Support of the problem get to my CQ3230AN.
I have a Compaq CQ3230AN that I've had for a few years now.
When I try to search in the support and drivers, it comes up with another computer then mine, with the same model of the brand, it's a completely different picture, is it my computer with a different case or what?
Oh God, I thought, I was looking at the wrong thing
Tags: HP Desktops
Similar Questions
-
Vista to the top of the problems - get error message 0 x 80070020
You can also read "the process cannot access the file because it is being used by another process".
First, disable all security or anti-virus software you use.
Then disable error reporting: http://www.howtogeek.com/howto/7863/disable-error-reporting-in-xp-vista-and-windows-7/.
Then see if the backup works now. It's two solutions I found online that worked for others - but you might have a different problem (but it's worth a try).
I hope this helps. Keep me in the loop.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Someone at - it overcome the problems get CMYK colors to look the same as RGB colors?
Hello
It is a first for me. Thanks in advance for any input.
I'm working on a CMYK created .psd file. I have the whole doc but my problem is that I cannot reproduce the colors I have in a similar document RGB. I tried copying all layers above the RGB file to the CMYK file, but the color is still off - path. Hot blue becomes dark purple.
This is for printing (business card).
The RGB color is #0000ff. I looked around and did not find a comparable colour in cmyk palette. I tried some of line converters rbg to CMYK, but nothing helps.
Am I missing something or is there no way to solve this problem?
Thanks in advance...
you want to read about Photoshop in colours of the range, test colors, never...
http://www.gballard.NET/PSD/cmstheory.html#gamut
hot blue, purple, and green in the RGB look terrible during the conversion to CMYK, because they translate well
-
Hello
While trying to start wirtual lab I received the following error:
There was an error in the environment of virtual laboratory of construction. Try again or contact support support if the problem persists. Error code: 1. status: failed
I tried to run the laboratories of different pc and got the same error each time.
Please specify what is the problem?
Yesterday, I used these labs without all the problems.
I added the site in the zone of confidence. also all of the custom software add-ons necessary have been installed.
Thanks in advance.Hi AndriiKyianov,
Thanks for posting your question in the Microsoft answers Forum. Your question about Lync Server 2010 it will be better answered by experts in the Lync Server Forums. Please repost your question here.
-
I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.
Acrobat 9 is not compatible with the current operating system, which is probably the reason why they don't support you, but they still let you know if your s/n is valid or not... Try to contact them again and ask for this information.
-
When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor detect the problem. "However, when we click on"Get Adobe Support Advisor. It is not to us to show how to solve the problem.
Hello
Please see failed to initialize the installation program
"Installer initialization failed." I have tried everything what it but no dice.
I hope this helps!
-
Where can I get support for a problem with a member of my team of cloud that receives the message that there no access more even if he is invited to the team?
Please try to delete this user and try to reassign the seat for him. You can try to contact customer service for assistance. Please check the manage your cloud creative teams membership
-
I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?
Hello
Just sent you a personal message
Let me know if you have any question.
-
Try installing Adobe Indesign CS5.5 on a new computer and get the error message "setup initialization failed. Please download Adobe Support Advisor to detect the problem. Adobe support advisor is is no longer available. What should I do now?
-
I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?
He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.
-
My computer the battery does not charge. I bought a new battery and I changed the AC adapter but the battery still won't charge. This is the message I get:
0% available (plugged in, not charging) don't know why.Hello
1. What is the number of brand and model of your computer?
Let us try the steps mentioned below to see if the problem is resolved.
Step 1:
a. Click Start; type devmgmt.msc in the start search box and press ENTER.
b. expand the batteries category.
c. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.d. on the Device Manager, click Action and then click Scan for hardware changes.
Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power. The notebook should now indicate that the battery is charging.
Step 2:
If this does not work, try power cycling of your laptop by following the steps below.
a. remove the battery from your laptop, and then press the power button to all 15 sec.
b. now connect to the battery and check if it works.I suggest also, please contact your computer manufacturer to see if they have any suggestions about it.
-
Where is my specialist? I have not received any messages because I make errors of my computer certificate affects most of the sites I've used until today. Somehow we lost the contact.
Hello frankejay,
· Are what errors you referring certificate?
· You do not receive the prompt for security certificates?
· You run your Internet Explorer on a domain environment?
· What exactly is the problem you're talking about?
Certificate errors occur when there is a problem with a certificate or the use of the certificate server. Internet Explorer can help keep your information secure by warning you about certificate errors.
Read this article for more information on this:
http://Windows.Microsoft.com/en-us/Windows-Vista/about-certificate-errors
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
-
Problem getting my WiFi connection after the mode 'sleep'
After my computer wakes from sleep mode, I click on my WiFi network every time to get on the internet. If I restart my computer, it detects my WiFi network and connects ok. It's just at the time when it wakes from sleep. I tried many solutions that people have posted for example to remove some files from my SystemConfig., but have had no luck.
Hi joycefromil,
I understand that your Mac has problems automatically re-login to a Wi - Fi saved after wake up from its sleep. I can understand the concern here; It seems that it would be a bit tedious to have to re - connect manually whenever you wake your Mac from sleep. I'm happy to help you with this problem.
As a first step, try to remove your Wi - Fi network in the preferred networks list and then add again using the steps here:
macOS Sierra: choose the preferred Wi - Fi networks
Try to test for the problem to see if it persists. If so, I recommend that you try to start your Mac in safe mode and test for the issue. Once you're done test in safe mode, restart your machine normally and try test again to see if the problem has been resolved.
If the problem persists in safe mode, try to create a test on your Mac user account to see if the problem is here. This will help to further isolate the issue. Take a look at this Web site for more information:
How to test a question in another account on your Mac - Apple Support
Take care!
-
I tried everything but keep getting "SERVER NOT FOUND TRY AGAIN" when I try again once it normally connects. What is the problem please
This can have several reasons:
first make sure that your firewall/security software allows firefox to fully access the internet.
then you can try the solutions (proxy settings, the change of dns server) provided in this support thread: https://support.mozilla.org/de/questi.../704934
If this does not help, also try disabling ipv6 as described here: https://support.mozilla.org/en-US/kb/Server%20not%20found?s=server%20not%...
-
Problem started when I could hear sounds watching videos, for example, Netflix, but couldn't hear during playback of music, for example, MP3. As I was trying to shoot of boredom that I realized that I couldn't hear anything with the headphones plugged into the headphone jack 3.5 mm. Then I discovered that the hp support site has all the drivers for my model spectrum.
I followed the instructions listed here... http://support.HP.com/us-en/product/HP-spectre-13-4000-x360-convertible-PC/7527520/model/7791774/doc...
but nothing has fixed the problem. To the best of my knowledge, I have all the latest drivers from Realtex and Intel. There is no driver option Microsoft High Definition Audio "generic" indicated in the list of drivers on my computer and I didn't understand how to get a.
Can anyone help?
Thanks for the reply,
I did some research and found this link contains driver HD Audio Windows (generic), although this is not necessary if the drivers realtek audio have already been updated.
If the helmet works on another device and still does not work on this computer, it is possible port is faulty.
I would recommend that you get it repaired or replaced by HP support by phone:
HP technical support are available by clicking on the following link:
http://h22207.www2.HP.com/us-en/?openCLC=true
(1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
(2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
(3) Once finished, click the "Show Options" at the bottom right.
(4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.
Maybe you are looking for
-
Disabled but MultiCam clip the original always support here
I am almost at the end of a long project and all my blocking clips are red with the warning triangle. The original media, where the multicam clip is composed of, is still there and accessible if this isn't a case of media missing or not coupled. In
-
How can I download a version update of safari
How can I download a version update of Safari?
-
Satellite X 200-20 s - LAN does not work after BIOS update
Hi all I've updated the BIOS version 2.7 and NIC LAN just disappeared from my list of device. The wireless network card works fine however. When I plug the ethernet cable, the green light turns orange not, so I guess that it is not broken, as it work
-
Need Satellite M70 Recovery disk
Hello whenever one make a post the next day, it will be deleted...Could someone tell me why... ? I need a recovery CD for my Satellite M70.No doubt this question is asked before... But I really need a help? Jerry
-
incorrect thermocouple reading
I have an NI PXI-1033 with an NI TB-2709 block and I'm under Labview 9. I'm just trying to read the temperature with a thermocouple to any of the eight channels. Unfortunately, when I look at the reading of the measure and menu task Automation Explor