Support UTF8 throughout the BONE

Similar Questions

• X 360 spectrum (4110dx): reverse the scrolling is not consistent throughout the BONE

  I just got my X 360 spectrum and I have two reverse scrolling issues:

  1 scrolling on the Touchpad does not always work. I found the option to turn it off (when I slide down, I want the screen to do the same thing), but it works only in some applications, like Google Chrome, but not in the settings or Windows store. Is it possible to get this to be consistent in all of everything?

  2. in addition, it resets after that I restarted my computer. My choice can be set to a default value?

  Thanks for any help.

  Hello

  Try the following.

  First, download the installer of the Synaptics driver from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72919.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  When windows has reloaded, hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to force the lightroom Installer to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• Windows Update has disappeared from the BONE. __

  I am using windows 7 32 bit.
  Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
  Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
  Seems that windows update has disappeared from the BONE.

  Hello

  Welcome to the Microsoft answers community site. I suggest you try these options:

  Option 1: Make sure that Windows Update Service is running, or if a force start it takes

  1. open run it and type services.msc, and then press ENTER.

  2 locate the underside of services in all install services list.

  Windows Update (a)

  (b) BITS (Background Intelligent Transfer Service)

  (c) cryptographic Services

  3. check that the status is started. If the condition column is blank, right-click on the service and select start.

  4. always make sure that the Startup Type is set to automatic, and then restart the computer.

  Option 2: How to reset the Windows Update components?

  Run the Microsoft Fixit tool to reset Windows Component Update.

  http://support.Microsoft.com/kb/971058

  See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Option 3: search for viruses and malware

  (A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

  Or use Microsoft Security Essentials - free

  http://www.Microsoft.com/Security_Essentials/

  (B) check for the shape of software malware malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.mspx

  Or

  Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• (Redirected) poweredge 2950 change all readers while keeping the BONES

  I have a poweredge server 2950 with 5 x 145GB sata HDD and installed a windows 2008 R2, and I SAS 6 x 2 TB hard drives which I bought to upgrade all the hard drives on the server, how can I do that without losing the BONE? I'm new on the environment and I would be grateful to give me advice and measures on this matter, thank you very much.

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• Is it possible to extract the BONE (do 'image') of BB 9000 "BOLD" to blackBerry smartphones

  Hi all

  I have two bold 9000. Today I 'accidentally' removed the operating system on one of them with the help of the JavaLoader (of JavaLoader wipe - an option). Now I want to reinstall the same OS that I had. I have not found my service provider in the list of BlackBerry download sites.

  Is there a way to extract the BONES of my second BB BOLD 9000 so that I'll be able to install it on the one I wiped?

  Thank you

  Ilia

  Hello

  I do not know if what you're asking, it's possible, but it is also not really necessary. You are not limited to your own package of carriers OS (if it's quite strange that they are not on the list...). You can use any carriers OS package... the only drawback is that if you use a version that is not supported by your operator, you can go back to their supported version if they refuse you support (they can).

  This is the best method I found for the installation of any OS for a BB:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  If you do not use a bundle of BONES other than your home carrier, then insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML.

  Good luck!

• How to create a CS5 ZXP throughout the CC2014 using ucf.jar

  Hello world

  I use a version of maven to generate a CS5 ZXP throughout the CS6 for InDesign. Now, I would like to add CC and CC this ZXP 2014, while I have a universal ZXP for all my versions supported.

  I use the ucf.jar to generate my current ZXP. I tried to add my mxi CC and CC2014 to install on these versions.

  The ZXP generate well and can be installed without any error in the installation of signage. But when I run the application InDesign CC 2014 for example, my native plugins behaving oddly.

  I noticed in the technical notes on the FCU, which mentioned versions are until CS6:

  Adobe Exchange

  I've seen other technical notes speak ZXPSignCmd to package a ZXP, but with do not mention anything on a supported version:

  http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/creativesuite/PDFs/SigningTechNote _ CC.pdf

  I tried my extension with the UCF package, but InDesign CC 2014 seems to not work properly with installed extension once installed. I noticed the symbolic links in plugins installed here where it is replaced by the sharp the link file.

  I tried my extension with ZXPSignCmd of packaging, but Extension Manager CS6 tells me that the ZXP does not contain a valid signature.

  Not there at - it no way to create a universal ZXP works on all these versions?

  Hello world

  I had the chance to talk to Fraser Gregor, developer at Adobe involved in the development of tools of ZXPSignCmd. He told me that it was impossible to generate such ZXP this way.

  UCF.jar is a tool for InDesign CS6 and earlier versions. ZXPSignCmd was designed for the CC and latter versions. The solution, he offered me was to have a ZXP for any version under CS6 and a ZXP for any version of the latter as CC. Then he told me to have a ZXP wrapper to hold both of them. As a result of this way, I can have a universal ZXP.

  It's a little more work, but it should work. To create the universal ZXP, we can use ZXPSignCmd.

• Hi, I read your support page that the News widget is available only in the United States, the United Kingdom and Aus. When will it be available in Norway?

  Hi, I read your support page that the News widget is available only in the United States, the United Kingdom and Aus. When will it be available in Norway?

  Hello

  Just to let you know, it is a user to user community. You do not directly communicate with Apple here, so no one can say if or when Apple may have available in your area News widget, but what you can do is to provide feedback to Apple > http://www.apple.com/feedback/iphone.html

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Can I repair the BONES using recovery without loss of important data CD?

  I have a problem with my laptop Satellite 1100. The windows OS is somewhat damaged and now won't start. I tried the usual 'use last good config' and boot into "safe mode" but none of these work.

  Is there a way using the product recovery CD to fix this without losing the photos and important documents?

  Any help appreciated.

  Hello

  Restore CD provided you can install new OS. There is no option for any type of repair of the BONE. I don't know how your disk is configured, but if you have 2 partitions, and all your important data is backed up to the second, you can install the OS on the first partition using Expert mode.

  Right now, you can try to get the facilities of Microsoft CD and try to repair the operating system preinstalled.

• Camileo H20 - strange noise throughout the video

  Hello.

  I today received delivery of my first camcorder, which as the title suggests, is a Toshiba Camileo H20.

  Overall, I am impressed with this little camera, but there is a problem that concerns me. After reviewing a video of test, I created to see what the quality was as I noticed a strange sound throughout the video. I struggle to describe, it's a bit like static/interference. The thing is that I already have some tests to find out what could be the cause of it, and I found nothing. Again, the camera records audio as usual, but this static/interference is there with her.

  At first I thought it's maybe because I'm close to electronic devices such as a TV and a PC, so I went in my new garden and filmed there, but noise persists. Then I covered the microphone to see if it makes a difference, but it didn't. I also tried different video modes, leaving the camera on a desk to record walking around a room and then I even resorted to transform a sound recording off altogether. The strange thing is that the camera has always been that noise when I play the video on my computer even if no sound is registered.

  I have a slight suspicion thinking he made this noise if the camera is moved. But if I remember correctly it makes the same noise when it was not moved on the desktop.

  Someone at - it ideas on how to solve this problem? Preferably not by reference. I would like to, but I don't have time because I'm going on vacation next week and I want the camera to do this.

  Thanks in advance.

  I'm downloading two videos on YouTube in VGA mode and 720 p. Once they are uploaded I will edit this post with the links.

  HD:
  http://www.YouTube.com/watch?v=EqxzQi5G0Sc

  VGA:
  http://www.YouTube.com/watch?v=9fMjfIqK09Q

  Quality cannot be correct because they have just the end of the download.

  Hello

  I have no idea why this strange sound appears, but I found in the manual of the user an interesting point.
  You can disable and enable the sound of keyboard and operating noise.
  In Submenue setting, press the button to go to the audio menu. Use the left/right keys to select ON or OFF. Press the menu button OK to validate the settings.

  The other point is that you said that this noise appears when you play the video on your computer. Maybe it's just a s codec problem.
  I remember that the sound on my movies created with the HD cam is really strange questions wore on the package of codec missing on my laptop. In addition, the player didn't manage HD sound.
  I chose the stereo settings and then the sound was ok

  I'm not very well if this might be a reason in your case but it s m worth a try
  Check the sound configurations and try to install some codec packs too

• hp support assistant for the new version update is not installed

  HP Pavilion Slimline s5306ukP; Monitor LCD 20-inch HP 2010

  My problem is that I recently had a HP Support Assistant alert to download the new HP Support Assistant for the latest features.

  Well I tried to download the update, but it would not install? I'll go through the events on the screen and maybe you can inform me as to why this update for the new Assistant support will not correctly installed, thank you.  Everything goes up to 4. Then it will skip "Download updates" and go on 5 /, but nothing happens?

  Point adjustment 1/restore... pass; 2 disk space / audit... pass. 3 / connecting to HP services for new updates and alerts... pass. 4 / download updates... N/a; 5 / install/apply the selected items... no?

  Should I have to uninstall the version that I already have the update through and re - install a new Version, or you have any patch that can be applied to make this update installs successfully?

  I have Windows 7 Home premium 64-bit.

  Hi DP - K,.

  I tried again since my last email with the problem where I couldn't find the program once it is downloaded, and alongside the race/Save little was downloaded files. I clicked on it and watched the sp54931.ex download in a folder "view and track downloads. I then told run this and asked that my administrative password. I thought here goes while I'm waiting for a response from you, nothing to lose to new and low and here is the update for the new Version HP Support Assistant downloaded correctly. Since then, I had a glance in the desktop program and there is no warning, everything is up-to-date.

  If all is well now and I can't thank you enough for all your help to try to solve this problem for me. You are the experts, and I was just lucky. I sincerely thank you.

  Best regards

  Gerry

  PS I will now know where to go if I have more problems... experts.

• Search table for 0 or 1 throughout the course of

  Hello. I have a column of data with 530 000 lines. The only values are a 0 or a 1 (1 represents the occurrence of an event; 0 does not work). I would like to be able to determine the amount of 0 seconds between each consecutive occurrence of 1 throughout the whole picture. For example, I would be able to determine the number of zeros (e.g., lines) between the first and the second 1, the second and the third 1, third and fourth 1, etc., and then determine the average. Using 1-d search function array makes it easy enough to do for a few instances, but I can't find how to search in all the lines of 530 000. Thanks in advance for your help.

  

  MattStock1984 wrote:

  Forgive my ignorance, but implementation of a reading of the worksheet with an indexed table leads to a constraint on the U8 function point and my average output is the size of the array (e.g., length of string). Can you tell me where I'm wrong? I have attached a sample data file that I use.

  
  
  • Nothing wrong with coercion. (However, I told you to convert in U8 in my instructions to your table of preparation)
  
  
  • You have not added 48 as in my code. Why not? (If you add no 48, your delimiter must be defined as a character unprintable special (x 01), making it difficult to read code. (Also, if you do not add 48, the character '1' (ASCII 49!) will never happen and you get the full length as expected).

• What is the function of support biredirectional activate the tab of the printer properties ports?

  What is the function of support biredirectional activate the tab of the printer properties ports?

  Back in the day, the printers were an output device only when the computer would simply send your print job to the printer and it would print (or not).  Now printers 'reply' to your computer and notify you levels of ink and toner low, paper jams, termination of success/failure, etc.    Enable bidirectional support allows the printer to 'reply' to your computer.

  HTH,
  JW