Support for using postgresql since blackberry application

Similar Questions

• MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

  MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

  Read this: upgrade Windows 10 Dell Latitude D610

  Take a look at my answer, complete instructions.

  Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

  However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

  If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

• Support for multiple versions of an application

  Hello

  If I have an application that has complained about the os 5.0, but uses of the Mineral which are not available on os4.7. Can I change the code base is compatible 4.7. But the app to 4.7 compliance of refactoring removes some of the features of version 5.0. Do I have to release multiple versions of the same application on the app store, for each version of the application is supported by a particular operating system version?

  Thanks for any help

  Details of penetration OS here:

  http://us.BlackBerry.com/developers/choosingtargetos.jsp

• Cisco support for third party on SRE applications?

  Hi - I think about some applications of unified communications to third parties under VMWare ESXi5 running on a Cisco SRE 900 module.   According to the docs Cisco, 3rd party apps are supported on these modules (see table below), but the app in question is NOT on the list of Cisco below.

  http://www.Cisco.com/en/us/prod/collateral/modules/ps10598/data_sheet_c78-553913.html

  A few questions:

  1. until the third-party application is able to run under VMWare/VSphere ESXi5, is there anything on the SRE which could prevent you from running this third-party application even if it is not on the list of Cisco?

  2. What is the policy on the use of third-party applications that are not on their list of Cisco?    For example, they will be a call for support on the SRE running an unlisted application (I do not expect to help me with the app, but I don't want to cancel any kind of support contract through the use of a third-party application not on their list).

  Thank you!

  As long as 3rd party soft is able to run on ESXi 5 he would go on the SRE material. Cisco does not prevent these applications from running even if they are competitive. Support perspective that Cisco TAC will not take any support calls for these applications nor would know how to redirect the call to these 3rd party partners. Cisco TAC supports only SRE and ESXi related issues.

• Add support for the iPhone in an application already published

  Hello

  Is it possible to add support for the iPhone to a multi-folio application which we have already published in iPad format.

  If so, what are the steps before you download a .ipa file revised to Apple for review?

  There are a few paragraphs on the update of the application in general on p58 here but nothing specific to add support for additional platforms to an existing application.

  Thanks in advance for your help.

  Ross

  You must do two things to make your application work on the iPad and the iPhone:

  1. create fact sheets for the iPhone.

  http://help.Adobe.com/en_US/digitalpubsuite/using/WS4cb2576c7954973c-70d16164136e6c7cfbc-8 000. HTML

  2. create and submit a new version of the viewer using DPS App Builder. Select iPhone and iPad. Use the same files mobileprovision and CERT.

  You also need to create some application icons and splash for iPhone screens.

• Support for Linux in Smartphones blackBerry - marketing Dept.

  Sale of RIM rose by 102% to $1.88 billion for the quarter ending March 1 08. What are the chances of RIM having sufficient funds or will support, customers using Linux? A community which grew to 1.37% in September 2007 to 2.09% in October 2008.

  PS Ubuntu Linux: 8 million users and more

  It is not really answering your question to the Marketing Department, I don't even know if they read this forum. They could.

  Have you looked here for Linux support?

  http://www.BlackBerryForums.com/Linux-users-corner/

• RIM provides support for developers to transfer their applications pre - BB7 BB7 all devices

  Hello

  I found that many apps are not taken in charge on BB7 and specifically all devices BB7 (all Touch 9860 is a good example).

  I was wondering if RIM has support specifically for all applications to the latest version of their OS?

  Thank you

  gajariam

  Signature for BBOS keys have not changed.  I use the same signature keys for 7 BONES I had OS 3.7 (yes I go too far back...).  So it's one excuse for not doing anything, not a reason for not supporting the 7 OS.

  The preferred for OS 7 development environment is Eclipse, which is the same as that used for Android.  If it's not really wash with me:

  "It does not help that the development environment and tools for the BlackBerry operating system legacy are spectacularly horrible"

  For the reasons that the developer of mango does no development work on BB goes down:

  (1) 99% of the population using the app run on Android

  (2) RIM give up the BlackBerry 10 platform.

  Any of these are 7 specific OS.

• RX-10 Raw files is not supported for use in Aperture Mac

  Just buy a RX - 10 cybershot camera and I would use my Mac opening to deal with Sony Raw file formats photo editing program.  Sony raw files are a Mac "Unsupported Image Format".  My understanding of the Mac user forums is the manufacturer (Sony in this case) to provide apparently updated coding to Apple so that they can incorporate into the product periodic firmware versions.  If it is incorrect, I would like to hear from someone at Sony.  If not, is there a workaround solution that someone knows?  Thank you very much.

  The last Digital Camera RAW compatibility update does not yet include the DSC-RX10. You can install Image Data Converter on your Mac as an alternative. Click here for more information.

  If my post answered your question, please mark it as "accept as a Solution.

• my flash builder shows no option for the ios and blackberry application

  

  I can't read this info on my installation of FB, although installation details gives the version numbers for various components (on Flash Builder - press installation details), but if you go here: http://www.adobe.com/support/flex/downloads_updaters.html#flex4_5 you can find the 4.5.1 update that you have installed.

• Is it possible to know the service provider of the user to use in my blackberry application.

  Hi all

  I have a requirement in my applocation to know the user's service provider (such as Airtel, idea, DOCOMO,... etc.).

  Is it possible to get the service provider of the user in the blackberry app.

  Please help me with this...

  Thank you & best regards

  ---------------------------

  Ravikumar Chinatada

  See RadioInfo.getCurrentNetworkName ().

  Scott

• application of newsstand, iOS add support for .folio files

  Hello!

  We have a kiosk iOS application to provide our customers with our problems, and we use a PDF reader.

  We want to add support for the .folio in the application files, by using a reader of folio in our application.

  Looking around, I only found the specifications for the .folio files and Adobe Content Viewer application.

  Is it possible to have more specific information on how we can do something like the Adobe Content Viewer application that we can integrate into our application?

  For example how could analyze the xml files, which controls views to use (for example. UIWebview?) etc.

  Thank you very much!

  It is really not possible to do. Keep in mind Adobe has devoted a team of engineers over the last three years to build the folio of the rendering of the DPS Viewer capabilities. Write one yourself to integrate into an existing application, it's only really only something a big company with their own market will do.

  If your application currently does that distribute magazines, it is best to spend to DPS and replacement of your existing application with a DPS one.

  Neil

• Waterfalls package Blackberry application

  Hi all

  So far, I used to install blackberry application QNX momentics.

  I connected the device to the computer, created a token of debugging using QNX and installed the application.

  But is it possible that, without connecting the device to the computer I have export the application as an auto executable and send it to somone else anyone can install on blackberry without my help.

  Please suggest

  For example, see this tutorial on YouTube of BlackBerryDev chain:

  https://www.YouTube.com/watch?v=Szd_s_UBifM

• Why are there still no support for Samsung NX1 and NX500 RAW

  I wonder that there is still no support for these formats, since both devices are very popular now and it requires already open since OS X Yosemite ist.

  It's a bad experience that I'm not able to access my photos without expensive professional software.

  GraphicConverter 9 both affinity open Photo them. $39.95 and $49.99, respectively. Not what I would call cheap but it's relative.

• Disks supported for local data banks?

  Hello

  What kind of discs are supported for local data stores that is IDE, SATA, SCSI, SAS...

  Ide drives is not supported for use how VMFS.

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• Provide technical support paid to the developer of applications for BlackBerry BlackBerry?

  Provide technical support paid to the developer of applications for BlackBerry BlackBerry?

  Please guide me if BB provides this support for developers.

  Thank you

  The technical forums offer almost everything you need. There are BB monitor and help people on various forums. It really takes that you had to pay someone, if support is free.