Support reading per folder?

Similar Questions

• The switch SLM224G does support VLAN per port?

  I'm looking for a simple solution create two LAN. One for my own and the other for my clients, who will be able to use the desktop computer with internet access. I only have one internet connection (ADSL over ISDN) and wil not get another just for my clients.

  My own network should not be accessible or visible to users who use the PC clients. The other way around is authorized, but not really necessary. My setup requires me to connect to the switch to the (ISP) router, and the router has a LAN port not able to do anything related to VIRTUAL networks.

  I read on the VLAN port to put here, where it is stated that creating separate LAN is just the ports in VLANS on the switch, nothing else to do... However, they used a NetGear smart switch.

  I checked SLM224G of Cisco because it is affordable, has 24 ports (instead of 8 for the NetGear) and must support of VLAN. I read a lot about VIRTUAL networks, including:

  «- Means the VLAN per port that you can reconfigure the ports to be in different VLANS.» VLAN per port does not confirm the 802. 1 q supported VLANS.

  -802. 1 q VLAN means you can mark the VLANS with 802. 1 q headers to create a trunk between two devices carrying frames for several VLAN. 802 1 q VLAN confirms that there are also supported VLAN per Port. »

  I knew by the sheets that the SLM224G supports 802. 1 q (tagged) trunking. So it should be, given the text above, also supports VLAN per port.

  My question is if it indeed will support VLAN per port?

  I am able to use it directly behind the router of my ISP and create two separate LAN?

  If so, a supplementary question: how are the PC behind the switch (inside the two VLAN) removes the ISP router IP addresses? It will serve only of the two LAN or do I have to install a DHCP server in the other LAN?

  Any information is welcome!

  Thank you.

  Mr. Bertrand,

  
  

  I read what you posted and I don't think the slm224g will do what your configuration you want to.  The reason behind all this, if you have installed 2 VLAN you will need 2 gateways for each network.  Since then just the ISP router and a network.  I'd get a router capable of VLANs and plug it into the router of the Internet service provider and then you can have up to 4 networks behind your router.  The rvs4000 is a router excellent gigabits, which supports up to 4 VLANS.  So if you need additional ports, you can get unmanaged switches and plug it into the router for added ports.

• Need to view daq reads per second but only to record a reading every 10 minutes. I would also like to record the date and time, at the same pace. Need help

  Need to show daq reads per second, but only to record a reading every 10 minutes, need help

  You are also looking to taste to 1 Hz data acquisition?

  My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file.  For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.

  For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.

• Series E, how many MAX songs per folder?

  Guys, my e280 made only about 250 songs per folder. Is this normal? I have around 1000 songs in the can but not only did I not find other folders, I prefer have everything in ONE folder.

  Thank you

  George

  Sorry, but if the e200 has indeed a 250 per folder limit file, there is no way around it. You will have to create multiple folders, if you want to store more than 250 songs. If you do not want to bother with an organization of artist/album (or whatever it is structured in the same rigid way) as the tapeworm suggests, you might just name them folder1, folder2, folder3, etc..

  To play your songs in a random order, simply turn on "Shuffle" in the settings and play together. The e200 will find your files in any folder, they are in.

• HP EliteBook 8470p: Vpro Configuration not supported (reading) Errorlevel = 7

  I used AMTBrand tool for error "machine warning is not in condition.

  but this output with error "Vpro Configuration not supported (reading) Errorlevel = 7"

  any suggestion?

  Now all Ok Guy

  Put in touch with Hp Support.

  they sent the files and the instructions, as they provide guidance and now everything is ok.

  Thank you all for Guide.

• Completely make a read-only folder?

  Not just make a folder read-only, but making it so that nobody can make a change and feel that changes without saving it in a word sound, completely making it read-only. The contents of folder and that's it.

  Thanks for the comments, but my supervisor said they want the files to remain in the format they have. There is also an entire folder not only a couple of files. He wants everything to protect without changing the way the documents are now. Any thoughts?

  Hi Carlton,

  I suggest you try to influence policy from the file by changing the permission to this subject, but I doubt it will work because for all I know, the rights management services active directory has the ability to change the rights of a certain file/document, but please try it

  First, right-click on a document, and then choose Properties. In properties, go to the sharing tab. Click the user you want to change the permissions on a document. the reading selection. When you are finished, click share

  Then right-click on the file and then go to the Security tab, under the Security tab click on the user you want to change permissions. Check the read checkbox and uncheck the others. When you're done click apply then ok

  

• Why Photoshop doesn't support read/write of files .mpo?

  I'm really blown away that I can't find a single plugin of Photoshop that reads and saves .mpo files. Does anyone know why? And why isn't anyone talking about this format? I struggle to believe that nobody in the entire Photoshop Windows forum asked already on a total lack of Photoshop or an interest in support for .mpo files.

  If nobody knows how read/write the file .mpo directly through Photoshop, maybe someone could point me to resources for writing a plugin for this. It's a file format really very simple: there is no reason that a plugin must not already be available.

  Thanks in advance for your support.

  Jase

  Well said. In the end, it comes to the number. Development costs $, and if there is no hope to recover this cost, I doubt any software company will jump to support FTU. Now, things can change, but this depends on the number. At the same time, AVCHD is not easily supported by most of the NLE programs. Soon, the number reached a critical mass, and most of the software companies jumped on this train running.

  With the availability of the PS SDK, if anyone recognizes the need and the financial justification for this plugin, I think they will write a.

  It was similar, when struck with JPEG - 2K. It was going to be the future format/compressor. It took time to seduce the good, but when he did finally, Adobe added support. Over time, it is rather fizzled. Now, if it's still around, it's probably like a ' Goodies > additional Formats ' plugin.

  If I was on the Board of Directors of Adobe (or any other similar software company), I would ask to see the numbers, before I give my vote to continue the development.

  Fuji offers software for the DFO format? It works well?

  For me, it would be incumbent on Fuji to take the SDK and build a plug in PS, but I feel the same way on camera mfgrs., rewriting of the CODEC for video, who do not care to offer a such CODEC for editing. They leave THEIR pending clients, like the last leaf fall, in the wind. Were I have Fuji, I certainly would develop a plug-in for PS, the professional image editor more common on the Earth. They know their format, access access to the SDK and have a responsibility to their customers.

  Good luck

  Hunt

• My phone supports (read-only) BlueRay discs

  I guess my DS8A8SH disc is just a DVD burner?

  But if I put a Blue Ray DVD I'll be able to play or he not support BlueRay at all?

  Plug in GIS

  Please confirm

  Hi Racer... found this... looks like DVD - RW only...

  http://www.aztekcomputers.com/DS8A8SH-Liteon-2492171.html

  Zehn

• I can't uncheck the 'Read only' attribute with success a Program Files (x 86) folder. Help, please?

  Hello. I have mod Grand Theft Auto IV for pc. Long story short, I have the re - install. There is this called LCPDFR mod that allows you to become a police officer in the game. I need to download this. In order to successfully download this (when I try to download / save, he said "the Publisher of this program could not be verified". it gives me no option to run or something and that's it, apparently because of the problem I put in the title and Description), the root folder "Grand Theft Auto IV" (which is in my "Program Files (x 86)" folder) is not to be 'Read Only' (the 'Read only' checkbox must be deselected in 'Properties'). Do not forget that, under the tab 'security' in 'Properties', for the folder root of "Grand Theft Auto IV", I have administrators / me 'total control '. So, as I said, I uncheck the 'Read only', click on 'Apply', then 'Ok '. I go back in 'Properties' and 'Read Only' is checked as if I had never disabled it in the first place (when I already just did).

  So, in summary, the problem I have is that every time I uncheck "Read only", click on apply, then click ok, and go to properties again, it is always checked when I was already unchecked, applied and then approved it. This continues to be over and over and over again. Please help me?

  PS - I have windows 8.

  I thank you very much for your time and have a nice day!

  Hello. For some reason I'm not able properly to uncheck the 'Read only' attribute of a folder in my "Program Files (x 86)". Whenever I click to uncheck the 'Read only' in 'Properties' (tried several times) and click 'Apply', then 'Ok' and I go back to check it out, it is checked as if I've never disabled it. I have Windows 8. He continues to do this and I don't know why. Help, please?

  ====================================================
  Read-only status is normal for files because Windows ignores the
  attribute. Whatever the question is that you are trying to correct may not
  be associated with the State of the file read-only.

  If you change the attribute read-only folder... What follows
  the article covers Windows Server 2003, XP, Vista and 7... Perhaps it would be
  work for Windows 8.

  (326549) you cannot view or change the Read-only or the system
  attributes of folders in Windows Server 2003, Windows XP, in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/326549/en-us

• Fuze recognizes tags to FLAC? Can you navigate by folder?

  Hello

  I'm considering the purchase of a rocket, but there are a few concerns that I have.  I read a review that Sansa Fuze cannot browse records songs.  The review was a little old, so I don't know if it is still the case with a newer firmware.  Most of my music collection is torn in format FLAC with its own marking (I dunno if it of ID3 or not).  My question is whether or not the "rocket" recognizes the tags in files FLAC.  If it does not recognize those, and if it does not support the navigation folder, my music collection would become a mess in there for sure.

  So here, my 2 questions.  Can anyone help?  Thank you!

  dreamist wrote:

  Hello

  I'm considering the purchase of a rocket, but there are a few concerns that I have.  I read a review that Sansa Fuze cannot browse records songs.  The review was a little old, so I don't know if it is still the case with a newer firmware.  Most of my music collection is torn in format FLAC with its own marking (I dunno if it of ID3 or not).  My question is whether or not the "rocket" recognizes the tags in files FLAC.  If it does not recognize those, and if it does not support the navigation folder, my music collection would become a mess in there for sure.

  So here, my 2 questions.  Can anyone help?  Thank you!

  Yes, the "rocket" supports the folder navigation (with the latest firmware).

  Yes, it recognizes tags to Flac.

  I use it to listen to my music (mp3, wav, flac, ogg), audiobooks and radio FM, took a few records, keep a few pictures with me. Note that I have no use of videos on such a small screen. I like its ease of use (once I got used to it) and supported (I'm a big fan of Linux). Just to summarize: I have a friend...

• And still won't show CC desktop apps! So frustrating! I tried WHAT I read to try Office CC to show applications and still CAN 'T HEEEEEELLLP! I give up!

  Please, I beg you! can someone give me a good answer?

  I have a MacBook Pro and Yosemite, I installed it, uninstalled, reinstalled, Office CC. I have read and tried everything that is posted here and still NOTHING! I can not install applications and can not see the apps. When I run desktop after that about 3 min running, it closes unexpectedly.

  I spent days trying to solve this problem and I'm about to launch Adobe by the window... UGH!

  So frustrating!

  Someone at - it help him?

  From:

  http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.html

  Follow these instructions:

  Delete the file OPM.db and connect again

  Delete the file OPM.db and reconnection in the desktop application of creative cloud using the Adobe ID associated with your subscription.

  • Mac OS: You can locate the file OPM.db in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 Lion.
  • Windows: You can locate the file OPM.db in the \Users\\AppData\Local\Adobe\OOBE folder.  To show the hidden AppData folder, see display files, folders, file name extensions. Windows XP, Vista, Windows 7.

• LR4.4: Nex5 vs Nex5T is no longer reads the arw files

  My Sony Nex5 broken and is no longer available, so I bought the Sony Nex5T. I use Win7 on desktop and 4.4 of Lightroom. When I take photo with my Nex5, import pictures off the card into a "dump" file based on the date and the copy as DNG. I can get an overview of the photo and arw import to DNG without problem.  I shoot in raw to jpeg on both devices.

  With the Nex5T, I followed the same process as with the nex5.  However, now the 'Preview is not available for the file"and when I try to import,"files are not recognized by the raw format support in lightroom"both cameras are sony and use the arw format.

  I tried solutions: I reformatted the SD card, I made sure records were allowed to write (no read-only folder), I copied arw in folder and then tried to convert (did not work) and I checked the help discussions and google searched and cannot find a solution.

  I can use the dngconversion program, but it takes a long time. changes the name of the file so now jpeg and dng format are no longer associated with which is a problem for me.

  Lightroom 5 this would set? I consider the upgrade, but if it isn't, I don't want to lose money. I want the process to work with the new camera in the same way, he has worked with an earlier version of the same!  Ideally, I like to keep 4.4 lightroom. I'm still trying to learn to use it beyond the organization.

  Thanks for your suggestions.

  If you take a look at the 8.2 camera Raw and DNG Converter 8.2 now available seems to indicate that Nex5T support appeared in Lightroom 5 Sep 17, 2013. If Lr 5.5 will support RAW files.

  Otherwise, you will need to use the DNG Converter as you mentioned above.

• Conversion of a structure of entire folder of images in jpeg format, intact, and the folder structure.

  Hello!

  I have a fairly large folder structure composed of images dating all the way back to when I got my first digital camera in 98.

  The images captured by a variety of cameras over the years and also includes the types of images processed with the software. It's a mix of Holy of almost 1.5 tera-bytes of CR2, ARW, JPEG, PSD, PSB, TIFF, HDR and probably more I forgot. However, all formats can be read by photoshop/bridge. The structure of the file is/YYYYMMDD/file.ext. File conversion, per-folder using the standard bridge/photoshop Image processor feature is not really an option, given the size of the structure.

  What I try to do is to convert the entire structure in .jpeg, both for purposes of backup and also to be able to view all images on devices other than those from my computer. It is important that the raw files are converted with their respecive .xmp adjustment applied.

  Is there a possible way to do this? I have lightroom, but if she can do it I will buy it. Maybe other management image, like ACDSee, applications can do that?

  If anyone knows of any applications or scripts (photoshop) that can do this, or have any advice for me it's * VERY * appreciated!

  You can try...

  Pro image processor. Photoshop CS5 is required.

  http://blogs.Adobe.com/jnack/2011/05/new-image-processor-Pro-script-for-CS5.html

  or

  Image converter. Photoshop CS3 or above.

  http://www.scriptsrus.TalkTalk.NET/pp.htm

• Portege Z30 - B - 10 c: is THNSNJ256GMCU SSD supports hardware encryption

  I have a Toshiba Portege Z30 - B - 10 c with 256 GB SSD (exact model THNSNJ256GMCU).
  On the Internet I found weather mixed info, this drive takes in charge or no material encrytpion.

  Could someone help me find the answet to this question and, if it supports encryption.

  How to activate it?

  THNSNJ256GMCU

  Main features
  • Capacities up to 512 GB
  • Available in four Standard form factors
  • MLC NAND Flash memory
  • Low-power Devsleep feature support
  • The end-to-End data protection
  • Gravitational quadruple Code technology (reverse)

  More features
  • Translation mode which allows all disk configurations
  • Hot plug/OS-Aware removal
  Exclusive Toshiba • error correction technology, reverse (Quadruple gravitational Code Technology) support
  • Read only mode supported for emergency

  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• Internal card reader freezes Satellite Pro A due to bent pins

  Hello

  The stems of my internal card reader are folded due to a card of memory being glued and then removed.
  This causes windows to freeze at startup.

  Now I can disable the software etc. to stop what's happening, but what I'd rather do is to physically unplug the internal card reader, so Windows does not attempt to find it and crashed.

  Is it easy to remove the card reader internal?
  If yes then it would cost a fortune to obtain Toshiba to fix?

  I don't really want to spend a lot of money on something that is not a value of more than £200, which I intend to sell soon.

  See you soon,.
  Dave

  > but what I'd rather do is unplug physically the card reader internal, so Windows does not attempt to find and crash.

  Since the card reader is part of the motherboard, you can not disconnect it physically.
  In your case, there are two possibilities;
  Either buy and replace the motherboard (I think that it s not an option for you die at high costs) or you would disable this card reader in Device Manager

  Welcome them