HP EliteBook 8470p: Vpro Configuration not supported (reading) Errorlevel = 7

Similar Questions

• Multiprocessor Configuration does not support the installation of Windows 7 64-bit.

  I'm going as a joint discussion on the multiprocessor Configuration not supported during the installation of Windows 7 64-bit. I have a HP with a motherboard HP xw6200 workstation. The Machine has dual Zeon 3.20 Ghz. the procesors are identical. There bus 800 MHZ front. It has 6 gigs of 400 MHZ DDR2 Ram. I've updated to the latest version of the bios a few months ago. It has worked very well in dual boot with the last pack of 64-bit XP and Vista 64-bit SP1 for a long time. I tried to upgrade using a clean 64-bit Windows 7 installation when I got the error Stop Multiprocessor_Configuration_Not_Supported: 0X0000003E. I tried to upgrade to Vista and XP with the same error message. I also installed a new unformatted disk and tried to install the operating system again through the CD and got the same error.

  Hi ITCoreTeam,

  Welcome to the Microsoft Answers community.

  Test the material under test once, by contacting the manufacturer. The problem is caused due to hardware.
  Cause: This situation can occur if the incorrect processor packages are used or if the BIOS incorrectly allows a processor erratum.

  Download the update available in the link below and install it. It may solve your problem.

  http://support.Microsoft.com/kb/973879/

  I suggest you have a look at the similar problem and the troubleshooting steps by visiting the link below.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/b993c1f9-A1E2-4023-bc7a-0507189a1b8c

  I suggest you to contact the manufacturer of the computer to update the chipset drivers as you have updated the BIOS of your computer.

  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Speech recognition in Windows 7 could not be started because the lauguage configuration is not supported

  I looked at what others have said to solve this problem, but it still doesn't work. I changed the language and then restarted then changed back, I went in the regional language settings and change those, but so far, nothing has worked. I made the train together your computer once again and that works but then I try to open the program and it gives me the same statement again on the configuration not supported. Any help with the situation?

  Did you go to the control panel - language to see if your language is listed here? Also, what language you want to use? Speech recognition is only available for the following languages:

  English (United States and United Kingdom)

  French

  German

  Japanese

  Mandarin (Chinese simplified and Chinese traditional)

  Spanish

  Marty Markoe, MyMSSpeech

• We get an error "language is not supported" while tyring to start speech recognition program.

  * Original title: speech recognition a work stoppage

  When I try to start the speech, I get an error message it con could not start because the language is not supported and that the recognizer must be identical to the user interface and both are the English uk value.

  Someone at - it a response?

  Hi, Bill.

  Try this

  http://www.SevenForums.com/tutorials/179110-speech-recognition-language-configuration-not-supported-error-fix.html

  Windows speech recognition language must be identical to the language of the operating system in Windows Vista

  http://support.Microsoft.com/kb/934377

• EliteBook 8470p: EliteBook 8470p USB 3.0 ports driver not installed in Window 7 Ultimate 32 bit

  Dear Sir.

  I am facing problem in installing driver for USB 3.0 in EliteBook 8470p on Windows 7 Ultimate 32 Bit Port. So please say if 32-bit is taken in charge or 64-bit supported for USB 3.0 driver.

  its two USB 3.0 ports doesn't detect the USB 2.0/USB 3.0 or USB key (Flash DRIVE, portable, etc.)

  Please answer soon

  Hello:

  The usb controller you model posted ID indicates that your laptop is not a p 8470, but a p 8460.

  You need this driver usb 3 to this ID.

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe

  The 8470p have the Intel USB3 controller and the 8460 p have the Renesas Electronics USB 3.0 Host Controller.

  That's why I finally asked for hardware ID, because if you had a 8470 p then or the other of these Intel drivers I posted should have worked.

• EliteBook 8470p do not use more than 3 GB memoury

  In my HP elitebook 8470p I have 4 GB of ram but only 2.89 GB is used.

  By running it on Windows 7 Professional (32 bit). Why do you have that I have more than 1 GB of ram unusable. Is it possible to use it?

  

  Hello

  Please read the long explianation:

  http://blogs.msdn.com/b/hiltonl/archive/2007/04/13/the-3GB-not-4GB-RAM-problem.aspx

  Even with the 64 bit OS, some machines still needs RAM for the material. I'm working on a few machines that need 32 GB (no typo error) for the material.

  Kind regards.

• PowerEdge 1850: Need to add storage: ISCSI or SATA controller or? : Host does not support configuring passthrough

  I have a (non - VT capable) PowerEdge 1850 which took an ESXi 4.0 U1 (Dell Version) installation like a champ.  I know that I probably won't be able to have 64-bit clients.

  In this box of ESXi (laboratory

  Server) I have:

  • 2 x 73 GB SCSI U320 drives in RAID 0 array.

  • 6 GB OF RAM ECC

  • 2 x 1 GB NIC

  • 2 x PCI - X slots (PCI - X slot 133 MHz and PCI - X connector 100 / 66 MHz)

  I want to add more space "VM/Guest" and not spending too much money.

  What is my best solution?

  1. Find a compatible ESATA 3Gbps controller card (I have a nice 500 GB SATA Drive laying around)? ...

  2. Or should I get out an old box and throw a Gigabit NETWORK card and a SATA inside player and try my hand at Openfiler? I have yet to try it.

  3. ... Or... something else?

  Could someone help me hand choose either a PCI controller card - X ESATA/SATA (is - it possible or am I limited by my attached picture?) or a NETWORK card for my spare box (if it is not an old)?  I understand "_ _passthrough configuration"allows my virtual machine to hardware on the host computer directly, but I'm not clear how this effects my plans you want.

  I read:

  • http://www.VM-help.com/esx40i/esx40_whitebox_HCL.php#storage

  • http://ultimatewhitebox.com/iocontroller

  • http://www.VMware.com/resources/compatibility/search.php

  .. .but I am suspicious of money sinking into the material lest my PowerEdge does not support the Configuration PassThrough (does it matter?)  I still have to load a single guest.

  Thanks a lot for your time in advance!

  Get started with what you have. Do not pass anything. Set up the old PC you have as a NFS storage device. Use openfiler or? That will allow you to do some investigation/tests you want to do. Keep your eyes open for a local RAID controller or on an old server with lots of fast scsi storage you can add such as NFS or?

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• When I start my pc the monitor reads "mode not supported".

  unplugged my pc & MONITOR. When I plugged it back in & has tried to start it, it keeps reading 'mode not supported '.

  Hello!

  The pc is probably set to a resolution that does not support the monitor. Start in safe mode and set the resolution to the native wreck of monitors.

  To start in safe mode, you will need to press F8 at the moment of startup and select Safe mode.

  Let me know if that is not the case.

  Kind regards

  Joel

• Vista Home Premium will not read/recognize/burn HD videos taken with my Canon camcorder HDD21/AVCHD (MTS format). Results in the message stating "Windows Media Player may not supported file type or the codec that the file compressed.

  I have a Vista Home Premium 64-bit, Service Pack 2 Dell.  He read/won't recognise no videos HD taken with my Canon camcorder HDD21/AVCHD (MTS format).  Each attempt generates a message stating "Windows Media Player may not support the file type or the codec that the file compressed.  I used a Windows 7 PC, which allowed me to play the video from the camcorder and burn a DVD of the video to share with the family.  I'd appreciate any help.  Thank you

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  For better support please try the Microsoft Vista for photos and video forum instead. http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Windows ip configuration is an internal error: the request is not supported

  I cleaned up a few viruses out of a Windows XP Professional computer to a customer, and now he can't go on the internet.  When I check ipconfig, I get the following error.

  Windows IP configuration
  An internal error has occurred: the request is not supported.
  Contact Microsoft technical support for more help.
  additional information: host name of request impossible.
  So I googled some results. Have replaced the TCPIP.sys file with one from another computer, I still get the same message.  I don't have a windows XP original disk to put it into recovery mode.
  I also ran the command "netsh int ip resetlog.txt" but which did not help either.  I saw on another blog.
  The NIC is to see that there is a power cable plugged into it as well.  Help, please!
  Thank you
  Trever

  Hello Trever,

  Follow the methods and check:

  Method 1: You can refer the following Microsoft Knowledge Base article and check.

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Let us know if that helps.

• What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  Hello

  1 how long have you been faced with this problem?

  2 have you made changes on the computer before this problem?

  3. when exactly you get this error message?

  The following threads may be useful:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-from-webpage-not-implemented/d09fa331-92c6-4CD3-bc89-9a2c03e304fe

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn

• Error: cannot read file, Protocol not supported while watching a video

  Original title: can't access a video

  I try to watch a video and I get a message, can't read file, Protocol not supported, this is something new? never seen this happen until today.   I'm not good with computer, so I have no idea what to do now? I hope someone can help me

  Hello

  You can read the following article and check if it helps:

  Error message when you try to use Windows Media Player to stream audio or video from Windows Media Services: «the specified protocol is not supported»

  http://support.Microsoft.com/kb/940029

  Also check out the following link and check if it helps:

  http://social.answers.Microsoft.com/forums/en-us/xppictures/thread/02a93593-F483-4B50-836C-391acfbe8b83

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "' Error of speech recognition: voice recognition couldn't start because the language configuration is not supported.

  OP: Windows speech recognition

  Hi, I have a Dell Inspiron 1545 with Windows 7. I just put in place the Windows speech recognition and finished the installation and the tutorial. I went to use and it says:

  Speech recognition error

  Speech recognition could not start because the configuration of the language is not supported.

  The recognizer language must match the language of the user interface. Please change the recognizer language in the speech recognition under Advanced options control panel.

  I don't know what that means, I tried changing the settings under:

  Control Panel > accessibility > speech recognition > speech Advanced Options

  But nothing seems to work.

  Help!

  Hello

  Saw this in another forum and it WORKS!

  Hello

  I had the same problem. Strangely, I had other symptoms. I use the Turkish keyboard Q primary and English as secondary United States. As my speech recognition broke down, I saw that my office word and outlook mulfunctioned in what concerns the language of the keyboard. I was able to use the Turkish Q keyboard on any application, but when I open outlook or word, changes in the English language.

  It happened on xp for... so I turned on the language bar to assign the TR when I am using these applications. But the language bar never himself displayed on the bar of tasks or office. So I get this problem and I saw that you can solve this problem via regedit.

  go to computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  right click on the right and a new "string value" component name value can be by default, the value data must be set to "ctfmon" = "" CTFMON. "." EXE ".

  After that I restarted my machine and the language bar came to the taskbar. I went into applications and changing the language to TR. And there was a surprise for me. Speech recognition long gone was back at the top of the screen. (I tried everything that proposed that nothing worked)

  I'm not sure but maybe the difference in language between applications caused my problem. Or maybe ctfmon has caused. Try this one.

  I hope that this is the case for you and you can fix it too...