Support of Oracle test requirement for admin rights
HelloThis is perhaps a silly question, but I think that its better to ask to be in doubt.
I use 1 BTA and server PCs 2 remote agents for load testing. I asked for a single user (with password) which will have rights of a local administrator on all 3 PCs. I was wondering if the rights of a local administrator on the PC is sufficient for the OLT/Remote agents or do I need to get administrator rights on 'client area' (which will be denied without a doubt). Please confirm.
Concerning
CP
Hi CP
You have to be ok with local administrator rights.
The only reason I see to have domain privileges would collect serverstats on remote Windows servers using WMI/Perfmon. Because it is needed to perform the service of OATS as a domain administrators (or at least an account that has privileges on windows remote).
See you soon
JB
Tags: Oracle Development
Similar Questions
-
Then try to install a printer to my system HP Vista says he needs admin rights?
As follows:
This software cannot be installed using the command "run under...". ». The installation cannot continue until this is resolved.
Action required: click Cancel to exit this software installation. Sign out and then sign in as a user with administrator privileges. (Contact your system administrator for more information.) If there is no system administrator, ask the primary user of this computer installation software. Restart the installation by removing and re - insert the installation CD.
Hello
Method 1:
I suggest you open the user account control and check if it helps:
Enable or disable the User Account Control
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off
Note: Make sure that return you what UAC on once the problem is corrected.
Method 2:
This problem may also come from damaged user account that so I suggest to create a new user account and check if the problem persists.
See the link below for more information on the setting of a corrupted user account.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Hope this helps,
-
Hi all
I just wanted to know if oracle support the CPU patch for Oracle 10.2.0.4.0 platform 32 bit on the 32-bit linux platform.
Any update on that highly is apprciated.
Thanks in adavnce
Then submit a Service request to get an official response.
Nobody here can talk about Oracle Corp.
-
Is Oracle Client required for Essbase
Hello
Can you please let me know if customer Oracle is a prerequisite for Essbase server and shared services? Do we need of installing it on the server before installing EMP 11.1.2.2.
Thanks for your time on this.
Thank you
HariNo, this isn't a requirement, products that do not require it are specified in the http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_start_here_1112200/ch05s03s01s01.html
See you soon
John
http://John-Goodwin.blogspot.com/ -
Beta-Tester required for Sierra?
What should I be a beta tester for download Sierra? I tried several times to download and still get a message that it failed.
Second, how to register for the beta test?
Thanks Barry
Is there other information with the message that "failed"?
-
VALIDATION required for invoker rights proc?
The proc following EXEC_PROC in a package named PKG_DYNAMIC_SQL is called by the RUN_PROCS proc which is in a different package below:
PROCEDURE exec_proc (pi_proc_name IN varchar2, pi_acctky IN varchar2)
AS
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
RUN IMMEDIATELY "BEGIN" | pi_proc_name | '(:acctky);' | "END;" USING pi_acctky;
END exec_proc;
PROCEDURE run_procs (pi_proc_names_tab IN pkg_types.t_tab_proc_names)
IS
BEGIN
FOR indx IN pi_proc_names_tab. FIRST... pi_proc_names_tab. LAST
LOOP
pkg_dynamic_sql. EXEC_PROC (pi_proc_names_tab (indx), pi_acctky);
END LOOP;
END run_procs;
The pi_proc_name is a set of stand alone procs that do an UPDATE statement. I find that I have not a statement COMMIT within each pi_proc_name, I get an ERROR of EXECUTION. Am I right to say that cause I have a BEGIN END (anonymous block) pair around the invocation of pi_proc_name I use INVOKER RIGHTS? That has something to do with the error when the called proc does not commit before stopping?
Please help me understand why?An "autonomous operation" must always have a commit or rollback, as part of the operation. Has nothing to do with the rights of the appellant.
This is why you are getting the error.
-
Software installation Oracle &; DB creation with ADMIN No. rights!
Dear all,
I wonder for a long time, is it possible that we can install the Oracle software and create the SRD without the administrator rights on the Windows machine. ??
Due to some issues of strict security, we are unable to obtain the rights of administrator of our system administration team.
Oracle have all this available laptop installation? where no installation is required and simply we can decompress Oracle executable files and can create databases of data, etc.?
MySQL have this type of facilities available.
Please any help would be appreciated.
Thank you!!hp_ora_dba wrote:
It's true, I do not accept the fact that Oracle is Huuge (lots of features grouped) compared to MySQL.But for such requirements, Oracle should have a few exits from Lite version available, which could be treated in a very flexible way and where it should not require any Windows registry entries during installation, and any local domain user can install and use them for learning / development.
The 'lighter' version would be XE, but even that will require an installationwith registry entries.
Larry Ellison is to disagree with you on what "should" have Oracle. They make the full breath, Enterprise Edition free for exactly the purpose you describe. SSII not much this. I think it is much better than to worry that someone does not have on their own machine admin rights.
Do you have a personal machine, apart from that of your employer controls? If so, why not use it? Please read http://edstevensdba.wordpress.com/category/opinion/ to see on the creation of your own personal testing system.
-
How to give Admin rights for specific applications in windows 7 Stater
How to give Admin rights for specific applications in windows 7 Stater
I have a problem in Windows 7 Stater PackI do not know where to place the issue or create the question
My problem is that I can give admin access to application specific to Windows 7 stater
in fact I use photon AUNTIE I want to be accessed by a Local user Standard user is not an admin user
Once I click on the icon of Photon to connect it always ask for admin password.
I want to work on a local user without admin password
Please help about this.
Thank you.
Hello
Note: To be logged in as an administrator or enter creditionals administrator account to make changes
Method 1:
The prompt that you get is the setting on your computer user account control. You can change the setting and use them according to your requirements and run programs in the standard account. See the below links for more details-
http://Windows.Microsoft.com/en-us/Windows7/what-is-user-account-control
http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings
WARNING: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.
Method 2:
You can even use the steps below and check-
1. right click on the program file , click on Properties.
2. now click on compatibility and select run the program as administrator.
3. now click on change settings for all users and click ok. Now, check to see if the problem resolves.
I hope this helps. Let us know the results
It may be useful
-
Original title: DLL required for uninstall and install iTunes?I get this message: there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.
I can't install and uninstall iTunes no matter what I do. Help, please!
Hi stjimmy9999,1. are you able to install other programs on the computer?
2. what version of iTunes you are trying to install?
3. have you SpyCatcher program installed on the computer?Program SpyCatcher interrupts the Windows Installer to not save the files during the installation of iTunes.Try these steps and check the result.
Step 1: Download the latest version of iTunes
a. visit http://www.apple.com/itunes/download/
b. click on 'Download Now' and save the file to the desktop.Step 2: Install the program as an administrator by disabling all programs currently running on the computer, non-Microsoft
a. open the article: http://support.microsoft.com/kb/929135
b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
c. restart the computer and right click on the Setup file of iTunes, right-click on the file and click Properties.
d. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
e. click ok to apply the changes.
f. open the file and install it.
g. Article, follow "step 7: reset the computer to start as usual.For more information on installing iTunes, see the following article: difficulties to install iTunes or QuickTime for WindowsFor further assistance with this, please ask a question about iTunes ForumVisit our Microsoft answers feedback Forum and let us know what you think. -
Protocols supported in OAT 9.2 for load tests
Hello
Can someone help us to provide a list of protocols supported by OATMEAL 9.2 for load test applications.
Thanks in advance.
Kind regards
MaheshHi Manu
OATS 9.20 has the following modules for load tests:
HTTP/S
-Siebel
EBS/forms
-ADF
-Flex
-Oracle databaseConcerning
Alex
-
6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package. A program required for this teaching to complete could not be run. Contact your supplier of staff or the package of support ". There is no associated error code. I've never had a previous issue with ITunes updates. Thank you, Debbie
Repair Apple Software Update since the programs & features Panel configuration and then try again.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Definition of administrative rights required for Firefox
I need to know if it is possible to define the Internet options to force the admin. rights. We have a problem with people who view the images that they should not, and I would block them on some sites.
I want to know with certainty before taking the time to see if there is a way to lock down Internet Explorer.
I don't use Windows much these days, but I guess it's relatively trivial to remove IE for any particular limited account access. However, the computer is likely to need IE, so don't remove it does not quite.I'm not sure that you necessarily get your goal by locking just the preferences of Firefox, but that seems to be what you ask and can be done, see:
Perhaps an option is to have accounts of separate computer OS for youth and adults. Then, it would be possible to use the firewall etc settings to block some sites for a set of accounts.
You can find a network, possibly with Firefox ESR would help. That would allow the accounts to individual users for each person. It's not something that I am well informed on the subject, but you could look for advice on the mailing list
-
Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...
aarruunn, you might want to try Windows Installer Cleanup utility.
http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html
-
Original title: after recent update, the installation software WONT work properly! Help!
- I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.
I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".
Anyone know what I need to do? Or how to fix it?
Hi MxGurl,
If this occurs after the installation of update Itunes, then go to the following link and check if it helps.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717
If this does not help, you should contact Apple support or post in the Apple discussion forums.
http://discussions.Apple.com/category.jspa?categoryID=149
You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
- I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.
-
Error FSX Gold - "the graphics card does not minimum requirements for support of shader."
I just bought FSX Gold and I have installed two of them, but when I click to open it it says "the graphics card does not meet the minimum requirements for the support of shader. This product requires a geForce3/Radeon8500 class or a better graphics card. Flight Simulator will now quit. "I went to support to see what happened and he said the need Shader 1.1 or later so I checked my Shader and he said he was Shader 2.0. you guys can tell me what's wrong.
Details:
CPU - Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz
Speed of the CPU to 2.4 GHz Performance rated at: 5.28 GHz
GB OF RAM - 6.0
OS - Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 64 - bit
Video card - Intel (r) G33/G31 Express Chipset Family- Video RAM - 287.0 MB
- 3D - Yes
- Hardware T & L - No.
- Pixel Shader Version - 2.0
- Vertex Shader Version-2. 0a
Version of DirectX-11, 0
Sound Card - Realtek High Definition Audio
Free disk space - 356.3
DVD - ROM - HL-DT-ST DVD-RAM GH10LThat's all. I hope you can help!
Hi Man Com,.
I suggest updating the video drivers from the manufacturer's Web site and make sure that direct X is enabled in the graphics card Control Panel conrtol.
For more information, you can consult the following articles:
Updated a hardware driver that is not working properlyThe problems of the game performance
You can also read the following article and see if it helps.
Solving graphic problems in Flight Simulator X
Hope this information is useful.
Maybe you are looking for
-
MY air game is orange flashing instead of stay green. What is the problem
-
HP ENVY m7-u009dx: battery replacement Options?
I noticed how there is no Abu topic this nor any category on this issue. I recently bought this laptop HP Envy m7-u009dx and realized that the battery is not external. I use this laptop on a daily basis and know that this laptop will die in a year or
-
Additions/removing applications from the dock
Hellotwo little question. 1. is it possible to add/remove applications from the docking station? I have pictures and it iTunes for some reason or another, and I did not really need them. 2 is. a similar question, possible to uninstall some of the App
-
The game on my computer quites that responded to the questionnaire to halfway through most of the games. Very frustrating. What can I do?
-
I don't know how it happened, but the blue bar, I think he called a toolbar, which usually just runs along the bottom of my screen suddenly popped up and is now vertically on the left side of the screen. Help, please