Support for windows 64-bit & 64-bit Firefox developer 64 - bit edition version and

Similar Questions

• How to add support for Windows 7 64 bit id3v2.4

  ID3v2.4 support for windows 7 64 bit

  Hello

  I would like to ask if it is possible to add a support id3 - tag (version 2.4) to windows 7 Professional 64-bit.

  (and if so, how...)

  Thanks in advance

  Hello

  Explorer Windows and Windows Media Player can not handle ID3 version 2.4 tags in any version, until and including Windows 7/Windows Media Player 12. Windows can understand ID3 until and including version 2.3.

  For more details about tags ID3 in Windows 7refer for the links provided below:

  http://Windows.Microsoft.com/en-us/Windows7/media-information-in-Windows-Media-Player-frequently-asked-questions

  http://msdn.Microsoft.com/en-us/library/dd743220 (v = VS. 85) .aspx

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't download iTunes 12.3.2 for Windows (64-bit)

  Hi guys,.

  This is my case; -.

  (1) I have "Reset content and settings" my iphone 6 iOS 9.2.1, then tried to restore to my last backup in my Itunes.

  (2) after the reset, pluged into my laptop makes itunes error shown "cannot use this iphone because it requires a newer version of itunes."

  (3) check the update in my itunes it showed the latest version (12.1.2) while the site is 12.3.2 iTunes for Windows (64-bit), then I downloaded it.

  4) now after downloading and is ready to run, my illustrated window "this app can run on your pc. My OS is windows 10 pro 64-bit.

  (5) I met it could be due to my security software, I uninstalled it.

  (6) even *, I can't update.

  (7) try to repair the Apple Software Update but still pop error "path C;\users\kenvy\AppData\local\temp\ixp.tmp\AppleSoftwareUpdate.msi" was not found, make sure you have access to this location and try again or try to find the installation package "AppleSoftwareUpdate.msi' in a folder from which you can install the product Apple Software Update.

  can you help me, I need to restore my phone to the last backup I did.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• BlackBerry SDK for Windows 64-bit

  Good day everyone,

  Please any action kindly with a link to Blackberry SDK for Windows 64-bit. I tried a lot of things, but received no satisfactory answer. Please share with me the URL link.

  Thanks in advance.

  As far as I KNOW 64 but Java is not supported.  You will need to download the 32-bit version of Java.  If you really need the 64-bit for the treatment of the other then I think you can configure Eclipse to use a 32-bit version installed separately, but I suspect that will be easier remove the java 64-bit and 32-bit just run.

• You have Fire fox for windows 64-bit operating systems?

  Apparently, some downloads look for windows 64-bit browsers that it is load in the folder programs (x 86) 32-bit compatibility, could you guys create one that will load in the case of 64-bit? (e.g. explorer)

  Mozilla is working on a 64-bit version of Windows.

• Y at - it Oracle 11g for windows 64-bit XE?

  Hey, guys:
  
  I am a newbie to install Oracle. I need to install Oracle XE 11 g. I checked it on Oracle, only Oracle Database Express Edition 11 g Release 2 for windows x 32. My OS is Windows 7 64 bit. I am so worried if there are potential compatibility problems. There are Oracle XE 11 g for windows 64-bit (or is it important to work with OC4J 10 g oc4j_extended_101350 and APEX 4.1 earphone)? Whereas I have to install a listener OC4J and Oracle APEX. I am concerned about this compatibility issue more. (I installed OC4J 10 g (oc4j_extended_101350) and installed as a windows associated with the application javaservice service, he spent a lot of time to solve the problem of compatibility)
  
  Thank you very much!
  
  Sam

  This has been asked and answered several times in these forums - use the search function of pl - https://forums.oracle.com/forums/search.jspa?threadID=&q=XE+AND+64+AND+windows&objID=c18&dateRange=all&userID=&numResults=15&rankBy=10001

  HTH
  Srini

• Error - installation of Oracle EBS 12.1.1 for Windows (32 bit) on XP Prof SP3

  Can anyone help?
  
  I recently downloaded suite EBS worm Oracle delivery and Installation Express train:
  Oracle EBS 12.1.1 for Windows (32-bit); Release date: 12.1.1.0.0; Part number: B54471-04 Update: 14 / JAN/2010
  
  But the installation process stopped on step 2 of 5.
  (Status bar displays 20% and)
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd)
  
  Oracle quick Application installation wizard alerts:
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  Log file:
  (Location: D:\oracle\VIS\db\tech_st\11.1.0\log\appsutil\VIS_unit6253\02091538.log)
  
  Treatment DriverFile = C:\Stage12\startCD\Disk1\rapidwiz\template\adridb.drv
  The instantiation of the drivers for operation C:\Stage12\startCD\Disk1\rapidwiz\template\adridb.drv
  instantiate the file:
  Source: C:\Stage12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
  dest: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd
  backup: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd to D:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_unit6253\templbac\adrun11g1.cmd
  instantiate the file:
  Source: C:\Stage12\startCD\Disk1\rapidwiz\template\adrundb.cmd
  dest: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  backup: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd to D:\oracle\VIS\db\tech_st\11.1.0\appsutil\out\VIS_unit6253\templbac\adrundb1.cmd
  Step 0-5
  
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrun11g.cmd
  Step 1 of 5
  Step 1 of 5
  Command: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  Step 2 of 5
  Execution: D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM $Header: adrundb.cmd 120.12 marderiu noship 19/01/2009-06:29:56 $
  C:\Stage12\startCD\Disk1\rapidwiz > REM #.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM This file is automatically generated by the automatic configuration service. It will be read and
  C:\Stage12\startCD\Disk1\rapidwiz > REM crushed. If you have received the order to edit this file, or if you are not
  C:\Stage12\startCD\Disk1\rapidwiz > REM be able to use the settings created by the automatic configuration service, see Metalink Note
  C:\Stage12\startCD\Disk1\rapidwiz > 387859.1 REM for assistance.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > REM #.
  C:\Stage12\startCD\Disk1\rapidwiz > REM
  C:\Stage12\startCD\Disk1\rapidwiz > FOR /F "delims is" %a IN (' DATE/t') DO (set date = % a)
  C:\Stage12\startCD\Disk1\rapidwiz > (set date = 10/02/2010)
  C:\Stage12\startCD\Disk1\rapidwiz > FOR /F "delims is" %a IN (' TIME/t') DO (set time = % a)
  C:\Stage12\startCD\Disk1\rapidwiz > (set time = 11:15)
  C:\Stage12\startCD\Disk1\rapidwiz > INSTALLATION PHASE STARTED ECHO: DATABASE: 2010-02-10 11:15
  
  THE INSTALLATION PHASE BEGAN: THE DATABASE: 2010-02-10 11:15
  C:\Stage12\startCD\Disk1\rapidwiz > SET JRE_PATH=C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
  C:\Stage12\startCD\Disk1\rapidwiz > SET JRE_CP =. ; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
  C:\Stage12\startCD\Disk1\rapidwiz > SET XML_FILE=\admin\VIS_unit6253.xml
  C:\Stage12\startCD\Disk1\rapidwiz > SET XML_FILE=D:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_unit6253.xml
  
  C:\Stage12\startCD\Disk1\rapidwiz > SET PATH = C:\Stage12\startCD\Disk1\rapidwiz\unzip\NT; C:\V98\VC\bin; C:\Cygwin\bin; C:\Perl\site\bin; C:\Perl\bin; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\Program Files\Fichiers SharedCOM Shared\DLLShared\; C:\Program Files\Fichiers SharedCOM Shared\10.0\DLLShared\; C:\Program Files\Fichiers SharedCOM Shared\9.0\DLLShared\; C:\Program Files\QuickTime\QTSystem\; «C:\Program Files\Fichiers Autodesk Shared\ «;» C:\Program Files\Fichiers Files\Repro Desk; C:\Program Files\Microsoft SQL Server\80\Tools\Binn\; C:\Program Files\Microsoft SQL Server\90\DTS\Binn\; C:\Program Files\Microsoft SQL Server\90\Tools\binn\; C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\; C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\. H:\CSTPNT32; C:\MSSQL7\BINN; C:\Progra~1\DISKEE~1\DISKEE~1\;\Microsoft.NET\Framework\v1.1.4322
  
  C:\Stage12\startCD\Disk1\rapidwiz > EC SET = error code
  C:\Stage12\startCD\Disk1\rapidwiz > setlocal enableextensions
  «"C:\Stage12\startCD\Disk1\rapidwiz > set/p unpw =»
  C:\Stage12\startCD\Disk1\rapidwiz > for /F "usebackq tokens = 1, 2 delims = /" %i in ('APPS/APPS") set APPSUSER = %i & & set APPSPASS = j %
  C:\Stage12\startCD\Disk1\rapidwiz > set APPSUSER = APPS & & set APPSPASS = APPS
  C:\Stage12\startCD\Disk1\rapidwiz > IF '5' == '1' (THREADS SET = 1) ELSE (SET = 2 THREADS).
  C:\Stage12\startCD\Disk1\rapidwiz > CD /D C:\DOCUME~1\MUHAMM~1\LOCALS~1\Temp
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > path settings and classpath display REM for forest exploitation
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > echo "PATH to the - C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java - Setting."
  
  "Defining the path to-C:\Stage12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java-.
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > echo "CLASSPATH setting-.; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar-".
  
  "Setting CLASSPATH-.; C:\Stage12\startCD\Disk1\rapidwiz\jlib\java; C:\Stage12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\share.jar; C:\Stage12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar-".
  
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM these steps occur when dbseed is not "No. Database".
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > REM
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'View Demo' == "No. Database" goto: NO_DB
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > segs restoration UPDATE of REM in the context
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'View Demo' == 'Fresh Install' goto: FI_DB
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > set DRVNAME = gvision.drv
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 0 == 0 goto: UPD_RBS_VI_OK
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > goto: DONE_WITH_RBS
  
  C:\DOCUME~1\MUHAMM~1\Locals~1\Temp > if 'D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd' == 'D:\oracle\VIS\db\tech_st\11.1.0\temp\VIS_unit6253\adrundb.cmd' (if not '' runProcess_3' ' == 'FALSE' (goto: "runProcess_3") else (goto: runProcess_1))
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  
  Thank you.
  
  Antenor

  Hello

  The log file shows this error:

  [AutoConfig Error Report]
  The following report lists errors AutoConfig encountered during each
  phase of its execution.  Errors are grouped by directory and phase.
  The report format is:
            
        ouicli.pl               INSTE8_APPLY       -1
  
  AutoConfig is exiting with status 1
  

  Please see (Note: 989752.1 - installation 12.1.1 appears to hang it on Windows and later failed with the RW-50004 error code).

  Kind regards
  Hussein

• now that we are in July 2015 support for windows xp is dead. Until when firefox will support xpsp3. It is until December 2015 as google chrome or mid-2016

  support for Windows xpsp3

  Mozilla has not announced a given as to when support for WinXp SP3 will end.

• HP 15-r022tx Notebook PC has no driver support for windows?

  I think to buy a computer laptop 15-r022tx flipkart HP and it comes with free back installed on it. But I want to install windows 7 on it and have the drive to it. But I'll take not all pilots, and so I looked for the drivers and downloads on HP support website, but on it, the research did not find my cell phone. But the laptop appeared when searched the main site... Only the support site had nothing for her. What should I do now? I want to buy this laptop but how they acquire drivers for windows 64-bit u? Help, please.

  Visit the following Web page for the drivers:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = in & DLC = in & sw_lang = & Product = 7280191 #N1648
  
  p.s.: ignore the above post.
  
  Thank you
  visruth

• Support for Windows XP x 64 for NiDAQmx PCI-6601?

  We use the PCI-6601 with Windows XP x 86 and we want to move to Windows XP x 64.

  I have notced the discussion on this forum:

  http://forums.NI.com/NI/board/message?board.ID=250&requireLogin=false&thread.ID=20698

  Are there updates on support for XP x 64? The latest version of the software only supports Vista x 64 so far, and we are unable to use it for our application.

  Thank you.

  Erik

  Hello Erik,.

  Please use the support NEITHER.  From now on, we still have no support for Windows XP x 64, and due to the massive amount of Windows users from XP to Vista and beyond it is doubtful that we will in the future have the support for XP x 64.  From now on, your best bet is to stick with your current operating system, or if you need to move to 64-bit then, as you have already mentioned, we manage Vista x 64.  I hope this helps.

  Kind regards

• fact Intel(r) 865 G Graphics support for windows 7?

  My motherboard does not support windows 7 except my graphics driver. Is there a driver for it can you please sent me the link.

  You would go to Intel.

  Supports (or lack thereof) of any material that you connect to your computer running any operating system actually comes of (or does not) the manufacturer of the device physics of said - not the manufacturers of the system in question.

  Web page of Intel driver

  What is the specific motherboard model/manufacturer?

  32-bit or 64-bit Windows 7?

  Although - frankly - looks like you're out of luck.  The manufacturer (Intel) just can not support in this operating system.

  • support for WIndows 7 32 bit for the 865G chipset
  • support for Windows 7 64 bit for the 865G chipset

  I suggest you use the page to identify your Intel® graphics controller to check what you have.

  However, please take note:

  Intel released newer drivers XPDM for old graphics controllers?
  Intel does not plan to release new XPDM drivers for the following former Intel graphics controllers:

  • Chipsets Intel® 915GM/GMS, 910GML Express Chipset family
  • Intel® 82915 G/82910GL Express Chipset family
  • Intel® 82865 G Graphics Controller
  • Intel® 82852/82855 graphics controller
  • Intel® 82845 G Graphics Controller
  • Intel® 82830 M Graphics Controller
  • Intel® 82815 Graphics Controller
  • Intel® 82810 Graphics Controller

  So, again, you can be out of luck to try to launch a new Windows operating system (Windows 7) on a system with this video chipset without just buying another video card and put it in the system if possible.

• 22/07/13 - caveat, 'ZIRCON SYSTEMS, TECH SUPPORT FOR WINDOWS' CROOK, USING THE PLOY of id # 888DCA60-FC0A-11CF-8F0F-00C04FD7D062

  Last week, and now on the longest phone conversation with me this morning, Mon, 22/07/13, phone swindler wants to CHECK the ID NUMBER OF YOUR COMPUTER.  A 3rd call repeat 'husband' today, from "Steve Matthew," of "Zircon systems", where the staff is all "Microsoft Certified technicians".  Said our PC has been disconnected from the server "universal routing" and needed to check the identification number.  Said computer infected and disengaged, errors with malicious files.  That 50% of Microsoft applications does not.  Finally, after several questions polite but stupid me, as if to say but our computer works OK?  the appellant was told that he is temporarily hung up a temporary server! but it must be reconnected...  After having his name and telephone number - strongly Indian accented man "Steve Matthew" on the phone # 408-498-3608, and have patiently give me the 888DCA60 etc etc 32 numbers, he indicated that he understood my being suspicious, but it is a Microsoft Certified tech, calling for Windows, have we not Windows 7 or XP or Windows 8, etc.?    And he said I could not find the computer ID number easily, it wasn't on our guaranteed purchase paperwork, etc, that I would need to go online with him, to find our location.

  Knowing that registrations for computers, go directly to the manufacturer only if you send the information on your purchase, and that no known iin manufacturer sends the modern world 'Oops, you're disconnected' phone calls, it seemed a bit of fun to keep to provide information...

  So I explained to Mr. Steve, when he repeated for the 4th time that it has been certified Microsoft Tech and trustworthy and kept warning me that our computer would break soon, that, by analogy, certified Subaru Techncians had simply taken a few classes to automotive Subaru training and were not necessarily qualified or guaranteed to work on my car the certification does not matter, you should still consult your dealer, the garage, make sure it's good reputation.    Then, I asked him directly, so, on a phone call from me, a total unknown, he would be willing to send me or transfer to me $2 000,00.  He actually misses, in dismay.  So I repeated it-$ 2,000, say, in US dollars, would it send it to me, if I had called and told him his bank account had been disconnected from his bank, and I needed to reconnect it?   He ate and asked me ' you mean $2,000! $? ' so I said yes, would he give me or transfer to me on this amount, based on a phone call?  He said absolutely not.  End of quote.   I told him how we would check with some type IT geek friends we know, took his phone, name and said I would be back to him and please DON'T NOT CALL BACK IN AN HOUR, BUT PUT us WE HIS DO NOT CALL LIST.

  At this point, I googled Zircon systems - and there is no such American society less than a jeweler or invest co. in Illinois), although I had a systems Zicom in India, which seems to be the sale of legitimate & electronic security systems and then I googled the identification number, find some great ads about what happen and asks what will be PayPal scam, if one agrees with the appellant and goes online and follow their directions.

  (See mutation 2012 of a David Jacoby to http://www.securelist.com/en/blog/208193750/ , who described a telephone scam quite similar, with the technical information, copy requested screens, orders).   Maybe giving a technical support genuine or scam to support people on your side, an idea of what was going on my caller to walk me through, if I had fallen for the Universal Server disconnected claim it does?

  Hope this helps to update your information, files.

  In any case, this is my first time ever having reported a telephone scam.  Thought it would do, seems since then I received a call from update and more sophisticated scam.  My husband simply hung up on the caller last week - he knows little re our PC, I ask more tech-savvy people to help if necessary.  But then, the scammer called back, too.  If something had to be done to put an end to the process?

  Don't forget, if you get that kind of call, simply ask the crook to trust YOU, say that you are a certified technician to bankruptcy with years of training from the IRS.  Ask if he is personally prepared to transfer $2 000,00 to you (via Paypal, do not give your bank account to him for any potential future direct deposit!), but preferably by cheque of... And it must be sent to the address of your worst enemy in life, as you need the alimony to a former spouse.  Or to a mailbox in a different city than your...  And then tell him you'll telephone him with the identification number of your computer, once you have verified that the money is in hand.

  Done politely, in a pleasant soft voice, you would be surprised how unprepared the scammer or snow must be befriended as a simple employee, but itself for you send funds then asked?  I'm looking seriously for the money from them here - I'm not asking in fact send me $2,000, but I said that I was trying to explain by analogy, with auto - trained technicians and requests for money, why I wanted to check with the best-known people before giving identification numbers.  Analogies, it seems well understand what we hear - an example?  I just him speechless when I wanted a large amount of course him sent me instead...

  Uh, Mr. Steve Matthew, Zircon systems, technical support for Windows company, also clearly didn't "want to send me a few thousand, and he hung up, after I suggested that he does not call again, asked him to put us on the list of subscribers do not call...   Clearly a new variant, although, in the wick on the Microsoft Certified Tech claims, the name of Zircon systems company and so I thought after that.

  Hello

  I had a similar call from Indian women (?) strongly accented called 'Janet' of 'Zedconnsystems', based in Floria, USA. She had called asking to speak with my roommate to tell her at the computer (which is mine) showed the error messages.  She shook off the usual garbage and was unable to answer most of the questions I asked, but gave his phone number as 4084983608.

  As far as scams go this one seems rather transparent, but mention on the off chance someone saves a load of hassle!

• Support for Windows 10 in Qosmio X 70 - has

  Hello

  I have a X 70-a, and according to the plan of Toshiba support, full support for Windows 10 only will be available January 31, 2016 ('coz that's what you get when you pay 1500-2000 euros for a cell phone, right?)

  Any who tried to win 10 on a similar laptop? Personally, I don't see what is the hold up and do not understand why they need half a year to offer support because most of the drivers Windows 8.1 should be available (assuming that they were well written in the first place).

  "That's what I get for a laptop of 1,500 euros" is exactly what I had in mind when searching for this Web site in order to get my windows 10 drivers only to find out that I am not on the priority of Toshiba.

  Keep the windows 10 update has an option to restore your old windows for a month (available in recovery at startup menu), I took the plunge by installing Windows on my 770 - 13F X 10.

  Here are the problems I encountered (I guess I'll find out later):

  -Windows installed a bad driver for the wifi adapter (Qualcomm Atheros) that makes the BSOD on startup. I manually installed a Windows 8.1 driver found on a non official (atheros.cz) in safe mode, with a second PC and a USB key.
  Win 10 then start over, but I can not activate wifi, both front panel and fn + F8 key for wifi doesn't seem to work. If anyone has a solution or just a hint...

  -The main Win 10 Search bar doesn't seem to be functional. It's weird and annoying.

• Technical support for Windows 7

  I have a HP computer factory Windows 7 installed. Where can I get support for problems with Windows? Microsoft does not seem to give him, because it is an OEM license, but the HP technical support claim that they offer no support for Windows or!

  Y at - it no support for this kind of factory installed Windows?

  Escalate the problem and ask for a Manager. The technical support people general HP still don't know the facts that they should. You are a paying customer, so keep pushing and demanding support under your warranty.

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.