What file is required for startup of windows 2008?

Similar Questions

• What are the REQUIRED winxp startup programs?

  I want to remove more utilities not required for startup speed.

  You ask about the programs under the msconfig Startup tab?  Windows XP itself requires none.  Your application (especially antivirus and security) programs and devices could, however.

• What are the instructions for * installation * the Windows Service 'nativewifip '?

  What are the instructions for * installation * the Windows Service 'nativewifip '?
  Comments: The file "nwifi.sys" exists in the \windows\system32 directory, but the Windows Service does not exist and so must be "installed" (created). I understand that the command "sc" (service configuration) is probably the way to do it, but I do not know the correct settings for this particular Service. The nativewifip Windows Service is needed to support the Service of autoconfiguration WLAN according to the system of error events that occur when I try to start the autoconfiguration WLAN Service.

  Hey Timmy,

  I suggest you to report this issue in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• What are the requirement for the installation of TMS on VMware and a more stable version of the same thing

  Hi all

  What are the requirement for the installation of TMS on VMware.

  CPU, Windows 2008R2 and VMware platform. Please let me know the role of these servers

  You can see here the fact sheet VM:

  Virtualization Cisco TelePresence Management Suite

  More specific information such as the OS and versions can be found in the installation guides:

  TMS installation guides

• What are the requirements for vCenter Server 5?

  What are the requirements for vCenter Server 5?  Specifically, I'm looking at the vCenter Server Appliance but it is set to 8 GB of RAM.  I hope to run it on a lab at home that has only 8 GB etc. total RAM.

  The system requirements are here - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-installation-setup-guide.pdf

• What are the requirements for Dreamweaver?

  What are the requirements for Dreamweaver? The link is broken

  http://www.Adobe.com/products/Dreamweaver/tech-specs.html

  Works for me...

  Mylenium

• What is the plan for 64-bit Windows?

  The 11G Express Edition Beta installed without warnings or errors on a virtual machine in Windows 7 64 bit. However, after installation, the following error message appears more than once in the journal alerts:
  
  7451 REL in the load indicator: Error Code = OSD-04500: illegal option specified
  S/O-error: incorrect function (OS 1). !
  
  This error is repeated every 10 seconds in the journal alerts.
  
  I understand that this is probably because of the 64 bit OS. However, it is almost impossible to buy a Windows system today is not 64-bit. If the plan is to provide only 11 G Express Edition Beta 32-bit version for Windows, I think he should at least install and run in 32-bit mode on 64-bit Windows operating systems. Or is a 64-bit version for Windows in preparation?
  
  Thank you! It's great to see progress on 11 G Express!
  
  Published by: user468360 on April 13, 2011 12:08
  I've probably hidden my question with the alerts log error code. I changed the subject to my real question: what is the plan for 64-bit Windows?
  
  Given that almost all windows systems are moving quickly to 64-bit, 11 G Express will be available in a package (32-bit or 64-bit) that installs and runs correctly on a system with 64-bit windows? Should we report bugs related 64 bits seen with the 32-bit install package so they can be fixed or just a 64-bit package? Thank you!

  A version of 64 victory will come out with the production. We had to choose more platforms or to release the beta version faster.
  -kris

• Need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server

  I need print drivers for an OfficeJet 7610 for R2 in Windows 2008 Server.  The pilot to feel that you get when download you from hp.com are for XP and Vista Window7.  The error message says I have to update my Windows 2008 Server R2 to XP, Windows7 and Vista to install drivers.  I called HP and have a case number.  All I want is a link to the REAL Windows 2008 Server R2 Enterprise OfficeJet 7610 Print Drviers in x 86 and x 64 bit versions.  Is there someone who can help?

  Hi Print_Madman! : you might have more luck going Buisiness & reierate Forum this question out there

  He is the owner of the House section

  Good luck

  hope this helps you

  spacechild

• Are there special permissions (file access) required for reports write to temporary files?

  Report BUILDER 11.1.0.7 (64-bit)
  

  Form builder 11.1.2.1.0 (64-bit)
  

  Windows 7 Pro 64-bit

  Java:

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  IDAutomation LinearBarcode.jar

  
  

  I have a report that prints the data with bar code on the detail rows in a report.  It uses the Java LinearBarcode.jar by Idautomation package for this purpose.  The Java package contains an encoder that returns a bar code in the form of a GIF image to a field on the report.  One of the arguments that it requires is a name of temporary file generated by srw.create_temporary_filename ().  When it works perfectly, and it creates the temporary image file in my folder tree 'House' (C:\Users\ < username > \AppData\Local\Temp) run under the report generator.  When I run this report generator with fast running behind her I can watch the report search, open, read and close this file LinearBarcode.jar several times for successive lines of the report.  Everything seems to be very good in the generator.

  The fun begins when I try to call the same report from a FORM (Form Builder fleeing), where he fails every time, somewhere in the image generation stage.  In my view, that it fails to the creation of the image itself, when he tries to open the file for writing temporary image.  I can find the empty temporary files left after the report runs and fails, but the size of the file is zero byte.  When I run this report of my test form with Microsoft quick run behind it I see the report search, open, read and close this file LinearBarcode.jar for the first line of data in the report, then the report fails.  So, I know that the .jar file and the required REPORTS_CLASSPATH/CLASSPATH entries are synchronized with the location of the .jar file.  The report runs, and he finds the LinearBarcode.jar, it opens, it reads and closes it.  What I do is to not see any activity related to the image itself temporary file.   Thus, failure at least gives the impression of being in the image create step itself, which makes me doubt the safety of Java.  However, there is no message popup on Java security problems.

  I tried implementing Trace for reports, but also, that does not give something of use, except to confirm that the report is certainly a failure in the creation of barcode code somewhere.  This is known from the error message in the log file: fatal error REP-1401 < barcode create procedure name >

  I'm guessing that he might be a missing 'writing' somewhere authorization prevent the creation of the temporary file used to generate the barcode image file. This error only occurs under Java (run from a form). I was not able to find something about it by reading everything I could find on the OracleBarcode.jar demo.  I also not found anything in Google searches that does not count.

  Are special permissions to allow these operations to temporary file as shown above?  If Yes, where and how are they set?  If this isn't the case, else anyone seen this issue before?

  Thanks in advance

  Hank

  Resolved: This issue had nothing to do with the creation of barcodes. It turns out that there is a field in the State who had no defined source. It was not rendered because it was hidden by a format trigger. It seems that this case is handled by the constructor, but blew the engine in the reporting process used when a report is called by the forms. It took a long process of elimination, elimination of triggers, fields, parameters, and even the generation of bar code code until I found it.

  Thank you

  Hank

• What permissions are required for access to VMware Workstation?

  I need to provide access to a few virtual machines in our environment vSphere for a user through VMware Workstation 9.0.2 but questions.

  There are 3 virtual machines in a folder under models and virtual computers that this user needs access base (start, stop, console). I first tried assigning the role of user (sample) of the virtual machine to the user on the folder that contains these VMs (with spread), but trying to access one of them workstation as long as this user, I get the error was refused permission to perform this operation. I even tried to assign the role of administrator for this user on this issue and received the same error.

  Then, I assigned the user (sample) of the virtual machine and then later the role of the administrator directly to the virtual machines, but when you try to connect through my computer I get this error with or the other role (I have attached the log file, it refers):

  

  After clicking on OK, workstation breaks down, and then I get this error:

  

  The only way I could successfully get this user access is by adding the user to the local Administrators group vCenter Server, but after doing this, the user has full access to all virtual machines. I should also mention that Im able to access the virtual machine with the basic functions assigned via vSphere client to web without problem with permissions above affected as this user.

  Does anyone know what is required to provide access by workstation I'm looking for?

  Thank you!

  Figured it out!

  First, for each virtual machine that you want to grant access, to add the user/group with the assigned role, you want to give them. An additional step required for access to the workstation is, for each host you granted access to the virtual machines are on, you must also add the user/group and assign the read-only role, making sure to uncheck propagate to child objects.

  So it's similar to the thread above, but avoids having to explicitly revoke access to each another VM on the host. So now, when I log in as a user with that I was testing, I can connect to vCenter via my computer, only to see the VMs Ive applied custom roles to and, especially, can connect to them without problem!

  Also, it seems that even if work stations invite you to assign read-only permissions to the host is not actually do something.

  Thanks a bunch for all the help everyone... especially ShadyMalatawey. If I would not have seen this prompt in my computer to apply the permission he would have had much more time to understand.

• What are the requirements for the edition 720 p

  I saw the minimum requirements for a first installation, but HD needs more logicaly

  I have Premiere Pro CS3

  Windows 7 32 bit (I'll be switching to 64 bit as soon as I get the CD because I heard some of the design such as 3dsMax programs run faster on 64-bit system, I'm not sure Adobe)

  4 GB of RAM

  Intel Dual-Core processor with 2, 7GHz

  22 "monitor full HD so this matter

  Should I update something, because he's rowing still sorta and will it move faster on 64 bit Win 7?

  My 3 hard disks are configured as... (WD = Western Digital)

  1-320G WD Win7 Pro 64 bit and all program installs
  2 - 320G WD Win7 file and video project files
  3 - 1 t WD all video files... read and write files
  .
  Try to use only a hard for video editing
  .
  You are a conductor with a stick that you use to point to different parts of the Orchestra... it is like Windows pointing to different parts of the hard disk to clean Windows or load segments of emissions for various functions
  .
  Now, at the same time and with the same hand... while using the wand to direct the Orchestra... to take a bow and play a violin... it would do something with your video file at the same time as all other work
  .
  You as a person cannot do both at the same time with the same hand
  .
  A computer is a LITTLE better, because it allows to switch from one type of task to another very quickly, but not quickly enough for easy video editing
  .
  A hard drive is not as good as two which is not as good as three

• How to calculate what bandwidth is required for a site of Dataguard

  Hello
  
  We are running 11 g R2 RAC two nodes on windows 2008 R2 servers. We intend to build Dataguard site with the plug of the same or higher. For this reason, could someone please let me know that, how can I calculate the bandwidth required for site-based dataguard
  
  activity in our production environment? Is there any kind of method to help I can calculate the requirment of current bandwidth for my database of production in Mbps?
  
  Any help would be appreciated!

  Handle: 53637
  Status level: Rookie (25)
  Join date: June 26, 2003
  Messages total: 559
  Total issues: 61 (46 pending)
  Name shan
  Rental Australia
  Consultant Oracle occupation

  Also, try to close your message please

• Material for a few Windows 2008 SBS

  Hello!

  I planing building a server to host a few servers to Windows SBS 2008 and perhaps less certain resource hungry VMs, wich I will allow for some of my clients on my network.

  Each VM will have quite a few users, about 4 to 10 users per virtualized SBS 2008.

  The minimum requrement for a normal installation of sbs 2008 is a 64-bit CPU and 4 GB of ram.

  I wonder what kind of material I should look for, and if we run a similar crowd and can give me a few guidelines for material.

  How much ram and cpu required for leash rather have a host with 8 virtual machines running Windows 2008 Small Business Server

  Disk configuration and the e/s flow is going to be your biggest problem. Too bad you can't get the G6, I would even hold off and get a date, or import an If you must, but get a support package in place in case where if hardware problems. The G5 is old enough and a little more, you get much more for your money.

  Not played with Raid 10 really, would seek to Raid 1 for swap and log disks and Raid 5 for o/s and the data on the disks generally.

  The other problem with the G5 is that they provide 4 x 1 GB DIMMS, which are a disposable waste in a server with only 8 slots, the G6 gives you 18 slots in order to get more memory by buying more small bags...! 18 x 2 GB instead of 4 GB and a mixture more is possible...

  32 GB should do you find - you can see how the memory usage Gets and add virtual machines more later and keep an eye on things. I'm tempted to get a quad core now and add another later but closely related memory the CPU you get better ones optimized at the beginning...

  The G5 really limits your options of disc 8 disc, not bad for on all axes but it's SBS VMs not standard we are talking about. Another good reason to ask your dealer gets a G6 in pronto! You can get 300GB 2.5 "drives now for the G5, it's another option...? !

  Michael

• VCenter 4.1 update - support for 64 bit Windows 2008 R2

  Hi, I was wondering if VCenter 4.1 supports Windows 2008 R2 64-bit?  OR if it supports up to Windows 2008 64-bit (Service Pack 2)?

  Noticed a large number of entries of knowledge, but many of them are former comments so just look for the current level of support.

  Thank you

  HCC says:

  My SQL Server 2005 is external and I executed the script to check the inconsistencies and that returned nothing, so I guess I can just run the datamigration for backup tool and install the VCenter on the new hardware.

  There is no need to run the data migration tool.  You connect to an external DB, that identify only in your installation.  The schema will be upgraded and your inventory will be back as usual.  Just make sure you have a full backup.

• support for vSphere on Windows 2008 R2

  Hello

  We run VMware ESX 4.0.0 236512 and Windows 2008 R2 is still in the experimental. This is the case, or if I'm missing some updates?

  sunchk wrote:

  When I conenct to ESX host using the client, it is NOT listed as experimental. This means I have to only enhance VCenter to U1 right?

  fix. Upgrade your vCenter4 to U1 server and who can solve your problem.