  PL. help me for the installation.

  Try the 8 key for download,

  https://www.Microsoft.com/en-us/software-download/home

• Add contact problem after update of iOS to 9.3.2

  Hello

  I'm having a problem with my iPhone 5 after the last update. When I touch the icon 'more' in contacts to ad a new the contacts app one breaks down (disappears) and I see my home screen. The same phenomenon occurs when I try to put a number on the keyboard then hit add to the left of the number. I couldn't find any workaround to add a contact.

  Everyone knows about this problem? Any known fix?

  Thank you very much in advance,

  Adam

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• Bought 305 U.S. number does not and none support contact info...

  How to keep someone at Skype...

  A few days ago, I bought a number with the area code 305 of the United States, but when I called to check I don't hear a voice saying: is not in service. If they can't make it work how cvan I get hold of someone at their support?

  Contact customer service

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Request (invalid_request) of error _ __Your other could not be treated. __This could be caused by a misconfiguration or possibly a bad query is formed. For-profit support, contact network support team. __

  When you invite someone to a game of this error:

  Request error (invalid_request)

  Your request could not be processed.

  This could be caused by a misconfiguration or possibly a bad query is formed.

  For assistance, contact your network support team.

  Hi Paolombana,

  ·         Which game you try to play?

  ·         Do you get this error message when you try to invite a particular contact?

  ·         What operating system is installed on your computer?

  Method 1

  If you are using Windows Vista, you can self test network diagnostic tool and see if that fixes the problem.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2

  If you use Windows 7, run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• plugged in, not not supported (Vista problem?)

  My laptop battery gauge continually reads "plugged in, not charging" in the system tray and does not load.

  I tried a number of supposed bugs and none worked including:
  -cleaning of the ports and pins
  -change the battery,
  -change the PSU
  -flashing the bios
  -updated all the drivers
  -type the laptop near the inspiron logo
  -a series of variations on removing the battery stop and restart with the battery inside or outside etc.

  I can get very rarely my battery charge by unplugging and plugging it to my AC adapter. Sometimes after 20-30 minutes to unplug the unit and plug the adapter it suddenly starts to load.

  Note: whenever I disconnect and reconnect the adapter of the intensity of the screen reduced to reflect the power battery and returns plan then to the brighter when I plug in the adapter. which leads to suspect that the laptop is pull on the adapter sector very well.

  Read about various support forums, it seems, it is a problem intermittent for almost all brands and models of laptop owners who all have one thing in common: Vista o/s.

  Therefore, the most likely reason for this problem seems to be a bug not diagnosed in Vista.

  I have run that Visa ultimate 32 bit on a Dell Inspiron 1525.

  I am looking for help on this problem.

  Hello

  How old is the battery and how much use has seen it? It really sounds like a hardware problem so contact
  Dell - perhaps a known issue and also check their forums.

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  ==========================================

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this if your battery has thin slots just clean the knife edges that fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the manufacturer of the system's support, and many have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version
  http://osirisdevelopment.com/BatteryBar/index.html

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• "Home" button doesn't work is not even with the support contact

  H

  Hello to you all.

  I seem to have a problem with my iPhone 5 now. Notifications are not appearing (stills phone vibrate, silent or not), siro does not work (but again, vibration works as if everything was fine.) and by simple click home button does not work, both manually and with a help key. Double-click on works fine, triple clicking too. I tried calibration "home" button but it does not work, and since he made double and triple click, I don't think it's broken. The thing is, even touch home on assistove does nothing. Please help me find a solution thanks!

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If restarting the force cannot be done because the home button does not react, set it back to factory settings, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Permissions contacts problems

  Hi guys,.

  I've been putting upward with it for some time, but as a result of not being able to remedy, I am tender hand to the community.

  After El Capitan have reinstalled several times, I get the same problem again and again in the 2 accounts, that I have the installer on my iMac - I am unable to make any changes to my Contacts. When I try to insert a new contact, change an address, add a phone number or e-mail to an existing contact, etc., he seems to accept that the window is open, and then when I quit the app and reopen to check, the news update is missing. Same thing happens if I try to change the domain names (ie: 'home' to 'John' for example).

  I can add / edit on my iPhone (6 - last IOS), but even if the two devices are connected to iCloud on the same account, the iMac is not up-to-date.

  The problem seems to be that the Contacts app itself on the iMac has locked me (& account iCloud?) outside.

  

  If I try to change the permissions, I can unlock the padlock of apps, but as soon as I try to make changes I get...

  

  • I am an administrator of two accounts: Yes
  • I tried repair permissions - does not apply in El Capitan (as far as I understand), but I have tried using the function of first aid in disk utility and executed orders f the fsck on startup
  • I tried to reinstall the OS - Yes twice with the same results
  • I tried resign snap on behalf of iCloud - Yes.
  • It works on a new account administrator - no, same problems.

  That's all that I've tried so far, so if someone has something more that I need to try, I'd be happy to give it a go.

  Thank you

  Anyone experienced this problem?

  I'll drop the post - need to get this resolved, as I reloaded the OS and still have the same problem!

  Thanks for help of nay that anyone might be able to provide.

• Pavilion A7F22AV: HP Support Assistant problem

  I download the latest version of HP Support Assistant. This is the version 8.1.52.1. For unknown reasons, a yellow exclamation point is on the question mark icon blue HP Support Assistant updates the day I planned the HP and messages. I know from experience after which means I have to open HP Support Assistant and decide on something. I watch the action log and messages and there is nothing to comment on, and I see no update has been done.   The only way I can get rid of exclamation point on the icon question mark HP Support Assistant is to RESTART my computer. What is causing the exclamation on the HP Support Assistant icon?

  Drumman2, welcome to the forum.

  If you have enabled for Messages and updates and there is nothing available, I suggest you uninstall HPSA and install the version appropriate for your computer from here.  It is possible that a problem has occurred when you installed it.  I've seen this kind of problem before.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite A200 PSAE3C - Flashcards support utility problem

  Hello
  I use the psae3c-ft108c Toshiba Satellite A200 model I purchased in the Canada. I m problem with Toshiba flash cards support utility.

  I formatted my laptop (vista home premium) and installed vista Ultimate edition a few days ago. I installed all the drivers, I had no problem until I installed comodo firewall pro (I don't know this comodo firewall causing the problem until I did research on the internet).
  After installing comodo firewall the FN key does not work and started to crash and he showed me a blue screen. I have restarted my laptop and tried the FN key, but it shows the blue screen still :(

  So I uninstalled the extra package of flash support utility and value cards and I tried to reinstall the flash cards support utility, but he continues to shows me the message that says "the product [2] is already installed, preventing the installation of this product. The two products are incompatible"value-added packaged installs well but since flash cards support utility will not be installed, I can't use the FN keys with keyboards... (I can use flash with mouse however cards)

  I uninstalled comodo firewall and tried to install the flash utility maps, but it does not work either...

  I don't know what to do... Please help me

  p.s
  Sorry for my messy :(writing I m an international student.

  I always use the freeware CCLeaner. It cleans the keys to registry and file systems, etc.
  I always use it after that a piece of software has been removed from the system.

  So you should this; After PPV was removed, allows to run the CCLeaner and before you install the new VAP to restart the laptop!

• HP Support Assistant - problem with shortcut

  I have the problem with the HP Support Assistant, when I open the shortcut on the desktop, I get the error: "the element 'HPSF.exe' that this shortcut refers has been changed or moved, and this shortcut no longer works correctly. You really want to remove this shortcut? »

  I'm tempted to open it from the beginning, the same thing happens. I don't know what happened with the HP support assistant and with the shortcut. I am not be reinstalled HPSA. I did nothing, I don't know how it happened.

  Do I have to reinstall HP Support Assistant or can I fix? What should I do to fix this?

  I'm using Windows 7 Ultimate 64 bit.

  Hi Licpa,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop and have the HP Support Assistant with questions. Here is a link to uninstall the HP Support Assistant software. You can reinstall it here.

  I hope this helps.

  Thank you.