Support shared Windows volume via ESXCLI?

Similar Questions

• Cancel the MAPPING of Windows volumes?

  I don't know about scsi unmap command for vmfs recover space on a LUN EQ. Is there an equivalent for Windows data volumes connected via iscsi?

  Hello

  On Dell PS Series San, you must run EQL FW, 6.x or higher and the volume cannot be set up for EQL replication.  It is as well rep SYNC and async rep.

  Much depends on the version of Windows that you're talking about.  Windows 2008 R2 and do NOT naively support UNMAP.   It does support the SSD TRIM command.  However, if you install the printer Dell HIT / ME software he installs a driver to modify the order ADJUST order cancel the MAPPING on the fly to Dell PS volumes.   This applies to volumes that are DIRECTLY related to the EQL volume via the MS iSCSI host initiator.  A virtual machine on a VMFS partition is not supported by HIT / ME software.

  Windows 2K 8 and CSV de Hyper-V R2 volumes does not support UNMAP.  This is a MS issue, unrelated to the table.   Volumes Windows 2012 and R2 CSV can bear UNMAP only when you use virtual disks VHDX, if using the recovery of old VHD is not taken in charge.

  An additional advantage of HIT / ME in all cases taken in charge, is through the crib of Snapshot Auto GUI, you can force recovery anytime option.

  Note: If you are using snapshots, you can not immediately retrieve the expected amount of rear space.  The snapshot can always refer to this data, so until the snapshots that reference is deleted it will be allocated.

  Kind regards

  Don

• CS5 save for Web doesn't let me save in the Windows volume

  I have a Windows Server 2003 volume mounted via the Services for Macintosh (AFP, SMB, no I'm pretty sure). Even if the Mac and the Windows volume can control independent of filenames longer than 31 characters, due to the sustainable management of FORESTS (I guess) I've never been able to record directly from any application to this volume of Windows with a > 31 char filename. This has never been a problem that I kept my short file names.

  After installing just CS5, however, save for Web is not let me save any file, no matter how the nickname: "names of more than 31 characters only are not supported on the destination volume. I can't save for the Web very well on my desktop and save under... the volume of Windows, but not save for Web for Windows volume.

  The save for Web is set to 'Pictures' only (no slices so it's only to create a single file).

  Any thoughts? Known issue?

  Thank you.

  Maybe that's part of what happens (and is not something like our names, internal files or anything else I recognize).

  It's probably something internal to save dialog box (NavagationServicesSavePanel), and it assumes that the file systems will be able to handle the long names.

  Again, via SMB to connect to the server may remove part of the restrictions.

  CS3/4 was based on carbon and used the different APIs for a large part of the file structure.

  CS5 moved to cocoa and has a new set of API files to process.

• When the old Macs will support Win 10 install via Boot Camp

  Currently oldest Apple machines don't support not Windows 10 when it is installed via Boot Camp - using 10 Windows on your Mac with Boot Camp - Apple support I do a fresh install of Windows on my MBA 2011 environment which is not listed as being supported - obviously a lot I prefer not to buy and install Windows 8.1 (which is supported using 8.1 for Windows on your Mac with Boot Camp - Apple support) and then more later to buy (now MS free upgrade offer was withdrawn) and install Windows 10.

  Apple will fix this situation ensuring that older machines are supported on Windows 10 and if so when?

  not sure that they will not be 99%

  your options are to install windows as a virtual machine 10 using something like oracles free box virtual vm

  or like me who was to install windows 7 in bootcamp and when win8 came out I've updated win7 from inside win7 for win8 and later to win8.1 then win10 and now 1 year win10 editing, there is no official driver win10 for my system as it is so there mix of win8 drivers and drivers win7 and some features are absent as access to osx workout and bootcamp tool

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Unable to access a windows share via a VPN

  I have two networks connected via a VPN (two dd - wrt routers).

  I can ping and access some devices on the network of the client network host. However, I can't access the shared windows resources. It says that it cannot connect.

  Two computers one XP Pro.

  Thank you

  Hello

  You can post your request in this link for assistance.

  http://social.msdn.Microsoft.com/forums/en-us/categories/

• Help: Java VM: Java hotspot Client VM (mixed mode 20, 4 - b02, sharing windows - x 86)

  A fatal error has been detected by Java runtime environment:
  #
  # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x77c2743f, pid = 8104, tid = 552
  #
  # Version JRE: 6.0_29 - b11
  # Java VM: Java hotspot Client VM (20, 4 - b02 mixed mode, sharing windows - x 86)
  # Problematic frame:
  # C [ntdll.dll + 0x6743f]
  #
  # If you want to submit a bug report, please visit:
  # http://java.sun.com/webapps/bugreport/crash.jsp
  # The accident happened outside the Virtual Machine Java to native code.
  # See problematic frame for where report them the bug.
  #

  ---------------  T H R E A D  ---------------

  The current thread (0x04b6cc00): demon JavaThread "AWT-Windows" [_thread_in_native, id = 552, stack (0x01b90000, 0x01c90000)]

  siginfo: ExceptionCode = 0xc0000005, address reading 0 x 00000004

  I really need help.  I have always used Mozilla Firefox and have played on Pogo since 2003, takes up all of a sudden EA Pogo and I am forced to use
  Internet Explorer (which I despise does the minute go you internet, all sorts of things related to a "computer with so many messages) in order to play my Pogo games.  And the games I play are rarely in one 'room' with others, with the exception of Bowling. Because this happened to me a week before I got that three of these notices in one day with the title 'hs_err_pid8' or '3' OR '4' OR '12 '.  YOU WILL NOTE THAT THE MESSAGE is kind enough to tell you where to go to REPORT this bug.  However, when you go there its all about buying so much PC CleanUp, Scan and fix, etc., but nowhere is a place to report.  I spent the last four hours trying to get this fixed with no result.  Furthermore, I saw today a statement that my Active X is damaged and I can't or I can't any reservation on it.  When I tried to download the latest Java program, I followed the instructions to mount and uninstall the previous.  I went into my program and there was only one of these (TM6_update30 Java) dated June 2010. I tried to uninstall it and after 92 minutes, I cancelled it.  Now, he is still listed here and one installed is not there.  It is a nightmare because of EA.  Can someone HELP me WITH THIS PROBLEM OF JAVA AND ACTIVE X?  I would be very grateful.  Thank you

  Hi Reneeinmay,

  I suggest you to contact the support of game Pogo for assistance.

  In addition, you can also ask your question in the MSDN forum:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• I bought Windows 7 via the webshop of Microsoft and I am not able to download. Please tell me what to do

  I bought Windows 7 via the webshop of Microsoft and I am not able to download.  Please tell me what to do

  Software download: http://www.store.microsoft.com/Help/Software-Downloads
  # You'll use your Windows Live ID to sign in to your bank account of Microsoft. If you have forgotten your password or need to reset, you can do this by clicking on forgot password?
  # After typing your e-mail address and password, click Sign In.
  # History under purchases, find the product that you have purchased and click Download.
  Select Windows 7 64 bit and proceed to download.
  --------------------------------------------------------------------------------
  Select Windows 7 64-bit or 32-Bit . ISO file version and proceed with the download.
  --------------------------------------------------------------------------------
  # To start your download using the Download Manager, click Download.

  Download information manager:
  http://www.store.Microsoft.com/help/Download-Manager

  =============================================================

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  Contact the Microsoft store:
  US: http://www.store.microsoft.com/Help/Contact-Us
  1-877-696-7786
  Canada: https://www.microsoftstore.ca/shop/en-CA/Contact-Us

  ============================================================

  Burning a file of Windows 7 ISO on a DVD:
  http://support.Microsoft.com/default.aspx/KB/977640

  Windows 7 USB/DVD download tool:
  http://store.Microsoft.com/help/ISO-tool

  Alternatively, you can use one of two utility software to make a DVD bootable from a .iso file
  Download and install burn ISO Gear:
  http://www.GearSoftware.com/gear-ISO-burn.php

  Or use ImageBurn:
  http://www.ImgBurn.com/

  Note: Always use the slowest speed possible (4 or 8 X) burn and DVD + R media.

  J W Stuart: http://www.pagestart.com

• 22/07/13 - caveat, 'ZIRCON SYSTEMS, TECH SUPPORT FOR WINDOWS' CROOK, USING THE PLOY of id # 888DCA60-FC0A-11CF-8F0F-00C04FD7D062

  Last week, and now on the longest phone conversation with me this morning, Mon, 22/07/13, phone swindler wants to CHECK the ID NUMBER OF YOUR COMPUTER.  A 3rd call repeat 'husband' today, from "Steve Matthew," of "Zircon systems", where the staff is all "Microsoft Certified technicians".  Said our PC has been disconnected from the server "universal routing" and needed to check the identification number.  Said computer infected and disengaged, errors with malicious files.  That 50% of Microsoft applications does not.  Finally, after several questions polite but stupid me, as if to say but our computer works OK?  the appellant was told that he is temporarily hung up a temporary server! but it must be reconnected...  After having his name and telephone number - strongly Indian accented man "Steve Matthew" on the phone # 408-498-3608, and have patiently give me the 888DCA60 etc etc 32 numbers, he indicated that he understood my being suspicious, but it is a Microsoft Certified tech, calling for Windows, have we not Windows 7 or XP or Windows 8, etc.?    And he said I could not find the computer ID number easily, it wasn't on our guaranteed purchase paperwork, etc, that I would need to go online with him, to find our location.

  Knowing that registrations for computers, go directly to the manufacturer only if you send the information on your purchase, and that no known iin manufacturer sends the modern world 'Oops, you're disconnected' phone calls, it seemed a bit of fun to keep to provide information...

  So I explained to Mr. Steve, when he repeated for the 4th time that it has been certified Microsoft Tech and trustworthy and kept warning me that our computer would break soon, that, by analogy, certified Subaru Techncians had simply taken a few classes to automotive Subaru training and were not necessarily qualified or guaranteed to work on my car the certification does not matter, you should still consult your dealer, the garage, make sure it's good reputation.    Then, I asked him directly, so, on a phone call from me, a total unknown, he would be willing to send me or transfer to me $2 000,00.  He actually misses, in dismay.  So I repeated it-$ 2,000, say, in US dollars, would it send it to me, if I had called and told him his bank account had been disconnected from his bank, and I needed to reconnect it?   He ate and asked me ' you mean $2,000! $? ' so I said yes, would he give me or transfer to me on this amount, based on a phone call?  He said absolutely not.  End of quote.   I told him how we would check with some type IT geek friends we know, took his phone, name and said I would be back to him and please DON'T NOT CALL BACK IN AN HOUR, BUT PUT us WE HIS DO NOT CALL LIST.

  At this point, I googled Zircon systems - and there is no such American society less than a jeweler or invest co. in Illinois), although I had a systems Zicom in India, which seems to be the sale of legitimate & electronic security systems and then I googled the identification number, find some great ads about what happen and asks what will be PayPal scam, if one agrees with the appellant and goes online and follow their directions.

  (See mutation 2012 of a David Jacoby to http://www.securelist.com/en/blog/208193750/ , who described a telephone scam quite similar, with the technical information, copy requested screens, orders).   Maybe giving a technical support genuine or scam to support people on your side, an idea of what was going on my caller to walk me through, if I had fallen for the Universal Server disconnected claim it does?

  Hope this helps to update your information, files.

  In any case, this is my first time ever having reported a telephone scam.  Thought it would do, seems since then I received a call from update and more sophisticated scam.  My husband simply hung up on the caller last week - he knows little re our PC, I ask more tech-savvy people to help if necessary.  But then, the scammer called back, too.  If something had to be done to put an end to the process?

  Don't forget, if you get that kind of call, simply ask the crook to trust YOU, say that you are a certified technician to bankruptcy with years of training from the IRS.  Ask if he is personally prepared to transfer $2 000,00 to you (via Paypal, do not give your bank account to him for any potential future direct deposit!), but preferably by cheque of... And it must be sent to the address of your worst enemy in life, as you need the alimony to a former spouse.  Or to a mailbox in a different city than your...  And then tell him you'll telephone him with the identification number of your computer, once you have verified that the money is in hand.

  Done politely, in a pleasant soft voice, you would be surprised how unprepared the scammer or snow must be befriended as a simple employee, but itself for you send funds then asked?  I'm looking seriously for the money from them here - I'm not asking in fact send me $2,000, but I said that I was trying to explain by analogy, with auto - trained technicians and requests for money, why I wanted to check with the best-known people before giving identification numbers.  Analogies, it seems well understand what we hear - an example?  I just him speechless when I wanted a large amount of course him sent me instead...

  Uh, Mr. Steve Matthew, Zircon systems, technical support for Windows company, also clearly didn't "want to send me a few thousand, and he hung up, after I suggested that he does not call again, asked him to put us on the list of subscribers do not call...   Clearly a new variant, although, in the wick on the Microsoft Certified Tech claims, the name of Zircon systems company and so I thought after that.

  Hello

  I had a similar call from Indian women (?) strongly accented called 'Janet' of 'Zedconnsystems', based in Floria, USA. She had called asking to speak with my roommate to tell her at the computer (which is mine) showed the error messages.  She shook off the usual garbage and was unable to answer most of the questions I asked, but gave his phone number as 4084983608.

  As far as scams go this one seems rather transparent, but mention on the off chance someone saves a load of hassle!

• Install Windows 7 via remote assistance

  Hi people, I have searched for an answer but does. My apologies if the question was asked. I'll try to keep it as short as possible.

  The question in short is - IS it SAFE TO ALLOW a COMPANY (I HAVE NEVER TREATY WITH) ACCESS to MY PC BY the DISTANCE FOR INSTALLER WINDOWS 7 SUPPORT?

  I bought a PC refurbished on Amazon and a few days a message began to appear saying "Windows 7 build 7601 this copy of windows is not genuine", "may be wrong" and in the control panel ' you must activate today activate windows now '...

  I contacted the seller, and they said they will update or rather install windows 7 via the remote assistance, IS safe? I LOOKED INTO THE COMPANY AND MAY NOT BE CERTAIN THAT I HAVE CONFIDENCE IN THEM? I contacted Amazon and they said that they do not tolerate the actions of this company and that if it is not solved I will be refunded to you. I imagine that if they have a moral of windows 7 for me, they could all just give me the numbers or send a copy of it? I really appreciate any help or advice, that you can provide. Thanks a lot MF

  Hi people, I have searched for an answer but does. My apologies if the question was asked. I'll try to keep it as short as possible.

  The question in short is - IS it SAFE TO ALLOW a COMPANY (I HAVE NEVER TREATY WITH) ACCESS to MY PC BY the DISTANCE FOR INSTALLER WINDOWS 7 SUPPORT?

   

  No, it isn't, it's probably a scam.

  I bought a PC refurbished on Amazon and a few days a message began to appear saying "Windows 7 build 7601 this copy of windows is not genuine", "may be wrong" and in the control panel ' you must activate today activate windows now '...

  I contacted the seller, and they said they will update or rather install windows 7 via the remote assistance, IS safe? I LOOKED INTO THE COMPANY AND MAY NOT BE CERTAIN THAT I HAVE CONFIDENCE IN THEM? I contacted Amazon and they said that they do not tolerate the actions of this company and that if it is not solved I will be refunded to you. I imagine that if they have a moral of windows 7 for me, they could all just give me the numbers or send a copy of it? I really appreciate any help or advice, that you can provide. Thanks a lot MF

  Here is an example of the scam you experience:

  http://arstechnica.com/information-technology/2013/04/the-spammer-who-logged-into-my-PC-and-installed-Microsoft-Office/

• I tried to buy Windows 8 via PayPal, but never had.

  I tried to buy Windows 8 via PayPal, but never had.

  We understand that some customers have purchase Windows 8 problems with their PayPal accounts. We apologize for any inconvenience this month of may have caused and appreciate your patience.

  If you encountered this problem and have an unresolved billing issue, please contact a http://support.microsoft.com/gp/esd-support-phone-numberscustomer support agent.  Please note that you may need to contact your bank for any authorized transaction that did not pay.

• How can I have my client Win8 continue to be supported by Windows Home Server v1?

  I've updated from Windows 7 to Windows 8, and now my Windows Home Server v1 cannot back up my laptop. The connector software complains about volume errors and complains about the ESM may not take a snapshot of the customer volume. Help, please!

  None of the two versions of Windows Home Server can back up systems of Windows 8. The first version of WHS is no longer supported and probably will not be updated to add this support.  Windows Home Server 2011 can be updated, the last word of Microsoft on this subject was "Stay Tuned!"

  If you want a definitive answer, post it in the Windows Home Server support forums.

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• The Adobe Labs Cirrus Server does support Shared Objects?

  Anyone know if the labs of adobe cirrus free service provides support for remote shared objects?

  Im trying to use a remote shared object to communicate between instances of my NearID flash application.

  Synchronization event does not fire after setting a property on the shared object, no errors are triggered either.

  function initialize (): void {}

  try {}

  SO = SharedObject.getRemote (false "distinctive sign", NetConnection.uri),

  }

  catch (error: Error) {}

  status_textbox. Text = Error.ToString;

  }

  SO.addEventListener (SyncEvent.SYNC, syncUpdateHandler);

  SO.addEventListener (NetStatusEvent.NET_STATUS, netConnectionHandler);

  SO.connect (NC);

  SO.setProperty ("nearid", NC.nearID);

  }

  function syncUpdateHandler(event:SyncEvent):void {}

  status_textbox. Text = "Sybc Trigerred ';

  }

  The help is much appreciated, thanks in advance.

  the name of Cirrus service code does not support shared objects. Cirrus isn't FMS.

  the * only * things done Cirrus are: accepts client connections P2P Research/introduction by peerID, bootstrap group RTMFP (via "server channel" if active group) and a short message relay function.

  things Cirrus does not: save data, stream video on demand, relay of client-to-Server stream between connected clients, shared objects, scripting on the server or any other function FMS side performs.

• Apple dropped support of Windows 8 in macOS Sierra?

  So I upgraded my MacBook to macOS Sierra and I noticed something different in the BootCamp Assistant.

  As the official macOS page Sierra said, the new BootCamp installations require Windows 8 and 10.

  But when I opened the BootCamp Assistant, he made only 10 Windows or USB later.

  

  So what is the significance of this? Fall of Apple already supported for Windows 8?

  W8.1 must always be supported. If you point to W8.1 ISO, you get error messages?