support for vSphere on Windows 2008 R2

Similar Questions

• VCenter 4.1 update - support for 64 bit Windows 2008 R2

  Hi, I was wondering if VCenter 4.1 supports Windows 2008 R2 64-bit?  OR if it supports up to Windows 2008 64-bit (Service Pack 2)?

  Noticed a large number of entries of knowledge, but many of them are former comments so just look for the current level of support.

  Thank you

  HCC says:

  My SQL Server 2005 is external and I executed the script to check the inconsistencies and that returned nothing, so I guess I can just run the datamigration for backup tool and install the VCenter on the new hardware.

  There is no need to run the data migration tool.  You connect to an external DB, that identify only in your installation.  The schema will be upgraded and your inventory will be back as usual.  Just make sure you have a full backup.

• What file is required for startup of windows 2008?

  I want to know what file is required for startup of windows 2008

  like windows xp needs ntldr.sys/ntdetect.com...etc

  Sunil

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:
  TechNet forums

• Need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server

  I need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server.  The pilot to feel that you get when download you from hp.com are for XP and Vista Window7.  The error message says I have to update my Windows 2008 Server R2 to XP, Windows7 and Vista to install drivers.  I called HP and have a case number.  All I want is a link to the REAL Windows 2008 Server R2 Enterprise OfficeJet 7610 Print Drviers in x 86 and x 64 bit versions.  Is there someone who can help?

  Hi Print_Madman! : you might have more luck going Buisiness & reierate Forum this question out there

  He is the owner of the House section

  Good luck

  hope this helps you

  spacechild

• RHEL 7 will never be a platform support for vSphere SDK for Perl 5.5?

  RHEL 7 will never be a platform support for vSphere SDK for Perl 5.5?

  https://www.VMware.com/support/developer/viperltoolkit/viperl55/vsp55_vsperl_relnotes.html#supported

  
  

  Thank you
  

  We have recently updated the Perl SDK to 6.0 U2 which now supports RHEL 7.1, as seen in the vSphere SDK for Perl Release Notes

• Material for a few Windows 2008 SBS

  Hello!

  I planing building a server to host a few servers to Windows SBS 2008 and perhaps less certain resource hungry VMs, wich I will allow for some of my clients on my network.

  Each VM will have quite a few users, about 4 to 10 users per virtualized SBS 2008.

  The minimum requrement for a normal installation of sbs 2008 is a 64-bit CPU and 4 GB of ram.

  I wonder what kind of material I should look for, and if we run a similar crowd and can give me a few guidelines for material.

  How much ram and cpu required for leash rather have a host with 8 virtual machines running Windows 2008 Small Business Server

  Disk configuration and the e/s flow is going to be your biggest problem. Too bad you can't get the G6, I would even hold off and get a date, or import an If you must, but get a support package in place in case where if hardware problems. The G5 is old enough and a little more, you get much more for your money.

  Not played with Raid 10 really, would seek to Raid 1 for swap and log disks and Raid 5 for o/s and the data on the disks generally.

  The other problem with the G5 is that they provide 4 x 1 GB DIMMS, which are a disposable waste in a server with only 8 slots, the G6 gives you 18 slots in order to get more memory by buying more small bags...! 18 x 2 GB instead of 4 GB and a mixture more is possible...

  32 GB should do you find - you can see how the memory usage Gets and add virtual machines more later and keep an eye on things. I'm tempted to get a quad core now and add another later but closely related memory the CPU you get better ones optimized at the beginning...

  The G5 really limits your options of disc 8 disc, not bad for on all axes but it's SBS VMs not standard we are talking about. Another good reason to ask your dealer gets a G6 in pronto! You can get 300GB 2.5 "drives now for the G5, it's another option...? !

  Michael

• PDF IFilter support for 8.1 Windows and SQL Server 2014

  Hello

  We use Adobe PDF iFilter Version 64 11.0.01 (here: https://www.adobe.com/support/downloads/detail.jsp?ftpID=5542) full-text support for PDF files on SQL Server and Windows Server 2012 2012. This works also on Windows Server R2 from 2012 to 2014 of SQL-Server even if both is not listed in the list of the applications/OS supported. But it does not work for the combination of 8.1 to Windows and SQL-Server, 2014.

  Can anyone provide a solution to make it work for this combination, or know when it will be officially supported?

  Kind regards

  Stefan

  Hi stefankainz663,

  Please see this KB for the workaround iFilter PDF search doesn't work on Windows 8 x 64.

  Kind regards
  Nicos

• model of vSphere with windows 2008 R2 deployment

  Hi guys.

  I'm going around in circles at the moment.

  I will deploy windows 2008 R264-bitStandard. I have bought the relevant VL MAK and won't use KMS.

  So the questions I have are:

  When you create a model I should activate the model and deploy?

  As far as I know, this would lead to kick in the activation process.

  Should I deploy and activate?

  I was wondering if someone has managed to create a customization script to prevent the reactivation or automate?

  Thank you

  Dougie

  We do activation at the end for each computer virtual created from the template. keeps things simple for now.

• Vijava support for vsphere

  guys,

  Y at - it a new version of vijava for vsphere?  I am not in favour of HostPlugStoreTopology.

  stubs does not contain the com.vmware.ws.stub in viapiImpl.jar for HostPlugStoreTopology package.

  should I just generate it leave me the last WSDL?

  Thank you

  Vincent

  Unfortunately not.

  The vSphere SDK for Java tech preview version is for demo only at this stage.

  We changed the wsdl2java to generate a special version of stubs from wsdl, and you cannot generate by your own.

  But if you have a special requirement, please send me an email.

• How to reformat a media to a .wmv .mov file or any other file support for Director of windows

  I used a HD camcorder to film a project for a class and I need to make a film about the clips but the Director of windows does not support the .mov files that came off the camera sd card.

  Hi knight_12,

  Movie Maker is not .mov files-compatible. However, if you have a video file or audio that is not supported, you can use a video editing software not Microsoft to convert the file into a format supported by Windows Movie Maker.

  You must perform a search online for video conversion software to find one that fits your needs (check the file formats that are supported by Windows Movie Maker.

  Formats supported by Windows Movie Maker in Windows XP file

  Import the resulting audio or video file into Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.

  Import video, photos and audio on Windows Movie Maker

  IMPORTANT NOTE: Using third-party software can cause serious problems that may prevent your computer from starting properly or may lead to serious problems. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Hyperion Planning support for browsers and Windows

  Hello everyone

  I have a question about browsers and Windows that support Hyperion planning.

  Hyperion is compatible with Windows 10?

  Hyperion is compatible with IE 11?

  Hyperion is compatible with Firefox (latest version) 43

  SmartView is heading the bureau 13?
  

  
  

  Thanks in advance.

  
  

  Concerning

  MSA
  

  You will need to provide what version of Hyperion (and Smart View) you are on for people to answer this question precisely as each version is different.

  Your best bet (and should always be your first choice in these issues) is to consult the EPM support matrix

  http://www.Oracle.com/technetwork/middleware/bi-Foundation/Hyperion-supported-platforms-085957.html

• PowerVault MD3420 support for vSphere, Esxi 6.0 6.0?

  Hello

  We ordered 4 R730 servers "nine" with 12Gbps SAS and a SAN MD3420 cards. ESXi hosts are preinstalled with ESXi version 6.

  Once we have installed 40 VMs on that, we now see that after a reboot, the HBA does not detect the LUNS. Only after the adapter cables HBA and their reversal, it detects the. Also in the selection of the HBA path I see all the options like "round robin" etc.

  When I check the site of VMware, it looks all DELL powervault MD32xx/MD34xx without DOING to support ESXI 6.0, with the exception of the MD3420! I checked it before and are beginning to doubt myself / or if the compatibility on the Web site has changed.

  http://www.vmware.com/resources/compatibility/detail.php?deviceCategory=san&productid=36288&deviceCategory=san&details=1&partner=23&arrayTypes=4&isSVA=0&page=1&display_interval=10&sortColumn=Partner&sortOrder=Asc

  Is there a driver or updated to be less expected the first weeks, or should I start without downgrading all my VMs and esxi hosts to version 5.5? It's really a shortcoming that I think that the package came with preinstalled 6.0.

  Best regards

  Joris

  I found the solution by installing another driver in the list of lsi, and then disable the native driver.

  The appropriate driver is not in the image of DELL ESXi 6.0 A00.

  In short, all this on each host:

  [root@*:~] software esxcli vib install v - /vmfs/volumes/DS_SAN_DG2VD1/ISO/scsi-mpt3sas_10.00.00.00-1OEM.600.0.0.2494585.vib

  Result of the installation

  Message: The update completed successfully, but the system must be restarted for the changes to be effective.

  Restart required: true

  VIBs installed: Avago_bootbank_scsi - mpt3sas_10.00.00.00 - 1OEM.600.0.0.2494585

  VIBs deleted:

  VIBs ignored:

  set of module system esxcli [root@*:~]--enabled = false - module = lsi_msgpt3

• support for vSphere for Sandy Bridge processors

  Good afternoon

  Don't vSphere 5.0 supports Sandy Bridge processors 2nd generation? I mean specifically i7.

  Thank you in advance and best regards,

  Jan

  Although I'm sure that you'll be able to do work, I doubt you'll find supported in VMware HCL desktop processors

  André.

• Support for vSphere versions?  And rights of vCenter

  Is "vSphere 4.1 Update 1" supported by VCB 1.5 Update 2?

  And does not host ESX and vCenter needs to be at the same version and update?

  One last question (I think) - what rights should the user on the server "vCenter Server" VCB itself?  -J' I unuderstand what rights it needs in vCenter, but the quesiton is related to logging in the vCenter Server with a user name and password. Does just the possibility to connect in the vCenter Server, or does - she need the administrator rights on the server?

  Thank you!!

  Tom

  You can check everything in http://partnerweb.vmware.com/comp_guide/sim/interop_matrix.php

  You have vcenter administrator to perform backup, if you create the new user with the permission of the administration

  	Platform	VMware ESXi 5.0	VMware ESX/ESXi 4.1 U1	VMware ESX/ESXi 4.1	VMware ESX/ESXi 4.0 U3	VMware ESX/ESXi 4.0 U2	VMware ESX/ESXi 4.0 U1	VMware ESX/ESXi 4.0	VMware ESX/ESXi 3.5 U5	VMware ESX/ESXi 3.0.3 U1
  	VMware Consolidated Backup 1.5 U2
  	VMware Consolidated Backup 1.5 U1

  	Platform	VMware vCenter Server 5.0	VMware vCenter Server 4.1 U1	VMware vCenter Server 4.1	VMware vCenter Server 4.0 U3	VMware vCenter Server 4.0 U2	VMware vCenter Server 4.0 U1	VMware vCenter Server 4.0	VMware vCenter Server 2.5 U6
  	VMware Consolidated Backup 1.5 U2
  	VMware Consolidated Backup 1.5 U1

  Please, do not forget the points of call of the "useful" or "correct" answers     Mauro Bonder - moderator

• Where to contact the free technical support for improvements in Windows XP SP2

  I needed to re - install XP Home Edition SP2 and now I can not even Windows updates. I get the message: the site has encountered a problem and cannot display the page you are trying to view. I want a help please!

  You run this mode without failure? A large number of malware can hide if you do not have.