Support of USB drive: auto XZ closed

Similar Questions

• USB driver is not support for HP Deskjet 1050 j410a.

  My HP Deskjet 1050 j410a is installed on a windows 7 and show a code 37 error message which means usb driver is not supported. I had reinstalled so many times and also restarted the pc but the problem does not resolve itself. kindly help me to solve this problem.

  Hello

  Make sure you first upgrade the driver by uninstalling the HP software and install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4062&product=4027465&sw_lang=

  If the same continues to try to plug the USB key into a different port on the PC and check any change.

  Then try another device (for example, the disk on the key) and check if you can see a similar behavior, if so the problem may be with your PC Chipset problem.

  If the issue appears only on the Deskjet 1050 and no step has not resolve the problem, try an another USB cable from the printer and check any change.

  Shlomi

• No compatible USB driver

  Hello everyone, I had a problem after in place upgrade to windows 10.
  the usb driver is completely does not work. If I plug any usb device kind he'd jump as unknown device in Device Manager.

  all installed on USB contoller on Device Manager works. But if I go to properties > event, it will appear (configured) device not migrated and null notification

  my laptop: vaio EVS 14126 cxb
  usb driver: chipset family Intel (r) 7 series \c216
  OS: windows 10 unilingual home. version Build 10.0.10586 1511

  what I tried:
  1 reinstall the driver from the manufacturer's original (the most recent driver is 2013, and I do not think that this support would win 10)
  2. I tried updating using the driver intel update but nothing found (there is no compatible driver)

  no idea how to solve this problem? recovery is out of the question since I accidently deleted the recovery image

  I have upgraded and also installed the driver from the link. I've already updated with vaio update, but the problem still exists.

  in fact 2 days ago, I did own install.i use boot inherited and closed in secure boot mode, because UEFi will not work. then I deleted the partition because it used acvept GPT so I use NTFS installed instead.then victory 10.

  now, all is working.i can probably guess when I update to win 8.1 to 10 something goes wrong.
  in any case, the problem is resolved. Thanks for the reply.

• USB drive unplugged when wake up mode 'sleep'

  I use windows vista business version for my 6400 Dell insporon laptop.

  When my laptop wakes mode ensures, in the wondows login procedure, it seems he disconnected from usb drives to not communicate with windows at this time. One of the USB (simpletech 2 TB) was not connected (it loses the drive letter in windows Explorer). Two other brand always connected.

  If I recycle the power of this USB, it connects back.

  Simple question: where can I change once and for all so that I don't have to recycle that drive usb every time when you wake up mode 'sleep' (she becomes very annoying since this USB does not start button / stop)? Personally, I think it's microsft windows 'default login procedure question' no usb drive manufacturer bug (contact usb drive tech support).

  Thanks in advance for any help.

  Hello

  The problem is perhaps due to several parameters being off, and you can actually have
  go through the list again. It could be you have a hardware problem with
  the USB port or might have to reinstall Windows. Even if it is complex you need to use this
  keep track and not as a menu.

  Another possibility is to use a clean boot to see if something in startup is at least partially
  in the mixture. It is the only method of control similar to your idea about the login procedure.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx Rob - bicycle - Mark Twain said it is good.

• How can I make an external USB drive read-only?

  I'm trying to find a solution to take a USB HD in a spacing classified environment / air.  If I can make the drive read-only (like I gave him that I need to copy on these machines), then the Agency will probably approve the device.  I can't use DVDs that data are 30 + GB in size.

  Hey there, capsfanva!

  Welcome to the communities of Apple Support! It seems you need to set permissions on an external USB drive or hard drive. These permissions setting is a great way to improve the security and privacy of these elements. You've come to the right place and you will find the answer below. You must connect the device to your computer and follow these steps:

  Set permissions for the items on your Mac OS X El Capitan:

  See you soon!

• How to set ff to access RoboForm-to-Go connected USB drive?

  I have roboForm-2-Go on the USB drive. Firefox is not see it.

  Have you tried to obtain the support of Roboform?

  I do not use Roboform myself, but I suspect that some sort of add-on might be installed for Firefox to access the data stored on the USB key.

• El Capitan - Ext. USB Drive not mounting

  Since the upgrade to El Capitan, I have not been able to access my external USB drive. I read the other posts about this problem and none of their solutions worked for me. Through repeated trial and error, I came across a solution that allowed me to access my USB drive in El Capitan. By attaching a USB hub to USB port and your device your drive should become accessible. Depending on what type of car you join you may need a powered hub. I enclose a mSATA drive to a hub powered and well.

  Hi Bob, there.

  Looks like you're having connect your USB drive to a hub so that it works with your computer. I would reset your PRAM then your SMC in this order:

  How to reset the NVRAM on your Mac.

  Then:

  Reset the management system (SCM) controller on your Mac.

  If the problem persists after that I have would then start in safe mode to clear some system-level caches and perform a disk check and repair if necessary:

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  From: try safe mode if your Mac does not start-up

  Once you log in safe mode, reboot normally and try again the reader. Thank you for using communities of Apple Support, let us know how it goes.

• Apple iPhone 4S for windows 8.1 usb driver

  Apple iPhone 4S no usb driver for windows 8.1

  Hello syap_pop,

  It seems that you have the driver installed on Windows 8.1 for iOS devices. Use this section of the following article:

  If iTunes does not recognize your iPhone, iPad, or iPod

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  Thank you for using communities of Apple Support.

• USB drive not recognized on the A30-151 in XP

  After a clean install of Windows XP Pro on a Satellite A30 151, a USB device remains in the category 'Other' (after installation of the graphics and audio drivers, modem) for which no driver seems to be available on the drivers CD. At this point, the category "USB" contains four entries, two standard "Universal Host Controllers" and two "OpenHost' controllers, with the default drivers.
  I suspect that the missing device can be a USB 2.0 "PCI controller host improved USB" from another manufacturer, but Toshiba does not offer a driver for XP for it then it should be supported by the OS (?).
  Any suggestions as to what can be and what drivers need?

  It turns out that XP does support USB 2.0 according to the SP1, it seems a pre - SP1 version of XP Pro leads the native Windows drivers is not available. For anyone in a similar situation, it seems as if a) upgrade to SP1 or b) install the hotfix Q312370)

  http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe

  for the English version should throw a lot of download sites) followed by the autodetection of the native Windows drivers should do the trick. However, the following SP1 problem may come into play

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001c0d

  in this case, the "NEC PCI to USB Enhanced Host Controller B1" driver required original can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 Toshiba driver download page.

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• Excite AT10PE-A-105 - cannot install and use USB driver

  Hello

  I bought the AT10PE-a-105 and I never managed to install the driver for debug applicatoin android with eclipse.

  I use Microsoft 8.1 64 bit (last updated).
  I'm following the available tutrorial (RTFM).

  Even I'm a fan of the home user, I need to root and the USB driver works. I post a bad review on gsm arena.

  Someone was able to use the USB driver?
  [usb driver | http://support.toshiba.com/support/viewContentDetail?contentId=4001813]

  I lose 2 days trying to install the usb driver without success and I give up.

  Material may not be updated compared to the pilot then could developer team Toshiba could do a upgrade from usb?

  Concerning

  + The message was edited: link has been removed not allowed.

  Your excited AT10PE-a-105 was released in the European region and it seems to be the right Android WinUsb driver

  http://support.Toshiba.com/support/viewContentDetail?ContentId=4001725

  The driver has been released for the operating environment
  Windows XP SP3 or later (32-bit Version)
  Windows 7 SP1 or later (32-bit / 64-bit Version)

  8.1 Windows isn t taken in charge and I guess this is the main reason why you can not install the driver on your system.

• USB drive not readable on the Satellite A665-13W

  Hello

  I have the following problem. I have Kingston DataTraveler HyperX 64 GB (USB 3.0) by car and it is perfectly readable on other PCs without worrying if I connect it to the USB 3.0 or USB 2.0 ports.

  The device is detected in Windows 7 64-bit on Toshiba Satellite A665-13W and I see it in Device Manager. He invites me to open the disk E: (NTFS volume), but it looks empty when I open it in Explorer Windows with a certain delay when Explorer seems to scan drive.

  I see some errors in the event viewer such as:
  Event ID 11: driver has detected an error in the controller on \Device\Harddisk1\DR2

  But when I connect for example Patriot 8 GB USB drive it works without problem. When I boot Windows 7 in safe mode, the Kingston DataTraveler HyperX 64 GB drive is connected, and I can read it.

  What should I do to make it readable without going into safe mode?

  I have the latest BIOS 2.30, I tried to enable/disable USB legacy support, I tried the fast/normal startup, I tried to install the latest Intel Chipset drivers, I tried all USB ports, including one that can be used as eSATA port, but without success. I also uninstalled the recognized device driver and let Windows detect the device again and reinstall the driver, but also without success. I also disabled power management option to disable device, without success.

  When I start in normal mode, I can't read NTFS volume. When I boot in safe mode I can read. The USB works on other PC in normal mode. Old USB 2.0 USB key works in normal mode. Strange. It must be a firmware problem or driver in my opinion. If it is a hardware problem or device the device would not work in safe mode!

  Are USB 3.0 64 GB of storage devices that are compatible with Toshiba laptops with USB 2.0 ports?

  There could be a problem of compatibility between the USB controller and the USB key.
  This compatibility questions aren't unusual.

  But I m wondering if you could try to fix this in the other direction:
  First check to see if the USB flash memory stick would appear in disk management

  Panel-> management-> disk management computer

  Here you will see all the partitions on the HARD disk and the USB connected.
  Check if you can format the USB key once more.

  If the USB does not appear here, try this method:
  Start the console by typing CMD
  Then type the command: diskpart and press enter
  Now, type command: automount enable and press enter

  Now, close all windows and restart the laptop.

• Superdrive Apple USB drive problem

  Situation: The internal superdrive on my MacBook 2009 stop working while I bought a new USB Superdrive.  And only after I plugged it in, has indicated that it is incompatible with my computer.  After reviewing the advice here, I said that most of the optical USB drives on the market are compatible with my computer, so it's something to look at.  However, this year I plan to get a new MacBook, date at which I will need an optical drive that works with newer computers.

  Question: Will be one of the current after the market of optical drives work with the new MacBook? Or should I just keep the Apple Superdrive that I currently have to use?

  Thank you in advance.

  No first hand experience, but I think that number of external optical drives from third party works pretty much any computer that has USB (and much less expensive than the Superdrive).  The only glitch, I know is that application Apple DVD Player can bother but there is a harmless hack that gets around that, or you can use an alternative player such as VLC (I never use DVD player).

  You can browse the web site OWC/mac - ventes.com.  If you know exactly what you want and need no support there are many places to watch it's maybe a dollar or two cheaper but every time that I'm not sure I call them and ask and am happy to spend the little extra to support the customer.

• external USB drive not seen

  Hello

  I just bought a Readynas RN212 as a replacement for my Duo (v1). But the external USB drive (Toshiba 2.5 inch, ext3), that I used as backup for my Duo and always worked perfectly, is not recognized in the RN212.

  I have ssh - ed at the RN212 and did a manual mount: mount-t ext3/dev/sdb1/mnt which worked. The player ends up in/run/udev/data.

  Any idea what's going on?

  Kind regards

  Eric

  Hello espakman,

  This USB has data on the volume of your old Duo? If it is possible to format, use the NTFS system.

  If it contains all the data, it's that it may be preferable that you contact support for the RN212 so it can be verified from the backend.

  Kind regards

• Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?

  MacBook Pro (2015 retina) OS X 10.11.2 El Capitan

  Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?

  If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB.  You can post there to see if anyone has the answers.

  OS X El Capitan